Is it possible to sort or filter the switch routes under the switching tab?

In Teststand 3.1, is it possible to filter the switch routes under the switching tab in Action Properties? Since I have a large amount of routes that have been created in Switch Executive, how can I filter out some of the routes from the "Routes to Connect" section?

The TestStand Switching does not provide any inherent filtering capabilities. You do have a couple of options, however.
(1) NI-Switch provides the ability to set up route connections in
different groups. The Switch Page in TestStand allows you to
select Routing groups as well as specific Routes. It may be
easier for you to organize your Connections as groups and choose
between different groups.
(2) The Property page also allows you to build route connection
string and use that string for your Switching actions. It
may be easier for you to build a Route string and easily change that
string rather than selecting your routes everytime from within the
TestStand window.
Good Luck!
Tyler T.
Applications Engineer
National Instruments

Similar Messages

Is it possible to sort reminders in the list view?

The reminders, when entered with my iPhone, show up ordered by when I entered them. Is there a way to sort them by the due date? Is this something that will be added later on?

ICal Reminders won't sort on the actual device it was intended for - the Iphone
I just talked to Apple Express service over this problem. I went to the trouble of transferring my to-do list onto icloud Reminders - where each item asked for a priority ranking and where you are then given options for how to sort all the Reminders you entered - so that it can actually be useable as any Calendar/time management system would be. I chose "by priority" of course, but you can also choose alphabetically, etc. It must be said, at least to Apple, apparently, that the point of doing all this is so that the Reminders are available on your actual device - my iphone. The Reminders all synced immediately to the Iphone. However, the Reminders list is an unsorted jumble on my iphone. Even when I tap out a Reminder on my iphone itself and choose a priority, the item remains at the bottom of the list as the last thing I typed in. Apple Express Support "explains" that the priority ranking and the sorting choices are "not supported" on the device you want to use them on - the iphone. They offered me "an article" that explains this in detail. In other words, engaging with the Reminder function and choosing priorities and choosing sort orders is all just a cruel joke wasting your time. I would have been better off just printing off my Reminders list on paper and circling the high priority items in red ink. Oh - but you can't print it out either.
Unbelieveable. Apple's ICal Reminder function actually and actively leads you to engage with completing details and choices that don't even function, or in other words - aren't "supported" on the Apple device they are stated to be designed for. Is there a device on which this function is actually supported? "Not at this time"
The only way to have your to-do list sorted on the iphone is to assign a calendar date for each one of them and then they only appear on that specific date. You would not be able to view your whole list in anything other than the order you happened to enter the items. No calendar/time management system I know of makes you put a date on every item in a task list - some tasks have a due date, but most don't. And every calendar/time management system allows you to sort your list, or view your list in a sorted order. And print it out also.
Apple advertises this Icloud Ical/Reminders system as a time managment tool and fails to tell us that vital functions don't even work on your iphone.

Sorting Categories in the Objects tab

Has anyone run across Error 30584: DBMS_SQL has raised an unhandled exception? This appears when you try to edit the properties of a Content Area under the Objects tab. I am trying to sort the order of the categories and this error is listed at the bottom of the page. It is prohibiting me from editing anything under this tab. Is anyone familiar with this and/or do you have a fix or work around? It is a known problem on metalink, but there doesn't see to be any fixes yet.
Thanks,
AG

This problem doesn't occur in Release 2. You can ask support for a backport, but you should also consider upgrading.
Regards,
Jerry
PortalPM

Is it possible to sort photos by the date imported?

The majority of my photos were taken without the date being set in the camera.
In previous versions of iphoto it appeared as though each time I imported images (now called an event) the events were put in the order that they were imported.
I would like to go back to that method of ordering, on a temporary basis this will allow me to try estimate the date that each event took place because at least the events would be in chronological order.
Right now my events are completely unordered because of wrong dates.

