Is it possible to set a "query in change mode" with the Report Designer 7.x

Hi,
I have a query set in "change mode" with an index set as "data can be changed using user entries or planning funcionts".
If I use this query as a "Data Provider" in the Report Designer, the result is still in "change mode" or a result of the Report Designer is only a static image?
Thank's,
Valentina.

Hi Deepu,
I had suspected this...
Thank you very much!
Regards,
Valentina.

Similar Messages

The query contains a formula with the operator SUMCT

I m trying to get query ready for Webi, getting the error as 'The query contains a formula with the operator %RT. Therefore, the query cannot be released for OLE DB for OLAP'
I have not used any kind of s %GT, %RT, %CT, SUMGT, SUMRT, SUMCT and LEAF, also i have suppressed results / over results from the query, over to it, i have removed the calculate results as 'summation' feature and set to 'not defined' for all of my key figures.
Still getting the error...
Please suggest.
Niraj

hi,
Ensure that all Link IDs are visible in the lsdal.ini file located in the \Windows\system directory of the PAS Server as those are then available to all users. The lsdal.ini file may not be correctly updated if: - You have created the BI Link IDs while using PAS in Client Server Mode - You have enabled multi user access for remote desktop. In this case an additional lsdal.ini file may appear in the user specific Windows directory of someone who may have remotely connected to the system to create the Link ID. That additional lsdal.ini file will only be valid for that specific user.
Also try adding "ODBOSECURITY=0" entry to the end of the c:\windows\lsserver.ini file on the server.
hope it helps
regards
laksh

In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the Paragraph Designer.

In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the paragraph designer. Here are the steps to dysfunction:
1. In Paragraph Designer, for Tab Stops, click Edit. Edit Tab Stop dialog box opens, and the Paragraph Designer dialog box closes.
2. Type value in New Position box.
3. Click Continue. The Edit Tab Stop box closes.
4. Open Paragraph Designer. No tabs are recorded.
Discussion of a similar problem occured on this forum in June 2010. At that time, the resolution seemed to be to upgrade to 9.0.3. Has anyone else encountered this problem with these versions?
Thanks.

Hi, Arnis,
Brilliant! Thanks so much. I only looked at the later discussions of that thread, which seemed to indicate the problem would be solved by an upgrade to 9.0.3.
-Trish

Is it possible to start a MacBookPro in target mode with a MacBookAir?

Is it possible to start a MacBookPro in target mode with a MacBookAir?
I have a MacBookPro and I would like to start it in a target mode using a MacBookAir as a disk cible,
is it possible to do it? Which cale or adapter do I need to do it?

namdev1 wrote:
Is it possible to start a MacBookPro in target mode with a MacBookAir?
Yes, you can use Target Disk Mode with a suitable adapter:
OS X Lion: Transfer files between two computers using target disk mode
To determine the cable you need requires you describe which MacBook Air and MacBook Pro models you have. The latest ones have Thunderbolt ports, for which you can use a Thunderbolt cable. If the MacBook Pro has only a FireWire port, you can use a Thunderbolt to FireWire adapter. Early MacBook Air models have neither.
Search for cables and adapters on Apple's website:
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
http://store.apple.com/us/product/MD862ZM/A/apple-thunderbolt-cable-05-m

How is it possible that a target has two deltas requests with the exact sam

HI,
How is it possible that a target has two deltas requests with the exact same records?

Hi Mohammed,
There are couple of reason behind it.
main reason is
take one scenario we have DSO as source and cube as target.
Now DSO contains only 1 request, which i have loaded to cube by using delta.
after that i have deleted DSO content by using right click on it and delete data.
(hope u know that it will not delete request from target automatically)
now once again i have loaded same request from datasource to DSO
and then loaded delta again from DSO to cube.
In this case for 1 single request in DSO you can see 2 request in cube with same data.
Regards,
Ashish

How to pass an array or structure, in addition to a query, or multiple queries to the Report Builder as parameters

Is there a way to pass an array or structure for example as parameters, in addition to a query, or multiple queries to the Report Builder in CF8? I believe this was recommended by users to be in CF8.

BrianO,
Although it's been a while, I thought I'd provide the code to do this for you. It works for me in CF8, and probably will in CF7.
Here I create a structure called My, and provide that one parameter to my CFReportParam tag.
<CFSet My = {
Client = "Client Name",
ReportDateFrom = DateFormat(ThisStartDate, DateMask),
ReportDateTo = DateFormat(ThisEndDate, DateMask),
PageHeaderImage = ImagePath & "\Logos\Page_Header.png",
WatermarkImage = ImagePath & "\Logos\Watermark.png",
GetBarSummary = GetBarSummary,
GetPieSummary = GetPieSummary
}>
<CFReport Template="#ReportPath#\SpendSummary.cfr" Format="PDF" Query="GetSummary">
<CFReportParam Name="My" Value="#My#">
</CFReport>
Inside the report itself, reference the given parameter as Param.My.PageHeaderImage for example. It can be referenced that way from any expression inside the report builder. You can even use the queries as the data source for charts (using the Data From a Query -> Query Builder -> Advanced) by entering "Param.My.GetPieSummary" where it says "Variable containing query object".
HTH
Swift

Is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

Hi,
There will be a “Post” list in that user’s MySite storing all the blogs that below to that user, we can delete all the blogs in that list if with sufficient permission in that
user’s MySite.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Possible print in greyscale or black&white mode with empty color cartriges?

