Is it possible to switch from 64-bit to 32-bit on a x86_64 install?

Well I was a noob when I installed Arch, and still am, but I had enabled the multilib repository not knowing that it would have so many conflicts with what I would like to do (namely, PlayOnLinux). Is there any way that I could remove the 64-bit libraries that I have installed, remove the multilib repository, and have an all-32-bit system? The loss of RAM won't be a big deal for me since I will most likely just install a PAE-enabled kernel (if that's possible in Arch) to make up for it (that's what I had done in Ubuntu).

I tried the switch... but... I got fubar'd It might have been an error in the way I had my system set up though, because I did follow every step that was posted. After I rebooted from doing the switch, I was no longer able to boot, and I was getting a "cyclical error" or something like that. I'd just try the 32-bit chroot environment if I were you. I don't have it working yet (someone is helping me out with it), but once it's done, it should be a much cleaner and safer way of using 32-bit programs.

Similar Messages

  • Is it possible to switch from the preinstalled iTunesU to the original iTunes on an iPad. If it is can someone explain how to do it?

    Is it possible to switch from the preinstalled iTunesU on my iPad to the original iTunes. If it is can someone tell me how, and is this something that commonly happens?

    I'm not sure what you are asking.  There is no "preinstalled iTunesU" on an iPad.  The iTunes app is a portal to the iTunes Store. Use the icons at the bottom of the page to switch to different sections of the store.  Use the Music app or the Videos app to access iTunes media you have synced to the iPad.
    To learn more, refer to the iPad iOS5 User Guide

  • HT3696 How its' possible to change from 32 bit to 64 bit Processor for MacMini?

    How its' possible to change from 32 bit to 64 bit Processor for MacMini? Mini?

    You probably have a Core Solo or Core Duo model. You can upgrade the CPU to a 64-bit Core 2 Duo in the T7200-T7600 family.
    iFixit and OWC provide easy-to-follow, step-by-step guides. It's a delicate procedure, but not overly difficult. I'm all thumbs, and I have done it twice.
    Cheers!

  • "Class Not Registered​" after switching from 32-bit to 64-bit LabVIEW.

    I recently upgraded LabVIEW 2012 from 32-bit to 64-bit.  Now I'm getting an error that says "Class not Registered".  It still works just fine with the 32-bit version. 

    Thank you Nathan and Sunshine.  The problem is I didn't build the program - it came with the instrument.  As far as I can tell this is what's going on:  The vi's are replete with these activeX objects - all communication with the instruments is done through invoke and property nodes.  After switching to 64-bit the very first sub vi has an error at the very first command (Err (-2147221164)). It's a reference (seemingly to a class but I actually have no idea what that means) passed to the "Open Automation Function".  I'll attach a screen shot for the sake of overkill.  
    Attachments:
    labviewerror.png ‏20 KB

  • Is it possible to switch from Verizon Yahoo email account to a basic Verizon.ne​t account?

    I have a Verizon Yahoo email account, and have not used it in a while. I recently started using it and realized that I hate the Yahoo portal (garish ads, cluttered interface, etc.).  Does any one know if it is possible to switch to a basic Verizon account. At this point I don't care if it is the classic Webmail or the new Message Center.

    Yes.  I did just that a few months back.     You can't do it thru the self-service portal however.
    While I don't know if there are different requirements in different states or service areas which may affect who can switch, etc., what I did was use the tech support chat and explained to them that I didn't want the "Yahoo" experience any longer.   Explained I was trying to switch to AOL just to get away from Yahoo but that it wasn't working thru the portal -- but once we started chatting I told them that I really didn't want AOL either -- just wanted the Verizon branded basic experience not a partner one.  Took them about 15 minutes and the first line person had to involve and engineer behind the scenes to make the change, but they got it done without skipping a beat.
    If you use a client other than the web client to get your email (like Outlook or Thunderbird or on a mobile device), you will have to reconfigure their POP and SMTP settings afterwards.

  • Is it possible to switch from Office 365 online user management to Active Directory after Exchange online migration?

