Is it possible to setup for 2G calls and 3G data?

Hi all
Is it possible to setup my iPhone 3G for the following:
- 2G primary mode for calls as 2G coverage is usually better for calls.
- 3G on a adhoc basis for data on a need to basis.
Looking through the settings page, there is only one selection for 2G or 3G. If 3G is selected, calls and data will be 3G only.

You can manually turn 3G off so that the phone is in Edge mode all the time and then turn 3G on when you surf. There is no automated way to accomplish this, although many have requested this would be a great feature. Personally, I get great battery life leaving my phone on 3G, so I no longer manually toggle between the 2. 2.0.1 and 2.0.2 have been good for me.

Similar Messages

Sound Notifications for Missed Calls and Text Messages

Aside from the very small green light in the upper right corner (Bionic) - is there a way to get audio notifications for missed calls and texts? I'm missing a lot of calls and texts because I'm not checking the screen constantly. Thanks!

I am not sure about the Bionic phone specifically but I am pretty sure there should be notification sounds.
My phone, the Droid 2 global has ringtons, and notification sounds separately.
Have you tried looking in the sound settings?

My phone displays numbers instead of contact names for incoming calls and text - how do I fix?

My phone displays numbers instead of contact names for incoming calls and text - how do I fix? It used to display the names if there was a contact listed, now it just shows numbers regardless of whether or not the number corresponds to a contact name in the contact list. Can anyone help? I googled this problem and lots of folks have experienced it, however there is not a consensus for a resolution.

Alexandribill, I have been having the exact same issue. I got a new phone and restored my contacts. If the # doesn't have the area code first then the name isn't shown. I just added my husbands area code to my phone and called my phone from his and now his name shows up...Ugh, I have to go through and manually add the area code to all my contacts....
I'd say Verizon needs to rewrite their program to include the area code in the restoring from backup process!

How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?, How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?

How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?, How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?

How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?, How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?

Can I use iphone in BMW via usb interface for phone call and ipod functions

Can I use iphone in BMW via usb interface for phone call and ipod functions

Why don't you check the manual for your car or ask your dealer?

Document Types Setup for Expense Approval and Payable Invoice

Hi,
Can anyone please suggest Document Types Setup for 'Expense Approval' and 'Invoice Approval' and its tables related to the same. Table storing its document_type_code and wf_approval_itemtype as we have for PO_DOCUMENT_TYPES_ALL table for Purchase Order.
Thank You.
Regards,
Meghana

Hi
It could be because of main memory problem... so Restrict your selections and do the statistical setup
by the way how many comp codes you have? restrict with comp codes or doc ranges
Thanks,

Driver Setup for PXI 2569 and PXI 2529 in Switch executive

Hi,
What sould be tha "Driver Setup" for PXI 2569 and PXI 2529 in Switch executive under 'Driver Session"
Regards!!!
Vineet Shukla

Hi Vineet,
You do not need to insert anything under Driver Setup. Anytime you are using NI switches, you can simply click Configure NI Switches when creating a NI Switch Executive Virtual Device to configure the topology settings of those switches.
Just so you know, you can insert information under Driver Setup, and then you wouldn't have to use the Configure NI Switches wizard. More detail on what to insert under Driver Setup can be found in the following KnowledgeBase:
How Do I Create a Virtual Switch and Use it in my Application?
http://digital.ni.com/public.nsf/websearch/A1F0D6A3357E14B386256E4B0071FDA2?OpenDocument
In short, you would type "Topology:" followed by the topology name such as "2569/100-SPST" or "2529/2-Wire 4x32 Matrix".
Let me know if you have further questions or if this does not resolve your issue!
Chad Erickson
Switch Product Support Engineer
NI - USA

Could facetime be used for international calls and free of charge???

Could facetime be used for international calls and free of charge???
Or does it work the same way as any other 2G calls???

For the iphone 4, I believe that have to do a initial voice call first (if it's not in your recent call list), and then start the live video chat (facetime). I could be wrong but if you have no recent call history with facetime, you would have to start a voice call again, and then immediately switch to facetime to prevent international cost. I haven't tried this so I would not now, but I only assume that if you don't have him/her on the recent list with facetime.

I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the ch

I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the change online since I had been waiting on the phone for over 10 minutes for a customer service rep to come available. Well when I made the change online since that seems to be the thing that Verizon wants it's customers to do and I didn't see all the different plans available and just did the upgrade to 8g. Next bill had over $900 in roaming charges on her phone line. I called the 1-800 number and waiting for a service rep and after 20 minutes of waiting and being put on hold was told it was the customers mistake and there was nothing they could do.Thanks for nothing. I called back after thinking about it and wondered why changing a data plan for the phones in the US would change a international call plan. Waiting over 10 minutes again between waiting for a service rep and hold for one to answer the call. Gave her all the information about it and she said she would call back. Well, 4 days later over the weekend she had nevered called back. So on the phone again for the third time and after 20 plus minutes again was told that when I did it online I click the plan that didn't include international call only the data plan. Explained that I never saw the difference in the plan packages so put on hold again and was told that they could credit $100 to my bill. Wow, thanks alot !!! We have been Verizon customers for probably atleast 12 years and this is how you treat your long term customers?

