Is it possible to send the TV channel feed by using live encoder??

Hi all,
I am planning to stream one of my favorite TV channel on my web.I got permissions too to stream on my page,but whats my doubt is..
1)How to send feed to my server from  TV channel  by using live encoder?
2)I think third party tool should be use for converting the TV signals into digital is it right??
Please give me proper inputs or procedure for streaming TV channel into webcasting
As iam very new to this concept plz excuse me if any thing sounds wrong.......
Thanks in Advance
Plz help me out..

Hi guys,
First of all sorry for very late reply,
Finally i am able to send the TV channel signals by using live encoder. It works good with small problems .
problems:
1) In player after connect to server the screen( channel screen) is not exactly showing that means bottom 1/4 portion is cut off. Is there any setting to avoid this problem??
2) After connect to server, on client machine the video is not running smoothly,it breaks upto 2 sec then skip that portion and then continue...it is continuing like this for every 5min
3) On FMLE the input and output panel showing with high color quality but once it send to server(even local server also) on web casting  it delivers very poor quality
is there any setting to solve this problem?
4)Last question (but not final one) i played  all these games on my local machine (with static IP) for testing purpose, i planning to take dedicated server in order to webcast my client channel for public. Please give me some suggestions which one i can prefer in the sense bandwidth,speed,RAM..etc so that i can make my client satisfy by avoiding all problems mentioned above..
Waiting for your reply
Thanks in advance

Similar Messages

  • Possible to send the 50,000 records at a time using proxy?

    Hi All,
    I am using the proxy to send the data form SAP to PI and then send it to Receciver by using JMS. Here i have a small issue.... is it possible to send the 50,000 records at a time using proxy? If not please suggest me how can i send bulk of records through proxy?
    Thanks
    Karthik.

    is it possible to send the 50,000 records at a time using proxy? If not please suggest me how
    can i send bulk of records through proxy?
    you can try this in steps...do not go for a BigBang testing :)....check how much your XI system can handle at a time...then you may need to tune the system parameters to accomodate more message size.....how to do this??...check the below document..section 3.9.2 (Special Cases)
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2016a0b1-1780-2b10-97bd-be3ac62214c7
    Regards,
    Abhishek.

  • I forgot verification Asked Questions Is it possible to send the answers to my e-mail

    I forgot verification Asked Questions
    Is it possible to send the answers to my e-mail

    khalid
    This is not Apple. This is a user forum. We are users just like you.
    You will need to contact iTunes Support, http://apple.com/emea/support/itunes/contact.html (select Account Security as your help topic)
    Even after you reset your security questions, it is highly recommended you add a rescue email address. To do so, log in at appleid.apple.com and click on Password and Security. Answer the questions and then click on "Add Rescue Email Address:"

  • Is it possible to send the Pdf format of WebI linking report through email?

    Hi All,
    I have created linking between 2 WebI reports through OpenDocument. I can schedule the parent report and send it to User Email as PDF format, But when the user click the link in parent report its not opening the PDF format of child report after passing the parameter from Parent report. It throws following error.
    Is it possible to send the linked reports(without breaking the functionality of passing the parameter to Child report) to user who don't have access to BO environment? Please help me out.
    User needs to get the Parent PDF report in email, once they click the link it should pass the parameter to child report and the corresponding child report should open in PDF format. (In Infoview "View Mode" i can able to achieve this, how about in Email?).
    Thanks and Regards,
    Tharini Prabhu

    So to achieve my requirement, according to my understanding I have to do the following steps.
    Please correct me if I am wrong.
    1.     Without BO credentials the user can’t able to access the Link and child report created using OpenDoc.
    2. To overcome this I have to create one reserved userid through Admin and assign to all set of Users who will use the Reports.
    3. Have to use Single Sign on function through SDK to avoid the popping window for entering credentials right ?
    I can’t able to find the Sap Note 1326701 in http://www.sapossnotes.com/
    Could you please provide me the details how to implement that?

  • Is it possible to send the MediaElement's video content to Directx pipeline?

    Hi,
    Is it possible to send the MediaElement's video content to Directx pipeline then render that video content into Directx back Buffer?
    I don't want to use MediaEngine or Windows media foundation because there's more work for me to do by using MediaEngine.
    I would like to use C#, XAML, Directx and MediaElement.
    Regards,
    Weera

    Hello,
    The VideoBrush is only supported in Silverlight apps. It is not supported for Runtime apps.
    AFAIK it is not possible to pass the MediaElement to the SurfaceImageSource (although we made changes to the underlying architecture so both the ME and XAML are using DirectComposite to render the UI elements, so this may be theoretically possible but is
    not exposed or documented to my knowledge).
    Again the Media Engine is the recommended technology for direct interop with video and D3D. Please take a look a this sample for more information on using the Media Engine with D3D:
    Media engine native C++ video playback sample
    I hope this helps,
    James
    Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with an app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on th

    Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with your app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on the iphone?
    Thankyou.

    Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with your app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on the iphone?
    Thankyou.

  • Is it possible to hide the save function and only use the save as function in teststand

    Hi,
    When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
    Is it somehow possible to "hide" the save button and only use the save as function?
    Or is there another possiblity to solve my problem.
    The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
    What would even be great if there could be a log of what the changes were
    Thx!!! 

    1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
    2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
    Hope this helps,
    -Doug

  • Is it possible to sort the Aperture Library by Lens used

    Is it possible to sort the Aperture Library by Lens used? And get statistics on the different Lenses used?
    I'm using latest Aperture.

