Is it possible to set up my stat page to show thumbnails of selected or most frequently visited sites like in Opera?

Masses of information about new Firefox, but it all seems rather complicated and confusing. I would like to have a start page as I had in Opera, which shows thumbnails of my most frequently visited sites. I just need to know if this is POSSIBLE - if it is I'll make an effort to work out how to do it.
If you don't know what I'm tallking about look at the beginning of this video http://www.opera.com/browser/
I think Firefox is a better browser than Opera, but I like this feature of Opera and would like to have it on Firefox.
Thanks for any advice!
John

Similar Messages

Is it possible to set up my start page to show thumbnails of selected/bookmarked/most frequently visited sites like in Opera?

I want to be able to see a dozen or so thumbnails of sites I visit frequently so I can click on them and return to them more easily than typing in their addresses in the URL bar. Opera offers this feature. Is it possibe to set up Firefox (perhaps with a plug-in?) to emulate this? I'm new to Firefox and am intimidated by all the information about how to customise it - and how difficult it is to find what I want, but I'll carry on looking if someone can tell me its worth the effort.
I have in fact asked this question before but it's obviously not been entered into the database.

To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
Interesting question - thanks for that. Until now I didn't realise there was a difference.
The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
Many thanks,
Geoff

Can I set up a master page to show custom alternating footer text dependant on page number?

Hi,
Is it possible to set up a master page to show different messages in the footer of a brochure dependant on page number? For example;
...and so on, repeating until the end of the brochure. The intention is for the footers to update automatically if the pagination of the brochure in question needs moving around - or if the messages need changing.
Thanks!

Thanks, but the text needs to be on a single master page which every page is assigned to. This is so the text alternates correctly regardless of whether new pages are inserted or moved. If I assigned separate master pages to individual pages and then moved the pages to a different location, the alternating footer text would then fall out of sync. I hope that made sense!

How can I set up my mail page to show more than ten emails at a time?

How can I set up my mail page to show more than ten emails a time?
== This happened ==
Every time Firefox opened
== I first started using firefox

There doesn't seem to be a setting in preferences to how many emails I can view at one time.

Is it possible to set up a dual boot on a computer that came with Windows 7 ? Would like to add Vista .

Had to buy a new computer with windows 7. Found out later that one of my programs will only work with vista or later OS.
Is it possible to add Vista to my new computer?

CA
If your app will only work on vista OR LATER it should work in win 7 as win 7 is later. What is the app and what is the problem?
Wanikiya and Dyami--Team Zigzag

After login each morning on my work desktop, none of my frequently used sites like iGoogle, New York Times, my webmail are logged in. How can I change this. Browser is set to retain cookies.

I work on an office network. I log out every evening. The next morning after I have logged back in to the system and go to FireFox, I find that I have to log back in to iGoogle, MyYahoo, The New York Times even if I've checked "remember me," or "keep me logged in". Also, on the Weather Channel site, I enter a few cities I follow. Each day, I have to reenter them because they disappear. In FireFox, the browser is set to retain cookies. Anyone have an idea of what's going on. I don't seem to have this problem with IE.

I work on an office network. I log out every evening. The next morning after I have logged back in to the system and go to FireFox, I find that I have to log back in to iGoogle, MyYahoo, The New York Times even if I've checked "remember me," or "keep me logged in". Also, on the Weather Channel site, I enter a few cities I follow. Each day, I have to reenter them because they disappear. In FireFox, the browser is set to retain cookies. Anyone have an idea of what's going on. I don't seem to have this problem with IE.

How to set a New Tab as the start page in Firefox and lock in my choice of web sites

