Is it possible to specify which cpu to be used for each session ?
hi ,
like to check if in Oracle , is there any hints to specify the CPU to be used assuming the server have > 1 ?
pls advise
rgds
We may say the degree of parallelism for a query instead - http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/usingpe.htm#i1009828
SELECT /*+ parallel(tab,4) */ ....
Best regards.
Similar Messages
-
Is there possible to specify the source ip address used for Radius
I have a cat6509 configured to talk to Radius server (ACS), as I understood that the IP address used by Cat6k to talk to ACS is by using the nearest interface ip, can i explicitly specify the source address used by Cat6k in this case ?
thanks in advance.I am not clear whether you are asking about talking to Radius from the switch or from the MSFC? If it is from the MSFC you are correct that by default it will use as source address the address of the outbound interface. On the MSFC you can use the command: ip radius source-interface to specify what address to use.
On the switch I think that it will source its packets to Radius using the management/console IP address rather than the outbound interface. So no command is needed to specify the source interface.
HTH
Rick -
How do you specify which email address to use in a group list?
Hi All,
I've got several group lists created in Address Book. When I want to send an email to a group using Mail I cannot specify which email address gets used for a person that has multiple addresses in Address Book.
My process is as follows: create a new blank message, address the note to myself, move to the bcc field, click the "Address" button at the top of the message pane. When I click on a name that has multiple email addresses I can click on the one that I want, but when I click to another name and click back the previously selected address is highlighted again. It seems that the selection of the address won't 'stick'. Is there any way to force the selection? Also, I originally thought that the group list defaulted to the home address, but I noticed that some entries have their work address selected by default.
Thanks for any help.
-ChrisThank you, thank you, thank you!!! I knew there was an option to do that somewhere. For some reason I had it in my mind that you made those selections in Mail.
Kappy wrote:
Open Address Book and select a group. CTRL- or RIGHT-click on the group and select Edit Distribution List. You may then scan through the group members selecting the desired email address for each one with multiple addresses. -
Contacts: Specify which email address to use in Contact Group?
I have a few mailing lists that I keep in Contacts. However, I have multiple email addresses for some of these contacts. When I send an email to the list, the wrong email address will be used for some of the contacts. Is it possible to specify a default email address for a contact? Or a way to specify which email address of a contact should be used for each Contact group?
Thanks!Yes.
So select the group in Contacts. Then choose Edit->Edit Distribution List... and you can pick which of the emails you want to use for the group in question.
It took me a while to find it, but I've done it before so I managed to turn it up -
Hello,
our company want to buy new computers for the developers.
We have to use Windows XP as our OS because of third party products.
We develop J2SE + J2EE.
So my question:
Which CPU should we use?
I searched at google but didn't found any usefull sides about benchmarking an J2SE VM or J2EE VM.
Intel or AMD?
Are there some issues to be regarded?
Is the behavior of the VM different if you use an Intel or an AMD? (X86)
Our AppServer is JBoss 3.2.3.
Has Intel ore AMD some magic improvements for the SUN Java VM?
Any answer would be appreciated.
Thanks,
OliverOlli_ger,
Thanks for asking. To add more to the question, what about dual- and
multi-processors, such as Opteron 2xx and 8xx processors?
That is, can, and to what extent, does the Java compiler and the JVM
utilize multi-processors? And how is this done? Threads parceled out?
Using what algorithms? Are there "best practices" for writing code
that can exploit these chips?
Given the recent emergence of dual-core processors from both AMD and
Intel I would think Sun would have a white paper on this, but I've not
been able to find anything.
As I'm about to build a new system, and am looking at a dual processor
board that could take two dual-core chips, I'd really like to know.
Thanks again for opening the issue.
-BC -
I have synced two devices in FF. Is it possible to know which computers are synced using? I am worried about someone figuring out my email address and password.
