Is it possible to set value like commande idente in the metadata?

Hi,
I try to set dynamique values in métadata.
in the log they are set but when i try to see properties from the doc, they don't
is some one have try to do this.
did i forgot some thing?
thx.

you cannot manipulate the spool or spool form print. you have to get the file and then manipulate its metadata.
by the way: I don´t understand why do you need to manipulate spool form metadata? if you need to do this because you want to save the form for example, then save it directly, without the spool.
elaborate on the reasons if you want some more suggestions but I am afraid you want something that is not possible, or maybe my limited knowledge does not let me help you,
Otto

Similar Messages

  • Is it possible to set a default music player for the music on my external hard drive while still keeping my iTunes the default player on my Mac ?

    Is it possible to set a default music player for the music on my external while still keeping my iTunes the default player on my Mac ?
    Message was edited by: Pellseidon

    There is no setting in the iPhone to set another default music player. The default is Music. If you are using another application, you are at the mercy of how that application operates as far as what occurs when it stops or errors out. The car is looking for music to play.

  • When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF?

    When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF? Currently when I have a Framemaker book that I want to save as a PDF, I choose Save Book As and then choose PDF for the file format. A dialog box comes up in which I can choose the Bookmarks tab and choose which tagged content I want to be made into bookmarks in the PDF file. What if I would rather have the filename of a document rather than the chapter title be a bookmark in the PDF? Is that possible? Where would I choose that option? Thanks!

    There are two ways that you could do this. You can either use postscript text frames and enter the correct pdfmark entries to show the file name with the corresponding actions (i.e. where to go in the PDF) or you can use hidden text in FM and the "Filename (Short) " variable in a unique paratag to be picked up by FM's bookmark creation.
    To go the pdfmark route, see http://www.pdflib.com/fileadmin/pdflib/pdf/pdfmark_primer.pdf for details and also consult the Adobe Pdfmark Reference manual (http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdfmark_reference.pdf).
    The hidden text route would use FM's Color Views to specify a colour as Invisible. This will make the content visually disappear from the screen (and any output), but FM will still be able to read the contents of any text that is coloured with the Invisible colour(s).
    1. Pick or create a colour that you want to be invisible. [Magenta is usually a good bet and stands out visually].
    2. Set that colour to be invisible in View 1 and visible in View 6. [you can use the shortcut <esc> v 1 and <esc> v 6 to toggle between the views.]
    3. Create a paratag to use for the filename and set the font colour to use the invisible colour.
    3. In the title of each chapter file, drop an anchored frame that is set to be outside of the text frame [so it won't interfere with any other content].
    4. In that AFrame, insert a text frame and use the invisible paratag defined in step 3.
    5. Insert the Filename (Short) variable in that text frame.
    6. Repeat steps for all files to be included in the bookmarks.
    When creating the PDF bookmarks, select only the paratag used for the invisible colour.
    Don't forget to toggle the View to be invisible (i.e. <esc> v 1  - this also works at the book level for all files in the book).

  • Is it possible to set up a computer that uses the Sprint...

    Is it possible to set up a computer that uses the Sprint Pantech PX-500 (Mobile Broadband Card) to share its connection via Wi-fi? How would I set this up on a WRT54G?
    Thanks so much!
    -B

    If you haven't got the router then get WRT54G3G. If you already have a router then use it as a switch/access point, and use windows internet connection sharing or proxy server to share internet.

  • Is it possible to set default path and filename to the upload UI element  ?

    Hello All,
       Can some advise on if its possible to set a default path and filename to the upload ui element ? I will like to set a default path and filename to be uploaded to the upload UI. The user will then have the option of using that path or clicking on the browse to set another location.
      Any suggestions or advise ? Thank you very much.
    from
    Kwok Wei

    Hello VS,
      So to confirm, from your opinion, you feel that its not possible to have my upload UI elememt to be displyed on the screen with the path and filename preloaded ?
    Btw, do you have an email that I can reach you at ?
    from
    Kwok Wei

  • Is it possible to set a default media player for the iPhone?

    I have a music subscription with another company, therefore all my music is played through their app. When I plug my phone into my car to play music, it always opens iTunes and alerts me there is no music there so I have to open the app and select the music. Which is fine, but when the app stops (for whatever reason), the iTunes (which I'm not sure why they don't call iMusic or something equally silly) tries to play any music I have in iTunes. Is there any way to stop this madness? Thanks!

    There is no setting in the iPhone to set another default music player. The default is Music. If you are using another application, you are at the mercy of how that application operates as far as what occurs when it stops or errors out. The car is looking for music to play.

  • Is it possible to set up a Paragraph Style leaving the Font Style field blank?

    We often have to import text into InDesign from Word docs. We place the docs (Command-D, rather than copying and pasting) in order to preserve italics, bold text, etc. As it is now, we have to select all the text and set each element separately - leaving the Font Style field blank - in the Character Palette.
    It would save a lot of time, if we could set up a Paragraph Style without specifying the Font Style, (leaving it blank), which overrides the formatting we are trying to preserve. Is this possible?

