Is it possible to start slideshow from current picture?

Hi,
is it possible to start slideshow from current picture?
Slideshow in Aperture always start from first picture in album.
There is possibility to select bunch of images and than start slideshow and slideshow will use only selected pictures but this is not what I want:
I want it to start from photo that I curently viewing in full scree.
I *do not want* to:
1. exit full screen
2. going to browser
3. than selecting rest of photos
4. than hitting shift+S for slideshow
I just want to hit shift+S and to slideshow starts right from picture that I curently looking.
I hope I was clear enought
Thanx in advance!

If you mean on the phone (like J2ME apps on a cellphone) then the answer is no. However, if you can run the application on the server, then of course.. you just need a way to send a request to the server (e.g. a softkey button which makes a call to http://your-server/path/yourApplication) which triggers the application and does god knows what.

Similar Messages

Start slideshow from manually chosen slide

There are 50 slides in my project.
How can I manually choose any of these slides and begin the slideshow there (e.g. choosing slide number 14 and beginning the slideshow from there)?
I can do this easily in iPhoto, but it doesn't work in Aperture - when I select, for example, slide 14 and try to start the slideshow from that slide, it always begins only from the beginning (i.e. slide 1).

Have you considered to export your Slideshow as a High Definition Quicktime movie for the presentation? Then you might use iMovie to add chapter markers. However, exporting takes a long time for rendering and will need plenty of aditional disk space.
But if you still have iPhoto that will be the best option for your needs.
Regards
Léonie

Is it possible to watch slideshows from IPhoto on the Apple TV without exporting?

Is it possible to watch slideshows created in IPhoto (including transitions and music) on the Apple TV without exporting it into a movie file?

I don't believe so.

Upon completion of module, is it possible to start over from scratch

I will do my best to explain what I am attempting to do with my Captivate 5.5 created game.
There are four options which the learner will be able to choose from. As soon as one learner is done the next learner will step up to the game and begin. It is possible for learner number 2 to pick the same challenge in the game as learner number 1.
Right now, learner number 1 can pick any one of the four options however, when learner 2 picks the same game that learner 1 chose (without closing and reopening the file) learner number 2 is unable to do anything in that game. Additionally, once all 4 options have been attempted in a single session then the next learner is unable to do anything in any of the 4 options.
My questions:
Is is possible to refresh the game each time a learner goes through an option? (I do have the Loop Project option selected)
This game is going to be played by potentially 500 people in a 2 day span and we do not want to have to close and reopen the game each time a learner has gone through it.
Thanks in advance for amy assistance you are able to provide.
Vince

Thanks! Below I tried to answer your questions:
1. Game consists of interactive widgets (timer widget set at 30 seconds and to count down, basically for show), advanced actions, objects which are being dragged into target areas (Interactive widget), no animations, many variables to guide the user through the various scenarios.
2. Let's say that learner 1 randomly selects option number 2 from the main game screen (no TOC just 4 arrows on a screen which point in 4 different directions and based on which one the learner clicks on they get a different 1 time game). When learner number 1 is done the game goes back to the main screen with the arrows on it (Advanced actions and variables are all reset so they see the same screen which learner 1 saw) however, if learner 2 chooses option number 2 (same as learner 1) they are unable to click or move anything on that slide and the timer widget is at 0:00 (like that game has been completed. Additionally, if 4 learners play the game and each of them chooses a different option (1,2,3, and 4) when learner 5 comes and they choose an option, they are unable to move or click anything and the timer widget is diplaying 0:00.
3. I think that I have answered this however, here is another try at it. Slide 1 picture slide, no actions, slide 2 instructions slide with image and text boxes, slide 3 has a soccer ball in the middle with 4 arrows each pointing to one of the corners of the slide. Click boxes have variables attached to them which will take the user to the game for that arrows word match slide. Each word match slide (4 in total have 8 words with 2 possible matching options. 8 words are soccer balls and the 2 possible matching options are soccer goals. Drag and drop interactive widget). 1 scoreboard slide which shows the score from the slide chosen and the time spent on that slide. 4 Answer slides corresponding to each of the games which are accessed after the scoreboard slide based on a variable from slide 3. These slides show the correct answer and have a click button on them to return to slide 1 and reset all game variables back to 0.
I hope that this helps and I am sorry that it is so wordy!
Vince

Start Up From a Time Machine Backup

I have a 3 year old iBook (10.5.1) and the internal HDD is going bad. Everything is backed up via Time Machine to a "My Book" external HDD. Is it possible to start up from the external HDD? Thank you.

