Is it possible to start a project in FCE and finish it in FCP?

Hi all!
I am at home trying to work on a school project and was wondering if anyone had experience with working on a project in FCE then sending it to FCP to finish.
Is this possible?
Thanks!

Hello and welcome to the forum.
You can open your FCE project in FCP, but, once you save it in FCP, you can't take it back to FCE.

Similar Messages

Is it possible to save a project in cs4 and then open it in cs3

Hi, i would be greatful if anyone knows if there is a solution to this problem.
At home i use cs4 but in university they only have cs3, i know it is possible to open up a cs3 project in cs4 but unfortunatly if i do any further work on this at home in cs4 and save the project it no longer seems compatible with after effects cs3. So, is it possible to open a cs4 project in cs3?
Any help would be extreamly appreciated.
Ryan

No, it's not possible without using hacks. And Adobe can't support or endorse hacks
Bear in mind that not only there are new features in a new version which can't possibly be recreated by an older version - also, there are enhancements to existing features, which would make them render differently in the two versions.
That said, there are people posting such hacks, as Sébastien pointed out.

HT1918 Is it possible to start a new iTunes account and transfere all purchase data from an existing iTunes account then keep both accounts active but separate from that point onwards?

We have a family iTunes account but we are now wanting to separate into 2accounts for financial reasons. Is it possible to transfere all purchased material into a new iTunes account then continue to have the 2seperate accounts with separate billing information going forward.

All content from iTunes is tied to the account that originally bought/downloaded it, and it's not currently possible to copy or transfer content to a different account. You can create a new account for new purchases, and as long as the current account is authorised on the computers iTunes that you use then you should be able to continue using that content.
Note that if you use iTunes match, turn on automatic downloads or re-download past purchases for an account then you risk tying that computer to that account for 90 days : http://support.apple.com/kb/HT4627

Can you export a project to Compressor and keep editing in FCP???

Hello my mac guru-ness,
I have a query, if I edit in FCP and export out to Compressor or Quicktime conversion, I am locked out from continuing to edit in FCP. Is there a way around this???
I need to edit 4 x 5 minute video's and need to export the 1st video to Mpeg2 and FLV via Compressor and Quicktime Conversion and then continue to keep editing the next video while the first one is still converting. How can I do this???
If I had 2 mac pros networked together, could I get the 2nd mac pro to convert the 1st video while I continue to edit the remaining 3 video's???
Would Final cut server help me in this scenario also?
Your assistance would be gratefully appreciated.
kris

To build on g's answer ... when exporting to Compressor from FCP, you will not be able to use FCP until the export is completed.
If your Macs are networked together, you can do a couple of things.
1. Export your sequence as a Quicktime file, then transfer it to your other Mac Pro, then have that Mac Pro encode.
2. I would recommend setting up your Mac Pro's as a little QCluster. Since the MP's have multiple cores, you can create multiple "instances" in QMaster Preferences. Instances are QMaster's way of dividing your multiple cores to spread the encoding across all cores. I generally create half the number of instances from the total number of cores available. For example, with an 8 Core MP, I would use 4 instances.
Read this article for further information on how to set up a QCluster: http://visionstudios.ca/RenderFarm/RenderFarmleft.html
On your MP that you will be editing on, you can then disable a couple of instances so that you wouldn't see as big of a performance hit while encoding and editing simultaneously. You use the Apple Qadministrator app to configure a cluster like this.

Timeline Start and Finish Dates - how to not display finish dates for tasks not added to timeline

I have a project, Project 1, with start date 1 Jan 2014 and finish date 31 Dec 2014. When I switch to timeline view, the timeline spans this period. I now want to create a second view for a sub project within Project 1, called Project 1A. It
starts 1 June 2014 and finishes 31 August. I only want to see Project 1A's tasks and time span on this second custom timeline view. I create the new view, add the tasks from Project 1A to the timeline, and save the view as CustomView1A. My problem: CustomView1A
shows the tasks for Project 1A, but also shows the dead space between 1 Jan 2014 and 1 June 2014, as well as the dead space between 31 August and 31 December.
I dont want to see the dead space. I want CustomView 1A's timeline to start and finish on Project 1A's start and finish dates.
How do I adjust CustomView 1A's timeline borders on the left and right to exclude the dead space?
Hanneliese Fourie