    The answer is "kind of". You can create the Paragraph Style you want to apply and select the paragraphs you want to apply it to - then right-click on the Paragraph Style and choose 'Apply "Body". Clear Character Styles.'
    It is possible to do this as a Character Style if you click outside of a text area and create a new style. I do it all of the time as I import lots of Word documents to write to ePub (you have to define all of the styles to ensure the document looks right). Since the documents come in with small caps, bold, italics, different font sizes but the same font throughout.
    So I have a style based on None with blank Font Size and Font Style which I apply to the whole document. If there is anything in these boxes you can just erase it by backspacing over the text.

  • Validate and set values of other attribute from the db or from the pl/sql

    Hi,
    I am working a validation of SSN field. I got around validating the entity attribute (SSN)(http://radio.weblogs.com/0118231/stories/2003/01/17/usingViewObjectsInEntityObjectsForAnEfficientExistenceCheck.html).
    Is it first of all possible to validation against a vo and set the values of other CoreInputexts ?
    Where should I call the method exists (http://radio.weblogs.com/0118231/stories/2003/01/17/usingViewObjectsInEntityObjectsForAnEfficientExistenceCheck.html)method to set the values of other field.
    I am so confused.
    Please shed some light!
    Thanks

    Hi,
    I am working a validation of SSN field. I got around validating the entity attribute (SSN)(http://radio.weblogs.com/0118231/stories/2003/01/17/usingViewObjectsInEntityObjectsForAnEfficientExistenceCheck.html).
    Is it first of all possible to validation against a vo and set the values of other CoreInputexts ?
    Where should I call the method exists (http://radio.weblogs.com/0118231/stories/2003/01/17/usingViewObjectsInEntityObjectsForAnEfficientExistenceCheck.html)method to set the values of other field.
    I am so confused.
    Please shed some light!
    Thanks

  • Mapping in BPM - set value of collection item

    Hello,
    is it possible to set value to exact item of collection in mapping step in netweaver BPM?
    I need something like set(<collection_variable>,<item_index>,<item_value>)  - so exact opposite of GET generic function, which gets specific item from collection.
    Is it possible in NW BPM?

    You dont have to apologize. I didnt meant that as offend.
    I appreciate the possibility to discuss that topic with somebody, because discussion itself sometimes shows other perspective to the problem, which can lead to solution
    Of course I wrote EJB function to solve that - but I cant believe that it isnt standard solution to that pretty common use case.
    I think, that problem lays in very limited implementation of XPath into Netweaver BPM. I will bet my left hand, that in some future SP of BPM will SAP introduce something like this:
    myCollection[1]/notificationId = notificationId
    which is standard XPath way to do that

  • Setting value in cookie using ABAP code

    Hai All,
    Is it possible to set value in a cookie using ABAP code.
    Regards,
    H.K.Hayath Basha.

    Hai Thomas Jung,
    In Enterprise portal SAP has standard functionality to set inactivity timeout. We can set whatever time we want, say for example if we set the time as 15 minutes. If the user is not interacting with the system for 15 minutes then portal will logout the user automatically without any information.
    Our user wants a popup to be shown that the system will be logged out due to inactivity.
    Since Portal logout the user automatically without any information. I want to put in my own framework to handle inactivity timeout.
    What idea I have is, when ever user interacts with any function in portal. I will set current time in a cookie. Someother application will read this cookie at regular interval, if the time difference between the cookie and system is 15, then I will force the user to logout by showing a popup screen.
    In our portal we have three different type of application, they are, Java Webdynpro, ABAP-Webdynpro and BSP.
    I think that from Java Webdynpro and BSP we can call a javascript to set value in a cookie, from ABAP-Webdynpro I don't know how to set a value in cookie.
    This is my business requirement. Is there anyother solution to fullfill this business requirement.
    Thanks & Regards,
    H.K.Hayath Basha.
    Let me tell the business requirement.  Our user want to give a popup message when

  • Using HttpHeader to set value for session variables

    Hi,
    We want to set values for 2 session variables (USER and ROLEID) using HttpHeader in obiee 11g. Has anyone tried this? How can we achieve this?
    I found the below note on the forum for setting value for the USER session variable. how can we set the ROLEID session variable also? is it possible to set values for 2 variables?
    for setting the USER session variable,
    You should add this in $BI_HOME/bifoundation/web/display/authenticationschemas.xml:
    <SchemaKeyVariable source="httpHeader" nameInSource="Proxy-Remote-User" forceValue="SSO"/>
    <AuthenticationSchema name="SSO" displayName="Single Sign On" userID="IMPERSONATE" proxyUserID="NQ_SESSION.RUNAS" options="noLogoffUI noLogonUI">
    <RequestVariable source="httpHeader" type="auth" nameInSource="Proxy-Remote-User" biVariableName="IMPERSONATE" options="required"/>
    </AuthenticationSchema>
    Please suggest.
    Thanks.