Possible print in greyscale or black&white mode with empty color cartriges and black full? (HP Photosmart Photo D7163)
Message Edited by aksser on 06-11-2009 02:12 PM

With some printers it is possible. Try going to the printer properties and selecting Grayscale pprinting.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

The Report Designer does not support this query drill down colum

Iam working On BI7 When iam doing report desingner when iam opening query through data provider
Iam getting thsi error The Report Designer does not support this query drill down colum colum axis may contain one structure only remove additional dimensions
I modify the cube and i remove some dimensions also My problem is when iam putting characterstics in Colums Iam getting this error When iam removing that charcterstics from colums it was not throuing any error
Chaitanya

hi,
report designer is for front end view design and the designcan be done with restriction to navigation.
you have dynamic and static report designs with restricted navigations.
chk the links for document
http://help.sap.com/saphelp_nw04s/helpdata/en/dd/cea14119eb9f09e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/17/16d941de405f24e10000000a1550b0/frameset.htm
Ramesh

HT1222 Is not possible to update my iPod touch 2nd generation with the iOS 5??? is it only for 3rd generetion???

Is not possible to update my iPod touch 2nd generation with the iOS 5??? is it only for 3rd generetion???

iPod touch 2nd gen can go up to 4.2.1.
iPod touch 3rd or 4th gen can go up to 5.0.1 (and future updates).

Can I set up a 5.1 surround with the headphone output?

Can I set up a 5.1 surround with the headphone output? I've got everything connected to the headphone output but it doens't seem to work very well.
This question was solved.
View Solution.

Great Question!
The output on the notebook is 2.0 unless specified.
Most 5.1 headphones make a virual surround sound experience unless they require multiple mini jack inputs, optical, or coaxal.
The only way to experience true 5.1 on a notebook is to have an internal 5.1 card (which is not included in current HP notebooks) or purchase an external to plug in (USB or ExpressCard).
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

HT201328 I CONTACTED WITH THE CARRIER BUT THEY SAID BECAUSE I GOT THIS IPHONE MOBILE SET FROM THE INSURANCE COMPANY SO THEY CANT UNLOCK THE SET, THEY TOLD ME TO CONTACT WITH THE APPLE

I CONTACTED WITH THE CARRIER BUT THEY SAID BECAUSE I GOT THIS IPHONE MOBILE SET FROM THE INSURANCE COMPANY SO THEY CANT UNLOCK THE SET, THEY TOLD ME TO CONTACT WITH THE APPLE

WHY ARE YOU YELLING AT US!
You are not addressing Apple here, just users like you.
Go here, find the number and call Apple:
http://support.apple.com/kb/HE57

Is it possible to sync my email on my iPhone with the email on my Mac.

Is it possible to sync my email on my iPhone with the email on my Mac. I have a hotmail account as well as a Uni email account and when I read emails on my phone, I would like it to update my emails on my mac so that Im not deleting or reading the emails twice?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Answering quickly, though, no, iTunes will not natively sync with non-Apple products. There may be workarounds, though. Ask in the iTunes forums.
Regards.

Is it possible to use Adobe Illustrator in multiple computers with the same account?

Hi guys,
So our company is a small designing tile company,
we wanted to purchase the Adobe Illustrator and was wondering if it was possible to use it in multiple computers with one account, as we have two computers that are frequently use for designing, or do we have to buy two separated Adobes Illustrators for each computer?
Thanks

From the End User License Agreement (EULA):
2.1.3 Portable or Home Computer Use. Subject to the restrictions set forth in Section 2.1.4, the primary user of the Computer on which the Software is installed under Section 2.1 (“Primary User”) may install a second copy of the Software for his or her exclusive use on either a portable Computer or a Computer located at his or her home, provided that the Software on the portable or home Computer is not used at the same time as the Software on the primary Computer.
So, while it CAN be installed on more than one computer, they may not both be in use at the same time.
--OB

Set document name when use PrintToPrinter with Crystal Reports 2008

Hy,
from my application, in .net environment, I print report on printer at runtime with PrintToPrinter command,
but all documents that I print have the same spool name: "document".
Is there a possibility to set this name ?
Thanks
Filippo

solution below:
How to set the CR print job name that displayed in Printer job queue?

Is it possible to set a "query in change mode" with the Report Designer 7.x

Similar Messages

Maybe you are looking for