Is it possible to strengthen the WIFI signal on Z2?

Hello everyone. Z2's WIFI recieving is very bad. I mean the signal recieved by Z2 is very poor, I have to be very close to the router in order to get a good signal. When I get far from router - 4or5 meters - the signal becomes poor . I don't loose the signal but it becomes so poor. In comparison my wife had a samsung phone but the signal on her phone still strong. She even can access other WIFI signals using her phone, while I can't cause my phone doesen't even see the WIFI signals. Is there any method or any update to solve this?
Thanks in advance.

I've tried the app WIFI analiser. It looks like nothing has changed . These are some screenshots.
As the screenshots show the app is for knowing which channel is better for the connection. Thank you so much uliwooly.

Similar Messages

  • I have a new HP Officejet 6500A plus.  I cannot get it to connect to            my Airport Extreme V5.6.  It see the wifi signal but Fails on "Filtering" and possibly the channel.  Does anyone know how to reset or reconfigure filtering

    I have a new HP Officejet 6500A plus.  I cannot get it to connect to my Airport Extreme V5.6.  It see the wifi signal but Fails on "Filtering" and possibly the channel.  Does anyone know how to reset or reconfigure filtering and channel on the old airports?

    This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
    (PS Everybody please make noise on this one so apple comes up with a solution.)
    < Edited by Host >

  • HT1178 I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN o

    I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN on back of Airport Extreme.
    Instructions do not mention connection to BT Hub and the BT modem has only one output which you dicsonnect from Hub and connect to airport extreme leaving. Once you do this Hub has no signal.
    How do I rectify
    Paul

    you can also set up the Airport extreme to extend the wireless by hitting the wireless tab in the airport menu then click the drop down menu to select extend
    Apple's "extend" function is a proprietary setting that was designed to only work with other Apple routers.
    It would be extremely unlikely that this setting would work with a BT product, or any other manufacturer's product for that matter.
    But, I haven't tested this with a BT product...and I suppose anything is possible.
    Still, I would be extremely surprised if this worked.
    The AirPort Extreme might "join" the BT network if you try this......but the AirPort does not provide any additional wireless signal coverage when it "joins" a wireless network. In fact, it really does nothing when it "joins" a network except enable the USB port.

  • How can I strengthen my wifi signal to my Apple TV?

    I'm using a Time Capsule / wifi base station in my office upstairs to create my wireless network.  In the basement, I have Apple TV connected to our wireless network but when I stream movies, the connection will drop after a bit.  Connecting them with a long cable is unfortunately not an option.
    Any ideas I can do to strengthen the wireless signal when the 2 points are not on the same house floor?

    Move the Wi-Fi access point or connect a second Wi-Fi access point to an Ethernet connection closer to the ATV.

  • TS1398 Is it possible to lose the wifi settings so that you can't connect?

    Is it possible to lose the Wi-Fi settings so that you can't connect?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iPhone 5 connects to wifi but shows one bar on the wifi signal meter but my iPad2 and Macbook Air both show full wifi bars when all three are side by side next to my apple router. Do I have an antenna problem with my iPhone 5?

    It appears that my iPhone 5 has a wifi signal reception issue. I only show one bar on the wifi signal meter even when I an next to the router.  Both my Macbook Air and my iPad2 show full wifi signals at the same time.  Rebooting the Apple router and each device results in the same meter readings. 

    Does this occur with any Wi-Fi connection? Or only a specific one?
    If it occurs with any Wi-Fi connection, take it to Apple.
    If it is only occurring with a specific Wi-Fi connection, it is an issue with that Wi-Fi connection.
    Try the following, it may help:
    Settings > General > Reset > Reset Network Settings.
    Forget the Wi-Fi connection on the iPhone then reconnect.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).

  • After updating to iOS 8.3, seem like the wifi signal got worst. The screen rotation is still as bad

    sseem like the updates which were pushed didn't do any much hel, the wifi signal was even weaker than before, at times I will be totally disconnected from my home wifi.
    And the screen rotation... i don't see any difference to it.

    Mine won't even rotate now. So I have not scientific calculator. Apple support recommends backup and restore.
    If the screen doesn't rotate on your iPhone, iPad, or iPod touch - Apple Support
    iOS software used to be so bullet proof, but iOS 8 is a dog. It's like working with windows. I wish I could downgrade. My wife's phone is at iOS 6 and I'm leaving it there. it works better than mine.

  • I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

    I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

    Do you experience the same issue on other WiFi networks?
    Do any other iOS devices experience the same issue on your network?
    Make sure you follow all steps provided in the article below:
    iOS: Troubleshooting Wi-Fi networks and connections

  • I bought the Airport Extreme because I thought it would increase the range of the WiFi signal in my house. I have a DSL modem (also Wifi) and there are parts of the house that do not seem to have a strong Wifi signal.