I'm assuming that in addition to not having the date set in your camera you had not renamed the rolls in iPhoto 6 so every event is now titled "Untitled event"
The only way to fix your dates that comes to mind is to go back to iPhoto 6, go through all your rolls and name them 'Roll "date"' or even 'roll n' then reimport into iPhoto 7.0.2 . that way the events will be in the same order that the rolls were in iPhoto 6 and you can use the iPhoto "photos menu ==> adjust date and time" or "photos menu ==> batch change ==> set date" to modify the dates so the events work
Before doing anything I'd download Old Toad's library back up and do that (see pretty much any of his posts for instructions)
Larry Nebel
Message was edited by: LarryHN

Problem with 'sort and filter' feature of embed codes in Excel Online Web App

So my question has to do with the Excel Online feature where you can share a spreadsheet and embed it in a website with the option of allowing users to sort and filter the data. (The option is under the "Interaction" heading.)
One of the options if you look closely is "Let people sort and filter" which is not checked off. In the embed code you can see "AllowInteractivity=False". The problem is that when I check "Let people sort and filter"
the embed code changes completely - going from:
<iframe width="700" height="900" frameborder="0" scrolling="no" src="https://onedrive.live.com/embed?cid=dontworryaboutitEDFD383&resid=6BAA9620AEDFD383%21107&authkey=AFj3X8xq2U3IfDE&em=2&wdAllowInteractivity=False&Item='Sheet1'!A1%3AI32"></iframe>
to:
<iframe width="700" height="900" frameborder="0" scrolling="no" src="https://onedrive.live.com/embed?cid=dontworryaboutitEDFD383&resid=6BAA9620AEDFD383%21107&authkey=AFj3X8xq2U3IfDE&em=2&Item='Sheet1'!A1%3AI32"></iframe>
If I manually change 'false' to 'true' that doesn't do the trick so I'm not sure what to try next.
Any thoughts?

Hi,
We support Office for Windows in the current forum, since this question is about Office Online, I suggest you post the question in Office Online forum:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Sorting Music on the iPod

I was wondering if it is possible to sort albums on the iPod by year of release. I know how to make iTunes do this but when I transfer my library over to the iPod it is sorted by Artist in alphabetical order (which is perfect), then under each artist the albums are listed in alphabetical order. This is where I want the albums in the order of year of release.
Also I am using the 5th Generation iPod and Windows XP Pro for this.
Any ideas on how to do this?

So is this only possible if I use a Mac and not Windows. I did find this option in the Windows XP iTunes but all it did was add the Year to the Library display in iTunes itself. It did not changed the way that the albums are displayed on the iPod. Maybe I wasn't being specific enough though. The section of the iPod that I am talking about is when you select Music>Artists and then have selected an artist. This is where I would like it to be sorted by year. I beleive your suggestion would make it so that if you select Music>Albums then it would list by year of release in that section.
Thank you for the suggestion, although it was not 100% what I was looking for.

Possible to sort sheets/tabs ?

I have a Numbers file with dozens of sheets, all sorted oldest to newest.. Each time i open the file i have to scroll down to the last/bottom to update the current sheet. Not too big a deal on my Mac, but in Numbers for iOS it takes 10 or more swipes to get to the end/last sheet.
Is it possible to change the sort order of the sheets/tabs?

Hi Randy,
On the Mac, you can change the order of sheets by dragging them to the order you want in the Sheets list. You can also go directly to any sheet (or any table) by clicking its icon in the Sheets list.
Quesitions regarding how to do this in Numbers for iOS are better asked in the iWork for iOS community, where the iOS experts reside.
Regards,
Barry

How to make the inactive tabs silent?

Когда открыто несколько вкладок с каждой вкладки идет звук, который мешает активной вкладке.
Можно ли сделать чтобы звуки в неактивных вкладках отключались.
translite:
When you open multiple tabs, with each tab is a sound that prevents the active tab.
Is it possible to make sounds in the inactive tabs turned off.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Maybe also check this pref on the <b>about:config</b> page.
*browser.tabs.maxOpenBeforeWarn
*http://kb.mozillazine.org/about:config

Is it possible to filter the data in a rule group ?