You may set the New Tab page Firefox shows when opening a new tab as its start page, and you can lock in the web sites you want displayed there.
I set my browser to open a New Tab as its start page and have locked in six destinations from which to choose on my start page.
First I open Firefox and open a new tab. Then I delete any open tabs other than this New Tab. Optionally, I can also set a second tab to open to a specific web site
Next I go to Tools and Options (or Edit and Preferences in Linux) and select the General tab on the far left. Click on
[Use Current Pages].
Each time I open Firefox it will open showing me the New Tab.
I can select from pages that I have already visited the six pages I want to have appearing on my New Tab every time. Supposing there are no pages locked in yet, and I don't want the site in the top left. I hit the X in its thumbnail's top right corner, it disappears and every other site thumbnail moves up and there is a new site appearing in the sixth slot. Note that if I have visited one page frequently, it may appear more than once, or be replaced by itself. If that happens, just keep deleting until the page you want shows up.
If I find a site that I want to save, then there is a thumbtack in the top left corner of the thumbnail. It is black, but if I click it it turns blue, and the thumbnail is a keeper.
This web site is in the second row, second over, but I want it to be up on the top row. Just drag and drop and the two sites exchange places. Make sure it has a blue thumbtack. The lock-down thumbtacks and delete X symbols appear in the top left and top right, respectively while the mouse is hovering over them.
It is possible to delete a saved site, and it is possible to undo the thumbtack. Simply click the X to delete or click the blue thumbtack to unlock the site and turn the thumbtack black.
You may choose to tack down a few sites and let the remainder float in and out, driven by your browsing history.
Through my use of this approach, I have instant access to my club's web site, two Webmail sites, and some other often-visited places on the Web, all in one start page.
About the only thing I really don't need there is a Google search box, for if I enter my search terms in the address bar I get the same result as if I had specifically typed in the search box.
Some add-ons, often potentially unwanted programs (PUPs), will replace the Firefox about:newtab (address of the New Tab) with eBay, Facebook, Twitter icons among others, and a different search engine. These icons may have a nicer appearance than the default Firefox New Tab, but you may also be looking at extra, unnecessary work for the computer, especially if behind the pretty icons there is a hidden agenda.
Personally, I would stay clear of these add-ons, and perform some scanning with an up-to-date antivirus and antimalware software.

If this is not a pinned (App) tab then the home page should open in that tab.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Problem setting up iDVD opening page after dragging in iMovie project

Had a problem at one to one training yesterday to finish my project. I had completed my slide show with photos and video in imovie. I had premade the "opening" on iDVD with a title and subtitle.
When we dragged the imovie file into the idvd opening page it brought in the title of the idvd name of that file. I typed in the name of the imovie show into that space. THen we typed in the title of project into "Revolution" space. At this point , the subtitle that i had previously put in would not work properly. AFter I gave up on the training and spent 4 more hours at home on this:
I could only set up the opening idvd page properly AFTER
publishing the movie..then dragging it into the idvd page...THen retyping in my subtitle info into
that space (which will start the video on TV) and typing the title into the "Revolution" Space. This was very time consuming as each time I made a change in the imovie project..then republishing it...EACH TIME I had to remake the idvd beginning page as I just said. SOOO....it is not possible to set up beginning idvd page first ????ANy suggestions here ????
THank you for any help.

That;s the wrong way to move stuff to iDVD. Apple really blew it on iDVD and iMovie 08.
Read this thread http://discussions.apple.com/thread.jspa?threadID=1520843&tstart=30

How to set Query SQL Statement parameter dynamically in Sender JDBCAdpter

Hi All,
I have one scenario in which we are using JDBC Sender Adapter.
Now in this case,we need to set Query SQL Statement with a SELECT statement based on some fields.
This SQL statement is not constant, it would need to be changed.
Means sometimes receiver will want to execute SQL statement with these fields and sometimes they will want to execute it with different fields.
We can create separate channels for each SQL statement but again that is not an optimum solution.
So ,I am looking out for a way to set these parameters dynamically or set SQL statement at Runtime.
Can you all please help me to get this?

Shweta ,
<i>Sometimes receiver will want to execute SQL statement dynamically</i>....
How you will get the query dynamically? Ok Let me assume, consider they are sending the query through file, then its definitely possible. But u need BPM and also not sender JDBC receiver adapter instead, receiver JDBC adapter.
SQL Query File ->BPM>Synchronous send [Fetch data from DB]--->Response -
>...............
Do u think the above design will suit's ur case!!!!
Best regards,
raj.

ThreadOpt values - is it possible to set them and what are the ranges?