Thomas
You need a bootable backup and Time Machine can't do it.
Carbon Copy Cloner is what you need- not TIme Machine
You can download CCC and use it for free.
CCC will do a bootable backup to your external Firewire HDD. Trash the Time Machine stuff on the HDD and turn off Time Machine.
I recommend you do this immediately before the internal HD goes bad on you.

Start MIDlet from external event (Push Registry)

Hi All,
I am doing a MIDlet on capturing snap. Is it possible to start MIDlet from
outside event (like sms from particular IP/mobilenumber)?
What is the minimum requirement to do so if it is possible?
From,
Nirav

Hi
Do a search on this forum for PushRegistry.
Mihai

First slide on slideshow from an event pictures

I created a slideshow from event pictures, the first slide of the slideshow is not the first picture of the event and I can not change it.
How can I change the first slide of an event on a slideshow?

Welcome to the Apple Discussions. Make a album of the event so you can arrange the photos manually in the order you'd like. You can also save the slideshow settings to that album so you don't need to reset them if you use that album again in the future.
OT

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggsts

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggestions on how to overcome the 99 "Chapter limitation" that IPhoto has? Has anyone heard or tried an app called Vilisoft? I read good things but I am not sure if it will do what I want.
Jim

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

Portege P3500: It's possible to start from USB-stick?

Is it possible to start from usb-stick? i have tried to make a bootable usb-stick , and it really worked on my pc at home , but not on the laptop ..bios settings are ok , as far i know (usb-fdd legacy enable , first boot device fdd)
where is the problem ?

Try to update bios. Even though it has that option does not mean that it will. Make sure in BIOS that legacy emulation is enabled as well. Then connect your USB and turn on the computer. Go into bios and check to see if your USB keystick is located under boot devices, which it should be. Other then that, you might have installed the boot program wrong. CD's etc have a boot.ini file. Basically an ini means initiate. So boot.ini initiates boot process. If this is configured wrong, or doesnt exist on the boot device you are using, it will not boot from the device even if configured in BIOS.

Is it possible to start a web browser from with xterm (X11)?

Hello,
Would it be possible to start a web browser from xterm? I am able to use for example, dbca or netca. But I want to know if I could start a web brower in my xterm. Thank you.

Thank you. Firefox was not found on this redhat linux, I am guessing it was not installed. I did a find / -name firefox but not finding it. I don't think the SA installed GUI on this box. Is there a browser I can use even though GUI was not installed? That is why I am attempting to use xterm hoping to be able to access a brower in xterm. I am using Xming for xterm. Is there something in Xming I can use so I can access the Oracle Database Control Console? I can use firefox from my desktop but the port is block at the firewall and the SA would not open the port due to security reasons. Thank you.

Is it possible to start intel mac in target mode from ppc mac ?

Hello all,
Is it possible to start intel mac in target mode from ppc mac ? If so does using target mode make ANY change at all to the target disk if user doesn't voluntariliy write stuff to target disk ?
Thanks in advance !

Yes, you can, but with some notes. Braby sent some data, I add some other.
Target Mode has two basic roles:
1. to turn a mac into an external drive and/or external optical drive (if it has one, until Air era, all had); you may use this way if your internal optical drive is damaged and you wish to use the optical unit of the other mac; or use it as a simple external disk for backup purposes or else.
2. to boot from a such-booted mac.
#1 is usable with any two macs disregarding whether they are both PPC, both intel, or combination PPC-intel, as the behavior is like any external disk drive or external optical drive.
#2 is impossible if you want to boot the other mac, they must be both intel or PPC, as you cannot use an intel-based mac as a boot mac for the other ppc-mac, and vice-versa.
So said and clarified, you may use, but not if you intend to boot the other one if you wish to use it for various purposes implying boot.