Dear Sir,
I checked in CO41 and it allows me to convert planned order to production order and not have any provision to re-scheduling the planned order . Any function to reschedule planned order to future dates ( whose start dates and finish dates are in past ) ?
Thanks,
SL

Cannot import an iMovie HD project into FCE

Hi,
I've been trying to import an iMovie HD (iMovie 6.0.4) project into FCE and all I get is an error:-
I've also tried to import the same project file into iMovie '09 but nothing is imported.
Any suggestions, please?
Thanks,
TonyT

Hi
NO - Not really !
iMovie 1 to HD6 - is one program and it's evolution.
iMovie'08 to '13 - is something completly different - NO code is used from previous iMovie !
So really No other program - iMovie'08 - '13 or FinalCut Express, Pro or Pro-X or Adobe Premiere etc can import a project so that all work (transitions. texts etc) still remain in an editable form.
What You can do is
• Finalize project in iM HD6 - or -
• Export out as a movie - QT.mov and use this as a template in FinalCut etc and re-build - (doesn't work in iMovie'08 - '13 as it only holds one Video track).
Yours Bengt W

In Premiere Pro, is it possible to change the project aspect ratio once started?

In Premiere Pro, is it possible to change the project aspect ratio once started?

On a side note, 'projects' do not have as aspect ratio, sequences and footage do. And a project can contain any number of sequences or footage.

How to be more specific with start and finish times in microsoft project

I am trying to schedule down to the hour with the start and finish information. Is that possible?

schedhelp,
a) yopu can set the "time" for either Start Date or "finish" date, but not both. Project caluclates one or the other when you supply one value.
b) Yes, you can definitely schedule down to an hour, however manually typing in the start or finish times will create constraints for the schedule and you are really not using Project for what it is supposed to do (Dynamic Scheudling).
c) If you are just using project Online, in the Schedule PDP, navigate to Options tab, and select Time with Date, to see the times attached to each of the dates, and modify them
d) if you are using project Pro, go to File >> Options >> General >> date format and select a format that shows time along with date, to see the times attached to each of the dates, and modify them
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Starting a project with a voice track

I would like to start my project with a voiceover, but it seems that this isn't possible... is it?
The video is basically going to be a collection of stills and text with a narrative and background music. But I want to start out by getting my spoken ideas recorded and then go from there. Is this possible in iMovie? Or will I have to record these voiceovers in Garageband, or another audio app, and then import them into iMovie?
This is holding me up, so I hope someone can answer soon!
Thanks....

Welcome to the forum.
Unfortunately, there is no Preset to match your footage. PrE does not yet have PrPro's Desktop Preset, that allows customization, such as you need. Obviously, PrPro would be an option, albeit an expensive one.
One option would be to choose an HD Preset, such as 1440 x 720. The compromises would be that you would have black bars around the image. You could Scale up to match, say the sides, leaving letterboxing. Then, and depending heavily on how you need to deliver the output, you could use something like Flash (FLV), and crop in the output. Not all delivery schemes allow for that, so you will be limited.
Good luck,
Hunt

