Is it possible to switch between two BOM usages in the order?
Hello Experts,
We have created two maintenance BOM's say Structural BOM - Usage Plant maintenance & Spares BOM - Usage Spares for a technical object.When I am creating an order,in the components list I can only list the BOM with Usage plant maintenance.Is it possible to switch between the usages?I need both the usages for selecting materials in the components tab.
Thanks,
Ashraf
We are on ECC 6.0
Regards,
ashraf
Similar Messages
-
In our office we have a screen at the front desk that runs a PP slideshow showing welcome messages to guests arriving.
SharePoint may not be the solution, but the overall objective is to find a way to have a library of X number of photos (say the library size is 30 images) and a separate library of X number of welcome messages (usually ~5 images).
We want the slideshow to randomly pull 5 images from the 1st pool and then play the images in the 2nd Pool.
Let me know if you have heard of a solution similar to this. Thanks!Hi Twirlz03,
According to your description, my understanding is that you want to display teo picutre libraries in a picture slideshow web part in SharePoint 2010.
By default, one Picture Slideshow web part only display images fron one specifical picutre library, it is unable to apply for multiple picture libraries.
You can try to utilize Content Query web part to aggregate picture items from the site collection or site. However, you mean that you want the slideshow to randomly pull 5 images from first library and then play the images in the second library, I’m afriad
that it is hard to achieve it.
More information about aggregating picture items , please refer to section 4 of the link below:
http://blog.vgrem.com/2013/04/27/beyond-the-slideshow-web-part-capabilities-in-sharepoint-2010/
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
As a beginner, I need help figuring out how to build a simply VI that uses boolean logic to switch between three different screens. I need a "Home" screen, the next screen which has a button to go back "Home" and a third screen which has two buttons to go "Home" and "Previous Screen". Can someone help me with a simple block diagram?
Hi,
Or put the data in three tab controls. The tabs itself are hidden. The
program switches between the tab sheet if one of the buttons is pressed.
The buttons are best not copied, e.g. the same buttons are used in every tab
sheet (buttons hover above the tab, a black shadow will apear). If the first
sheet is shown, button 2 and 3 are hidden, sheet two: only button 3 is
hidden, sheet three no button is hidden.
Showing the tabs allows the user to choose the views directlly. The button
logic is not needed anymore. But you'll have to live with a simple tab
sheet, instead of a fancy button system!
Regards,
Wiebe.
"Jason R" wrote in message
news:[email protected]...
> Another solution if you want to avoid property-node hell...
>
> Divide your screen into 1/4ths. That is, make your FP 4x larger than
> your desktop.
>
> Place screen 1 on the upper left quadrant.
> Place screen 2 on the upper right quadrant.
> Place screen 3 on the lower left quadrant.
> Screen 4 (lower right quadrant) is unused.
>
> Disable the ability to scroll at run time.
>
> As the user clicks buttons, use the properties of this vi to move what
> the user can see on the front panel.
>
> Cheating? yep. Easier? yep.
>
> Hope this helps! =)
>
> btw - be sure not to update the FP controls when they are not visible,
> or this will eat processor cycles.
>
> Sincerely,
> Jason G Richmond
> Project Engineer II and LVAAD Instructor
> VI Engineering
> [email protected] (domain should be vieng.com (no A's))
>
>
> missileman wrote:
> > Is it possible to use booleans to build a VI that uses buttons to
> > switch between screens (3 only) while the other screens disappear?
> >
> > As a beginner, I need help figuring out how to build a simply VI that
> > uses boolean logic to switch between three different screens. I need a
> > "Home" screen, the next screen which has a button to go back "Home"
> > and a third screen which has two buttons to go "Home" and "Previous
> > Screen". Can someone help me with a simple block diagram?
>
> -
How do I quickly* switch between two Skype account...
I have a need to be able to quickly* switch between two Skype accounts on my Windows 7 desktop computer.
Both accounts have high-security difficult-to-remember and hard-to-type passwords.
Many products have a facility for doing this, remembering recent account/password combinations, or having linked accounts.
Does Skype have a way of doing this?
And if it doesn't, how do I request it get one be developed?
I use a password manager, LastPass, but of course Skype isn't a browser so it doesn't work with Lastpass.
