Is it possible to separate call forward unregistered & busy on a device profile?

I've got the following situation cropping up a surprising amount at our site:
User has 2 jobs within our institution. Works 3 days a week on job 1, 2 days on job 2. Each job is billed to a different cost centre, and the user doesn't want to be getting calls for job 1 when they're supposed to be working on job 2, and vice versa.
As such, we've created them 2 device profiles. When they log into the phone at the desk of whichever job they're currently working, they get prompted for which profile they want to log in to. The other device profile (if still logged in to the phone on the desk of the other job) is then forcibly logged out.
When profile 1, for job 1, is logged in, but the user is already on a call, they want incoming calls to that extension to be directed to their voicemail (i.e. set Call Forward Busy [Internal|External] to send to voicemail). They can then check voicemail and follow up on the call as soon as they're off the current one.
When profile 1/job 1 is logged *out*, i.e. they're currently working job 2, they want incoming calls to job 1's extension to be immediately diverted to a colleage within the same job 1 team.
I thought I could do this by utilising Call Forward Unregistered [Internal|External], but this does not seem to be the case. When a device profile is not logged in to a device it seems like the busy trigger just gets treated as 0 so the value of Call Forward Busy is followed. I can't see any situation where Call Forward Unregistered is ever utilised if an extension is only associated with a device profile.
Is there any way to do what I want (without massively convoluted configuration on Call Manager)? If not, do people think this is worth raising as a feature request (or bug in expected behaviour) for later versions of Call Manager?
We're currently on CUCM 8.5, FYI, in case this is something that's already been updated in version 9 or later.

Some progress on second idea. Saved a copy of universal access plist with cursor set to large then set the cursor to small again. Replacing the plist file had no effect until I went into the UA pane and changed a setting at which point it must rewrite the file and refresh because the cursor size also changed at this point.
Tried the same again and restarted Finder, no effect. Also tried altering another pref pane instead with no effect. Need a way to force the computer to look at the plist files, no idea how though. :-)

Similar Messages

  • Call Forwarding, LED settings, e-mail invites, profiles, e-mail settings (who wins on conflict)

    Hi, it is unbelievable how many things you guys from RIM got wrong in the past few years. no wonder you are going down. I am a BB long time fan and recently switched from the best BB ever (9900) with the worst battery life to the Q10. You have massive issues with this one:
    - Can not forward to contact from phone book?! Are you kidding me? A feature, available from the dawn of mobile phones.
    - can't change the LED red blink duration. The default is too short. I have to watch my phone all the time over the weekend. Why??? Fix it!!!
    - One of the accounts I use is Yahoo. The stupid Q10 can not send invites via Yahoo account!!! Why? Fix it! The 9900 could.
    - e-mail account settings - that's the big one. You got me really **bleep** here. Vodafone, UK disabled my SIM for few hours as I was testing something. The stupid Q10 erased 30 days of e-mails from my both accounts just like that. Why???? How could you do this to people? I guess you can't recover anything. Where is the setting that determines who wins b/n the device and the mailbox???? How can you launch a device without this setting.
    - The way notification profiles are managed on the Q10 is like from the dawn of Symbian. Really basic and stupid. Why can't I manage the profiles like on 9900 or the older ones even?
    - I will not even touch the way this Q10 copies text with the touch screen. I will start using bad language and it is not nice.
    - One last thing: If you make BBM users from nonBlackberry OS to pay extra for this app, you will sign off the death sentence of your poor company. I warned you
    Lett me know if I can recover any of my mails. You must have a copy in Slough, UK.
    Regards,

    It takes a while for a new OS to mature, just take a look at the first iPhone (no cut & paste among other missing features), the first android (no attachment in messages among other missing features) and perhaps you can look at it from a different perspective.
    Version 10.2 fixes a few of the problems you have mentiodn and there are apps on the market for some of the others.
    I myself think that BB10 is quite an achievement and if allowed to mature will be seen as the OS to copy not derise.
    If you've been helped click on , if you've been saved buy the app.
    Developer of stokLocker, Sympatico and Super Sentences.

  • Activate a call forward with a Third-party SIP Device or with a analog device

    Hi,
    In a CUCMv9, how i can activate a call forward (all, busy, no anwser...) with Third-party SIP Device or with a analog device connected to a fxs?
    I want to activate a call forward like a Alcatel or Aastra PBX with a code.
    For exemple, i pick up the phone, with the code *95 followed by the destination number and hangs up the phone. And use the #95 for désactivate this call forward.
    It's possible?
    Thanks.