Hi there,
I have a problem on my TestStand 4.2 platform, with test step result, formed and received from called external sequences results. In my Main sequence, in Post-Expression I defined condition, according to which the "Step.Result.Status" is passed or failed, and it works. But the problem is that in Status Expression field there is following statement: "(Step.Result.Status == "Done" && (Step.TS.SData.ThreadOpt == 0 || Step.TS.SData.ThreadOpt == 3)) ? "Passed" : Step.Result.Status". After deep search in the user manual, I found that (Note from "Expression Tab - Step Properties Dialog Box"): "Certain types of steps, such as Numeric Limit Tests, Multiple Numeric Limit Tests, String Value Tests, Pass/Fail Tests, and Statement steps, reserve one or more of these expressions to perform operations specific to the type of step or a substep performs the operation. In these cases, you cannot use the expressions the step type reserves, which appear dimmed on the tab."
Now, my problem is that at this specific step I call to an external sequence, which returns results and it is correct, but if these results, compared to expected are not the same, my step in the main sequence fails. Which is OK. But when the final report is generated I see there "Number of Tests Failed: 0", which is not OK. Since I can't change the "Step.Result.Status == Done", which comes from the external sequence, I thought that may be there is a place to change the "Step.TS.SData.ThreadOpt" and this way to cause to main sequence to correctly report "Failed Tests <> 0"???
Does anyone has an idea whether it is possible to set this the ThreadOpt value and what is the accepted range?
Your feedbacks and inputs are highly appreciated.
Stephan

GSinMN wrote:
Hello Doug,
I didn't think I was modifying any hidden properties. It's just configuring a sequence call step when you add it to the sequence. The "Execution Options" are clearly shown in a dropdown menu on the Module tab. I was just pointing out that this seems to be what sets the ThreadOpt variable.
GSinMN
Maybe I misunderstood. When you said "My normal process is to set it to 1, but based on this info, it needs to be either set to None or Use Remote Computer if you want anything other than "Done" to be returned." I thought you meant that you were setting the property directly rather than setting your sequence call steps to "New Thread" with the combobox.
-Doug