Hi !
I'm using 3 rule groups in a sales transformation to differentiate commands, bills, and deliveries.
I would like to know if it is possible to filter for each rule group the data by BWVORG for example ?
Thx in advance .
Guillaume

As per my understanding filter at rule group is not possible.
You can use the same at the start routine.

Limit, filter, or sort images in the Faces pool?

Hi. How can I limit, filter, or sort the images Aperture presents when "Confirm Faces" is clicked in Faces view of a named Face?
I would like to either:
. Limit the universe of presented images with unnamed faces to those from specific Projects; or
. Filter the images presented (by, for example, year, or Project Path, or anything else helpful); or
. Sort the images by some other criteria than Aperture's (presumably) "most alike" measurement.
Thanks!
Message was edited by: Kirby Krieger

Shweeet! I love people who know things!
Thanks for saving me a ton of pain.

Is it possible to sort the list of Conditions/Calculations?

Is it possible to sort the list of Conditions/Calculations so that they display alphabetically in the list?
My list of conditions is getting quite long and haphazard now!
Cheers
Sapphie

I was afraid of that!. It is very disappointing because , as I am developing a set of reports for the first time, I will create conditions/calculations in quite a non-ordered way and then end up wanting to group similar ones together.
Hopefully a future version will allow this?
Lee

Is it possible to SORT the Login Items on

Is it possible to SORT the Login Items on
Apple - System Preferences - System - Accounts - Login Items?
Useful to load one of them before or after the others.
Thanks?

I don't think you can sort them like that but you can achieve this by using apple script.
for example if you want to launch Mail first and Safari second, paste the following into script editor and save it as an application.
tell application "Mail" to launch
tell application Safari to launch
You can also put a delay between the two:
tell application "Mail" to launch
delay 3
tell application Safari to launch
this will put a delay of 3 seconds between launches. Now remove Safari and Mail from login items and put the app you made using apple script there instead.

Is it possible to sort the songs which have an exclamation by them because they won't play?

Is it possible to sort the songs which won't play and have an exclamation sign against them.
I have just upgraded to Windows 7 which may have caused the problem as they played ok before.

Lost & Found playlists
Create a playlist called Found, select everything in Music and drag it into the Found playlist. Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist.
If the files still exist on the computer my FindTracks script may be able to help reconnect iTunes to them.
tt2

Is it possible to sort the Aperture Library by Lens used

Is it possible to sort the Aperture Library by Lens used? And get statistics on the different Lenses used?
I'm using latest Aperture.

I would just add that your Preferences settings have to be set to show the columns you need. Go to Aperture -> Preferences, and select the Metadata tab. in the "List View Columns" field, for whichever set you have chosen with the radio button, choose the set of data from the pulldown list that shows the fields you want. For example, I have the lens model field set in EXIF-Expanded set. I choose that set and those fields will show in the columns in List View.
Great tips, thanks!

Is it possible to sort Mac Mail Rules into alphabetical order? I have in excess of 50 rules and everytime I want to add to a rule, such as "delete incoming" I have to go through the entire list to find it.

Is it possible to sort Mac Mail Rules into alphabetical order? I have in excess of 50 rules and everytime I want to add or amend a rule, such as "delete incoming" I have to go through the entire list to find it. I have tried clicking on the heading "Description" but it does not sort. Any assistance would be greatly appreciated

Hi,
According to your description, my understanding is that use CMAK to configure split tunneling on VPN clients, traffic to specified devices can be routed via their own default gateway.
If the manually added route entries all have default metric and interface, clients will select one by the default routing rule, can’t select one of them according to clients’ own conditions. So, I am afraid that CMAK can’t implement the function which you need.
A blog described about How to configure split tunneling on VPN clients using CMAK, for your reference:
http://blogs.technet.com/b/rrasblog/archive/2007/06/11/split-tunnelling-using-cmak.aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is it possible to sort or filter the switch routes under the switching tab?

Similar Messages

Maybe you are looking for