    I think maybe your SnmpValue type or value is not corrent.
    1.3.6.1.4.1.7064.201.1.200.100.0 is Enum control type
    when I use
    SnmpValue val = new SnmpString("0");
    It doesn't work, but when I use
    SnmpValue val = new SnmpInt(0);
    It works. I think the JDMK should give some warning message when the type is not correct. :)
    The code is following:
    final SnmpVarBindList setList = new SnmpVarBindList(" set varbind list ");
    SnmpOid oid = new SnmpOid("1.3.6.1.4.1.7064.201.1.200.100.0");
    SnmpValue val = new SnmpInt(0);
    SnmpVarBind valueBind = new SnmpVarBind(oid, val);
    setList.addVarBind( valueBind );
    SnmpRequest setRequest = session.snmpSetRequest(null, setList);

  • Is it possible to set identity template dynamically?

    Hi,
    I want to create accounts on LDAP through activesync.
    I set identity template :[uid=$accountId$,ou=$category$,dc=....].
    But I don't want to set category attribute in schema map of resource.
    Is it possible to set $category$ attribute dynamically
    depends on the value of other attribute without defining schema map??
    thanks in advance.

    Hi,
    Absolutely possible, you could either create a field called global.category in your activeSync form or the way I'd do it which is to set the .identity field. In your activeSync form when you assign the LDAP resource to the user view you can a have a field called 'accounts[LDAP].identity' and then use an expansion event within this field to build your DN of the user account on LDAP.
    HTH,
    Paul

  • Set Value in a ME22N's field with user exit.

    Every time an PO is create in ME21N or ME22N I need that the user to input some valid Requisitioner in PO's item. These valid Requisitioners are in a Z table.
      Well, to solve this I've used the EXIT_SAPMM06E_017 exit. I call the function F4IF_INT_TABLE_VALUE_REQUEST but it is not bringing the requisitioner I've selected to the field in ME22N the field remains empty.
    data : i_usr   like zmmwfnfusr occurs 0 with header line,
           wa_usr  like DDSHRETVAL occurs 0 with header line.
    IF i_ekpo-afnam IS INITIAL. "The field resquisitioner
      MESSAGE s079(z1) WITH 'Requerente obrigatório para Workflow'
                             'Receb. de NFs.'
                      'Digite um Setor Recebedor cadastrado!'.
    v_repid = sy-repid.
    v_dynnr = sy-dynnr.
       select *                  "My table with requisitioners
       from zmmwfnfusr
       into table i_usr.
       CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
        retfield            = 'RECEBEDOR'     "Field name of zmmwfnfusr
        DYNPPROG            = v_repid
        DYNPNR              = v_dynnr
        DYNPROFIELD         = 'TEKPO-AFNAM'    "Tried to guess 
    the field name, tried all namens..
        VALUE_ORG            = 'S'
       TABLES   
         value_tab                 = i_usr
         return_tab                = wa_usr.

    Hi,
    try with this
    process on value-request.
      field AFANAM module onvalue_request_afanam.
    and check what is the field name in the screen which you want to populate the value like (materail) Material is the Dynpro field and MATNR is the retfield
    in the module
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
          retfield        = 'LIFNR' <data element for afanam>
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          dynprofield     = 'AFANAM'
          value_org       = 'S'
        tables
         value_tab       = itab
        return_tab = ret_tab
        FIELD_TAB  = FIELD_TAB
        exceptions
          parameter_error = 1
          no_values_found = 2
          others          = 3.
    this should work,
    Cheers,
    Sasi

  • 'set port description' command in CatOS 8.4

    We've upgraded to CatOS 8.4 to get ssh few month ago. I haven't noticed until now that there is a 'set port description' command. It still has 'set port name' command to name the ports, but not sure what 'set port description' command does. Looked for the command in the Cisco reference guide and the command is missing from the list.
    For one, it doesn't change the port name as 'set port name' does. I suspect it could supply port information for snmp polls. Anyone know what this command is for?

    Hmmm, interesting.
    I looked it up in the command lookup tool and nothing comes back.
    Found a reference to it here which to me says its the same as the "set port name" command but as you say it doesn't work!
    http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a0080094713.shtml
    Rgds
    PJD

  • Is it possible to parse values from a sms to a jar?

    Hi,
    I am currently developing a mobile math game and was wondering if it is possible to parse values from a sms to the game?
    I want to use it so that if a teacher sends an sms with math problems the game will be able to load these values.
    Can anyone please help me in this regard, and instruct me how I would go about doing it?
    Thank you. :-)

    HI,
    create a internal with type of the structure and populate values into that n do wat ever u want.
    ex:
    data: itab type zstruct occurs 0 with header line. // where zstruct is a structure in a database.
    select * from .............. into table itab where ...............
    loop at itab.
    write:/10 itab-fld1,
              20    itab-fld2,
    endloop.
    if helpful reward some points.
    with regards,
    suresh aluri.

Maybe you are looking for