Verizon Wireless Customer Support wrote:
AHARDY454,
We definitely want to review options on what has happened. We are now connection, so you can hover over my username and send me a Direct Meesage so we can review your account information. We look forward to reviewing.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport
TonyG_VZW they can't exactly hover over your username unless you actually link it in your post. The generic username for all the reps just doesn't fly.

SAP CRM Tables and Fields for Contract start and End dates

Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja

correction
10 Replies Latest reply: 24 May, 2013 8:38 AM by nishant Vasudev
Tweet
SAP CRM Tables and Fields for Contract start and End dates
This question has been Answered.
Teja Dhar 12 Oct, 2009 8:03 PM
Currently Being Moderated
Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja
Correct Answer by Sreekantha Gorla on Oct 22, 2009 8:22 PM
Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
<:footer>See the answer in context
6281 Views
Topics: Customer Relationship Management
Reply
Average User Rating
0
(0 ratings)
My Rating:
Rating Saved!
Comment on your rating
Re: SAP CRM Tables and Fields for Contract start and End dates
Robert Jesionowski 14 Oct, 2009 2:23 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
you should try with FM: CRM_DATES_READ_SINGLE_OB or CRM_DATES_READ_DB.
There is something in table SCAPPT and SCGENAPPT.
Regards, R
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:30 PM (in response to Robert Jesionowski)
Currently Being Moderated
    Hi Robert,
I am not able to find contract start date and End dates in the tables SCAPPT and SCGENAPPT.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 2:35 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
Table SCAPPTSEG stores the contract start and end dates.
Thanks,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:32 PM (in response to Sreekantha Gorla)
Currently Being Moderated
    Hi Sreekanth,
I am not able to find contract start date and End dates in the table SCAPPTSEG.This is for appointments.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Correct AnswerRe: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 8:22 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Wim Olieman 23 Oct, 2009 9:12 AM (in response to Sreekantha Gorla)
Currently Being Moderated
    Hi,
I can tell you where the pricing records are saved, replicated from ECC.
The data from ECC table Axxx (e.g. A304) is replicated to CRM table
CNCCRMPRSAPxxx (e.g. CNCCRMPRSAP304).
Here you can find fields TIMESTAMP_TO and TIMESTAMP_FROM.
About the dates: what Sreekantha Gorla stated, about table 'SCAPPTSEG' is correct.
What might help is to execute program "CRM_ORDER_READ". Here you can find
the relevant entries also.
regards,
Wim
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 23 Oct, 2009 4:59 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi Experts,
Thanks a lot for your support.My problem got resolved.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
rajesh gadamsetty 27 Nov, 2009 12:29 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi Teja
Please let me know how you got the dates. i got the same requirement
Report Abuse
Like (0)
Reply
Correction on above mail.
Hi Sanjay,
Can you please help me to find the contract st art date and end date fetching from the table as below
ITEM DATES:
Select guid_set from table CRMD_LINK where guid_hi              = CRMD_ORDER_I-GUID AND
                                                                          OBJTYPE_HI     = '06'
                                                                          OBJTYPE_SET = '30'.
Select * from SCAPPTSEG where APPL_GUID = guid_set.
as from the table scapptseg has some unusal fields which fields to select to get the start date and end date and on what condition and isuppose we need to convert als the same
pls suggest further on same
regards
Arora

Various network setups for media serving and backups

Are there any good sites, blog posts, etc that show different home network configurations with a Time Capsule, external HDs and Macs for handling backups and media serving? Right now I have a simple Setup where my TC backs up my MBP. I also have a couple externals HDs w a lot of music and video that's not in my iTunes library on the MBP, the HD of which is at capacity. I know I want to be able to easily access all of that content on my MBP, AppleTV, iPhone, iPad. I also want to have a good backup solution (possibly even a backup of the backup for redundancy). I just don't know the simplest way to do it and haven't found a good resource to see the alternatives and/or pros/cons of different configurations. Any suggestions would be greatly appreciated!

This is as I posted a Self help forum the only BT presence are the forum moderators your very likely to get help from other forum users it is just a matter of waiting until some one with gaming knowledge reads your post
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Simple question; Mac Server Setup for Mail, iCal and Address Book Services.

