Is it possible to set individual future clock alarms?, Is it possible to set individual future clock alarms?

Using Apple's Clock app, is it possible to set single non repeating single alarms in the future?
Today is Wed. I want to set up my next 2 weeks with different daily wake up alarms, so I can't set any and use repeat.
When open Clock, press +, I get the setting window which only has times, no days. So it appears I can only set today and only certain repeating future alarm days.
But I can't figure if I can setup for example:
Thu - 7am (one time)
Fri - 8am (one time)
Sat - 9am (one time)
Am I just missing how? Or does Clock not allow this? I'm on vacation and have different daily wake up time needs.
Thanks
Steven

Yes. I'm actually at a conference so I know every day I need to wake and each is different.
So playing with weekly repeats as a workaround, I see your idea but wouldn't a simple date field be easier?
Now that I see it's impossible. I think the best way is to use the calendar and set an alert. So each day I need to wake at a certain time, I simply create an event called WAKE and set an alert for it.
Yes I don't get the snooze feature, but once I'm up, I'm up. So that will be best albeit it a wast of text on my calendar which I can of course always delete.
Thanks,
Everyone.

Similar Messages

Is it possible to set a new default ringtone for alarm clock?

Just wondering if it is possible to set a specific ringtone to all alarms in the alarm clock without changing each alarm individually? My husband needs a MUCH louder alarm tone than the default.
Thanks.

Thank you for posting.
When you say "Is it possible to set a minimum sale amount for eCommerce - $20 for example?", are you saying the customer should not be able to check out if he has less than $20 in the shopping?
If so, then it is not possible. I've not seen such kind of custom set up in BC yet. However, I'll leave this post open. If any of our partners have done it before, they might be able to help you.
Regards,
Aishvarya Raj Rastogi

All future MacBook with 10.7 Lion will be set to 64bit kernel by default always ?

Dear Apple and Mac Expert,
Actually I hope Apple can answer this if possible or someone can redirect me to any Apple post ?
I learned that right from 10.7 Lion available, the default kernel mode is always set to 64bit no matter installed in MacBook White or Pro. I am wondering is it same for all future MacBook Air and Pro that come with 10.7 Lion will be set to 64bit kernel by default??
I really need a confirmation on this to support my future plan.
Appreciate Apple can answer this or someone can help.
Thanks in advanced!

Apple typically does not answer questions here. Further, your question invites speculation about future product releases, which is specifically forbidden in the Terms of Use for these forums.
That having been said, Apple usually looks forward, not back. Once they remove something it is usually gone forever. Witness the floppy drive disappearing in the late 1990s.
Best of luck.

Im having problems with my Kids facetime accounts that seem to be because they are both using my itunes and there are conflicts with multiple email addresses? Is it possible to now set the kids up with their own accounts without losing their apps etc

Hi All,
I have my kids using iTunes via thier ipods etc through my own account and this hase been the case for some time?
This has started to cause issues lately with imessaging and facetime, as there seems to be a limit on email addresses that can be associated with one account?
I wonder if I would be best off setting the kids up with their own accounts, but want to be able to do this without them losing their existing apps, music etc?
Is this possible, if so is there a simple process cos I can seem to find anything relating to this?
many thanks, Jim

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Alarm clock not working in iOS 7 with multiple alarms set.

I usually have two alarms set on my phone, both using the stock clock app. One about an hour before I need to get up (so I can turn the heater on and crawl back under the covers), the other for the time I am supposed to get up. The second alarm works just fine, but the fist one has not gone off for several days. They are not recurring alarms because I need to change the time each day due to my work schedule.
The phone is *usually* in a speaker dock which is plugged into the wall, and works just fine for the purpose of playing my second alarm or any of my music. When not in the dock, it is still plugged in to the charger but uses the built in speakers.
Has anyone else had this problem, or does anyone know of a possible fix?
iPhone model: iPhone 5
iOS Version: 7.0.2 (will be updating to 7.0.3 when I return home from business on Nov. 1st)

Use IHome Sleep. It is great!! You don't need an IHome either!!
Download Below:
https://itunes.apple.com/us/app/ihome+sleep-alarm-clock-app/id346249053?mt=8