* "Quickly switch" means without switching computer sign-on accounts and without re-typing the high-security difficult-to-remember and hard-to-type passwords many times per day.
I understand you're all volunteers. Thank you very much for your efforts on this.
- Keith
Solved!
Go to Solution.This can be done by setting up an another Skype client in a separate directory and with a shortcut containing the extra /datapath, /removable and /secondary switches.
http://community.skype.com/t5/Windows-desktop-client/Why-did-Microsoft-have-to-go-and-ruin-Skype-lik...
For your purpose you can make use of a copy of Skype.exe of the already installed Skype application. -
How to switch between two query in Web templete.
Hi all,
Here i am facing problem to switch between two query in web template by using one 'table' web item. is there any way to use hyperlink 'SAP_BW_URL' and we can switch to query. here i am using these HTML code..
<table><tr><td class="SAPBEXBtnStdBorder" cellspacing="0" cellpadding="0" border="0"><tr><td>
<table><tr><td class="sapbexbtnstd" ><A href="<SAP_BW_URL cmd='reset_item' item='table_data' query_ID='ZSD_ZSD_M01_Q20' apply_cmd_on_target= "X">" >Switch to other query</A></td></tr></table>
but i am not getting correct functionality.
please help me to solve this problem.
I know the best way to say thanks in SDN.
thanks
Kiran PatelKiran,
Use the web api reset_data_provider as links or in select option in HTML.
Onchange event of this select option should call JAVASCRIPT method and
this in turn resets the current dataprovider to your concerned one.
How to change graphs:
The graph item has the default data provider:
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="CHART_1"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CHART"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="TMP_CHART_DATA_HANDLE" value="IIP_49MOXB0UVNOMM6JOZMZU7QO21"/>
ITEM: CHART_1
</object>
So if you change the DATAPROVIDER_1 using RESET_DATA_PROVIDER to your concerned DP, this changes chart as well !!
Please use this method and refer to sample code for Onchange Event on SELECT OPTION:
<HTML>
<HEAD>
<script>
function callDP() {
if(document.forms[0].dp.value == "1") {
//form your URL here..
url = SAP_BW_URL_Get() + "&CMD=RESET_DATA_PROVIDER&DATA_PROVIDER_1=..&...";
SAPBWOpenURL(url);
//or docuemtn.location.href = url..
//etc..
</script>
</HEAD>
<BODY>
<form>
<select name="dp" onChange="javascript:callDP();">
<option value="1">1</option>
<option value="2">2</option>
</select>
</form>
</BODY>
</HTML>
HOPE THIS HELPS !!! -
White box appears while switching between two desktops
Hello all,
Since few weeks I have a problem when I switch between two Desktops. Everytime I switch between them a white box appears in the left corner of my screen (see screenshot).Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Switching between two languages
Is there any easy way to switch between two languages - Pingyin and English. At the moment, I have to go to settings and change the language and then go to Keyboards and delete Pingyin.
iPhone 5s with IOS 8.1.1.
Thanks.That's what the "globe" key is for.
-
I received a suggestion that I contain the two parts (grey level ficker and signal capture) in seperate while loops and use a local variable to pass a control to the measurement part from the flicker, with the control triggering the true statement of a case structure inside of the measurement while loop. In each of the cases (both vi's are listed below) the picture box stops swithing between the two grey levels while the measurement is being taken by the DAQ. In my application, I have a photometer taking continuous measurements and sending a proportional voltage signal to the DAQ input. If the picture box (which is what the photometer is measuring the br
ightness of) does not switch back and forth between the grey levels while the DAQ is sampling the incoming signal from the photometer, then the photometer is putting out no signal. No grey level switching, no signal. So the DAQ ends up measuring a flat line. Does anyone have any ideas as to how I can fix this, please try nd run my vi's before you make suggestions, just to see what is happening. Also, if you have a solution, give it to me in remedial form, if you can. I am new to labview.
Thanks for all your help.
Attachments:
Acq_N_Scans_to_File_(wdt)_with_flicker_2while.vi 127 KB
Acq_N_Scans_to_File_(wdt)_with_flicker.vi 127 KBI apologize, one of the vi's that I sent was incorrect. I did, more or less, the same as the example you gave me. Like the example you gave me, it stops switching between grey levels momentarily while the DAQ captures the signal. Is it possible to have the two run simultaneously? I will attch the vi that I intended to send, and would appreciate any further ideas you may have on how to fix the problem.
