Is it possible to set a laf to only one component in the application?

I'm developing a GUI and wanted to know if it is possible to set a particular laf to one of the guis components, thanks a lot.

I believe that the LAF of a component is determined by the current LAF when the component is created. So I think you can create and display you GUI normally. Then switch to your other LAF to create your component and then switch back to the default..

Similar Messages

Is it possible to set my IPhone 5S to automatically backup to the Verizon cloud or to backup assistant. The only settings I see is where it will remind me to do. Can it be set to automatically do this, like my Droid did.

Is it possible to set my IPhone 5S to automatically backup to the Verizon cloud or to backup assistant. The only settings I see is where it will remind me to do. Can it be set to automatically do this, like my Droid did.

We want your information backed up as easily as possible, Todd536. With Verizon Cloud, you can not only tell the application when to back up automatically, but what you want backed up each time. Visit http://bit.ly/1f5sO4P for all the steps to manage your Verizon Cloud on your iPhone.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

To set a dropdown list for one column in the excel file before downloading

Hi all,
I am downloading an excel file which has the format of an internal table with a number of fields. I want to set a dropdown list for one column in the excel file. How can i do this?
Thanks

HI ,
U can use function module " QINT_GET_EXCEL_DATA " ....
and modify the excel sheet based on ur requirement ......
Try this ...
Hope it works
Thanks
Shambhu

Is it possible to enable to VSS with 6500 chassis when only one chassis have the WISM ?

is it possible to enable to VSS with 6500 chassis when only one chassis have the WISM ?

thank you very much for the reply, that mean both the chassis no need to have the same modules installed on both the chassis .

Hi, i am looking to set cells so that when one number decreases the other increases. The catch is that when the first number goes up the other stays the same. And when it starts decreasing again the other builds up. so forth

Hi, i am looking to set cells so that when one number decreases the other increases. So say cell A is at 5, and cell B is at 0. When Cell A goes to 4, Cell B goe to 1. The catch is that when Cell A gets down to 1, and i change it to 5 again, Cell B will be on 4 and start incresing from that point on when cell A decreses. This is to show an amount of sales within a company when stock is sold.
Example:
A = 3
B = 0
A = 2
B = 1
A = 1
B = 2
A = 3
B = 2
A = 2
B = 3
A = 1
B = 4
A = 3
B = 4
A = 2
B = 5
Sorry if this sounds confusing.
Many Thanks,
Oliver

Can't be done, in a single cell, for the reasons given by Jerry.
But not difficult in a column:
I've moved the columns one to the right to put them in the body cells of the default Numbers table.
Current stock is listed in column B, with results of increases and decreases entered manually. Any increase is assumed to be a restocking, and does not affect the sales to date figure in column C. Any decrease in stock is regarded as a sale and increases the current total in column C by the amount of the decrease.
Until an entry is made in B, the corresponding cell in B will show a hyphen. This can be changed by changing the text between the quotation marks in the formula.
Enter the formula into C3 and Fill it down the rest of column C.
Regards,
Barry

Why can I not set a member attribute when there is only one child below the member?

Why can I not set a member attribute when there is only one child below the member?The "member attribute" tab on the properties window of App Manager is grayed out. What am I forgetting?TIA,Craig Wahlmeier

Most likely because Essbase is creating an implicit share relationship between the two members, which is causing the association tab to be grayed out. Tag the parent member with the "Never Share" attribute and see if that fixes the problem.Regards,Jade-----------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

HT204053 i am having iphone3gs and ipod4s, is it possible the application that i have purchased in my iphone can be available in my i pod by doing payment only one time for the same application in my i phone...if yes,plz let me know hw it is possible

i am having iphone3gs and ipod4s, is it possible the application that i have purchased in my iphone can be available in my i pod by doing payment only one time for the same application in my i phone...if yes,plz let me know hw it is possible..

Open the App Store on your device.
Make sure you are signed in with the same account used for the original purchase.
Tap on Purchased from the bottom navigation bar.
On iPhone or iPod touch, tap Updates from the bottom navigation bar, then tap Purchased.
Locate the app in your Purchased tab.
Tap the download button (cloud symbol)
See also: http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US

Is it possible to set a hand cursor on an image in the JTableHeader?

