Is it possible to set video keyframe "line" from Opacity to Time Remapping as default?

I almost never use opacity effect, but i use Time Remapping very often. Is it possible to set Time Remapping as default effect handler for clips?
Another idea is when you select a clip and want to change it's position or scale you have to expand a "Motion" submenu in Effects panel. Is it possible to have motion expanded by default?

No to both.

Similar Messages

  • Is it possible to transfer video to iMovie from video app (not the library)

    Is it possible to transfer video to iMovie from video app (not the library)
    IPAD-IOS

    If you're asking if you can import video fror the iOS Videos app to iOS iMovie, the answer is no. You can only import what is in the camera roll.

  • Is it possible to transfer videos or movies from sony laptop to  iphone 5s

    is it possible to transfer videos or movies from sony laptop to  iphone 5s

    Import them into an iTunes library, converting them to MPEG-4 if needed, and then sync the iPhone with that library.
    (115377)

  • Is it possible to set a tune purchased from iTunes as a ringtone.

    Is it possible to set a tune purchased from iTunes as a ringtone on an iPhone 4S?

    You can create a ringone from most songs, then sync them to your iphone and use them.
    Google will find several ways to do this.

  • Audio and Video are out of sync after time remaping.

    After I did the time remap,audio and video are completely out of sync.
    I don't know what I did wrong.Please HELP.
    I did a short video(43seg) to explain myself better
    http://www.youtube.com/watch?v=X0PQEoZvGbk

    ha. having the video is killer. there are a couple ways to do this. i'd recommend using the blade tool (tap b twice to get the one that cuts all tracks), make a cut through the audio and the video at the points where you want it sped up, then right click the clip itself (which should be linked with audio and video) and then just set it to whatever speed you want. it'll have the same effect. you might have to adjust boundaries or you can select ripple.
    alternatively, it looks like you just needed to do the same thing to the audio that you did to the video in that clip you uploaded. you can always relink things by selecting the audio and video and hitting cmnd+L.
    hope that helps.

  • Is it possible to make video play smoothly from a flash drive?

    I know it's generally taboo to do just that. This is a special circumstance.
    I want to know if there's a way to either format the drive, or export the video (or a combination of the two) in such a way that video stored on the drive can play smoothly without having to download the content at all?

    Provide the name of the program you are using so a Moderator may move this message to the correct program forum
    This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

  • Loading video to website from apple Quick Time Streaming Servers (QTSS)

    Is anyone currently doing this? What advantage does it have for videos on websites?
    Thanks

    If you're talking about just using the DVD as a storage medium to be played on a computer thru QuickTime Player, the drawback I see is the bitrate or bandwidth requirement staying within the ability of the DVD drive to spin it out. Other than that, does a CD have enough storage for the size of your file? Reading off a CD is generally faster.
    As to a website, a .mov file will play properly, A .mp4 doesn't always invoke the Quicktime player...
    Or am I misunderstanding you?
    Patrick

  • How can I set the reference line in a graph

    Hello together,
    I would like know if it is possible to set the Reference Line Value as a variable
    Example:
    "<ReferenceLine index="0" visible="true" value=variable sql-statement displayedInLegend="true"/>"
    My problem:
    I need a combined graph with a stacked area and a line for the Limit or "Reference Line".
    regards

    Sorry. I don't mean page tabs, but the order in which form fields are selected by the tab key. In simple html there is a value called tabindex and I was just wondering if there is a way to assign this order within a portal form. I have basically recreated the form with a custom layout and adjusted the table structure to force the order I was looking for, but it would be a nice add for future versions.

  • Setting video resolution

    Hi everybody.
    I have an ipod touch 4th generation, 64 GB
    I wanna know if it's possible to set video resolution of camera. If so, how I can do. If not, what's the default resolution?
    Thank you in advance
    Have a nice day

    You can't change the video resolution.  The resolution is 720P

  • Execute command lines from Xcelsius 2008

    Hello,
    Is there any possible way to execute command lines from Xcelsius 2008 swf?
    Thank you.