HI nilhanw,
No currently there is not manage devices, only manage device. However changing the password will change the certificates on all the devices within less of an hour.
I hope this helps. -
In Adobe Acrobat 9 (Wndows 7) which I have been using for a long time now it says I cannot use it withoutv repairing. It instructs me to uninstall & reinstall...
I have not run into this yet with my AA9 and Win7, but have been seeing posts about it. I would try a repair before I would do an uninstall and reinstall. You might also turn off javascript for a bit in case there has been some javascript that has caused problems (ok, making wild guesses). If you do decide to uninstall, be sure to deactivate first, uninstall, run http://labs.adobe.com/downloads/acrobatcleaner.html, and remove any left over parts of the Acrobat folder. Then proceed to the reinstall and updates.
There is a question about whether being able to use it is correct, or you are just getting some message that is a spam that somehow got into your system (again, a possible javascript issue). Besides turning off javascript, you could also try isolating the javascripts to moving them to a temporary directory and seeing if one is causing the problem. -
Which bag do you use for 14 inch wide screen?
Which bag do you use for 14 inch wide screen?
I got confused when searching for possible candidates. Almost all wide screen bags are designed for 15.4 inch. Few 14 inch bags are fit only for the normal 4:3 screen.
Any advice from you are welcomed!
Many thanks!Hello,
Other brands you might want to look at are Brenthaven, Case Logic, Eagle Creek, EastPak, EZM, Jan Sport, Kensington, Swiss Army, Targus and Trager. There is also an earlier message thread here in the forum discussing carrying options, and a quick search of the Internet found some messages here, here and here that you might find of interest.
There really are lots of different solutions when it comes to carrying your ThinkPad, so it might be best to visit a few computer, electronics, office supply and sporting goods stores to find something you like and meets your needs (and budget). If you do not have your ThinkPad to yet, consider either bringing a tape measure or a piece of cardboard cut to the dimensions to "test" with bags.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Which web server is used for openHAB2?
I've recently set up IDE for openHAB2 and built it successfully.
openHAB dashboard & paper UI are web application.
But I can't find any web server settings in openHAB project.
Which web server is used for them?
Is it possible to add java servlet for my custom REST service?This is probably rather a question for the openHAB 2 mailing list. But to answer: Jetty is used in openHAB 2 as you can see here https://github.com/openhab/openhab2/blob/master/products/org.openhab.product.runtime/org.openhab.runtime.product.product#L57.
And yes, you can certainly add custom REST endpoints. You should do this as it is done with the default REST endpoints like https://github.com/eclipse/smarthome/blob/master/bundles/io/org.eclipse.smarthome.io.rest.core/src/main/java/org/eclipse/smarthome/io/rest/core/binding/BindingResource.java.
Regards,
Kai -
Which network is Oracle using for RAC traffic ? where you will get info ? ?
Hi,
I am using two node RAC on Oracle 10g R2 (10.2.0.3.0) version on SUN Solaris 10 . I want to know "Which network is Oracle using for RAC traffic ? where you will get info "
--KumarHi Kumar,
In 10g, you can query x$ksxpia. If the cluster_interconnect information is stored in OCR (default), you will get
SQL> select INST_ID,PUB_KSXPIA,PICKED_KSXPIA, NAME_KSXPIA,IP_KSXPIA from x$ksxpia;
If you specified the cluster_interconnects parameter in your init.ora:
Columns to look in : INST_ID P PICK NAME_KSXPIA IP_KSXPIA
And also you can use 'oradebug ipc' to see which interconnects the database is using:
SQL> oradebug setmypid
SQL> oradebug ipc
Hope it helps...
Thanks
LaserSoft -
Be grateful for your help with Photoshop Elements which I have been using for several years.
Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response
The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.
-
How to set up set which NIC card to use for multicast?..
I just downloaded Rolling Patch 1 for WLS6.0SP2.