NOT POSSIBLE TO START ESSBASE WHEN SSO INITIALIZATION FAILS

Version is 11.1.1.3. My Essbase is not starting. Issues from the logs and what I have attempted are as follows. I have highlighted the relevant areas in bold.
When Starting Essbase from products/Essbase/bin/start.bat:
C:\Hyperion\products\Essbase\bin>start.bat
C:\Hyperion\products\Essbase\bin>REM eis
C:\Hyperion\products\Essbase\bin>net start "Hyperion Integration Services"
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Hyperion\products\Essbase\bin>REM APS
C:\Hyperion\products\Essbase\bin>call C:\Hyperion\products\Essbase\aps\bin\start.bat
C:\Hyperion\products\Essbase\bin>REM aps
C:\Hyperion\products\Essbase\bin>net start HyS9aps
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Hyperion\products\Essbase\bin>REM EAS
C:\Hyperion\products\Essbase\bin>call C:\Hyperion\products\Essbase\eas\bin\start.bat
C:\Hyperion\products\Essbase\bin>REM eas
C:\Hyperion\products\Essbase\bin>net start HyS9eas
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Hyperion\products\Essbase\bin>REM EssbaseAgent
C:\Hyperion\products\Essbase\bin>net start hypservice_1
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
C:\Hyperion\products\Essbase\bin>REM EssbaseStudio
C:\Hyperion\products\Essbase\bin>C:\Hyperion\products\Essbase\EssbaseStudio\Server\startServer.bat
C:\Hyperion\products\Essbase\bin>setlocal
C:\Hyperion\products\Essbase\bin>set CONFIGTOOL_HOME="C:\Hyperion\common\config\9.5.0.0"
C:\Hyperion\products\Essbase\bin>call ""C:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"
Logging configuration file is not found. Expected filename is C:\Hyperion\products\Essbase\bin\.\server.properties
Log file location is:
C:\Hyperion\logs\esbstudio\server.log
13:23:09 11/01/11 INFO Starting up
13:23:09 11/01/11 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Bui
ld 090, June 25 2009
13:23:16 11/01/11 (system) WARNING Failed to load driver for sap
13:23:16 11/01/11 (system) SEVERE Cannot load Teradata connector
13:23:16 11/01/11 (system) WARNING Failed to load driver for teradata
13:23:16 11/01/11 (system) WARNING Failed to load driver for mysql
13:23:16 11/01/11 (system) WARNING Failed to load driver for netezza
Essbase.log:
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Error(1051223)
Single Sign On function call [css_init] failed with error [CSS Error: CSS method invocation error: com.hyperion.css.CSSSystem.<init>]
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Info(1051198)
Single Sign-On Initialization Failed !
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Error(1051527)
In Shared Services Security mode it is not possible to start Essbase when single sign on initialization fails.
AND
C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-10-25 11:26:11,039 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-10-25 11:26:11,039 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-10-25 11:26:11,085 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-10-25 11:26:31,023 ERROR [main] 20:1092:Failed to initialize EPM System registry. *[Root Cause: java.sql.SQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: machinex:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)*
*2011-10-25 11:26:31,023 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\,* com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-10-25 11:26:31,023 INFO [main] CSS system intialization failed. : [21484 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
What I have attempted:
- Attempted to connect to Shared Services, Workspace url's - YES
- Checked openLDAP & my Database is running - YES
- Added following to Configuration File :
SharedServicesLocation machinex 28080
AUTHENTICATIONMODULE CSS http://machinex:28080/interop/framework/getCSSConfigFile YES, but same error
- Changed essbase.bak to essbase.sec YES but same error
- netstat -an to check for 1423. Port 1423 is not listening, although ALL TCP Ports have been enabled. So YES but same error.
- Read Knowledgebase article # 954322.1 - the suggested things in there don't seem to apply to my case, unless I am missing something.
At this point does anybody have any suggestions ?

An update: Just for kicks, I tried restarting Essbase using Start->Programs-EPMSystem->Essbase->EssbaseServer->Essbase.bat and apparently now Essbase is started.
EAS, Studio and Planning however are down.
Excerpt from the HyS9eas-sysout.log:
[ERROR] RegistryUtils - SQL Exception when trying to create a new connection [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: machinex:1433. Reason: Connection refused: connect
* CRITICAL ERROR: Common Security Services initialization failed. Please *
* make sure that a valid entry is provided for SECURITY_CONFIGURATION in *
* OlapAdmin.properties. This is required if Shared Services is enabled. *
* Please restart the server after the changes. *
Stopping DAO factory!
HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
java.lang.ExceptionInInitializerError
.... bunch of java code.
This is really strange. There is NOTHING that I changed, started or stopped which could have caused Essbase to start magically all of a sudden.
Any insights into the cause of all this ?

