Is it possible to stop auction earlier than scheduled?

Dear SAP gurus,
We are using SRM server 550 and SP08 and we are using LAC. As a purchaser, is it possible to stop auction earlier than scheduled? I see one stop button there, but if i click stop button before the time is up, the system just give me message that the specified time has not been reached.
Best regards,
John.

Hi John,
this is the standard behaviour. An auction cannot be stopped before the scheduled
end date. Only option is to make the time period longer, but not shorter. That's the
current standard with one has to live with.
Cheers,
Claudia

Similar Messages

  • Eyetv 2.4 wakes up earlier than scheduled

    I am using Eyetv 2.4 software, and the awaking function is behaving unusually. Whenever the software is open, but the computer is asleep, it wakes up the computer about 30 minutes earlier than scheduled, though recording starts at the right time. And so if i have kept my computer to sleep after 15 minutes of inactivity, the computer goes off to sleep before recording starts and does not wake at the right time. Somehow it does not happen when it has to open the software to record. And so if i have multiple recordings scheduled at night, it wakes up properly for the first one, records and then computer goes to sleep. Then it wakes earlier for the second recording, and before recording can start it sleeps and misses the second recording.
    The last version of eyetv I used was 2.3.1 and this issue was not there. Anyone else having the same issue with version 2.4?
    20" Intel imac   Mac OS X (10.4.9)   2 GB RAM

    I didn't experience this waking issue (but didn't have any schedules this week) however I noticed a serious performance drop in the quality of video on my 1.25GHz G4 (loads of digital noise visible and was seeing regular SBOD under v2.4 for no apparent reason) not sure if you'd notice this performance hit on a Core Duo machine. 
    I've reported these issues to Elgato and rolled back to using version 2.3.1 which works just great for me. (I don't need tv compatibility anyhow).
    regards
    mrtotes

  • Posting not possible (Value date earlier than capitalization date)

    Hello , we are getting the error shown below. I'am not sure where to go to fix this can any offer any advice.
    Thank you
    Posting not possible (Value date earlier than capitalization date)
    Message no. AA 322
    Diagnosis
    Asset 000000040048 0000 was first capitalized on 20080831.
    You cannot post to an asset that was not yet capitalized.
    Procedure
    You have the following options:
    Change the asset value date of your posting.
    Capitalize the asset by posting an acquisition.

    Generally this message will come , if you have created a asset  with a capitalization date say   31/08/2008 and you are settling a Internal order for last period say 07 on with a posting date earlier than capitalization date , say 15/08/2008.
    The System will not allow you to post because the value date cannot be earlier than capitalization date.
    Change the value date to later than capitalization date and post.

  • Posting not possible (Posting yr.earlier than capitalization yr.)

    Hi gurus
    while posting write up through ABZU ; I am getting an error message that posting year is earlier than Capitalization year Message No: AA328.
    When i checked the group asset first acqusition on date was in future.
    I donot know how it was happen.
    Please give suggestion to solve this issue .
    Thanks & Regards
    Binoj M D

    hi
    Got the solution. Screen layout changed.
    for that group asset and now it is working fine.

  • Asset Acquisition with Asset Value Date earlier than GI post.date

    Dear all,
    I am curently using SAP ECC 6.0. We are not creating AuC assets but directly capitalizing assets from investment accounts.
    If a material is issued with a date in March and i try to acquire it with asset value date from a previous period, for example in February, the system doesnt issue any message and lets me post the transaction. The accountants claim that this hadnt been possible in the earlier version of SAP 4.6 that we had been using and that the system had issued an error message - "Posting not possible (Value date earlier than capitalization date)"
    The accounting logic is that you cant capitalize an asset with a date earlier than the date when it has been in use, i.e. in our case it`s the date the material has been issued from the warehouse.
    Does someone know what logic does SAP follow in this case - and if i can set a validation control that will check and compare the two dates?
    Any opinion would be appreciated
    KR
    Severina Koleva

    We are on ECC 5.0 and we do get that message, but it is a warning.
    AA348...
    that said, you can setup a validation using GGB0 and asset accounting

  • Your transaction date is earlier than its parent transaction

    Hi,
    WE just upgraded from 11 to 12 and when our end-user goes in to receiving transactions he get's a message: Your transaction date is earlier than it's parent transaction. Cause: You tried to enter a transaction date that is earlier then the parent trandaction date. In R11.5.10.2 we would get a message but it would allow us to hit OK. This only happens when you try to "accept" something that was "received" the same day. If the user goes in and sets the transaction date with minutes and seconds, they do not receive this message.
    Is there some way to get it to prompt the way it did in 11.5.10.2 where we could continue on?
    Thanks!