Setting the sql statement

http://www.egbolig.dk/drift_bo_syd.rpt (HERE IS THE REPORT)
We are using SAP Crystal Report .NET Runtime files (http://scn.sap.com/docs/DOC-7824 newest version 13.0.9.1312) in our web asp.net application. Everything have been working fine, but we have can into problems when showing the certain kinda reports.
In our code get the reports sql statement using getSQLStatement.
Dim gp As New GroupPath() Dim sql As String = report.ReportClientDocument.RowsetController.GetSQLStatement(gp)
This will get the sql, and we use this sql (getSqlStatement) and attach a sql WHERE clause from the code to only get a certain number of records.
The report Drift_bo_syd.rpt has 5 tables, and the following sql statement.
Database/Show Sql Statement
SELECT "rekvstam"."Sel", "rekvstam"."Afd", "rekvstam"."Levadresse", "rekvstam"."Rekvisition", "rekvstam"."Lejemaal", "rekvstam"."Lejer", "rekvstam"."Udfoertaf", "rekvstam"."Udfoertdato", "rekvstam"."Krit", "Selskab"."Adresse", "Selskab"."Postby", "Selskab"."Tlf", "Selskab"."Fax", "rekvstam"."Kontor", "rekvstam"."Hjemme", "rekvstam"."Rekvdato", "rekvstam"."Aftale", "rekvstam"."InitialRet", "rekvstam"."Arbejde", "kreditor"."Att", "rekvstam"."Konto", "Selskab"."Navn", "Selskab"."Email", "Interessentadresse"."Navn", "Interessentadresse"."Adresse", "Interessentadresse"."Postby", "Interessentadresse"."Email1", "Interessentadresse"."Telefon_Fax", "Interessentadresse"."Type", "Interessentadresse"."Tlf1", "rekvstam"."tlfLejer", "kreditor"."Kred", "Interessentadresse"."Interessentnr" FROM (("Rekvstam" "rekvstam" INNER JOIN "Selskab" "Selskab" ON "rekvstam"."Sel"="Selskab"."Sel") LEFT OUTER JOIN "Kreditor" "kreditor" ON "rekvstam"."Kred"="kreditor"."Kred") INNER JOIN "Interessentadresse" "Interessentadresse" ON "kreditor"."Interessentnr"="Interessentadresse"."Interessentnr" WHERE "Interessentadresse"."Type"='K'
But if we run the report from our asp.net code, we get the following error:
Cannot determine the queries necessary to get data for this report. Failed to retrieve data from the database. Error in File Drift_Bo_Syd {97FED382-1BAC-4DB1-970F-9E098ECE28F1}.rpt: Failed to retrieve data from the database.
After a long time searching for a solution, we found out that if we place the column kred from the kreditor table on the report, the report will work. (field explorer / database fields / kreditor (table) / kred (column)
Very important is that the field "kreditor.kred" is a primary key of the table kreditor, and also used in the linking.!
(We can get the report to work if we call the sql statement with the "kreditor"."kred" in the SELECT statement.
SELECT "kreditor"."kred", "rekvstam"."Sel", "rekvstam"."Afd", "rekvstam"."Levadresse", "rekvstam"."Rekvisition", "rekvstam"."Lejemaal", "rekvstam"."Lejer", "rekvstam"."Udfoertaf", "rekvstam"."Udfoertdato", "rekvstam"."Krit", "Selskab"."Adresse", "Selskab"."Postby", "Selskab"."Tlf", "Selskab"."Fax", "rekvstam"."Kontor", "rekvstam"."Hjemme", "rekvstam"."Rekvdato", "rekvstam"."Aftale", "rekvstam"."InitialRet", "rekvstam"."Arbejde", "kreditor"."Att", "rekvstam"."Konto", "Selskab"."Navn", "Selskab"."Email", "Interessentadresse"."Navn", "Interessentadresse"."Adresse", "Interessentadresse"."Postby", "Interessentadresse"."Email1", "Interessentadresse"."Telefon_Fax", "Interessentadresse"."Type", "Interessentadresse"."Tlf1", "rekvstam"."tlfLejer", "kreditor"."Kred", "Interessentadresse"."Interessentnr" FROM (("Rekvstam" "rekvstam" INNER JOIN "Selskab" "Selskab" ON "rekvstam"."Sel"="Selskab"."Sel") LEFT OUTER JOIN "Kreditor" "kreditor" ON "rekvstam"."Kred"="kreditor"."Kred") INNER JOIN "Interessentadresse" "Interessentadresse" ON "kreditor"."Interessentnr"="Interessentadresse"."Interessentnr" WHERE "Interessentadresse"."Type"='K'
But it should not be necessary to include this field (which is the primary key and used in linking the report) in the sql statement,
BECAUSE it is not used in the report. So maybe this is a bug?
It has not been necessary in RDC Crystal Report or RAS Crystal Report in a classic asp envoriment.
Here is the code we use to set the reports SQL Statement)
Try
Dim conn As New SqlConnection(connString)
conn.Open()
Dim sd As New SqlDataAdapter(New SqlCommand(nySQL, conn))
Dim ds As New Data.DataSet()
Dim navn As String = report.Database.Tables.Item(0).Name
sd.Fill(ds, navn)
report.SetDataSource(ds)
conn.Close()
Catch ex As Exception
Throw
End Try

