Is it possible to set up a stop, if wrong info is put in a form?

Can you set up on a form  if someone puts in the wrong calculation in a required field that they will not be able to continue, ex. if you are tracking miles and you know that it would be impossible for the milage to be over 300, and if someone puts in 301 or greater they will not be able to continue?

This is something that is not supported.
-Jeff Canepa

Similar Messages

  • Is it possible to set up a backup between two external drives

    Is it possible to set up a backup between two external drives?
    i use time machine to back up my imac onto an external 2T.
    i also have two external 3T drives.  i am looking for redundancy of data, tried software RAID and it failed.  i also see some limitations with RAID that a backup would avoid.
    thanks for sharing your expertise.
    be well,
    tony

    so thanks to all of you, particularly rkaufmann87 i have decided to stop the plan of setting up a software RAID set.  instead i have downloaded ccc and am in the process of setting up the secone 3t external drive as a clone.  i will use time machine to back up the internal hard drive only and if possible see if i can clone that as well onto one of the 3t's.
    this gives me the peace of mind i sounght and avoids the problem of total corruption that exists with the raid solution i was exploring.
    thank you all for making this an enjoyable and informative experience.  what a powerful community.
    be well
    tony

  • Is it possible to set a default music player for the music on my external hard drive while still keeping my iTunes the default player on my Mac ?

    Is it possible to set a default music player for the music on my external while still keeping my iTunes the default player on my Mac ?
    Message was edited by: Pellseidon

    There is no setting in the iPhone to set another default music player. The default is Music. If you are using another application, you are at the mercy of how that application operates as far as what occurs when it stops or errors out. The car is looking for music to play.

  • Possible to set min/max size to a resizable Stage? If so, how?

    Is it possible to set a minimum and maximum size to a resizable Stage? If so, how would this be done? Do I use some kind of onResize event handler or is there some other way?
    Here is a sample code where I have a 500 x 500 px image in a 300 x 300 px scrollable scene that is in a resizable stage. Right now, I am able to resize the stage to any size, but I would like to limit the resizable minimum width and height to 100 x 100 px and limit the resizable maximum width and height to 600 x 600 px.
    import javafx.stage.Stage;
    import javafx.scene.Scene;
    import javafx.scene.control.ScrollView;
    import javafx.scene.control.ScrollBarPolicy;
    import javafx.scene.image.ImageView;
    import javafx.scene.image.Image;
    var scene: Scene;
    Stage {
        resizable: true
        scene: scene = Scene {
            width: 300
            height: 300
            content: ScrollView {
                hbarPolicy: ScrollBarPolicy.ALWAYS
                vbarPolicy: ScrollBarPolicy.ALWAYS
                width: bind scene.width
                height: bind scene.height
                node: ImageView {
                    image: Image { url: "{__DIR__}roses.jpg"}
    }

    Hi, I don't understand how WidgetFX is going to allow me to set min/max size to a resizable Stage. After all, it is a desktop widget platform and I'm not trying to build a desktop widget. None of the demos I've tried use a decorated Stage with platform decorations that can be used to drag and resize the Stage.
    I'm just trying to limit the min/max size of a resizable Stage. If you think WidgetFX will address my problem, I think a better solution is the JavaFX Stage Controller class I found available at http://code.google.com/p/memefx/. However, the JavaFX Stage Controller class still doesn't address the problem I have because it doesn't stop the user from dragging the Stage beyond the size restricted by the min/max height. It only reverts the Stage to the max size after the user already dragged and resized the Stage beyond the max resizable width/height.

  • Hi I have two questions. I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users? How is the session timeout set? Thanks, YS

     

    <i>I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users?</i>
    Um, there is no such thing as NAS4.1.
    I'm assuming that you mean NAS4.0 (maybe NAS4.0sp1?). If so, then the session timeouts are specified in the session section of the NTV configuration files.
    AFAIK, you can specify session timeouts on a per user basis.

  • Is it possible to set up multiple iTunes accounts on a single computer?

    is it possible to set up multiple iTunes accounts on a single computer?

    If you do it with a single user account, you will receive update notifications for purchase made on both IDs regardless of which one you're using at the time.  That's slightly frustrating as you get the notification BUT you can't actually update!  In any event, separate user accounts on the computer is the cleaner way to go.

  • My daughter and I have separate iCloud accounts set up on out desktop PCs and our iPhones and iPads. We want to share the usage of a Win 8 laptop and will log in using using separate user accounts. Is it possible to set up our own iCloud accounts?

