Is it possible to silence the external ringer on the Pre when using headphones?

When I get a call on my Pre while using the headphones, I'd like to hear the ringer in my headphones only... Currently when I get a call it rings in the headphones AND via the external speaker. Can this be done and if so how?
Post relates to: Pre p100eww (Sprint)
Message Edited by hammerransom on 07-14-2009 11:16 AM

Karl Z wrote:
Hi,
I produce a large number of pages in InDesign.
In each document there are 5 layers. 1 layer with images and 4 layers with language-editions.
For safety and quality control I would like to print out the layer name together with the crop-marks.
Like... Documentname / page number/ layerImages - layer language
Is that even possible? That is...without me having to write it myserlf in the bleed. :-)
/Karl
InDesign's pasteboard, bleed, and slug areas are independent for each document page. Running header text variables in these areas can capture sources on document pages. If you place a text frame with a character style for the layer name, and a character style for the language name, on a layer, and capture them in a character-style-based running header in the slug, for example, the source from whichever layer is visible will appear in the running header in the slug area. Similarly, you can capture other text variables for page number, filename, date/time, etc.
It may take a little fussing to set it up the first time, but thereafter when you change layer visibility, the visible layer name changes automatically.
NOTE: Text frames on master page pasteboards, bleed, or slug areas do not appear on document pages unless they also touch the document page border.
Above: Master page view
Above: Page 1 view
Above: Page 2 view
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Message was edited by: peter at knowhowpro

Similar Messages

Just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??

just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??

Let's hope a couple things: that you have bootable clones of your drives also; that the backup drive for TimeMachine has over 3x capacity of the data you plan and are storing. I would also switch TM backup drives so you have a 2nd.
Fragmented free space affecting performance happens when the drive is too full which may mean there isn't enough free space for a full backup set.
1.5TB for backing up 500GB, while WD Green 3TB is $140 and WD Black 1.5TB is, about the same price.
I'd be worried about the integrity and directory, and whether you can afford to lose that drive. Defragging is also a very slow operation. the ideal: to just clone a drive, or start over with another drive and wait. cloning TM volumes has not been done or has it? SuperDuper hoped to but I don't think they or Bombich's CCC made it there.
Trouble with highly fragged is when free space gets to 20% normally, 1/3 or so though for TM volumes, and finding where and a chunk of space for the file being written. Does TM use large spare image files of like 2GB?
Best would be to ask in the TimeMachine section Snow Leopard
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard?view= discussions#/?tagSet=1009
where there are some good FAQ and tutorials, and people that know the ins-and-outs and shortcomings.

I have garagaband for iOs in my iPhone 4S, I connect my squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

I have garagaband for iOs in my iPhone 4S, I connect my Squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7

How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7. HP computer intel Dual Core. Thanks for any help!

Hey idw3,
Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/HT1364
Regards,
David

I have an iMac and I am running out of disc space. I am considering an external drive to house my iTunes library. If I buy a second drive to operate as a back up will time machine back up the disc on the IMac and the external drive with the iTunes library

I have an iMac and I am running out of disc space. I am considering an external drive to house my iTunes library. If I buy a second drive to operate as a back up will time machine back up the disc on the IMac and the external drive with the iTunes library?

If you have a considerable photograph and/or movie collection you may want to consider off loading those to the EHD too. Here are Apple's article showing how handle iTunes & iPhoto libraries.
iTunes: library on EHD
iPhoto: How to move the Library to EHD
Roger

When i call someone i can not hear the phone ring or the people talking. they can not hear me either. what i do notice if i select speaker then i can hear them through the speaker phone only

when i call someone i can not hear the phone ring or the people talking. They can not hear me either. what i do notice if i select speaker then i can hear them through the speaker phone only

If there's an Apple store nearby make an appointment with the genius bar to have it checked. Be sure to sync it and back it up, as well as import your photos and videos to your computer and back up your contacts separately (such as by sync them with iCloud) in case it needs to be replaced.

I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

- Try insering and removing the headphone plug a dozen times or so.
- Try cleaning out the headphone jack in the iPod.
- Resett he iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restoe to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
If not underwarranty Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Here is one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

The external light on the macbook.

The external light on the macbook..Is there a program that will allow me to dim/shut if off?
just got this GREAT LAPTOP!! but the apple logo is driving me crazy..
thanks

Are you talking about the Apple on the display? If so, that's your backlight shining through. The only way to dim it is to also dim the display.
The only other option is to cover the Apple in some way.
~Lyssa

All phones in the office ring at the same time but no CDR data

I've got something weird going on in my Tokyo office. About every 90 days or so all the phones in the office ring at the same time and there is no caller id displayed on any of the phones. I have tried running CDR reports on both the phones and the Gateway and I come up with no data.
I have a total of 36 phones at this location:
31 - 7945
2 - 7911
1 - 7936
2 - 7937
My CUCM is running 8.6.2
My 7945 is running 9-3-1 firmware
My 7911 is running 9-3-1 firmware
My 7936 is running 3-3-21 firmware
My 7937 is running 1-4-4-0 firmware
Any suggestions?
Thanks