I want to change the mouse cursor to a hand when the user rolls over a sort button image that is contained within the table header.
I have customized (quite heavily) the JTableHeader so that I can activate a filter popup and a sort action by clicking in the JTableHeader for any given column.
I know that the JTableHeader renderer is basically a snap shot of the components that are defined within the renderer, but there must be some way to capture the mouse rolling over the sort icon, and give the user a hand cursor to let them know they can click in that area.
My header is defined as JPanel. Within the JPanel, I have one icon to indicate whether the column is required, another one to indicate whether it is a look up value, another icon to let the user sort, and another icon to let the user filter. Also, I have a JLabel to hold text (for the label).

I've spent a few hours now trying to figure this out and nothing is working.
One of the things I tried was adding a component listener to the component returned by getTableCellRendererComponent. My hope was that component must be sized before it is painted into the header. If I was able to capture the size of the component, I could store the coordinates of the individual components...However, I wasn't able to capture any of these events.
Also, I tried to override the paint method in the UI class and retrieve the coordinates of the sub components as they are painted into the header. This resulted in some odd painting behavior.
As I started thinking more and more about it, I was wondering if it is possible to rework the header so that it does not employ renderers and headers. I understand that the components are "painted" into the header instead of added to the header, because performance would suffer otherwise. However, this is just a header.
It would be so much better if I could stick some components in each column header and interact with these components in the normal manner. I looked at the JHeaderTable code and the associated UI class and don't know where to start.
Again, is it possible to subclass JTableHeader and make it so that I can add components to each component header so that I can interact with it, instead of having this non-interactive picture of a component at the top of the header?

Possible for POJO to have a set of children with only one table?

I have a situation that I'd like to model with Hibernate, but I'm not sure how to proceed.
I've got two objects: Filter and Criterion. Filter has a java.util.Set of Criterion children.
I currently have a schema with two tables: FILTERS and CRITERIA. The FILTERS table has nothing more than a primary key. CRITERIA has a foreign key relationship with FILTERS. I have a FilterDAO that will query the FILTERS table and bring back a Filter object that will use the one-to-many, parent-child relationship between the two tables to populate the Set.
A DBA here has pointed out that the FILTERS table is anemic - it has nothing more than a primary key. She suggested that I eliminate it and go directly against the CRITERIA table to populate that Set.
I'm so used to thinking about these things in terms of primary/foreign key relationships that I'm not seeing how to accomplish this with Hibernate. Is it a mere <set> declaration that populates the child java.util.Set<Criterion>? The WHERE clause would have to include a filter type. Is that where the JOIN has to come? Is the two table schema absolutely necessary, or can I get away without it?
Hibernate allows the object model to be more fine-grained than the schema. The classic example is a PERSON table that has address information it in. I can model this on the object side using Person and Address classes and ask Hibernate to fetch the Address state as a component. Is this the same situation as my Filter and Criterion?
Sorry if I sound confused, or if the question rambles. I guess I don't understand Hibernate well, because any time I get off the beaten path I fall into a hole.
%

Well, you're more advanced than me with Hibernate. I'd be very surprised if that were true, DrClap. 8)
I can't even get one-to-many relationships working the
way I'd like, every time I think I have it right
(i.e. just the same as the examples) it gives me some
guff about backreferences not existing.I'm finding Hibernate to be a bit difficult, especially when I don't have control over the schema. Our DBAs don't seem to follow all the "best practices" that Hibernate recommends.
So my advice might not be the best. But if you don't
have the Filters table, but you still need to get all
the Criterions with "filter key" = x, then isn't that
just a Query? Sure, you get the data back as a List,
but you can wrap that in a Set pretty easily.I've gone back to the DBA and concluded that we have to have a FILTERS table (there's a FILTER_TYPE descriptor field that I've added). It's back in, so the 1:m with CRITERIA should work fine.
But it begs the question: Does Hibernate and O/R mapping demand at least one table per object?
If I look in "Hibernate In Action" on page 92, it says "A major objective of the Hibernate project is support for fine grained object models" - more classes than tables. There should be an adjective "persistent" applied to classes in that phrase, because I can have many more classes that are not persisted.
So I take this to mean that the limit is one persistent class per table, but never less. True?
%

How to set focus to required component in the application

Hi all,
Based on user events, I want to set focus dynamically to required component/panel in the application.
Is this possible? is yes, pls give me api for that!

[http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JComponent.html#requestFocusInWindow()]
A panel is not focusable by default.
If you want a panel to get the focus you have to use panel.setFocusable(true) first.