    I bought the Airport Extreme because I thought it would increase the range of the WiFi signal in my house. I have a DSL modem (also Wifi) and there are parts of the house that do not seem to have a strong Wifi signal. The Airport Extreme does not seem to be increasing my Wifi signal strength? Any thoughts on what I could be doing wrong? I am able to connect to it, etc. Just thought the strength would be better.

    The broadcast power of all wireless routers and devices is limited by law.....and all manufacturers run their routers full blast.....so the relative signal strength of wireless routers from one manufacturer to another will tend to be remarkably similar.....despite the fancy advertising claims.
    You may want to consider adding another AirPort Extreme to "extend" the signal strength in your home. If you decide to do this, the "extending" Extreme would normally need to be located at a point that is approximately half the distance from your "main" AirPort Extreme and the general area that needs more wireless coverage.

  • The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

    The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

    The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

  • It is possible to change the Inhibit signal to active high (7344 controller)?

    Normal the controller 7344 generate an Inhibit signal active low. We can receive this signal from the UMI 7764, and send it to the motor drive.
    We have a Nanomotion drive type AB-5. For that type of drive the is the Enable signal that is active low. It is possible that this generate a problem of dialogue between the controller and the drive? I means that it is possible that a signal that the controller explicite like inhibit is interpretated by the drive like enable and vice versa. If it is true, how is possible to swap the inhibit signal to active high?

    You can set the polarity of the inhibit signal in MAX. Select the Axis Settings of your 7344 settings. To the lower right hand side there are the options for the inhibit output polarity.
    Best regards,
    Jochen Klier
    Applications Engineering Group Leader
    National Instruments Germany GmbH

  • I have a new comcast modem i have connected to Time Capsule with cable, TC in double NAT. As when I tried it in bridge mode I cannot use Sonos, the units will not connect to the wifi network? I thought Bridge mode would make the wifi signal better??

    I have the TC connected to the comcast modem, with TC in Double NAT mode. I set up the sonos music players ok. But I read that to incresae the wifi signal the TC should be in Bridge mode. Then I cannot get any of the Sonos units to connect to the wifi network.
    So two questions, does the Bridge mode give a better wifi signal then double NAT?
    Why will sonos not connect to the network when in Bridge mode?

    A PC can have more issues connecting than a Mac.
    But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
    If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
    Important thing is to get access to the TC.
    The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
    http://support.apple.com/kb/DL1482

  • TS1398 My macbook is connected to the internet, but my iPad just stopped connecting.  I have "forgotten" the network and restarted, and I have "turned off" the iPad.  It still says it's not connected to the internet, but the wifi signal is strong.

    My ipad was working, and then just said it wasn't connected to the internet.  I have forgotten the network and rejoined, I have turned off the ipad (slid on the arrow), and still no luck.  The macbook is working with no problem.  Help.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have changed to AT&T U-verse, which has a new modem and router combined.  Safari 5.1.10 will not recognize the wifi signal, but Foxfire will.  What settings do I need to change on Safari?

    I have changed to AT&T U-verse, which has a new modem and router combined.  Safari 5.1.10 will not recognize the wifi signal, but Foxfire will.  What settings do I need to change on Safari?

    Hello SalsburgD
    The first thing I would check is to make sure that the router is using the recommended settings to get online. Another troubleshooting step is to create a new Network Location and then join your network to see if that changes things. 
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Using network locations (Mac OS X v10.6 and later)
    http://support.apple.com/kb/ht5289
    Regards,
    -Norm G.

  • HT201210 I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

    I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

    Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.

Maybe you are looking for

  • How Can i De-authorize computers from my itunes account

    as people may know it is only possible to have 5 computers authorized to play itunes music however how can i de-authorize computers i don't have anymore, or computers that been restored back to factory settings. as i have 4 registered but only have o

  • Speed negotiation settings for a 10G interface

    HI, We have the following setup: 2 ports of CISCO 6509(also has xfp long range)  switch connected to 2(XAUI) ports of SPARC box T5220. When the SPARC box goes for a reboot, the link is UP at XAUI while ports are down at CISCO end. However either of t

  • Safari doesn't display an object with MIME type video/mp4

    So, I've got a little hiccup here. I put together a CV in html with samples you can click to bring up. Now, I don't make any claims to professional geekdom, but I try to be fairly html savvy, and since I'm sending this to the college IT guys, I want

  • Reset monitors all at once with a script

    I am getting numerous SCOM Heath Monitor alerts for the following 2 conditions: AD Domain Availability Health Degraded AD Site Availability Health Degraded I have searched the internet for scripts to reset them each all at once. I have found a couple

  • The Web Management Service service terminated with service-specific error %%-2147483640,

    We've been able to successfully, automatically, deploy our MVC and WebApi to IIS7.5 on Win2008 R2, for some time now.  Just this week the MSDeploy stopped working.  The System event log shows this error when attempting to restart the Web Management S