Is it possible to send a request for report pagination?

Hi,
I have a page with 3 regions.
Only one of these regions is displayed depending on a special request.
This works fine as long as we don't push the select list for report pagination.
Do we have any possiblities to send a request when we select another rowrange from the pagination select list?
At the moment we don't get a request after selecting a new pagination.
The result is that after the pagination there is no region displayed.
Thanks in advance
Ulrike

Ulrike - For reasons like this, it's best not to use REQUEST to control page rendering behavior. Passing an item value so that it stays in session state gives you more flexibility, e.g., P1_SHOW_REPORT:YES.
Scott

Similar Messages

Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for retu

Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for return the ipod

Best thing would be to call Apple up again, and let them what has happened and they'll help you!

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

Hello,
You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
Enter a name for the connection and click OK.
In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
In the final pop
-up dialog, set the communication settings for communicating with your device.
Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
Grant M.
National Instruments

Is it possible to send songs from, for example a samsung using Bluetooth. If not, does anyone know a free app or something were i can download fre music. Ps exuse My english hope you'll understand��

Is it possible to send songs from, for example a samsung using Bluetooth. If not, does anyone know a free app or something were i can download free music.
Ps exuse My english hope you'll understand

The only way to get songs on an iPhone is by synching the songs from your iTunes library, or purchasing them from the iTunes store on your phone.
You can search yourself for sites that offer free music.

Where to send feature request for router?

Hi, does anyone know where to send feature requests for the router firmware? I want to suggest adding http://www.dnsomatic.com to the supported dynamic dns providers, as it would add tons of services with little work.

xirian wrote:
Hi, does anyone know where to send feature requests for the router firmware? I want to suggest adding http://www.dnsomatic.com to the supported dynamic dns providers, as it would add tons of services with little work.
Today Verizon made available a new area on the forums called the Verizon Idea Exchange:
http://forums.verizon.com/t5/Share-Your-Ideas-with-Verizon/idb-p/ideas
Based on the FAQ Verizon has posted it appears this would be a good place to enter your request.
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7.1, Build 09.97
Keller, TX 76248

To whom do I send a request for sending me my recovery Key?

To whom do I send a request for sendnig me my recovery Key?

Recovery key for what?
If FileVault, the following has information: OS X: About FileVault 2
If Apple two-step verification: http://support.apple.com/kb/ht5570

(Request for reporting available) is not coming in Cube

Hi All,
I have Cube & DSO.
I added fields in DSO & Cube.
Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
thanks in advance,
Kiran.

Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....

Request for reporting available icon is missing !

Hi,
I have an infocube which has been uploaded by ODS and the data load was successful.
But--
The request for reporting available Icon is missing in the request.
Prior to this dataload, yes there were falided requests which i had deleted before uplaoding it self.
Why i am not seeing the icon?
Raj

Hi Raj,
If you are using BI 7, then in the mange tab of the infocube check in the extream right ....
otherwise it should appear...
if you are talking abt ODS then you might have missed the step to activate data in ods.
hope this helps..
cheer's
HVR.

"Request for Reporting available " is not displayed after loading the data.

Hi
A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
Please advise on this.
Regards
loyee

Hi,
What is the status in Monitor. If it is ok, go to manage of the infocube,
in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
Click the first check box, (Set Quality status to OK). If you aggregates, choose second box.
Hope this helps.
Regards,
Rama Murthy.

Needs to know why firefox did not send a request for appcache manifest file declared in the html manifest="url" and how to fix it?

I created an HTML5 appcache app as follow:
<!DOCTYPE html>
<html manifest="url.manifest">
<head>
</head>
<body>
</body>
Upon onload() event, I made several AJAX calls (POST) to the servers to load the data for the first time and they all done via HTTPS. I've inspected the servers' access log and I did not see the request for url.manifest and the loading of the appcache fails with an error (no details provided).
Chrome is working fine with current setup and here is the content of my manifest:
CACHE MANIFEST
CACHE:
/images/flower.gif

This forum answers many webdev questions, but I think yours calls for a higher level of expertise. You may want to try the [http://forums.mozillazine.org/viewforum.php?f=25 mozillaZine Web Development board]. It is an unofficial forum with separate registration.

Simultaneous data activation in cube - request for reporting available

Hi,
I'm on BW 3.5.
I am loading several million records to a cube, processing is to PSA first and subsequently to data target.
I have broken the load up into 4 separate loads to prevent caches from filling up and causing huge performance issues.
When I load all the data in a single load, it takes 10 hours to load. When I break it up into 4 loads it takes 3 hours.
My problem is that during the loading from PSA to data target, the first data load becomes green and ready for reporting before the last one has finished loading, and so the users get inaccurate report results if they happen to run a report before the last request activates.
Is it possible to get all 4 requests to activate simultaneously?
I have tried adding an aggregate to the cube, no good.
I have tried loading the 4 loads to the PSA in sequential order in the process chain, and then loading from PSA to data target simultaneously (side by side), no good.
Does anyone have a solution?
Many thanks,
Paul White

Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....

Request for reporting available after rollup. Why not before?

Hi,
In infocubes with aggregates, a dataload is not available for reporting until you roll-up the aggregates. This is very unwanted behaviour and we'd like to have the loads available at all times, with or without a rolled up aggregate. All our aggregates are rolled up in the same process chain block after all loads are done. This means that data will not be available for reporting until all loads have finished, something our customers complain about.
Because parallel rollup jobs collide, rolling up up after every infopackage would make our loadschedule very unflexible (difficult to plan parallel processes).
Is this possible (by changing a setting somewhere) to change this and make load available for reporting at all times, or is this one of SAP's standard programming decisions without any workarounds?
Cheers,
Eduard

Aggregates data is maintained in aggregate tables.
Unless, you roll it up after every data load, the aggregate data wont be correct and it wont be consistent with the data in the cube.
YES< the roll up job will not be complete unless the loading job is compete.
One suggestion is to review the process chain jobs and see if you can reshuffle the jobs.
But aggregate roll up has to happen after data loading job of that cube on which aggregate is built .
Ravi Thothadri

Send T. code for report u0093Schedule Delivery Dateu0094 Vs u0093Actual Delivery Dateu0094.

In ECC 6.0 send t . code (Report for Delivery Monitoring based on Schedule Delivery Date Vs
Actual Delivery Date)

capaho,
Previous related Topics:
9/3/09 Duplicate Post Report Rejected
9/6/09 Is anyone else getting bounced email notifications for "Report this Post?".
9/8/09 Weird bounce message when I report a questionable or duplicate post
9/25/09 Does this indicate a problem on the forums
ali b

Transport request for Report

Dear Experts,
I have built a query/ report (in Development System) in Bex. I need to move that report to test system. How to do that? I haven't got any transport request for that. Do i need to create a transport request for that? Could you give me step by step what to do and how to do, please?
Thanks,
Riya

Riya,
Please don't ask the same question in different threads, esp as you have not closed out a lot of your previous threads:
urget please moving to testing system

Where can I send feature requests for Adobe AIR?

If you have a feature request, please submit your ideas to our Adobe AIR Ideas website.

Hi Jan!
Possibly other users of a MacBooks, would have some ideas for you.
I have requested that a Host, relocate this Topic to the Using Your MacBook Forum.
ali b

Is it possible to send a request for report pagination?

Similar Messages

Maybe you are looking for