Hi,
If the caller id details are not appearing on the phones then the first option is to enable detailed callmanager traces on callmanager servers to which these phones register ( preferably all servers ) so that the call related details can be captured. It should show the gateway from which the call is coming in as well as calling party info.
Link showing how to setup and capture traces from cucm
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml
HTH
Manish

AS3 how to put the buttons always on top of the external swf in the code below?

how to put the buttons always on top of the external swf in the code below? I am beginner use to as3, can someone help me?
thanks, for all!!
var Xpos:Number = 110;
var Ypos:Number = 180;
var swf:MovieClip;
var loader:Loader = new Loader();
var defaultSWF:URLRequest = new URLRequest("swfs/eyesClosed.swf");
loader.load(defaultSWF);
loader.x = Xpos;
loader.y = Ypos;
addChild(loader);
// Btns Universal function
function btnClick(event:MouseEvent):void {
removeChild(loader);
var newSWFRequest:URLRequest = new URLRequest("swfs/" + event.target.name + ".swf");
loader.load(newSWFRequest);
loader.x = Xpos;
loader.y = Ypos;
addChild(loader);
// Btn listeners
eyesClosed.addEventListener(MouseEvent.CLICK, btnClick);
stingray.addEventListener(MouseEvent.CLICK, btnClick);
demon.addEventListener(MouseEvent.CLICK, btnClick);
strongman.addEventListener(MouseEvent.CLICK, btnClick);

use:
var Xpos:Number = 110;
var Ypos:Number = 180;
var swf:MovieClip;
var loader:Loader = new Loader();
var defaultSWF:URLRequest = new URLRequest("swfs/eyesClosed.swf");
loader.load(defaultSWF);
loader.x = Xpos;
loader.y = Ypos;
addChild(loader);
// Btns Universal function
function btnClick(event:MouseEvent):void {
removeChild(loader);
var newSWFRequest:URLRequest = new URLRequest("swfs/" + event.target.name + ".swf");
loader.load(newSWFRequest);
loader.x = Xpos;
loader.y = Ypos;
addChildAt(loader,0);
// Btn listeners
eyesClosed.addEventListener(MouseEvent.CLICK, btnClick);
stingray.addEventListener(MouseEvent.CLICK, btnClick);
demon.addEventListener(MouseEvent.CLICK, btnClick);
strongman.addEventListener(MouseEvent.CLICK, btnClick);

TS3406 I have an Iphone 4s. When I make a phone call I cannot here the phone ring or the person on the other line pick up, unless I go to speaker phone. How does one resolve this phone issue?

I have an Iphone 4s. When I make a phone call I cannot here the phone ring or the person on the other line pick up, unless I go to speaker phone. How does one resolve this phone issue?

Hi there MitchR12,
You may find the troubleshooting steps in the article below helpful.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
-Griff W.

What is the silver ring on the new iPod Touch 5g?

What is the silver ring on the bottom left side of the back of the ipod?
can't figure it out

If you press it, it pops up and you can attach the included iPod touch loop accessory; it's like a wrist band.

When using headphones, only the left side works, HELP?

When using headphones, only the left side works when plugged into the macbook. I've tried 3 different working pairs of headphones and different media types and nothing seems to fix it. HELP?

Hi atgoetz,
Usually this is indicative of a bad headphone jack on the machine end, especially if you've tried three different pairs of known good headphones. Unfortunately there's not much you do to resolve the issue, externally. Considering it's a new machine no sense trying to fix something and making it work. I'd reach out to AppleCare for service on the unit and if it's brand new, possibly arrange a replacement unit.

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?

The documentation for Flash Builder 4 beta says that after opening flash from flash builder, I should click a "done" button in flash and flash should close and what I created in flash should be included as a component or container in Flash Builder. Using the Flash Builder 4 beta on Windows, when I click on the "create in flash" button on the properties panel for either the new flash component or container, Flash CS4 opens, I create something in Flash and no "done" button is present. Nor is anything present in the menus resembling a "done" option. Where is it?

Hi Jeffrey:
Still no done button. Now under commands in Flash I can convert symbols to flex components and containers and these show up in the Flash library.
Thanks:
Jim
Date: Wed, 30 Sep 2009 09:58:10 -0600
From: [email protected]
To: [email protected]
Subject: Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
Hi,
You may need to install FlexComponentKit.mxp to your Flash CS4 beforehand.
Jeffrey
Date: Tue, 29 Sep 2009 17:04:36 -0600
From: mailto:[email protected]
To: mailto:[email protected]
Subject: Flex Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
I apparently didn't get one. I've looked under various workspace configurations. Another thing that seems odd is that when Flash opens I get the opening panel that allows me to select the type of file and version of AS I want to use. I select new file with AS3. Any ideas on why the "done" button wouldn't be present and if the opening panel is what I should expect on opening Flash after clicking the "create in Flash" button?
>
>

Is it possible to silence the external ringer on the Pre when using headphones?

Similar Messages

Maybe you are looking for