    Hi,
    You cannot call out to command-line from a Flash SWF, it is sandboxed so does not know how to do any of that.
    One (complicated) option would be to write your own app to embed the SWF into, a real app can then call out to do whatever you want, then you just have to get the SWF to communicate with your app using External Interface, it would be a lot of work.
    Regards
    Matt

  • Can you set up family sharing from a mac air instead of an iphone

    I am interested in sharing an ibook with my wife who has an iphone. I have a Mac Air but don't have an iphone. Is it possible to set up family sharing from my Mac Air with my Apple ID as the primary?

    Yes, it is, assuming your Mac is running Yosemite: Start or join a family group using Family Sharing - Apple Support

  • Is it possible to set BIOS settings over a command line?

    Hi,
    is there a possibility to set Toshiba BIOS settings over a command line tool?
    We have hundreds of Toshiba Notebooks and would like to activate Wake On Lan.
    I know there is hwsetup, but as far as I know this GUI doesn't accept parameters...
    We would like to propagate new settings over a script.
    Any solution for this ?
    Thanx

    > is there a possibility to set Toshiba BIOS settings over a command line tool?
    Something like that is not known to me and I doubt this could be possible.
    As you said there is an preinstalled Toshiba HWSetup tool which can be used to change some certain BIOS settings. But this is only one way to change the BIOS settings from the Windows OS.

  • Is it possible to set up my iPad as a video camera and broadcast it real time to a TV via apple TV?

    Is it possible to sey up my iPad as a video camera and broadcast it real time to a TV via Apple TV?

    Use airplay to send what is on the iPad to your tv.
    Since ipad2, you can display exactly what is on the ipad screento a tv via an adaper or via airplay through an apple TV.
    http://support.apple.com/kb/ht5209
    http://support.apple.com/kb/ht4437
    General overview but lacks specifics.
    http://accelerateyourmarketing.com/home-video-studio/
    Video
    https://www.youtube.com/watch?v=ce5FVJi0Uxw

  • Setting multiple keyframes at one time . . . Possible???

    Was working on a project the other night and the "producer" had brought in several clips consisting of multiple shots each with dissolves already in them. He was adamant that the shots stay "as is" so color correcting across them was a pain having to keyframe color corrections for each shot thru the transitions with the 3 way cc. I got it done but it was a hassle having to set all 20 something parameters and then having to do it all over again 30 frames later over and over again for something that was basically glorified b-roll clips. (The good news is that it worked very nicely.)
    So the question is . . . Is there a way to set keyframes for multiple parameters all at once? I know that there is a way to clear all the set keyframes at one time and find it hard to believe the wizkids at apple didn't think that an editor might want to set them all at one time.
    Thanks
    Eric

    I'm not sure how that would get around the problem I encountered the other night when i needed the settings to change over time several times within one clip. Even if I had set the keyframes in the viewer I would still have had to hit each one of the 20+ individual parameters and that's what I was hoping I could get around doing
    I mean they put in a "clear all" button but didn't think to put in a "set all" button . . . sometimes I miss my Avid lol.
    Thanks anyway
    E

  • Keyframe spacing tweak in Time remap possible?

    I do a lot of time remap keyframe tweaking in AE, so i tend to zoom in all the way into the timeline.
    Is there a way to reduce the spacing in between the frames? Then i'll be able to display more frames onscreen. Thanks!

    I'm not sure what you're asking here. You can see more frames in the timeline by simply clicking on the left most icon at the bottom left of the time line zoom controller. A single click will show you twice the frames in your time line, The next click will show you five times the number of frames, the next will show you 10.  If you want to see more frame numbers displayed at the top of the timeline, then the answer is no. The frame numbering will go from every frame to every other frame, to every five frames.
    1   2   3   4
    to
    2  4  6  8
    to
    5  10  15  20
    and so on.
    If you want to have more frames in a second  then you can re-set the frame rate of your composition all the way up to 99 frames per second. This will not change the length of a movie in seconds in your timeline, but you'll be able to set keyframes to a higher degree of accuracy in time. In other words, if the video in the timeline is 10 seconds long when your comp is 24 fps it will still be 10 seconds long when the comp is 99 fps but you'll be able to set a keyframe at 1 second and another keyframe at 1.0101010 seconds instead of one at 1 second and the next one at 1..04166 seconds. Just make sure to change the frame rate back to your desired playback frame rate before you render.

Maybe you are looking for