Is it possible to set a bookmar for BT Email (@bti...

Hi
All my searches for info on this seem to always end up with info on the older BT Yahoo email rather than the @btinternet email. I would rather have a bookmark straight through to BT Email rather than having to log in to MyBT and then access the BT Email link there.
Is that possible?
Regards from Livingston, Scotland
Solved!
Go to Solution.

Hi licquorice
Thanks for that, it answers my question.
Regards from Livingston, Scotland

Similar Messages

Setting Importance Level for a email message using javax.mail.* API

Setting Importance Level for a email message using javax.mail.* API
From what I understand we can set Flag on Email Message. How can we set Importance Leve: High/Low for an email message?
Thanks
Purvi

Most of the message Flags work only for IMAP mailboxes. POP3 supports only the DELETED flag. It must be understood that Javamail is a framework which provides all the features available in a standard mailing system. But whether or not a particular feature works is a functionality of the particular implementation being used.
Thus for example POP3 cannot differentiate read from unread messages in a mailbox though Javamail provides that feature.

It should be possible to set default behavior for all file types

It should be possible to set a default action for all file types. I'm so tired of having to manually sit and say "save this file" because Firefail always defaults to "open with" and has disabled the "Do this automatically for files like this from now on."
And spare me the zealotry religious excuses for why its the fault of websites and not Firefail
''edited to remove swearing''

I do want users to have full control to be able to set any folder view they want by using Apply to Folders; I just want to set the initial/default view to Detail because that matches what the majority of my users want.
That is, what registry setting changes when I go to a picture folder, change the view to Detail, and click Apply to Folders? Having done that, I still retain the ability to change it to some other view and apply that to folders. But what registry setting
represents the change I just made when applying Detail view to all Picture folders.?
This settings is simple via GUI, but it is related a lot of registry keys, I made a test in my machine, capture the "Apply to Folders" process using Regshot tool (this is a small tool which can compare the regsitry changes after you change some
settings), and this is the result:
this is part of the registry changes, a plenty of registry keys and values need to be changed. hard to list them here. if you have interests, I recommend the tool Regshot, it can help you capture the regsitry changes.
NOTE: Please Note: The third-party product discussed here is manufactured by a company that is
independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's
performance or reliability.
Yolanda Zhu
TechNet Community Support

How Can I set up Thunderbird for multiple email addresses

I am using Eudora 7 to handle 6 email accounts on a Windows XP SP3 machine. I want to install Thunderbird on the same machine and import the email addresses. I have Eudora setup to store the data files for each email address in a different data directory. This allows me to have a different icon on the desktop for each email account. Clicking on an icon starts Eudora with the email address data stored in a specific directory.
What I don't know is how to have Thunderbird import the different email addresses from Eudora to Thunderbird and how to keep the individual email address data separate in Thunderbird.
Any help would be appreciated.

I never used Eudora, so I can't tell much about it. In any case, I believe it's dead.
Wrt multiple accounts in Thunderbird, there isn't much you can do wrong. Simply run the new account wizard and set-up the accounts you want (one at a time).
https://support.mozilla.org/en-US/kb/automatic-account-configuration
If any of your accounts are POP ones, make sure not to enable Global Inbox to keep them separate.
http://kb.mozillazine.org/Global_Inbox

Setting Display Name for sent emails

Hi All,
I want to set a display name for sent emails. For example: when I send emails using [email protected] and after receivign this amil in my inbox it says from [email protected] Is there any way that I can show display name for this like Kartik <[email protected]>.
is there any API by which I can set this display name? Or this has to be done on mail server?
Any help would be appreciated!!
Thanks, Kartik

it asks for a attribute messageFrom and passes it to SMTPTransport. I have tried setting different values for messageFrom like
messageFrom=Test Email
messageFrom="Test Email"
but it didn't work for me. it expects a domain name there (even if its dummy) like
messageFrom=[email protected]
Can you tell me at which place InternetAddress is been called by SMTPTransport so that I can write my own impl for it.

Setting default account for sending email

I have 4 accounts I use for sending email, but would like to have one be the default and can't figure how to do that. there is a check box next to the outgoing server dropdown that says use only this account. I don't think that is what I want, nor am i clear what that would do.
Is there a way to set a preferred outgoing account?
Does that require a plug in or helper app of some sort.
thanks for any suggestions.

