IS it possible to speed up (fast forward) motion in imovie?

IS it possible to speed up (fast forward) motion in imovie?

… sure:
• select clip
• in the Menu/Clip you'll find Fast Forward, 2x, 4x, 8x, 20x ........

Similar Messages

  • What is the speed of fast forward or rewind an mp3?

    What is the speed of fast forward or rewind an mp3?
    I often lisen 3 hour MP3 and with my old mp3 player I takes a lot of time forward or rewing 1 hour.
    Does anybody know how takes around forward or rewing 1 hour?
    Thnaks very muchs.

    Well, I have bought one today.
    As if someone else interested in:
    1) Nano 6th use a slide bar, so you can move instantly to anywhere. The accuracy in a 2 hour 30 minutes is aprox. one minute by one minute (minimun)
    2) If you use the forward button, you can lisen while you move forward. The speed is aprox:
         10 sg = 5 min.
         20 sg = 11 min
         30 sg = 17 min
    Thanks  :-(

  • Modify speed for fast forward

    I have movies that I am editing and have sections that are very repetitive. I can edit them out, but being able to set them at 500% speed in this case would create a fast forward effect that is desirable. I have done this many times in the past, and I mean the past as in several years ago. And it worked fine. In the mean time I have had to reinstall FC Express, and this feature no longer works as it used to. When I speed up a section, the video speeds up fine, but the audio remains untouched. Obviously that puts everything out of sync. People still talk normally and not sound like cartoon characters as they  would if sped up. I am editing an off road video, and when sped up the motors do not represent what the vehicle is doing after speeding it up. Some setting is wrong, but I cannot seem to figure out which it is. 

    It may be that you have unlinked the audio from the video.
    Select Modify>Link or press cmd L and try again.

  • Can you fast forward footage on iMove 08?

    Simple question:
    Once you have loaded footage into the iMovie 08 project, how does one take the selected footage and fast forward it to create a fast forward effect? I could find the task in the iMovie 09 directions but not in the iMovie 08.
    Anyone? And thanks in advance.

    iMovie 08 was primarily designed for SIMPLE editing.
    Slow / Fast Motion is easy with iMovie 06.
    http://www.geethree.com/slick/imovie8.html

  • Fast-forward through voicemails?

    Quick question which I'm not sure about:  When using an IP Phone like the 6920 series for example, is it possible to skip or fast forward through voicemails (using Unity Connection )?
    Thank you!
    -rya

    Hi Rya,
    This is most possible The exact keys depend on the "Conversation" that you
    are using, but here is an example for the Standard Conversation;
    During Message Menu and Shortcuts (Standard Conversation)
    Revised May 2009
    While listening to a message, press:
    Action Key(s)
    Restart message
    1
    Play message by number
    1 2
    Play previous message
    1 4
    Play next message
    1 6
    Save
    2
    Delete
    3
    Reply
    4
    Reply to all
    4 2
    Return call to sender
    4 4
    Forward message
    5
    Slow playback
    6 4
    Fast playback
    6 6
    Change volume*
    6 5
    Reset volume to default level*
    6 3
    Rewind message
    7
    Pause or resume
    8
    Fast-forward
    9
    Fast-forward to end
    Play first message
    1 7
    Play last message
    1 9
    Toggle urgent status on/off
    1 8
    Skip message, save or restore as saved*
    # 2
    Skip message, save or restore as new*
    6
    Skip message, save as is
    Send fax to fax machine for printing*
    6 8
    Play message properties
    1 5
    Cancel or back up
    Help
    0
    *Not available on some systems.
    The other are here as well;
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/user/guide/phone/7xcucugphone210.html#wp1011412
    Cheers!
    Rob
    "Always movin' ahead and never lookin' back" - Springsteen

  • Fast forward time stretch effect / blurring / MOV

    Hello friends,
    So I did an entire 3 minute video using a time stretch effect (fast forwarding, time elapse) to match a voice over.
    I saved it out as FLV so that the client could proof it. All was good so I wanted to provide an MOV file in H264 to increase quality / make Apple compatible for You Tube viewing.
    When I did, the FF time stretch video really blurred and pixelated in the video.
    Does anyone have a suggestion for a codec or something that might reduce the amount of dragging / pixelation / bluriness? (That of course has high quality)
    Video was shot using a Canon Vixia HFS30.
    Thanks in advance! 

    Hi Bill, Steve,
    I'm hoping you can shed some light now that I can actually show you what the issue is here with the fast forward motion effect. I've put two files I've uploaded below. Same issue on both.
    The fast forward effect is on from 0:00 - 0:45
    Quiktime, H264 -
    http://youtu.be/Vs7u0kQ0hVQ
    Also, can you tell me why the MOV files don't seem to fill the frame?
    Flash, FLV
    http://youtu.be/lfnci6Enxkk
    As you can see, the higher you set the resolution, the more pixelated I become.
    Any help you can offer is appreciated.
    Thanks

  • Fast/slow motion?

    Is there anyway to use fast/slow motion with imovie 08, without downloading imovie 06 which is no longer on Apple website?

    Buy iLife '09. It's version of iMovie allows fast/slow motion and many other "missing" features.

  • Is there a way to speed up the pace of the video (watch in fast-forward) I am watching?