Since I have multiple users of my itunes account, is it possible to redeem a giftcard where only myiphone can access the redeemed money?

Since I have multiple users of my itunes account, is it possible to redeem a giftcard where only my iphone can access the redeemed money?

Yes, you can use another server for .ibooks format. You can also directly email it if your system can take the size.

All rows in a Set get updated when only one row changes

I have a complex object, which contains a Set of child objects. If i modify one of the child objects and put the object back in the cache, coherence will issue a sql update for each of the child objects, even though only one changed.
I'm using hibernate, and when i do this in straight hibernate, that doesn't happen, only one sql update gets issued for the row in question.
I found this because i have a timestamp column that automatically updates when the row gets updated, but since all the child rows are updating, this timestamp gets updated as well which breaks the biz logic.
Am i missing something? Clearly it's inefficient to issue updates on all the child rows when just one changes. Is there some way to avoid this?
Using coherence 3.5.3.
Thanks.

This turned out to be an issue with POF serialization of a Date object. It was doing it incorrectly, it would get the day correct, but the HH:MM:SS would be set to the current time. Since the object had been changed, when i persisted the parent, all of the child rows would persist as well since their "modify_date" attribute had been changed. Eg, if the date in the DB was "2010-07-14 03:10:00" when i read the object in, the value would change to "2010-07-14 HH:MM:SS" where HH:MM:SS would be set to the current hours/mins/secs.
I changed the code to use my own serialization of a Date object (just used the long) and things worked fine after that.
Is this a known issue with pof serialization?

Is it possible to set up Time Capsule on one network and then access its stored data (movies) using Back to My Mac from another network that also has Apple TV to play them?

I recently purchased a Time Capsule to store data at my office. I have an Apple TV at my home that I would like to start using to play my movies. With the storage of the new Time Capsule, I am curious if I can somehow store my iTunes movies on the Time Capsule at my office and then use Back to My Mac to access the TC from my home and then play them via Apple TV. Does this sound possible? We have an iMac at the office that remains on 24/7 connected to the TC.

ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
You cannot play movies from ATV without itunes, which streams to the ATV.
If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
The next issues is speed of slowest connection.
Your download to your home maybe great.. what is the upload speed from your office like??
If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net.. and third to download it again.. net to home.. Sorry but it is better to play the movie directly from online itunes store.
If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
Overall this sounds like you need to think it out a bit more.

How can i get the homepage i want to remain the perminate homepage? I have done everything it tells you to set homepage and it only saves it while the current browser is open. When I close out browser and reopen it is gone.

When i set the homepage of my choice it will only remain until i close out the browser. once i reopen the browser it is no longer there. The past version of firefox would keep the homepage of choice. I have done everything that is necessary to set homepage and it will not save it. What needs to be done?

Which web page is getting reset as the homepage?
You probably picked up some malware, maybe as a result of installing that My Web Search Plugin Stub for 32-bit Windows.
Install, update, and run these programs in this order. They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. '''''(Not all programs detect the same Malware.)'''''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

I have 20 ipads to hand out to teachers, all of them are using the same apps (purchased), I'm using 1 computer to configure them, I purchased 20 gift cards to purchase apps, how can I set up all 20 on one library using the gift cards to purchase the apps

My office purchased 20 ipads - and 20 gift cards, I'm setting up all the software on my computer using 1 itunes library.. I need to purchase 20 of the same apps to put on each of the ipads... how can that be done when you purchase the same app..itunes tells you that you the app is already purchased...

Another member pointed me toward the following site...it contains some great info...it's focus is on the use of iPad's in education....
http://ipadeducators.ning.com/
There is some discussion in there of device "cloning"..though I don't see how they can do that and at least not technically violate the iTunes Store EULA....(1 license can be used by 1 person on multiple devices, or by many people on one device). As I understand it, and as Michael indicated, the only way to do what you want and not violate the EULA is to have 20 different Apple ID's...what the "cloner's" have chosen to do is use the Educational VPP www.apple.com/itunes/education
purchase sufficient licenses for all users, allocate a license to one Apple ID, clone that image to other iOS devices, and simply record the fact internally that the additional license(s) have been allocated to other Apple ID's....I work in healthcare, and our legal department isn't comfortable with that approach, and I can't see it really being legally viable in education....unless their are different terms for educational institutions....

Is it possible to set a laf to only one component in the application?

Similar Messages

Maybe you are looking for