    No codes for 3rd party SIP phones, no way to do it. Or for that matter, not even for Cisco Phones, other than CFA.
    Anything besides CFA needs to be done via CCMadmin or CCMuser for any kind of phone.
    For FXS that's only doable if you're running SCCP
    http://www.cisco.com/en/US/partner/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Set Call Forwarding over Internet?

    Left my iPhone at home... wonder if it is possible to set call forwarding over the net?
    Thanks

    Thanks. Tried calling AT&T but they always ask me for my mobile no. then immediately connect me to Apple support who doesn't know the answer. Kind of stuck. Will try a couple more times. Thanks again.
    Message was edited by: bso

  • Common Area Phone and Call Forwarding

    Hi,
    Is it basicly possible to use Call Forwarding on Common Area Phones without Hot Desking?
    According toTechnet yes.
    http://technet.microsoft.com/en-us/library/gg412807.aspx
    We have a problem with the setup of Common Area Phones.
    All CAP phones have a Voice Policy with Call Forwarding enabled and Firmware 4.0.7577.250. (Hard Reset done)
    But the phone menu does not show the Call Forwarding entry.
    When we log in as a user (Hot Desking) with the same Voice Policy, Call Forwarding is shown and functional.   
    Any ideas?
    Thank you in advanced for any input.
    Cheers.
    Dietmar
    ucready

    Try these (on Lync 2013 SEFAUtil):
    Forward calls to outbound:
    C:\>SEFAUtil.exe /server:theGreatPool.internal.net sip:[email protected] /Verbose /callanswerwaittime:10 /setfwddestination:+3580123456789  /enablefwdnoanswer
    Forward calls to internal user:
    C:\>SEFAUtil.exe /server:theGreatPool.internal.net sip:[email protected] /Verbose /callanswerwaittime:10 /setfwddestination:sip:[email protected]  /enablefwdnoanswer
    Petri

  • Call forwarding of 2 Online Numbers

    I bought 2 Online numbers.  I have already set up call forwarding for 1 number to my cell (cell #1) and would like to do the same for the other number to my other cell.  But it seems that I can only forward to one number (cell #1), how can I forward the second Online number to cell#2?
    Thanks

    CarlosD wrote:
    I have two online numbers in my account.  I would like the calls on one be forwarded to one cell phone and the other to a different cell phone.  Is this possible?  It does not seems to?  Do I have to open a separate account for this?
    Currently, this would require a 3rd party application using the Skype public API or SkypeKit. This function is currently not supported by the Skype clients.
    You might want to do a search on:
    Skype call transfer
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • Unity 4.0 - Call Forwarding and Voice Mail

    Here is the situation:
    We have a DN (5301) that is not associated with a Unity mailbox but is on a 7970 phone. This extension is an "on call" number that is always forwarded to a technicans phone (local 4 digit ext or cell phone).
    When a person calls 5301 I want the voicemail of the final destination to answer.
    For instance if I had 5301 forwarded to 2000 - I would want 2000's voicemail to answer.
    Is there a way to set this up?
    Thanks in advance.
    Jeff