    I am watching a class lesson that is 3 hours long and my teacher talks extremely slow. Is there a way to speed up the pace of my video? I know on some video players you can watch a video in 1.5, 2.0, 2.5 etc. levels of fast forward.

    Have you got the drives set up to spin down when not in use?
    Have a look at the Energy Saver settings in System Preference on the Mac.
    Make sure the "Put the Hard Discs to sleep when possible" box is not ticked.

  • Is it possibly to fast forward songs on ipod touch with headphones?

    I had some 3rd party headphones with the remote control and volume rocker on them and they started breaking. The odd thing was when using them the song would sometimes play at 2 times the speed. I would have to unplug and then replug back in the headphones. I got new headphones so the problem is fixed but how is it possible to do this on purpose?

    Hi. Try this. Double click the pause/play button, on the second click, hold the button down. This should fast forward the music.
    Hope this helps
    Stedman

  • HT1414 My iPod touch got stuck on fast forward on the sound and I can't get it back to normal. How do I restore normal speed sound?

    My iPod touch got stuck on fast forward on the sound and I can't get it back to normal. How do I restore normal speed sound?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • How is it possible to have 4 buttons for fast forward/reverse in iTunes?

    Hi,
    I want 4 Buttons for fast forward/reverse. So 2 Butoons for next/previous track and 2 buttons for +10/-10 seconds. How is it possible? It sure is...

    Hi,
    Try to combine your declarations.
         .newStyle {
    font-size: 50;
           text-decoration: underline;
    <mx:Label name="UserName" width="80" x="89" y="80" text="UserName" styleName="newStyle">

  • IMovies 10.0.4: How do I get Slow Motion and Fast Forward (Speed Editor) to function?

    I am using iMovie 10.0.4 and cannot get fast-forward or slow-motion functions to work.  I have organized my clips into a Project and attempting to edit them in the Timeline.  With the target clip selected in Timeline, I am unable to access the fast-forward or slow motion functions in the menu bar nor by right-clicking to select the Speed Editor.  Example screenshot below.   Thanks for any help you can throw my way.

    Hi,
    I have this problem too.
    Do you have the issue only on new projects ?
    Do you still have an old project where you used slow motion ? if so, just duplicate the project and cleanup all clips from the new project and you have a clean empty project with working speed controls. It works for me.
    Let me know.
    I've created my own question about it because I didn't see yours at first.
                     iMovie 10.0.3 on OSX 10.9.4 speed controls disabled on new projects            

  • I was listening to Audio Books on my iPod Touch in the car when the speed changed to fast forward on all the audio books. How do I correct this?

    I was listening to Audio Books on my iPod Touch while on a motor trip when the speed of the playback suddenly changed to fast forward for all the stored audio books. How can I correct this?

    Actually found this answer in the archives: When the audio book is playing, hold finger on middle of screen until the speed selection message appears and change from 2x to 1x. Thanks for your response though!

  • How Can I Fast Forward through clips - Any key Command?

    I am watching some long clips in my event library ... I want to choose sections to move to the project library.
    As the movie plays ... I can use the arrow (left and right) to slow mo forward or backward.
    What I need is a key command that will give me a fast forward ... say 2 or 3 times play speed.
    The only way I know to fast forward is to use the trackpad with my fingers but this way I keep losing my position on the clips and skip over rows ... you also have to drag back to the beginning of the next row and know where you are ..
    To find parts of clips that you want to select and drag up to your project this seems like a necessity especially when viewing a long movie ... it's really tedious to have to drag through the whole thing.
    AM I out of luck?

    OOOpps ... sorry ... wrong forum ....

  • How can I fast forward in Podcast?

    I want to know how to fast forward in a podcast?  I can hold down the fast forward button and it goes a few seconds and I can rewind for a few seconds.  However I want to fast forward minutes.
    Any suggestions?  I see in the manual on page 62 about podcast and audiobook controlls but I don't have playback speed or a skip to any point in the timeline.

    To skip to any point on the timeline, drag the playhead along the scrubber bar.  While dragging, slide your finger down to slowdown the scrub rate.

Maybe you are looking for

  • Error while login to UCM console.

    Hi, I am getting below error while login with 'weblogic' in UCM 11g console "http://server IP: 16200/cs" "Content Server Request Failed Unable to load the user information. Possible database connection failure encountered. Error message: (!csDbUnable

  • Not Liking The Yellow Tinted Screen

    I'm kind of disappointed that Apple decided to put a cheaper screen in the new phones. Hopefully I'm wrong and that it's not a screen and can be fixed through an update or something, or I can return this phone in a month or so and they'll have the ne

  • PLEASE HELP IPOD NOT WORKING AT ALL!!!!!!!!

      so my ipod isnt turning on and when we charge it nothing happens either , we pluged it into the computer and it didnt reconize ( itunes is the it) the device, I  have a 4th generation and my mom thinks that the battery is dead im wondering do you g

  • Vision Builder for Automated Inspection: Image randomly appears upside down

    Hi everyone, I seem to be having a rather unusual problem here. I'm using an IDS UI-6280 camera to simply take a picture and log it to a file every minute. However, about 50% of the times when I start VBAI, the image appears upside down. The only sol

  • Creating links in repeat regions

    How do I link a downloadable word document in a repeat region displaying information from a database. The word document would be different for each record. Thanks. I posted this question 9 hours ago and have not received a reply. I am not sure that y