Hi Jan
I understand your problem completely but we have asked R&D to be able to edit the SQL and they explained due to how the report Engine works it's simply not possible anymore. It would take a complete rewrite in all of our DB drivers and query dll's to be able to allow it. They did that in CR 9 when they rewrote the DB drivers and removed the SQL part of the code into separate dll's and that is when the ability was removed, it's been that way ever since.
One possibility is to get the SQL from the Report and then connect to your DB using a .NET and if the results from the SQL is less than 5K rows and not too many columns you could then set the Report data source to a Dataset.
As long as all of the field names are the same CR will run the report using this work flow.
For data larger than 5K rows, limit is due to memory resources, you could save the DS to an XML file and then set the reports data source to the XML file. We've seen 100meg XML's used so the amount of data should not be a problem, but of course there are limits to everything so test...
This should not affect performance much.
So the work flow would be:
Load the report
Get the SQL Statement
Paste it into a Dataset Query
Something like this should get you started:
//string connString = "Provider=SQLOLEDB;Data Source=MySQLServer;Database=xtreme;User ID=sa;Password=pw";
string connString = "Provider=SQLNCLI10;Server=MySQLServer;Database=xtreme;User ID=sa;Password=pw";
Detail"".""Quantity"" FROM   ""xtreme"".""dbo"".""Orders Detail"" ""Orders Detail""";
string sqlString = @"SELECT top 10* FROM ""xtreme"".""dbo"".""Financials"" ""Financials""";
System.Data.OleDb.OleDbConnection oleConn = new System.Data.OleDb.OleDbConnection(connString);
System.Data.OleDb.OleDbCommand cmd = oleConn.CreateCommand();
cmd.CommandText = sqlString;
System.Data.DataSet ds = new System.Data.DataSet();
OleDbDataAdapter oleAdapter = new OleDbDataAdapter(sqlString, oleConn);
//OleDbDataAdapter oleAdapter2 = new OleDbDataAdapter(sqlString2, oleConn);
DataTable dt1 = new DataTable("Financials");
//DataTable dt2 = new DataTable("Orders Detail");
oleAdapter.Fill(dt1);
//oleAdapter2.Fill(dt2);
ds.Tables.Add(dt1);
//ds.Tables.Add(dt2);
ds.WriteXml("c:\\reports\\sc2.xml", XmlWriteMode.WriteSchema);
// as long as the field names match exactly Cr has no problems setting report to a DS.
try
    rpt.SetDataSource(ds.Tables[0]); // incremtent [0] for more than 1 table.
    rpt.SetDataSource(ds);
catch (Exception ex)
    MessageBox.Show("ERROR: Schema Mismatch. Error reported by CR: " + ex.Message);
//Now check for subreport and set to same DS
foreach (CrystalDecisions.CrystalReports.Engine.Section section in rpt.ReportDefinition.Sections)
    foreach (CrystalDecisions.CrystalReports.Engine.ReportObject reportObject in section.ReportObjects)
        if (reportObject.Kind == ReportObjectKind.SubreportObject)
            CrystalDecisions.CrystalReports.Engine.SubreportObject subReport = (CrystalDecisions.CrystalReports.Engine.SubreportObject)reportObject;
            CrystalDecisions.CrystalReports.Engine.ReportDocument subDocument = subReport.OpenSubreport(subReport.SubreportName);
            subDocument.SetDataSource(ds);
And for XML it would use this part, not above I am saving the data and structure in the XML file so it should match what is in the report:
foreach (CrystalDecisions.CrystalReports.Engine.Table rptTable in rpt.Database.Tables)
    try
        rptTable.Location = btrDataFile.ToString(); // @"D:\Atest\" + rptTable.Location + ".xml";
    catch (Exception ex)
        MessageBox.Show("ERROR: " + ex.Message);
Only issue you may run into is sometimes XML does not have a direct field type and your original data source but you'll get an error if that happens which could be trapped and handled.
If you have a report that only uses 2 tables I do have code that will convert it to use a Command Object. That is the limit the engine is capable of, there is a lot of logic to be able to do this in CRD and the SDK so that is all we could get for now.
I hope that helps
Don

Is it possible to set the stateof a command button

I want to call a function when the user presses a command button (left click), then wait until he releases the mouse button, then call a second function.
Here is the code for EVENT_LEFT_CLICK:
CallFunction_1(...)
GetRelativeMouseState(panel, control, 0, 0, &mouseLButton, 0, 0);
while(mouseLButton)
ProcessSystemEvents();
ProcessDrawEvents ();
GetRelativeMouseState(panel, control, 0, 0, &mouseLButton, 0, 0);
CallFunction_2(...)
My Problem is, that the button does not chage its state to "pressed", so it appears to the user that he has not clicked on it.
Is there any possibility to set the command button th the pressed state?