    My daughter and I have separate iCloud accounts set up on out desktop PCs and our iPhones and iPads. We want to share the usage of a Win 8 laptop and will log in using using separate user accounts. Is it possible to set up our own iCloud accounts in each of those separate user accounts?

    No it is not possible.  Content purchased from the iTunes Store is permanently tied to the account from which it was originally purchased, and Apple does not provide a way to change it.

  • Is it possible to set up a HP Scanjet 8200 series (8290 with ADF) Intel Mac

    Is it possible to set up a HP Scanjet 8200 series (8290 with automatic document feeder) on the new Intel based Mac Pro desktop computer (nehalem 2.93 dual processors, 8 core)? Can anyone please steer me in the right direction -- I tried one of the drivers from the HP website and the install reflected that it does not work on intel based computers. Does OS X Leopard come with some type of utility to help me set up the scanner (I don't see where to set it up)? Thanks.

    Hi Nicky,
    Yes,  you can download and install the software.  Yay!
    HP Deskjet 3050A e-All-in-One Printer series - J611
    Select your printer from the list ...
    Find and open the pdf document titled:
    Install Full Feature Software - Printer
    Good Luck!
    Click the Kudos Star!
    It is a great “Thank You” for the Experts who offer to help!
    Kind Regards,
    Dragon-Fur

  • ThreadOpt values - is it possible to set them and what are the ranges?

    Hi there,
    I have a problem on my TestStand 4.2 platform, with test step result, formed and received from called external sequences results. In my Main sequence, in Post-Expression I defined condition, according to which the "Step.Result.Status" is passed or failed, and it works. But the problem is that in Status Expression field there is following statement: "(Step.Result.Status == "Done" && (Step.TS.SData.ThreadOpt == 0 || Step.TS.SData.ThreadOpt == 3)) ? "Passed" : Step.Result.Status". After deep search in the user manual, I found that (Note from "Expression Tab - Step Properties Dialog Box"): "Certain types of steps, such as Numeric Limit Tests, Multiple Numeric Limit Tests, String Value Tests, Pass/Fail Tests, and Statement steps, reserve one or more of these expressions to perform operations specific to the type of step or a substep performs the operation. In these cases, you cannot use the expressions the step type reserves, which appear dimmed on the tab." 
    Now, my problem is that at this specific step I call to an external sequence, which returns results and it is correct, but if these results, compared to expected are not the same, my step in the main sequence fails. Which is OK. But when the final report is generated I see there "Number of Tests Failed: 0", which is not OK. Since I can't change the "Step.Result.Status == Done", which comes from the external sequence, I thought that may be there is a place to change the "Step.TS.SData.ThreadOpt" and this way to cause to main sequence to correctly report "Failed Tests <> 0"??? 
    Does anyone has an idea whether it is possible to set this the ThreadOpt value and what is the accepted range?
    Your feedbacks and inputs are highly appreciated.
    Stephan

    GSinMN wrote:
    Hello Doug,
      I didn't think I was modifying any hidden properties.  It's just configuring a sequence call step when you add it to the sequence.  The "Execution Options" are clearly shown in a dropdown menu on the Module tab.  I was just pointing out that this seems to be what sets the ThreadOpt variable.  
    GSinMN
    Maybe I misunderstood. When you said "My normal process is to set it to 1, but based on this info, it needs to be either set to None or Use Remote Computer if you want anything other than "Done" to be returned." I thought you meant that you were setting the property directly rather than setting your sequence call steps to "New Thread" with the combobox.
    -Doug

  • Possible to set a default column value to an expression?

    Hi,
    Is it possible to set a default column name to an expression when creating a table?
    For example, I wish to set the default value of a column to read from another table's column and do some arithmetic....is this possible?
    Thanks.

    Yes, you can, with trigger Before Insert for Each row
    But be carefull, you can hit the mutating table problem...

  • Is it possible to set up a bootable external hard drive

    Is it possible to set up an external hard drive by copying my system folders, etc from my Ibook to my firewire drive??? If not is there a way to do it w./o the system DVD

    Hi matthew,
    first of all: WELCOME TO THE DISCUSSIONS!
    Yes, it is possible, but you need certain devices and software. You cannot create a bootable external device with drag&drop only.
    In order to get a bootable hard disk you have to buy a firewire disk (USB is not a bootable inteerface with MacOS X). Then you have to make a bootable clone from your internal hard disk to the external. You can use backup utilities such as Carbon Copy Cloner to achieve this.
    If this answered your question please consider granting some stars: Why reward points?