    Hi Jeff,
    Sadly this cannot be changed until Unity 5.x (the ability to choose "Last Redirecting Number" in not available in any other Unity version);
    Here are the Unity 5.0 release notes;
    Route Forwarded Calls by the First or Last Redirecting Number
    Cisco Unity supports the option of routing calls based on either the first or last redirecting number when a call is forwarded to Cisco Unity.
    Note the following:
    This option requires Cisco Unity-CM TSP 8.1(2) or later.
    This option is not supported by integrations through PIMG units.
    This option can be changed through the Advanced Settings Tool (AST), which is available in Tools Depot.
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/release/notes/501curelnotes.html#wp507371
    Call Information Exchanged by the Phone System and Cisco Unity
    The phone system and Cisco Unity exchange call information to manage calls and to make the integration features possible. With each call, the following call information is typically passed between the phone system and Cisco Unity:
    •The extension of the called party.
    •The extension of the calling party (for internal calls) or the phone number of the calling party (if it is an external call and the phone system supports caller ID).
    •The reason for the forward (the extension is busy, does not answer, or is set to forward all calls). There is also a reason code for Direct Calls.
    Cisco Unified Communications Manager SCCP and SIP trunk integrations can also provide the following call information (the choice of first and last redirecting number is set in the Advanced Settings Tool, which is available in Tools Depot):
    •Called number
    •First redirecting number
    •Last redirecting number
    Note Cisco Unity can use either the first redirecting number or last redirecting number, depending on the setting in the Advanced Settings Tool, which is available in Tools Depot.
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/design/guide/5xcudg060.html#wp1040786
    If this was just a one-up type of setup you can configure a Voicemail profile (in CCM) for 2000 and apply it to 5301 that will allow this type of Call Forward to 2000's mailbox. The fact that you need this for Multiple Tech's will not work. Is there any way the Techs could use a Shared Line? Then these solutions could be adapoted.
    Or in Unity set up Alternate Extensions so that User A is an Alternate Extension for User B etc. Sharing a Cisco Unity Voice Mail Box between Two or More IP Phones
    Configure Alternate Extensions
    Open the Unity System Administrator web page.
    Navigate to the subscriber's profile. Select Subscribers > Find and Select a Subscriber > Enter Subscriber Information then click Find and click the Subscriber's name for the subscriber that owns the primary phone (2000).
    When the subscriber page comes up, select the Alternate Extensions option and click Add.
    Enter the alternate extension number (in this case 5301) and click the Save icon.
    From this good Unity doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_configuration_example09186a008015ceec.shtml#steps
    Hope this helps!
    Rob

  • Call forward to external number which has auto attendant

    Hi 
    I am a voice administrator in my company
    I want to forward all of my calls to my Other location's number.
    Other location has only POTS line and to reach my extension user needs to go through Auto attendant menu.
    Is it possible to enter a digit pattern in call forward destination in CUCM so that it can take care of Auto attendant menu of my Other location and land on my number?
    We have CUCM 8 running.
    Please help!!
    Ashwin

    Hello Ashwin,
    "Other location has only POTS line and to reach my extension user needs to go through Auto attendant menu."
    What type of phone system and voice mail is providing the auto attendant?
    How are the POTS lines(analog only correct?) terminated into the phone system?

  • Issue in Call Forward to Voicemail

    Hi,
    I am facing an issue in my cisco telephony while making one phone forward to another phone. Below is the Scenario.
    I have 2 phones, A & B , i have forwarded all calls of Phone A to Phone B. So when i call Phone A its gets forwarded and rings on Phone B. And on Phone B forward all Busy internal or external, Forward no answer internal or external to voicemail is checked.
    Now the issue is when call on Phone A gets forwarded to Phone B and iff guy on phone B doesnt answer the call, it doesnt go to Phone B voicemail,
    Iff the Caller number is Displayed on Phone B it goes to Phone B voicemail.
    If DID of phone A is displayed on Phone B it goes to voicemail with a message welcome to Cisco Unity messaging system, without a greeting.
    If Local Extension of Phone A is displayed on Phone B, call goes to Phone A voicemail.
    I am not able to understand what is happening here.
    Please give me some solution. Your help will be highly appreciated.
    Regards
    Saurabh Kumar

    Hello Saurabh,
    This is due to:
    •Called number
    •First redirecting number
    •Last redirecting number
    Just to add additional input to Chris suggestion, if you do the change of "Use Last (Rather than First) Redirecting Number for Routing Incoming Call" , make sure you understand the full impact in your dial plan deployment, to avoid other possible call routing issues.
    DAV_i-D

  • Call Forward to Voicemail

    I am having an issue when forwarding to another extension.  I know this is probably a simple answer but I'm stumped.
    I am going into the DN Configuration page for extension A.  Under Call Forward, for the destination I am entering extension B for:
    Forward Busy Internal
    Forward Busy External
    Forward No Answer Internal
    Forward No Answer External
    Forward No Coverage Internal
    Forward No Coverage External
    Forward on CTI Failure
    Forward Unregistered Internal
    Forward Unregistered External
    And I am unchecking the Voicemail check boxes.
    Then I am doing the same for extension B.
    But when I have it setup this way, each extension will bounce to the other and will not go to voicemail.  It will forward back and forth.
    Any suggestions?