Is it possible to have Clock in and clock out times in weekly view

Hi,
We have Daily View and Weekly View in Record Working Time iview in ESS.We can set the Clock in and Clock out times in Daily view if we check the With Clock Times checkbox in Data Entry Profile.But we want to have same Clock in and Clock out in Weekly view without any developement.
If it not possible thru config how much will be the Development Effort
Thanks
Bala Duvvuri

Siddharth,
can you please elaborate this
Thanks
Bala Duvvuri

Is it possible to have clock in and clock out in weekly view

Hi,
We have Daily View and Weekly View in Record Working Time iview in ESS.We can set the Clock in and Clock out times in Daily view if we check the With Clock Times checkbox in Data Entry Profile.But we want to have same Clock in and Clock out in Weekly view without any developement.
If it not possible thru config how much will be the Development Effort
Thanks
Bala Duvvuri

Hi Bala
You can have clock in and clock out in a weekly view.
you have to change the data entry profile settings.
In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
And you can view the weekly entry in clock in and clock out.
Ravee
+91.99206.33669

"Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
Matt

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Is it possible to set BOM's Assy Qty to zero

Hi All,
We have a requirement that a consumed material is cannot defined how many qty would be consumed.
For example, a SFC will consume a component material (like Ink). User will mount a bottle of ink onto a machine when the ink is empty. In other words, they cannot define how many consumed qty of each SFC, just replace with a new Ink when the ink is empty.
I would like to ask is it possible to record a SFC assemble which Ink inventory_id and don't care consumed qty? I have tried to set Assy Qty to zero, but SAP ME does not allowed.
Thanks!

SAP has never recognized this legitimate need in BOMs. There are multiple reasons why they should allow quantity zero:
Reasons Why You Need Qty 0 in BOMs
1.      A/R Materials (As Required): Lubricants or Adhesives required to build a product are not rationed out by the drop, or by the bottle, but left to the assembler to determine the appropriate quantity based on SOE instructions. On the drawings, Engineers will call out A/R (as required) in the qty box.
2.     Variable qty items: Shims or trimmer balance weights are issued as one each, but cannot be determined until the assembly of the product occurs. As appropriate, differing quantities are issued to the product to fit the need for the specific machine being built.
3.     REF Materials. Quite often, assembly drawings will need to show the mating interface with other parts of the machine which are not actually part of the assembly. In this case, we would show the interface as u201CREFu201D on one assembly, but as quantity u201C1u201D on another assembly.
4.     Tooling: Tooling needs to be tracked and linked to the assemblies that it is used on. But it does not get consumed on a one-for-one basis with the assembly. So we want to use SAP where-used capability by linking each tool within each BOM where it is relevant, but show the quantity as u201C0u201D. On the drawing tooling is called out as REF.
5.     Must Choose Optional Choices: On u201Cassemble-to-orderu201D products, one of several different choices may be needed for various parts of the machine configuration. These u201Cmust chooseu201D options are items where the machine will not be functional without one of the available choices (such as three choices of tires on a car. The way these options are handled on the drawings is by showing them with Alpha characters in the quantity field where you u201Cmust chooseu201D one of the u201CAu201D items, one of the u201CBu201D items, and one of the u201CCu201D items to have a fully configured, workable machine. On the BOMs, we call out all the choices as qty 0, with a note to refer to the customer sales order for which choice has been made.
6.     May Choose Optional Choices:   On u201Cassemble-to-orderu201D products, in the case where an option is a u201Cmay chooseu201D option you may either order or the option or not; the machine will operate fine either way. In this case the option would show on the drawing with an u201C*u201D in the quantity field and on the SAP BOM, you would call out quantity u201C0u201D with a note to refer to the customer sales order for which choice has been made.
7.     Acceptable Substitute Items: In some cases two interchangeable part numbers may be acceptable to use in the product. For example, two manufacturers make RF drivers that are fully compatible and work fine in our machine. But Field Service required the use of two distinct part numbers for reliability tracking, so the drawings allow for either part A or part B to be used. Depending on the current cost/reliability/availability of the two parts, we will designate one item as quantity u201C1u201D in the SAP BOM and the other item as quantity u201C0u201D. On the drawing, you call out one item as quantity u201C1u201D and the other as quantity u201C*u201D with a note explaining the ability to substitute one item for the other as desired.
8.     JIT KIT support: In order to efficiently procure and build product, we may create documents that are u201Csetsu201D of material that can be procured on a single PO. So we end up with one set of drawings depicting way the machine is built and resides in the field for the next X years, and another group of drawings defining sets of material in special packaging aiding in efficient build of the product. On both groups of drawings the quantity would be u201C1u201D (or whatever qty is needed on the machine) but in the SAP BOMs, only the JITKIT BOM would have a quantity >0. The manufacturing BOMs would call out the u201Csetu201D as qty 1 but all the individual pieces of the set would be called out as qty u201C0u201D. In that way when you look at the where-use of a component in one of the sets, you would be able to determine what assembly drawings the item appears on, and also which drawing is the u201Cactiveu201D driver of the material.
9.     Request to move certain items to later in the build process: Assembly drawings usually show the assembly in the finished state, as the assembly will look out in the field being used by the customer. But internally in the factory we often desire the assembly to be built to an unfinished level with some pieces missing to allow for easier testing of the full product. Or we may choose not to put the final cosmetic touches on a machine until close to the shipping point in order to avoid scratching or denting of exterior surfaces. For example, a modulator assembly will be built with recyclable in-house panels and only have the finished panels swapped out for the recyclable tooling panels at the clean, pack, and ship operation. Other assemblies will have access panels omitted altogether to allow for easy access for machine tuning in final test. These missing panels would be added at clean, pack, and ship. So in the SAP BOMs, we change the quantity from u201C1u201D to u201C0u201D in the assembly BOM, and create separate BOMs showing quantity u201C1u201D with the clean, pack, and ship items that complete the assembly built days or weeks earlier.
We have more than 25,000 occurrences of these types of needs for quantity zero in the BOM. Our work around (until this SAP "bug" is fixed is to assign qty .001, then uncheck the production and costing relevancy within the BOM (Item Status Long Text).