While reading the README file it says
" ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
Can anyone tell me how to set this?. on my WebApplication server it has two NIC
cards and I want to use the NICcard which is being used to talk to internal network
for multicast messages.
One more thing,
Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
place where I enter ISSUE number and should get the detailed description of bug/issue
etc..
Thanks for helping,
Nilesh
Thanks Kumar, I'll try this.
Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
used to talk to AdminServer?.
The other problem I am facing is when I restart the AdminServer in recovery mode
it's not finding my WebApp servers, because my webapp servers are on public network
and my admin (management) server is on private network.
please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
, for more details about my problem.
Thanks,
Nilesh
Kumar Allamraju <[email protected]> wrote:
><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
><html>
>You should be able to do it via console in 6.1
><br>Not sure if it was added in 6.0
><p>For 6.0 you can set this via command line
><br>java -Dweblogic.interfaceAddress=<addr>
><p>You need 6.0 SP2 RP1
><p>--
><br>Kumar
><p>Nilesh Shah wrote:
><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
><br>While reading the README file it says
><br>" ISSUE 42518: Provided a way to set which NIC card to use for multicast
>traffic
><br>"..
><p>Can anyone tell me how to set this?. on my WebApplication server it
>has two NIC
><br>cards and I want to use the NICcard which is being used to talk to
>internal network
><br>for multicast messages.
><p>One more thing,
><p>Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
>am
>looking
><br>place where I enter ISSUE number and should get the detailed description
>of bug/issue
><br>etc..
><p>Thanks for helping,
><p>Nilesh</blockquote>
></html>
>
-
I accidentally set up two accounts. One account with my old e-mail address which I've been using for years and has all of my purchases on it. Now I have a new account with my current e-mail address. How do I disable this new account? I need to disable the new e-mail address account so that I can add it as an additional e-mail to my old account. THEN, how do I make this new e-mail address my primary e-mail for this old account?
Did yoo go to Settings>iTunes and App Stores and sign out and sign back in?
Next see:
Frequently Asked Questions About Apple ID -
Following a software update, I can no longer access/authorise music purchased via iTunes from my old Apple ID, which I have not used for 8 years, and no longer have password. Any ideas how I can re-access/recover that music?
Apple ID FAQs > http://support.apple.com/kb/HT5622
-
Which extraction methods are used for extracting AR , AP, GL , cost centre
which extraction methods are used for extracting AR , AP, GL, cost centre account data from R/3 system.
please let me know what type of extraction we use...generic or FISL.... OR COPA
ON WHAT SCENARIOS WE USE THIS EXTRACTIONS..
if any have documents on it please email...please send an email documents ..
to [email protected]
iam bit confused with sap help...
will reward full points
please replyHi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.
Maybe you are looking for
-
I have installed Adobe Lightroom CC. In the process of launching, a popup appears, that says: "AN INTERNAL ERROR HAS OCCURRED. Cannot create the required folder: /Users/(my user name)/Library/Application Support/Adobe/Lightroom/Develop Presets."
-
Source ip filtering with class map on cisco ace30
Hello , I would like to know if it is possible to filter source ips connecting to a virtual ip within a class map configuration ( or something else ) ? access-list S_IP_FILTERING line 8 extended permit ip host 1.1.1.1 any class-map match-all S_IP_
-
Minimum shelf life and delivery completed indicator at GR
Dear Gurus, I have two questions: 1. As per my knowledge minimum shelf life is "minimum number of days for which the material must be keep for GR to be accepted" , (i.e. if it is 10 days the material should accepted for GR only after 10days of produc
-
Safari was very slow in opening up Google sites. I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section. That seems to work well. Are there any risks t
-
Error message:FRM-12001: Cannot Create the record group(check your query)
Requirement: Need to get employee name and number in the LOV in search criteria. So I created LOV "full_name" and Record group Query under Employee Name property palette with select papf.title||' '||papf.last_name||', '||papf.first_name||' '||papf.mi