Is it possible to start a remote server from the IDE?

I would want to know if it is possible to start a domain that makes reference to a remote server (from the IDE). On this way I could start and stop the server without loading so much the machine that I use to develop my portal applications. If it is possible how I can do it?

There is no personal Information on a crash Report unless you put something personally identifiable in the comment field. For example, here is a crash report I had on my machine awhile back: https://crash-stats.mozilla.com/report/index/bp-1de8924f-7068-4702-a410-89c492121220.
You can go to about:crashes in your address bar, and click on the report to view the info there to satisfy yourself that there is nothing in the report. But submitting crash reports is very useful because it gives us the ability to view what crashes are plaguing our users and what we need to fix.

Suppose I have two identical laptops loaded with my current time machine back up. I take one on a trip and update it with time machine but leave it. I come back w time machine HD and connect the home laptop, will it just update or start over from scratch?

Suppose I have two identical laptops loaded with my current time machine back up. I take one on a trip and update it with time machine but leave it behind. I come back with the time machine HD and connect it to the home laptop, will it just update or start over from scratch? is there a way to make it just update it?

You might have better luck using a clone.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Commonly Used Backup Methods

Display three prior months starting from current month

Hello All,
I came across the requiremnt:
The report looks like:
2014-Jan
2014-Feb
2014-Mar
2014-Apr
2014-May
2014-June
2014-July
2014-Aug
2014-Sep
2014-oct
2014-Nov
2014-Dec
A
122
233
233
233
233
233
233
233
233
233
233
233
B
22
33
33
33
33
33
33
33
33
33
33
33
C
33
33
33
33
33
33
33
33
33
33
33
33
D
333
3333
3333
3333
3333
3333
3333
3333
3333
3333
3333
3333
The requirement is to display the prior 3 months ,current month, next 3 months.
Assume that current month is SEPTEMBER, the report should look like:
2014-June
2014-July
2014-Aug
2014-Sep
2014-oct
2014-Nov
2014-Dec
A
233
233
233
233
233
233
233
B
33
33
33
33
33
33
33
C
33
33
33
33
33
33
33
D
3333
3333
3333
3333
3333
3333
3333
Share your thoughts.
Thanks

Hello All,
I got this resolved using the below formula to get either prior 3 months or the next 3 months from current date:
3rd month from current date:
=LastDayOfMonth(RelativeDate(LastDayOfMonth(RelativeDate(LastDayOfMonth(RelativeDate(LastDayOfMonth(CurrentDate()); 1));1));1))
Prior 3rd month from current date:
=ToDate(FormatDate(RelativeDate(ToDate(FormatDate(RelativeDate(ToDate(FormatDate(RelativeDate(ToDate(FormatDate(CurrentDate();"MM/yyyy");"MM/yyyy");-1);"MM/yyyy");"MM/yyyy");-1);"MM/yyyy");"MM/yyyy");-1);"MM/yyyy");"MM/yyyy")
and used these objects to restrict my date field(date object between "Prior 3rd month from current date:" and
"Prior 3rd month from current date:"
Thanks,
Vijay

I want to play music from my playlist when I am using slideshow of my pictures in Ipad, but I can only choose ONE SINGLE song, and it continuously repeates itself. Is there a way to play the complete playlist while showing my pictures?

I want to play music from my playlist when I am using slideshow of my pictures in Ipad, but I can only choose ONE SINGLE song, and it continuously repeates itself. Is there a way to play the complete playlist while showing my pictures?

You can start the playlist playing in the iPod app and then switch into the Photos app and start your (non-music) slideshow - as you've found out you can currently only select a single track in the Photos app. Whether that will change in iOS 5 I don't know, but you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

Is it possible to start slideshow from current picture?

Similar Messages

Maybe you are looking for