In Mail>Preferences>Composing:
Use Send new messages from: to select an account.

How to set audio notification for your email?

How to you set an audio notification for your email? Thank you any genious outthere for me

Deighan wrote:
ok maybe I did figured it out, if you have your wifi on and have other devices in the house, the strongest device does the notification,
No, this is not the case at all. Every device that receives email will notify you in whatever what it's set to.

Is it possible to set the precision for the subtraction operator?

Hi everyone.
I have two complex double precision numbers that are suppose to be equals. Each one is the result of different sets of equations.
When I subtract one from the other the result is not zero.
I think this can be explain by the fact that they are quite large numbers (about 1E+101), causing the subtraction operator to drop (or round, or do something not legit with) the two numbers. Moreover, if I repeat the subtraction with different large numbers, I obtain about half of the time the expected result (zero) and the rest of the time I obtain a value between 1E+84 and 1E+86.
What I would like is to get the result right everytime, so I thought about setting a precision to the subtraction operator. Is that possible? If it is, how am I suppose to do that and if not, what's wrong with the subtraction operator?
Thanks
tonh

Thought 1: 1e+101 is pretty big! Do you *need* all your calcs to carry such a big exponent? For example, can you run all the calcs on values that have been scaled by 1e-100, then at the end of all the calcs scale back by 1e+100?
Thought 2: If you just need to compare for approximate equality, you could divide the difference by the larger of the two values being subtracted. If you subtract two virtually equal 1e+101 values, you may get a difference in the order of 1e+85. The division will give you a ratio of ~1e-16. Ratios in that realm will mean that the two original values are about as nearly equal as the floating point representation can express. This type of method scales pretty well to work with both very small and very large floating point numbers.
Thought 3: If the inputs to your calcs are in the order of 1e+85 or less, you may really have your work cut out for you. You'll need to think carefully about floating point representation error at each step of the calculations to know where you can round, truncate, approximate, etc. There may be places where rounding will be *necessary* and other places where it is *disastrous*.
To summarize: you need to apply some of your error knowledge to your code. The 1e+101 calculated values probably don't have more than 6-8 *significant* digits of accuracy, right? (Most numbers come from some kind of measurement, or a rounded-off value for a scientific constant, etc.) You'll need to analyze your values and calcs to understand about how many digits of the 1e+101 numbers are truly *significant*. Then your code will need to treat values which differ by less than that amount as if they are truly equal.
-Kevin P.

Is it possible to set the NLS_DATE_FORMAT for my sessions at apex.oracle.co

Hi,
Is this possible?
I'm in the UK and getting the invalid month error when storing dates.
Thanks in advance
Bryan

Hey John,
For the 9606 there is a Real-Time clock (RTC) onboard that will use a battery to keep time even if the sbRIO is powered off. Please see the specification manual. http://digital.ni.com/manuals.nsf/websearch/E065536DC595BDD886257C2E00704610
Once youve set the time the RTC will keep ticking away while powered and when powered off the battery will keep only the RTC powered. So on the next boot the time is kept because of the RTC. You'll need to connect a battery to the RTC VBat line documented in the specification.
Kyle Hartley
RIO Product Support Engineer
National Instruments

Is it possible to set bind variable for picklist?? for messageChoice

we are trying to develop one new page in local JDeveloper.
we have requirement for passing a bind variable to a picklist. is it possible?
Item Type : messageChoice
Query:
SELECT DISTINCT TO_CHAR (effective_date, 'YYYY') TYPE
FROM pay_assignment_actions a, pay_payroll_actions b
WHERE a.payroll_action_id = b.payroll_action_id
AND assignment_id =
(SELECT assignment_id
FROM per_assignments_x
WHERE person_id = :person_id AND primary_flag = 'Y'
AND assignment_type = 'E')
AND a.action_status = 'C'
AND b.payroll_action_id IN (SELECT payroll_action_id
FROM pay_payroll_actions_v
WHERE action_type IN ('P'))
AND b.payroll_action_id IN (SELECT payroll_action_id
FROM xxilo_pre_payments)
ORDER BY 1 DESC
processRequest() code:
PayslipAMImpl am=(PayslipAMImpl)pageContext.getApplicationModule(webBean);
YearPicklistVOImpl yvo=(YearPicklistVOImpl)am.getYearPicklistVO1();
Number t = new Number(pageContext.getEmployeeId());
yvo.setWhereClauseParams(null);
yvo.setWhereClauseParam(0,t);
for this query & code we are getting
ERROR:
java.sql.SQLException: Missing IN or OUT parameter at index:: 1
if we hardcoded person_id in query to some value then we are getting results without any error.