The reason for this is that the LEFT_CLICK event has not been processed yet. We allow you to "swallow" any event to basically eliminate the built in effect of that event. In your case you want the normal effect of the LEFT_CLICK event to occur (button appears pressed on the panel), but you also want to launch a loop to check when the mouse has been released. This is easily done through posting a deferred call. A deferred call allows the current event to be completed and then calls the deferred callback after that. So your code would be changed to:
In LEFT_CLICK,
CallFunction_1(...)
PostDeferredCall (funcName, (void*)control);
Then write a function "funcName" with prototype:
void CVICALLBACK funcName (void *callbackData);
and code:
void CVICALLBACK fu
ncName (void *callbackData)
int control = (int)callbackData;
int mouseLButton = 0;
GetRelativeMouseState (panel, control, 0, 0,
&mouseLButton, 0, 0);
while(mouseLButton)
ProcessSystemEvents();
ProcessDrawEvents ();
GetRelativeMouseState (panel, control, 0, 0,
&mouseLButton, 0, 0);
CallFunction_2(...)
This should solve your problem.
Best Regards,
Chris Matthews
Measurement Studio Support Manager

Is there any System setting for Update statement

Is there any setting for update statement related to implicit commit because Update statement in my code behaves differently in different systems.
My code is
Data: it_eaus like eaus occurs 0 with header line,
        wa_eaus type eaus.
select * from eaus into table it_eaus where auszbeleg = '000000000001' and storausz = 'X'.
if sy-subrc = 0 .
wa_eaus-aedat = ''.
wa_eaus-aenam = ''.
wa_eaus-storausz = ''.
modify it_eaus from wa_eaus transporting aedat aenam storausz where auszbeleg = '000000000001'.
update eaus from table it_eaus.
endif.
Data: it_eausv like eausv occurs 0 with header line,
        wa_eausv type eausv.
select * from eausv into table it_eausv where auszbeleg = '000000000001' and storausz = 'X'.
if sy-subrc = 0 .
wa_eausv-aedat = ''.
wa_eausv-aenam = ''.
wa_eausv-storausz = ''.
modify it_eausv from wa_eausv transporting aedat aenam storausz where auszbeleg = '000000000001'.
update eausv from table it_eausv.
endif.

Hi
It isn't an alternative way: u can only explicit the COMMIT just as I said before:
Update DBTAB set COL.
COMMIT WORK.
Anyway just I said before the debugger can execute a COMMIT, from SAP help:
The New Debugger can run in exclusive and non-exclusive mode. Exclusive mode means that the application that is being analyzed exclusively occupies a work process of the application server during debugging. In non-exclusive mode, the Debugger functions are limited. In non-exclusive mode, after each Debugger interaction, the system requests a roll-out in the application. Therefore, an implicit database commit must be executed. This has the following consequences:
u25CF      Debugging is not possible between the statements SELECTand ENDSELECTbecause the database cursor needs to be closed when using an implicit database COMMIT statement.
In this case, program execution is terminated.
·        Debugging is not possible for conversion or field exits.
·        Due to the implicit database commit, inconsistent datasets can occur in the database.
For this reason, non-exclusive mode is not possible in productive systems.
Max

API to set the Message State

Hi,
is it possible to set the PI Message State to Application Error in Message Mapping or/and in Adapter Modul ?
best regards,
Hai

Hi,
in case you want to get the whole soap fault message (do not use soap evelope) and handel it youself. You may want to set it to application fault and forward the fault message to caller.
regards,
Hai

Setting Rollforward Pending State manually

Hello everyone,
is it possible to set a database into rollforward state manually after using the command rollforward stop?
Thanks in advance
Marco

Hi Sameer,
I am facing similar issue in which I have reset my rollforrwarding status with dbrfopen and it shows rollforwarding status to database
Database is consistent                                  = NO
Rollforward pending                                     = DATABASE
Restore pending                                         = NO
But after doing this too I am not able to apply the logs as
db2 rollforward database SSP query status
                                 Rollforward Status
Input database alias                   = SSP
Number of nodes have returned status   = 1
Node number                            = 0
Rollforward status                     = DB working
Next log file to be read               = S0025574.LOG
Log files processed                    = -
Last committed transaction             = 2013-08-15-01.52.02.000000 UTC
No details related to this found in show detail:
db2ssp 4> db2 list utilities show detail
SQL1611W No data was returned by Database System Monitor. SQLSTATE=00000
Please advice how I can roll forward my logs
Regards,
Nikhil Goyal

Is it possible to set up my stat page to show thumbnails of selected or most frequently visited sites like in Opera?

Similar Messages

Maybe you are looking for