Please help i started my project video format 720HD resolution 12x720 rate 25p at last when i finish and burn to dvd the edges are cut off any one help please i am really in trouble

please help i started my project with video format 720HD, resolution 12x720, rate 25p. at last when i finish and burn to dvd the edges are cut off and my logo cut off the screeen aswell any one help please i am really in trouble. thanks

Sorry, but I don't know anything about that app.
I did go to their Web site and I see they have a support link. Perhaps you can get help there or in their forum.
If you are OK with a DVD with a basic menu, you could try the Share>DVD option in FCP.
Good luck.
Russ

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and als

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and also to open it as Administrator as suggested by a friend but it still refuses to work. I need direct help from Adobe but don't know how to get to them on this website as they seem to rely on user forums to advise customers.

WhiteHouse Norm
This question is already being responded to in the following duplicate thread
Premier elements 11 keeps stopping
Please reply in the other thread which has a discussion in progress.
Thank you.
ATR

Can't open or start new projects in Logic after updating to Snow Leopard

I've been having a few problems with Logic 9 since updating to Snow Leopard (10.6.8 ) a couple of days ago.
Every time i click on "new" and try and start a new project - logic freezes and i get the rotating circle sign and Logic stops responding - eventually i need to force quit and start again.
Existing projects seem to be functioning fine, although slightly slower than before.
Does anyone have any fixes for this?! Not being able to start a new project is quite a big problem!
Thanks
Mac Pro, Mac OS X (10.6.8), Logic Pro 9.1.8 (32 BIT)

The mistake was trusting only TimeMachine as your backup/restore.
If you had your users files also backed up to a external storage drive, or used a bootable clone (since they can be directly accessed) then you could have recovered just your files.
This is what I suggest you do since TM apprantly botched things.
1: Visit my user tip here and attempt to fix Snow Leopard in place, the purpose here is to get a booing machine so you can use a working Admin account to copy the user folder containing your files to a regular external drive.
I suggest #8 and #6, this will reinstall OS X over itself to fix it, then reset the User Password so you can hopefully log in.
..Step by Step to fix your Mac
2: This method will also work, you install Snow Leopard onto a extenral drive and boot from it. This is probally a more safer choice than above, it's certainly less work, but it needs a blank external powered drive.
.Create a data recovery/undelete external boot drive
3: Once a copy of your users files is off, then your free to revert your machine back to Snow Leopard.
The ENTIRE drive must be selected and erased, to set the GUID, erase the RecoveryHD and EFI partitions.
How to erase and install Snow Leopard 10.6
Read this to see how OS X 10.7+ changes the User/Library folder, thus can't be used with Snow Leopard.
How to revert your Mac to Snow Leopard
How to revert OS X back from Mavericks
Later read
Most commonly used backup methods
Make a bootable clone of your boot drive

I just got photoshop cc 2014 on windows 8.1 64 bit, and it starts up on the white layout and and whenever I start a project it is in a window? Also whenever I try to change on of these it does not save. I am using the trial

just got photoshop cc 2014 on windows 8.1 64 bit, and it starts up on the white layout and and whenever I start a project it is in a window? Also whenever I try to change on of these it does not save. I am using the trial. Basically nothing saves and it was all screwed up when I first got it.

Do a screen screen capture and post it here so we can see what you stating about a white layout...

Unable to start SSIS Projects : SQL Server 2008R2 Dev edition installed on top on SQL Express 2008 with Advanced Services

Hello,
I first installed SQL Serrver Express Edition 2008 with Advanced Services (As a part of some client's software)
Now I have isntalled SQL Server Developer Edition 2008, by selecting ALL features and client tools.
Now, with BIDS, I can start SSRS and SSAS Projects, but I can't start SSIS Projects.
I am getting below error message :
To design Integration Services packages in Business Intelligence Development Studio, Integration Services has to be installed by one of these editions of SQL Server 2008: Standard, Enterprise, Developer, or Evaluation. To install Integration
Services, run SQL Server Setup and select Integration Services.
Please let me know how do I resolve this issue "Without un-installing Express Edition installed earlier on my machine"
Please help !
Thanks
DP

This is a common pitfall with the SQL Express editions. It cannot co-exist. You
need to un-install the "Express".
What works is having a VM with Express Tools if I you (strangely) need them.
Arthur My Blog

Is it possible to start a project in FCE and finish it in FCP?

Similar Messages

Maybe you are looking for