user603084 ,
In the query you have specifies bind variable as :person_id , but in your VO execution code you are setting value for bind variable :1
yvo.setWhereClauseParam(0,t);
You need to change the bind variable in query , like :1
and then execute the query of VO, as you have done. Also do executeQuery, after setting bind variables.
--Mukul

Is it possible to set frame size for a new project ?

Hi all,
i would like to create a video in which there will be 2 videos playing the same content from a different angle.
Each video is 512 x 384 .
So i would like to set the frame size of the project as 1024 x 768 in order both videos to exist.
I searched around for tutorials regarding this but i didn't find anything similar.It seems as if i cannot set the frame size of the project from the start.
So,is there a way to do this?
Thank you for your time reading this.
Regards,
nikits72.

Hi and thank you for your answers.
@->shoternz
It will be displayed in my monitor and probably on you tube.Btw your remark on size was very accurate.Didn't think of that.
Although i could use a little bigger height to use it to display a logo or something....
I am very premiere newbie as you can understand.
Regards,
nikits72

Is it possible to set a default for "Time Span"?

AME seems to default to the Time Span to "Work Area" when rendering AE compositions. Is there any method, either in the app or by preference file hackery, to change this default to "Entire Composition?"
Coming from rendering in AE, this is a major problem for my workflow. You can't save this setting with a preset, like you can in AE, so I have to manually set this on every single comp I render. When I inevitably forget (about half the time or more), I end up with partial renders or having to cancel renders and start them over. Not fun.
I have submitted this as a feature request.

I miss appointments b/c of this too.
And no, Apple does not read these forums UNLESS you comment on how pathetic and Mickey Mouse certain elements of their software is - like no 'default' setting for alarms in iCal, and not being able to resize windows from all edges (vs. the little annoying corner) etc etc.
I hope they fix it with the new software package in Leopard. I'm somewhat afraid it's going to be 'Leper' at first though. We'll see...

Is it possible to set a password for opening file ...

Hello,
After copying a file( word doc or xls) to E72, I would like to set password for opening that file. Is there a way to do this ? I would like pwd protection for opening the file in quickoffice , so I am not looking at a password protected office document as those E72 cannot open.
Thanks

No one here would know why Apple does anything unless they announce. We are all iphone users just like you.
http://www.apple.com/feedback

Is it possible to set up iCloud for my iPhone from my Mac?

Basically I can't find my phone and JUST remembered that the find my phone app existed. I'm almost positive I have icloud set up on my phone, but is it possible to find it from my mac even though I technically didn't have the "find my phone" app downloaded on my phone? Or can I even just find it using the devices under my Apple ID account?

You can track your phone if the Find my iPhone app was not installed. That app only allows you to track all your devices, but what really minds is that the Find my iPhone service was activated in Settings > iCloud. If so, you can track your device.
To track your iPhone, open http://www.icloud.com, log in with your Apple ID and choose Find my iPhone. You will be able to track your iPhone if Find my iPhone was activated. If not, you cannot enable Find my iPhone if you do not have the phone.

Is it possible to set a password for the camera roll without jailbreak?

Why don't apple add this feature to iphone software update? I don't wanna type password again and again to awake my iphone. The only thing I need password to get access to is the cameral roll !! I really don't want to jailbreak. Hope apple would consider my thoughts.

No one here would know why Apple does anything unless they announce. We are all iphone users just like you.
http://www.apple.com/feedback

Is it possible to set a bookmar for BT Email (@bti...

Similar Messages

Maybe you are looking for