    Hi,
    If at least one of these phones is set to CF to VM then it will, if not, then no.
    If none of your phones is set to CF to VM CUCM will not send them to VM, that is expected, if you need to ring, phone A, and if it is not answered to go to phone B, C... and so on, and send the caller to VM after you have reached all of these then use a hunt group, (the pilot can be set to CF to VM if nobody answers), if you need to ring all phones at the same time so someone can pick this up, use a hunt group with a broadcast logic.
    If this is for a single user, check 'single number reach' (SNR) or mobility on CUCM.
    Bottom line, there is no way to send a caller to VM if none of the phones is set to CF to VM.
    HTH
    Chris.

  • Support Line - Call Forward All through Hunt Pilot to cell phone

    I know I may be beating a dead horse, but I've found so much help in these forums that I figured I'd give it a shot.
    We have a Cisco Unified Communications Manager Business Edition and we are running into a configuration issue. What we would like to do is to create an emergency support line for our IT staff. The way we would like this to function is that a caller dials a number, CM accepts the call and dials out to our IT staff's cell phone numbers in a round-robin fashion. To avoid the caller getting dumped into the IT staff's voice mail on their cells, we would like the staff member to have to dial a number to accept the call. If there is no answer, the call rolls to the next cell number. If no one is available, the caller should be directed to Unity Connection to leave a message. Unity then will send out text and email messages to the support staff.
    I know that we can use Unity to perform an assisted transfer, which will require the user to press "1" to accept the call, and we are able to get Unity to send out the notifications (text and email) when a voice message is left. The issue is with Call Manager making the outbound calls to the cell phones.
    What we have attempted is to setup DNs that call forward all to the users cell numbers. These DNs have been added to a Line Group, which has a Hunt Pilot attached to it. Any time this pilot is called, we get a reorder. Using the DNA, we see that "no device is associated with the DN", which is under the DN for the first users cell forward. If we add that DN as a second line to that users IP Phone (7940), then the call into the Hunt Pilot rings that line on the IP phone, not the CFA to the cell phone.
    After weeks of digging around, it seems as though CFA in a Hunt is just not possible. My boss wants official word from Cisco about this, but TAC doesn't seem to want to help due to service contract issues (which blows my mind, as we have opened several cases in the past two months for configuration related issues). Our Business Edition came with Contact Center Xpress, although we do not have the resources available to install it. If CCX will carry out this task, that might be enough to push management into getting another server to support this, but without being able to play around with it, I don't know.
    If anyone has any suggestions on how to make this work, I would GREATLY appreciate the help!
    Thanks in advance,
    -Geoff

    Hi Geoff,
    Always interesting isn't it :)
    Call Forward settings on individual Hunt member phones are ignored when presented a call via the Hunt feature. Here is a clip;
    The concept of hunting differs from that of call forwarding. Hunting allows Cisco CallManager to extend a call to one or more lists of numbers, where each such list can specify a hunting order that is chosen from a fixed set of algorithms. When a call extends to a hunt party from these lists and the party fails to answer or is busy, hunting resumes with the next hunt party. (The next hunt party varies depending on the current hunt algorithm.) Hunting thus ignores the Call Forward No Answer (CFNA) or Call Forward Busy (CFB) settings for the attempted party. This also applies to CFWD ALL settings.
    From this doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edabe.html#wp107892
    So, any Forwarding settings have to be done on the Hunt Pilot itself. These Destination settings (on the Hunt Pilot) need to be configured to go to the Unity Voicemail Pilot # or perhaps this is where you Forward out to the Cell #;
    Hunt Forward Settings
    Forward Hunt No Answer - When the call that is distributed through the hunt list is not answered in a specific time, this field specifies how to forward the call.
    Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)
    Forward Hunt Busy - When the call that is distributed through the hunt list is busy in a specific time, this field specifies how to forward the call.
    Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)
    Maximum Hunt Timer - Enter a value (in seconds) that specifies the maximum time for hunting.(Used in conjunction with Forward Hunt Busy)
    Maybe you could leverage these Unity Connection configs to achieve your desired results. These will ensure that the Message is not left unattended;
    Cascading Message Notification
    Cascading message notification allows you to send notifications to a widening circle of recipients. Cisco Unity Connection continues to send notifications according to the devices you selected until the message has been saved or deleted by a recipient.
    For example, to create a cascade of message notifications for your Technical Support department,
    Chaining Message Notification
    Message notification can be set to "chain" to a series of notification devices if an attempt to send notification to the first selected device fails. The definition of failure to a notification device is based on the options you select for retrying a device that is not answered or is busy.
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/user_mac/guide/2xcucmac040.html#wp1132107
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/user_mac_cmbe/guide/6xcucmbemac040.html#wp1132107
    Hope this helps!
    Rob