Possible to pre-set formatting info for a set of pages in a "chapter"?

Is there a way to pre-set all of the page width, length, padding, etc for one certain “chapter” that I am creating? Also, with this new iWeb version, is it possible to pre-set all the fonts and font sizes for certain parts of the text, like Title, Body, Picture Caption, etc?
lorna from Southern California
Message was edited by: Lorna from Hawaii

Here's a possibility:
Use iWebSites to make separate domain files for each of your sites. (More on how later). Create a new domain/site and create as with all of the pages of the theme you play to use most and manually set their sizes, and fonts, etc. to what you want . Then save the sites a "Default". In iWebSites you can easily duplicate that site file, rename it, open and use it. This would work if you plan to use the same theme. Now for the process to split a current multisite domain file into multiple domain files:
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
It may be more that you want to go thru but it's a thought.
OT

When I try to open editor I get an error message that I am not connected to the internet (which I am) or my computer clock is set incorrectly (which it is not).

When I try to open editor I get an error message that I am not connected to the internet (which I am) or my computer clock is set incorrectly (which it is not).

This is normally to do with activation. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Serial number issues or activating my product
3. Click on the blue button: Still need help? Contact us – then click the button marked “chat now”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Ensure you have your serial number.
Click here to get help now Contact Customer Care

Is it possible to read digital data using an external clock (PCI-6259 M)?