    Hi
    This user exit doesn't work for Transaction ME51, It doesn't even stop in there.
    I need a user exit before saving the PR so I can check the delivery date.
    Any other suggestions?
    Thobile

  • Can anyone please help? Every time I start up my imac OSX 10.6 desktop my Aperture 3 programme opens up without being requested. Is it possible to stop this from happening and only open by using the desktop icon? Thank you for any assistance.

    Can anyone please help? Every time I start up my imac OSX 10.6 desktop my Aperture 3 programme opens up without being requested. Is it possible to stop this happening and only allow Aperture to open by using the desktop icon? Thank you for any assistance anyone may be able to give.
    Best regards, John.

    because there is absolutely no mention in my System Preferences of either Users & Groups nor Start Up Items.
    John,
    William's solution was much easier - just for completeness sake: The preferences panes to edit your startup items moved between the Mac OS X updates: I forgot that the "Users&Groups" preference pane used to be called "Users" in Mac OS X 10.6; it is the panel that you use to create new User accounts; and earlier systems had a separate preferences panel "Login" to enable and to disable the applications that are launched at login. Both are now combined in "Users&Groups". Sorry for sending you on a wild goose chase with the wrong Preferences panel.
    Regards
    Léonie

  • Is it possible to stop the continual redraw

    Hi I was wondering if it was possible to stop Lightroom continually redrawing images, especially when switching to Develop mode.
    I have tried rebuilding all the 1:1 Previews - this seems to help the redraw problem in Library mode - both for thumbs and when double clicked - but not in Develop mode.
    It doesn't seem to make sense that when I select a photo in the Library thumbs mode, then hit D (for Develop), I see the photo enlarged and clear for a split second, then Lightroom starts to redraw it, and eventually produces the image I saw for a split second. It's like it has the information but doesn't use it. This sometimes happens when in "Fit" view, especially with heavily cropped photos, and nearly always seems to happen in "1:1" view.
    I have also tried optimising catalogs - this seems to make little or no difference.
    Computer setup: early Intel iMac Lightroom 2.2, OS 10.5.6, photos on external drive, catalogue on iMac, Canon Raw files (.CR2) about 20 to 30 Mb each,
    LR Preferences:
    file extension:dng, jpeg preview:medium size, compressed (lossless) ticked, embed original raw file not ticked, Cache on imac, max size 12 Gb (should this be bigger maybe?).
    Catalogue settings: Standard Preview size: 1680 pixels, Preview Quality: High, Automatically Discard 1:1 Previews: after 30 days.
    Many thanks for any help with this

    Well thanks for the quick answers! At least I won't be wondering if there's some setting I can change.
    Of course I understand why the image should show changes made in Develop mode in "real-time" - and, in fact, that works fine with no delay, if I increase the contrast, for example.
    What I don't undestand is why without making any changes, on opening the picture in Develop, it shows the picture, then it goes all blocky ("big pixels") for a few seconds, then it goes back to normal

  • Backing up older macs earlier than v10.5.7 on Time Capsule?

    Is it possible to back up an older mac earlier than Mac OS X v10.5.7 onto the time capsule?  And if so, how?

    As in USB to USB and then the mac will recognise it as an external harddrive? 
    Nope.. USB cannot use a TC as external..TC is now and forevermore a network drive. If you want a USB drive go and buy one.. do it.. do it now.. they are cheap, fast and reliable.. much Cheaper, much Faster and much more Reliable than a TC.
    Or can I use an ethernet cable?
    Yes,, cable, now and always forevermore.. that was the point of the previous post. The only decent network connection is ethernet. Wireless is a trouble prone, difficult heap of voodoo gremlins. To this day it is many times slower and many times worse than ethernet.

  • Security updates for anything earlier than ios4

    straight question.
    have apple stopped doing security updates for anything earlier than iOS4.
    my ios4 3g takes 4 seconds to load sms , thinking of downgrading but worried about security.
    thanks !

    Each OS update contains latest security updates. They never add them to old OSes as the update to the new OS is the security update as well. They don't do patches to just old OSes.

  • Is there a way to download older podcasts (i.e. - earlier than the latest podcast episode)?

    Is there a way to download older podcasts (i.e. - earlier than the latest podcast episode)?

    Hi Puffball2015,
    The Podcasts application for iOS does make it possible to download podcasts that are not the latest episode. See this article for how to select podcast episodes for download -
    Podcasts app for iOS: Stream, download, and subscribe to podcasts - Apple Support
    Specifically this section -
    Downloading
    If you download a podcast episode, a copy of the episode is stored on your iOS device so you can play it anytime you like even if there's no Internet connection.
    Browse or Search for a podcast.
    Tap a podcast to view details.
    Tap the download icon next to an episode.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Some of the entries in my address book show birthdays one day/year earlier in Ical. I cannot change this except by putting in the birthdays a day/year earlier than they are. Why is this happening only for some entiries and not others?