  • CCME Call Forward from one Hunt Group to another Hunt Group Failure

    Hi I have a couple of hungroups in Cisco Call Manager Express. I am trying to configure a Call Forward no answer from one hunt group to another. Does anybody know if this is possible? If so, is there a config available? Here is my config, but it is not working.
    Thanks,
    Derek
    voice hunt-group 20 parallel
    final 2290
    list 2201,2251,2252
    timeout 30
    pilot 2209

    Hi Derek,
    This is supported with the restriction shown below;
    final number
    Router(config-voice-hunt-group)# final 8888
    Defines the last extension in a voice hunt group.
    If a final number in one hunt group is configured as a pilot number of another hunt group, the pilot number of the first hunt group cannot be configured as a final number in any other hunt group.
    From;
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmecover.html#72373
    Cheers!
    Rob 

  • Stopping call forwarding on one of two numbers?

    HI,
    I have two Sype numbers, the main one for the UK and a new one that I bought a couple of months ago, a Hong Komg number.
    The HK number used to be used by a tourism website, and although they have changed their main number on their website, references to the old number still exist in a few places and I get calls, sometimes several a day to the number.
    I have contacted the company in HK twice and asked them to clear up the problem, but I suspect that the calls come from external websites that they don't control and are unable to remove the numbers.
    So, I would like to stop call forwarding on one of my numbers, but it doesn't seem like this is possible, which is obviously ridiculous but hey ho.
    I am therefore trying to cancel the HK number, but when I go to the cancel page and hit cancel the page just reloads without doing anything. I also believe that the number stays valid until the yearly payment runs out.
    Questions then, can I cancel the number and peoperly kill it, so I stop getting these calls?
    Many thanks,
    Tom.

    Hello and welcome to the Skype Community.
    Checking your options. Canceling the HK Number wouldn't be effective until it expires on February 16th 2016, Which error message [if any] do you receive when you try to cancel call forwarding to the HK Number?
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    There are a lot of posts in the forums today with people having problems with iMessage.   There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
    I would just wait it out - I'm sure it will be sorted out soon.

  • Unable to disable Call Forwarding function on my iphone 4

    Hi,
    I enabled call forwarding to a certain number. Now I am unable to remove the call forwarding.
    - Tried to "off" card forwarding on iphone setting
    - Restart iphone
    - Reset all settings
    - Called telco to erase my call forwarding details
    - Dial ##21#
    All to no avail.
    Anybody faces the same problem? Is it telco issue or iphone issue.
    Help please?

    This is a telco problem.
    The interface on the iPhone for call forwarding is only an interface to access the telco's system and set up call forwarding.  It has no control over the actual call forwarding settings.
    It might be a good idea to reset network settings on the iPhone in Settings > General > Reset.
    You can also eliminate the possibility of it being a setting on your phone by restoring as "new", but that's a bit extreme.

Maybe you are looking for

  • "Eval Parsed Formula Node VI" does not return outputs in predefined order

    I make a data analysis program, where the data consists of some million events and each event has e.g. 4 channels and 1-5 hits on each channel.  I would like the user to select different expressions of these channels to give coordinates to plot in a

  • Post goods issue

    hi if a order is created for a material 'X' for quantity=50.while delivering the order in VL01N if the delivering and picking qty is given 40 and a post goods issue is done after that in VL02N if we change the delivering and picking qty to 50 and do

  • Details for V.21

    Hi,   In the T.code V.21 (log of collective run), what is the relevance of the field "Type of collective run" and what happens if I give "F" in that field? Is there any provision to invoice "only for deliveries during a particular period" in the t.co

  • Adding BW 3.50 in logical system problems!!

    Hi All I am trying to create a landscape for our BW systems and I cannot add our BW.3.5 systems as on each of the elements I get the message 'No system found for this product/main instance' I have also looked and can only find BW 3.1. In SMSY i can s

  • Hello ! I'm using iphone 5 running ios 7.1.1 I have problem with Appstore error and also Safari don't work too. What can I do to fix this problem ?

    Hello ! I'm using iphone 5 running ios 7.1.1 and I have problem with appstore error and also Safari doesn't work. what can do I fix this problem ? I need help now my iphone can't do nothing