    I would just add that your Preferences settings have to be set to show the columns you need. Go to Aperture -> Preferences, and select the Metadata tab. in the "List View Columns" field, for whichever set you have chosen with the radio button, choose the set of data from the pulldown list that shows the fields you want. For example, I have the lens model field set in EXIF-Expanded set. I choose that set and those fields will show in the columns in List View.
    Great tips, thanks!

  • Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure?

    Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure 1.2?

    SF300 series is targeted for support in  PI 2.0.

  • Is it possible to send the parameter from one appli. to other applic

    Hi
    I want to send the parameter from one application say applcation1 to application2.Both applications are running on same server.
    Can you suggest any solution provided by sun

    Few of solutions are like
    writing the parameter to xml file or inserting the parameter in database which are common resources to both.I want some other way to solve the same.

  • HT1222 My Ipod needs an update but I don't have internet service on my computer so is it possible to send the update to the email  to update the ipod system through the Ipod with wi-fi?

    my ipod needs an update but i don't have internet service on my computer i was wondering is it posible to send the update to the email to update the ipod system through Wi-Fi?

    If your iPod touch is already running iOS 5 then you should be able to upgrade to iOS 5.0.1 on the device with a Wi-Fi connection.
    tt2

  • How to send the payload to a jsp using receiver Http adapter?

    Hi experts,
    I have this scenario from Legacy to XI to external app server.I have a test jsp to execute that functionality .Its a jsp which has 1 textarea named "test" and when I click on the submit buton I get a response back.This way I am able to test this independently.Now from XI when I am executing my scenario I am getting status code '1250' and message as ' http request(test) is null'.Now in the scenario in http adapter I just provide the target host : ip of server ,
    service number : port no ,
    path: the container or the request handler. But this scenario fails and gives me the above erroneous response.Now Basically I am not able to get how to send the value to the textarea "test"? please provide help as soon as possible.Do we have to put the name of the jsp in the "path" in http adapter and use prolog as test=.I tried this but it doesnt work.
    Is there any way to check the URL that it forms after appending the querystring in the url ...?
    So please provide help on this or suggest a solution to [email protected] as soon as possible.....
    Thanx in advance.
    Akshata

    hey Shekhar,
    thanx for that prompt reply but I have configured the communication channel in the same manner as suggested by u.
    actually I have this jsp page http://xx.xx.xx.xx:8080/abcdef/try/efg.jsp where there is a textarea "test" which has to be filled and there is a submit button.When I test this http client i.e the above jsp page independently then it goes to handler
    http://xx.xx.xx.xx:8080/abcdef/trial/    And it gives a proper response message after clicking on the submit button.
    now I want to carry out the same using receiver http adapter. I need to pass the value for this inputfield names "test" on that jsp . so right now I have configyured the adapter as
    addressing type: url
    target host : xx.xx.xx.xx
    service no:8080
    path : here I have given the path of handler i.e /abcdef/trial I tried giving the jsp page also but logically I guess it should be the handler.
    content type: text/xml; charset=iso-8859-1
    xml code: UTF-8
    Mask special characters (URL escaping) checked.
    now since the name of the inputfield is "test" in the prolog I gave test=
    But it doesnt work I get this error "http request parameter [test] is null" in the response message  which I guess suggests that it is not able to send the value for the field"test" to that handler.Please suggest how to send this and tell me if there are any other configurations that I have to do in the receiver communication channel.
    Thanx ,
    Akshata

  • Is it possible to get the balance sheet report by using profit center

    Dear Experts,
    could you please help me out regarding the following issue.
    business area wise we can get the balance sheet but i want to know is there any possibility to get the BS by using profit centers only for BS Items or can we assign biasness area as well as profit center in a single screen.

    I think you can use this report. S_ALR_87013336
    Regards
    Radha

  • Is it possible to browse the Time Capsule drive without using Bonjour?

    I have not found any real specs for the TC that it can use samba. I don't want to have to depend on bonjour to use the NAS functionality of time capsule. Is it possible in Windows explorer to just type:
    \\192.168.x.y\
    and get a list of the drives in TC? I'd ultimately like to be able to access music and video using other devices (such as XBMC). I can already access a NAS using samba... but the TC instructions are so dumbed down that I can't tell if you can even access the beast without special software. I'm hoping it is possible. If someone has TC and a PC or even boot camp, can they check this and post back?
    Thanks!

    Bonjour is only necessary if you wish to use the print server functions of the Time Capsule.
    I have XP and Vista systems connecting to it through a normal mapped drive configuration without Bonjour and it works fine.
    Just stick with the IP address as the name of the device (ie. \\192.168.x.y) unless you have a WINS server and configure the TC with the WINS server address.

Maybe you are looking for

  • Offset operation in select statements where clause

    dear experts,     if i use offset operation in select query , syntactically giving     me a warning message.     how to avoid warning message     without using another internal table populated with  only  jtab+0(10).      ex:           select field1

  • Command line parameters...

    I want to run my report from a Java application... Does anyone know how, or if it's possible to have a the report go both to a .PDF file and to the screen so the user can see the reoport they just generated, and also can I pass in the destination fil

  • Burning cd's on a PC from in iTunes from Home Sharing

    I have home sharing turned on so that my partner's PC can access my home music library (on a iMac 20"). I'd like to burn CD's from my partner's computer. How do I do that?

  • Converting csv from a txt file

    Hi, There is a txt file, I have updated which I need to convert to a csv file. The txt file looks something like this. Count,Test                                                           Number     46,003201                                          

  • Getting access to files

    I am using RAD 7.0 as IE I want to access all the files under a directory of my project using Java BUt my project cud be deployed at any location or path so How do I get the relative path using Java? My files are under this path C:\SDP70\workspace_au