Attachments:
Acq_N_Scans_to_File_(wdt)_with_flicker_2while.vi 135 KB -
Can you transfer files between two user accounts on the same macbook pro?
Can you transfer files between two user accounts on the same MacBook Pro?
Specifically, I used the Migration Assistant to move music and photos from my old PC to my new MacBook.
Somehow, I missed the fact that it was creating a new user account when it was doing this. So none of music and photos are in the user account I originally set-up. Instead, all these files are now in a different account.
I'd like to consolidate all my files on the one user account and delete the other one.
Is this possible and, if so, how do I do it?
Thank you.you can crop files from one account to another using the Public Dropbox which every user account has. Log into the user that has the files you want to move, then drag the folder you want to the new users' dropbox:
I suggest a small scale test on a few files first before moving gigabytes of files. -
I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.
There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP -
Can I have a Face Time conversation between two Apple devices using the same Apple ID?
Can I have a Face Time conversation between two Apple devices using the same Apple ID?
Yes, you can, but the two devices can't have the same e mail address associated with both. Each, device needs its own unique e mail ADR. In your case, the iPod can call your iPhone if you use the phone number, but the iPhone can not call your iPod because it must use the e mail address, and if the email address is the same on both, the iPhone will think it's calling itself, so the call will not go through.
-
Using the same photos and music between two user accounts in the same Mac
Hi,
I think this question might have already been asked in the forum.
1. I have one MacBook Pro and two user accounts (One for me and one for my wife)
2. We are having two seperate iPhones with seperate AppleIDs
3. We want to maintain the apps / calendar / mail / reminders / contacts as seperate - Through iCloud (Seperate Apple ID approach) - All this is fine
4. All we want to have it shared is the Music files and the Photo library without duplicating
I have tried the shared folder approach for the music and having the iTunes point to that directory for the libary location in the preferences but unfortunately if she adds a folder to the library mine does not get updated unless I do a add folder to library and vice versa.
Whats the best way to deal with the Photos / Music sharing between two user accounts on the same mac
Thanks
ShasTo give other users read-only access to your iTunes library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
To give others selective access to your iPhoto library, you have the option of using iCloud Photo Sharing, if the privacy implications don't bother you. The images will be stored temporarily on Apple servers.
If you want to give full read/write access to more than one user, see the support articles linked below.
iTunes: How to share music between different accounts on a single computer
iPhoto: Sharing libraries among multiple users
There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions. -
Communication between Two WebLogic instances on the same machine
Hi,
We're having a problem with communication between two copies of Weblogic on
the same machine. They are configured with seperate ports (regular and SSL).
Independantly, they run fine. I can access EJBs running on either of them.
The problem is that a bean in one of them has code which attempts to access
an EJB on the other one. The procude fails when trying to obtain the initial
context. This same code works if compilied independantly of WebLogic on the
same machine.
Are there any known issues regards communication between two running
instances of Weblogic on the same machine?
Thanks in advance,
Randy Yarger
marchFIRST
[email protected]Thanks for the prompt reply.
There is one IP address (internal address 10.227.1.34) one the machine. WLS1
is set up at ports 7001 and 5133. WLS2 is setup at ports 7004 and 7005.
When WLS1 attempts to obtain a context to WLS2 with the URL
t3://10.227.1.34:7004/ it pauses for a long period of time. Running truss
on the both WLS processes shows communication occuring between the two
followed by long periods of silence. Finally WLS2 spits out the error
ConnectionException[7001,7001,5133,5133,7001,7001] (paraphrased, I can get
the entire error if it would help).
After another long pause, WLS1 quits trying with the error 'Server
10.227.1.34:7004 not found' (again paraphrased).
Among the things we've tried:
* Changing the URL from the IP to 127.0.0.1
* Enabling/disabling SSL on either or both WLSs.
* Changing the server name in WLS2's copy of weblogic.properties from
'myserver' to 'myserver2' (previously they were both 'myserver')
* Upgrading WLS2 to 5.1.0sp5 (Tried upgrading WLS1, but was getting class
not found errors and quit because that WLS is being used by other people)
This is a Solaris server. WLS1 is running 5.1.0 and WLS2 is running 5.1.0sp5
Any suggestions would be appreciated.