    Some of the birthdays I have entered in Address book appear in my Ical one day and one year earlier than the date I have given. Eg. I have entered a birthday in Address book as 23 March 2011 and it appears in Ical as being on 22 March 2010. Other names have no problems. There are only some that do not appear with the correct date and year. Why is this?  Has anyone found how to correct this strange problem?  I have Time Zones ticked.
    Bronze2011

    I'm having this exact same problem, but it's doing it with a bunch of birthdays. I also did 0001 when I didn't know the birth year, so I went back and did a more current year, but they still aren't showing up where they should be...or at all. It's completely bizarre.

  • Interactive Report - is it possible to stop a column being hidden?

    I have an interactive report region where i have a column that has a link that performs an action, in this case it links to a screen where the user can then add a row. I want to make this column mandatory and not let the user hide it. I can remove other functionality, but cant seem to control the hide/show functionality.
    anybody got any ideas?
    craig
    [oracleapplicationexpress.com|http://www.oracleapplicationexpress.com]

    Dear Hemanth,
    To your question:
    "Is it possible to stop a campaign from being cancelled if it has purchase orders attached to it, using standard functionality".
    This might be possible with a BADI implementation. In enhancement spot CRM_MKTPL there exist a BAdI CRM_MTKPL_OL_OBJ where the interface method CHECK_BEFORE_DELETE is offered.
    Regards,
    Anik

  • Deliveries dropping early than allocated schedule line dates

    Hi Gurus,
    I have a Scenario, where the deliveries are dropping early than the delivery date assigned in the schedule lines of sales order.
    Example, Order received on 14th with one line item and schedule lines allocated the delivery date as 19th. But for some reasons the deliveries are dropping early on 16th.May I know what might be the reasons.
    Thanks in advance,
    Sree

    Hi,
    Check in the below link.
    relation between VBEP-ETENR and LIKP-VBELN
    Thanks,
    Sree.

  • Calendar invites from Outlook(pc) come as .ics, can't be deleted & are 3 hrs earlier than the meeting time!

    Please help!  This is so crazy complicated.  I believe the problem is either 1) a faulty phone, or 2) a bug in iOS5 for outlook calendar if you aren’t on an exchange server (please someone tell me iOS6 will fix it!). 
    I bought my nanny an iPhone.  She does not have a mac and she does not sync to a pc.  She just uses the phone.  She does not have an exchange server – she is just AT&T with an optimum online email account.  I use a pc and Outlook 2003 (yes, I know it’s old, waiting to buy a new laptop and upgrade at once).  I manage my children’s very busy schedule on this calendar and I invite my nanny and my husband to most appointments.  I am on an exchange server for this calendar (my personal).  I also use an iPhone and iPad and have servers hosting my email accounts.
    When I invite my nanny to appointments on my outlook 2003 pc calendar she receives an .ics file instead of a nice looking appointment with the name of the appointment.  If I invite myself at work (also on a server, PC and on my iPad and iPhone) or my husband (uses an iPhone 4S), neither of us get .ics – we get a normal calendar meeting.  We can open and accept and delete, etc.  Since we are both on exchange servers (not the same ones) I think this must be the first problem – why she gets .ics and we don’t.  When she opens the meeting she can ONLY accept.  There are no options for Maybe or Decline.  When she accepts – get this – it adds the meeting THREE hours earlier than the actual time!  Yes, we’ve checked her time zone settings.  I have also restored the phone.  It doesn’t help.  She also can’t decline the meeting ever.  It’s stuck on her phone.  When I delete the meeting, it doesn’t delete from her account.  She now has a test that we added as a recurring appointment on Sunday morning that will be there forever!
    THEN I tested a few other things.  I invited her NOT by sending the meeting directly from my outlook and PC but by opening the meeting once added on my iPhone and on my iPad and inviting her.  When I do that, they get added at the CORRECT time BUT she still has no option to decline and she can never delete these either.  When I delete from my PC, my iPhone and my iPad – they all stay on her iPhone.
    NEXT… I tried sending her a meeting from my work PC which is the newest version – Outlook 2010.  Same thing, came in as .ics, no ability to decline BUT… the time added correctly!  This is from an exchange server.
    I’ve read about other people having this issue but they have one appointment out there that they can’t delete.  This is 20 a week I’m sending her… and the time zone changing – that’s just crazy.  I haven’t found anyone with that issue.  Could we really be the only people out there that use a lot of meeting invitations – Outlook to iPhone and they don’t know it’s a bug?  Or do I have some funky setup on her phone?  If I add her to my server will that fix it?  Or does she just have a faulty phone?  Please help!

    I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work.  So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.

Maybe you are looking for