  • Is it possible to set default path and filename to the upload UI element  ?

    Hello All,
       Can some advise on if its possible to set a default path and filename to the upload ui element ? I will like to set a default path and filename to be uploaded to the upload UI. The user will then have the option of using that path or clicking on the browse to set another location.
      Any suggestions or advise ? Thank you very much.
    from
    Kwok Wei

    Hello VS,
      So to confirm, from your opinion, you feel that its not possible to have my upload UI elememt to be displyed on the screen with the path and filename preloaded ?
    Btw, do you have an email that I can reach you at ?
    from
    Kwok Wei

  • When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF?

    When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF? Currently when I have a Framemaker book that I want to save as a PDF, I choose Save Book As and then choose PDF for the file format. A dialog box comes up in which I can choose the Bookmarks tab and choose which tagged content I want to be made into bookmarks in the PDF file. What if I would rather have the filename of a document rather than the chapter title be a bookmark in the PDF? Is that possible? Where would I choose that option? Thanks!

    There are two ways that you could do this. You can either use postscript text frames and enter the correct pdfmark entries to show the file name with the corresponding actions (i.e. where to go in the PDF) or you can use hidden text in FM and the "Filename (Short) " variable in a unique paratag to be picked up by FM's bookmark creation.
    To go the pdfmark route, see http://www.pdflib.com/fileadmin/pdflib/pdf/pdfmark_primer.pdf for details and also consult the Adobe Pdfmark Reference manual (http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdfmark_reference.pdf).
    The hidden text route would use FM's Color Views to specify a colour as Invisible. This will make the content visually disappear from the screen (and any output), but FM will still be able to read the contents of any text that is coloured with the Invisible colour(s).
    1. Pick or create a colour that you want to be invisible. [Magenta is usually a good bet and stands out visually].
    2. Set that colour to be invisible in View 1 and visible in View 6. [you can use the shortcut <esc> v 1 and <esc> v 6 to toggle between the views.]
    3. Create a paratag to use for the filename and set the font colour to use the invisible colour.
    3. In the title of each chapter file, drop an anchored frame that is set to be outside of the text frame [so it won't interfere with any other content].
    4. In that AFrame, insert a text frame and use the invisible paratag defined in step 3.
    5. Insert the Filename (Short) variable in that text frame.
    6. Repeat steps for all files to be included in the bookmarks.
    When creating the PDF bookmarks, select only the paratag used for the invisible colour.
    Don't forget to toggle the View to be invisible (i.e. <esc> v 1  - this also works at the book level for all files in the book).

  • It should be possible to set default behavior for all file types

    It should be possible to set a default action for all file types. I'm so tired of having to manually sit and say "save this file" because Firefail always defaults to "open with" and has disabled the "Do this automatically for files like this from now on."
    And spare me the zealotry religious excuses for why its the fault of websites and not Firefail
    ''edited to remove swearing''

    I do want users to have full control to be able to set any folder view they want by using Apply to Folders; I just want to set the initial/default view to Detail because that matches what the majority of my users want.
    That is, what registry setting changes when I go to a picture folder, change the view to Detail, and click Apply to Folders? Having done that, I still retain the ability to change it to some other view and apply that to folders. But what registry setting
    represents the change I just made when applying Detail view to all Picture folders.?
    This settings is simple via GUI, but it is related a lot of registry keys, I made a test in my machine, capture the "Apply to Folders" process using Regshot tool (this is a small tool which can compare the regsitry changes after you change some
    settings), and this is the result:
    this is part of the registry changes, a plenty of registry keys and values need to be changed. hard to list them here. if you have interests, I recommend the tool Regshot, it can help you capture the regsitry changes.
    NOTE: Please Note: The third-party product discussed here is manufactured by a company that is
    independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's
    performance or reliability.
    Yolanda Zhu
    TechNet Community Support

  • Is it possible to set a song in my itunes library as a ringtone straight from my phone, without having to use my computer?

    Is it possible to set a song in my itunes library as a ringtone straight from my phone, without having to use my computer?

    Hi,
    According to your post, my understanding is that you want to make the Workflow Tasks work out with a pre-determined due date that it's 2 days from today in your client list workflow.
    I recommend that you can create this client list workflow as below in your environment.
    Then, you can go to “Start Options” to check “Start workflow automatically when an item is created”, publish this workflow and test if it works.
    When an new item is added in the client list, its corresponding Workflow Task is shown as below:
    Best Regards,
    Yumi Fu

Maybe you are looking for