Best,
Randy Yarger
marchFIRST
[email protected]
"Michael Girdley" <[email protected]> wrote in message
news:[email protected]...
>
>
There should not be. What is your network configuration? Are they on
separate IP addresses?
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Randy Jay Yarger" <[email protected]> wrote in message
news:[email protected]...
Hi,
We're having a problem with communication between two copies of Weblogicon
the same machine. They are configured with seperate ports (regular andSSL).
Independantly, they run fine. I can access EJBs running on either of
them.
The problem is that a bean in one of them has code which attempts toaccess
an EJB on the other one. The procude fails when trying to obtain theinitial
context. This same code works if compilied independantly of WebLogic onthe
same machine.
Are there any known issues regards communication between two running
instances of Weblogic on the same machine?
Thanks in advance,
Randy Yarger
marchFIRST
[email protected] -
Configuring SMTP Namespace Sharing between two Exchange Forests on the same LAN
Hi guys, really hoping that someone can help me with configuring SMTP Namespace Sharing between two Exchange Forests on the same LAN.
Basically, I have created a new forest and installed a new exchange organisation in this forest. Both forests are located on the same IP subnet and a two way trust has been created between the forests. Federated sharing has also been configured.
I can use ADMT to migrate the user and computer accounts to the new forest and also migrate test mailboxes over. Ideally, I want to be able to do the mailbox migrations in stages so will need to be able to have mail flowing between the two forests.
I have read over the following article (http://ibrahimnore.wordpress.com/2012/09/06/configuring-smtp-namespace-sharing-between-two-exchange-forests-part-2/)
which is good but it's demonstrating over the internet, can anybody advise how this can be achieved on the local LAN?
Any help greatly appreciated :-)Hi Gilliano,
Thanks for correct link. I must say this is a very good article indeed, I read the entire article and if you go to the 3rd part of this article, please note the text "DOMAINC.COM is configured as Internal Relay Accepted Domain on both the domains"
This is exactly what I asked you to check. Personally, I understand the method described in this article will work but its very complex to manage and administer, while the easiest option is to configure internal relay at the first place and no need to make
so many DNS changes and customizations to your environment.
The solution really depends on what your requirement is - Since you mentioned that you are migrating stuff over from source to destination - I feel this article is too complex for your situation and not really worth (for your requirement). The setup described
in the article is an excellent choice if you are planning to keep both forests alive for longer duration due to several reasons like compliance or company mergers and so on...
please let me know if my explanation is not clear enough.. we can even even have a one-on-one email conversation too!
All the best!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. Regards, Siva -
Is there a way to switch between workspaces in Spaces from the comnand line? I use several workspaces from Spaces, each workspace having a certain number of fixed applications running. Rather than set all this up each time I log on, I'd like to write a script from the command line (I use gawk) to automate this. Currently I have a gawk script that, given a directory, opens a few xterms whose working directory is the given directory, and opens "preview" applied to a certain file in that directory. However, at present I have to manually move an xterm through each workspace and run my gawk script in each workspace (applied to each directory that I'm working on).
There must be a better way...Addendum: Can this be done via: open -a Spaces --args xxx , where xxx is some set of arguments (or something like this)?
Maybe you are looking for
-
Is there a way to restore text messages back to my iPhone 5s version 7.1.1? I have several text messages that have been deleted somehow and I would like to restore them to my phone. I have tried restoring it from the last backup and that did not hel
-
Any help is accepted and i need to know asap!!! THANKS!
-
For the upgrade we executed db scripts for upgrading database from 7.0 to 7.1 and from 7.1 to 8.1. And we did a fresh installation of 8.1 and pointed to this repository. And we imported the update.xml that comes with 8.1 Just wanted to confirm if the
-
My pavilion dv1000 , i try to reboot it ask for password but i don't have,please help...
I try to restore my computer it ask for password ,but i never set up the password so how i know that password (maybe it was set up by hp company)?Please help me if you know that password. Thanks a lot, have a good day.
-
Multiple Audio out: usb dac audio out and hdmi out
Good afternoon everyone, I have a 2010 mac mini with the following audio set up. - A usb dac (xtreamer) connected to my stereo amplifier - an Hdmi cable to the tv to get video and audio diretcly to the tv Is it possibile by any chance to get simoult