I’m using a NI PCI-6259 M Series card and trying to write my program in VC++6.0 using the functions in the DAQmx driver.
Question1: Not all functions listed in the NI-DAQmx C Reference Help seems to be supported by my NI-card, where can I find information about which of the functions that are supported?
Question2: I want to read data from a device that clock out data on the falling edge of a clock signal. The clock signal and the data signal are routed to two DIO terminals on the NI-card. The question is if it is possible to read data using the clock as a sample clock? See two code examples below that doesn’t work. In both cases 10 samples are read at once, even if the external clock is not present.
Example 1
// Create tasks
Status = DAQmxCreateTask("", &m_ReadTrimTask);
// Set up read task
status = DAQmxCreateDIChan(m_ReadTrimTask, "Dev1/port2/line0", "", DAQmx_Val_ChanPerLine);
status = DAQmxCfgChangeDetectionTiming(m_ReadTrimTask,"Dev1/port2/line6","Dev1/port2/line6",DAQmx_Val_FiniteSamps, 10);
// Read data
int32 sampsPerChanRead, numBytesPerSamp;
status = DAQmxReadDigitalLines(m_ReadTrimTask, 10, 10.0, DAQmx_Val_GroupByChannel, result, 10, &sampsPerChanRead, &numBytesPerSamp ,NULL);
Example 2
// Create tasks
Status = DAQmxCreateTask("", &m_ReadTrimTask);
// Set up read task
status = DAQmxCreateDIChan(m_ReadTrimTask, "Dev1/port2/line0", "", DAQmx_Val_ChanPerLine);
status = DAQmxSetSampTimingType(m_ReadTrimTask, DAQmx_Val_SampClk);
status = DAQmxSetSampClkRate(m_ReadTrimTask, 1000.0);
status = DAQmxSetSampClkActiveEdge(m_ReadTrimTask, DAQmx_Val_Falling);
status = DAQmxSetSampClkSrc(m_ReadTrimTask, " Dev1/port2/line6");
// Read data
int32 sampsPerChanRead, numBytesPerSamp;
status = DAQmxReadDigitalLines(m_ReadTrimTask, 10, 10.0, DAQmx_Val_GroupByChannel, result, 10, &sampsPerChanRead, &numBytesPerSamp ,NULL);

Hello Magnus,
Thank you for contacting National Instruments.
"Question1: Not all functions listed in the NI-DAQmx C Reference Help seems to be supported by my NI-card, where can I find information about which of the functions that are supported?"
The best place to look for this information would be the M Series Help Manual. There you can find the features of your PCI-6259 and what operations it supports.
"Question2: I want to read data from a device that clock out data on the falling edge of a clock signal. The clock signal and the data signal are routed to two DIO terminals on the NI-card. The question is if it is possible to read data using the clock as a sample clock? See two code examples below that doesn’t work. In both cases 10 samples are read at once, even if the external clock is not present."
Look at the "ContReadDigChan-ExtClk_Fn.c" example project which ships with the NI-DAQ driver. This is located at: C:\Program Files\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Digital\Read Values\Cont Read Dig Chan-Ext Clk.
You will have to make some minor modifications to convert this to a finite acquisition, but that is simply a matter of changing the "sampleMode" parameter of the DAQmxCfgSampClkTiming() function. You will also have to route your clock signal to a PFI line and specify which line in your code.
I hope this helps.
Sean C.
Applications Engineering
National Instruments

Will it ever be possible to send SMS messages at a future time using Siri?

As Siri can set reminders and make appointments for the diary, as well as being able to write messages and emails, will Siri ever be able to do both and write messages at a future time?
For example, "At 5:00pm, tell Kay to put the bin out".
Would this be possible and would there ever be a need for something like this?
Also when will Siri be able to find resturants and businesses in the UK as at the moment only US ones can be found.

Nobody here knows what Apple may or may not do...
You can leave Feedback for Apple using this Link...
http://www.apple.com/feedback/

How do I set individual properties for a column in report layout at runtime

How do I set individual properties for a column in report layout at runtime? I need to change this based on a user's input. This is for v10g.
I need to change either the "Read from File" attribute or the "File Format" attribute for one column based on the user's input. IS this possible?
Thanks in advance!

Hi,
define 2 columns and use format triggers to show the one or the other column.
Regards
Rainer

Setting priority on Unit Tests - is it possible?

Is it possible to set a priority level (low, medium, high) to the units within a test package. Not on the test cases, but when the test plan is generated the option "with transaction" is selected. And we are testing the unit/transaction can you set a priority at the unit level so it appears in the workbench (STWB_WORK).
Is so where do you do that?
Thank you
Dan

Dear Daniel,
I think you want to change the status values appearing in the status tab of test plan all the individual test cases.
Go To Tcode STWB_SET.
From here select the status definition and place the status values you are interest in........this will do the needful.
Please reward points if it helps.

Is it possible to set individual future clock alarms?, Is it possible to set individual future clock alarms?

Similar Messages

Maybe you are looking for