Hi Guys;
I'm new to the Mac Server world and need a few questions answered.
I have purchased a new Mac mini Server for hosting File, Web, Mail, iCal and Address Book Services.
I’m comfortable setting up File and Web Services however I’m a bit uneasy setting up Mail, iCal and Address Book services to be access locally and remotely(via the internet).
My current setup is;
Internet connection (Dynamic IP) -> Router -> Mac mini Server.
I have purchased a domain name (Thornton-net.com) from DynDns.com + a custom DNS service as I can setup my router to update my domain’s IP address automatically.
I can access File and Web Services remotely (thortnon-net.com) perfectly without any issues via the Port Forwarding feature of the Router.
If I setup Mail, iCal and Address Book Services -> will Mail, iCal and Address Book clients be able to access these services hosted by the server via Thornton-net.com?
Message was edited by: Allan.Thornton

Welcome to the forums.
For mail services (and specifically for your outbound mail to be accepted by other mail servers) your mail server needs to have a static IP address and matching forward and reverse and MX records, or a tunnel to a static IP (with matching DNS), or you need another mail server where you have an authorized relay. Without that, your mail will be considered a spam engine, and dropped.
Additionally, your particular tier of service with your ISP (with a static IP) will generally allow server-oriented access and server-oriented network traffic, where a residential or other tier of service (with a dynamic IP addresses) can be firewalled.
The ISP controls the "high ground" of the network connections here, so you pretty much get to play by their rules and requirements. If they don't offer static IP, then (presuming their T&Cs permit it) you get to tunnel (via IPv6, for instance) to a tunnel broker, and receive your network traffic via that (and with matching DNS) point of presence. That could well be a tunnel for your mail at whichever your DNS provider is here, because you'll have issues with your dynamic address. (You get to sort out if they offer that.)
Far and away the easiest approach (if you want to host this stuff yourself) is to work with the ISP. They're inherently involved in your network, and they and they alone have full control over your reverse DNS configuration.

E90 - Use BT carkit for phone call, and wired link...

Hello,
just bought an E90 and it works great.
on thing irritates the hell out of me though :-), i can't seem to get BT carkit (nokia CK7W) and a wired link (via the headphone jack) to my car stereo to work like i want it to.
when i plug in the wired link, the phones asks what i connected (headset or musicbox), so i select the last one, and it repsonse by telling it will use the phone microphone, so... nothing weird here yet (i think) but when i start making calls, no mather what i try, the audio gets send out via the wired link to my car stereo, which is no problem, expect, the Nokia Carkit mutes the speakers of the car stereo :-), so, i hear nothing.
does anybody know how to get the BT carkit to handle phone calls, and the wired link to handle music?
or do i need to get an BT connection to my car stereo for this (like the sony MBR-100)?
any suggestion would be very much appreciated.
Joash

Various faults can occur that the customer doesn't think is their fault. Water can be spilled on the master socket >due to the voltage on the contacts this causes a green verdigree to occur when the water dries up . This causes low insulation faults to occur. The phone plug when moving furniture can be pushed further into master socket damaging the contacts. And as said any fault further into the home is the responsibility of the home owner . A fault on an extension socket or cable is chargeable due to carpet layers /electricians etc. Gone are the days of nationalisation . The majority of the public voted for privatation because Post Office Telephones were always being heavily criticised for time delays. Now people are upset they have pay as BT is now a private company--You cant have it both ways. It was good of BT activating your line for free. Not always the case elsewhere.

IMAP setup for .Mac account and Gmail

I've been trying to use my .Mac account and Gmail with mixed results. I have been using Mac mail for some time and have my folder structure setup for personal and work. Now I want to add a work Gmail account and simply have a separate inbox for the Gmail account. I store messages from both accounts into the folders I have in the .Mac account.
Gmail caused all sort of issues using IMAP in this structure, basically creating another series of folders below the .Mac folder tree. The inbox structure was fine and I could stored Gmail messages into the .Mac folders. But there were duplicate copies of the messages in the Gmail IMAP structure. I wasn't sure if I should just delete the Gmail structure, but the duplicates were driving me crazy whenever I did a message search.
Now I've backed Gmail down to POP and I have all sort of sync problems between my laptop and desktop systems. On my laptop it shows no mail, but when I check Gmail. There is mail in my inbox.
Does anyone have an idea about how to use two IMAP accounts successfully in Apple Mail?

Okay. This has got to be a common issue. And I think I have it solved.
The secret is using an IMAP prefix of "IMAP" and then creatin labels of "IMAP/Foldername" on Gmail.
It's all generously explained on these links:
First setup IMAP on Google like this: http://mail.google.com/support/bin/answer.py?answer=77663&topic=12814
Then follow the advice here: http://www.macosxhints.com/article.php?story=2008041016554622
And more here for help with Mail and iPhone: http://5thirtyone.com/archives/862
Things get cleaned up immediately! Ah ... bliss.

I paid for international calling and my phone want do ****. ned help have kids at home

In Punta Cana Dominican Republic this week. I am unable to make calls with my phone. Paid for international calling. Unable to call customer support

We know how important it is to get service while you're traveling, kilmurry. What happens when you try to place a call or sent a message? What model phone do you use? Our Global Team can also bee reached toll-free from a landline while you're traveling following the steps at http://vz.to/18oaptS. JenniferH_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Is it possible to setup for 2G calls and 3G data?

Similar Messages

Maybe you are looking for