    If we utilize the Cutover method to migrate from on-premise Exchange (2007) to Office 365, which to my understanding will hand over user management/authentication to Office 365 online during the process, is possible to later switch from Office 365 user management
    to Active Directory (synced to a future local domain, or even possibly via AD federation single sign-on)? If so, how difficult is this process and is there any documentation available?
    Asking this because the organization  I'm working for plans to upgrade (re-do actually) its entire infrastructure. There will be a completely brand new domain/AD set up that's totally unrelated to the old one. At the same time, we also plan to migrate
    all emails (previously hosted locally on Exchange 2007) to Office 365 and get rid of local exchange. Now because we will set up new domain, we do not want to carry over the older AD to the cloud, hence we will not use the "Staged Migration". 
    So the plan is to to use "Cutover" migration first, which means all authentications will become Office 365 managed. That's fine for now. But later, after we set up our new domain and AD controller etc, we'd like to have Exchange Online switch back
    to syncing with our new on-premise AD. We'd also like to consider the AD Federation Services if it's not too complicated to set up.
    Your advice on this would be greatly appreciated!

    In principle, you cannot sync back from the cloud AD to the on-prem, yet. But you can take advantage of the soft-matching mechanism once you have the new AD in place:
    http://support.microsoft.com/kb/2641663
    Be careful though, as the moment you turn on Dirsync, all the matching users in the cloud will have their attributes overwritten. A very good idea is to do an 'export' of the cloud AD first, using the WAAD module for PowerShell and the Get-MsolUser cmdlets,
    which you can then use to compare or import data in the new on-prem AD. Some links:
    http://technet.microsoft.com/en-us/library/hh974317.aspx
    http://msdn.microsoft.com/en-us/library/azure/dn194133.aspx

  • Is it possible to switch from the Lion operating system to an older Snow Leopard operating system?

    I think I have to switch from my OSX 10.7.5 to an older system...am just curious what it would take to go to an older operating system and how much hassle it would be?  Any advice and info would be appreciated!  thanks...

    raymoo wrote:
    I think I have to switch from my OSX 10.7.5 to an older system...
    If your Mac Shipped with Lion OS X 10.7 you cannot install an earlier OS.
    Installing an Earlier Version of OS X

  • Possible to switch from Apache to IIS for 9.3.1 BI+ products?

    I need to see if it's possible to 'convert' my 9.3.1 Hyperion BI+ tools to run on IIS instead of Apache, or how hard/tricky it is.
    1) Anyone ever switched web servers? Can it be done without uninstalling & reinstalling all the BI+ products?
    2) what are the pitfalls?
    3) Will SS re-register with it smoothly or would I have to set all security & provisioning up from scratch?
    4) how to connect Tomcat back up to IIS?
    5) The Financial Reporting (reports plus books/batches), Web Analysis and Interactive Reporting documents, scheduled BQY jobs, and Workspace itself would continue to function normally once IIS is in use right? or do things have to be re-imported or something?
    6) The default port would be different right? does that cause any issues given this is an existing production enviro? Do i have to change the port in several places or does some re-register wizard take care of it??
    I've had Tomcat/Apache in production for over a year so before attempting this cutover I'd llike an idea of what I'm up against to make sure it's even possible.
    Thanks!
    Karen

    I'm switching them solely to have a better shot at implementing true single sign-on to where it'll pass the PC user's MS AD login ID to all the Hyperion products. With all my questions above I may have given the impression I was also moving off Tomcat, I am not. Was just being overly cautious to make sure my bases were covered. We're still using Tomcat so as I understand it, Web Analysis should still be okay..right?
    Pleasantly surprised that Support was able to tell me how to switch web servers, it was simple and it worked for Workspace (but I can't get Web Analysis working yet now that I tried to implement SSO at the same time):
    "As long as the IIS is on the same box as where you are using for Apache HTTP, then the simplest thing to do is to shutdown Apache, change the Port of IIS to 19000. Restart IIS, then run the configure Web Server component of the config tool, selecting IIS."
    To change the port of IIS6:
    Microsoft Internet Information Services versions 4.0 to 6.0
    1.     Open Internet Service Manager or Internet Information Services (IIS) Manager.
    2.     If necessary, expand the Web server that you want, and then expand Web Sites.
    3.     Right-click the Web site that you want to change.
    4.     Click Properties.
    5.     Click the Web Site tab.
    6.     Change the TCP Port Number in the TCP Port edit box (or click Advanced for multiple Port settings).
    7.     Click OK to save the changes.
    I now have Workspace working to where it does NOT prompt for a login ID, it works nicely & transparently running on IIS. Web analysis however literally produces a login popup box, the title of the window is the Web analysis server name. Can't figure it out so I opened an SR to hopefully get some assistance. Unfortunately I forgot to test WA after switching to IIS, I went ahead and configured for transparent login too before trying WA so I'm not sure which is causing the login popup box but since I can't get past the login box WA throws up a "you are not authorized to view this page" page.
    Ever done this? should it work? that is, WA running on IIS/Tomcat; and also WA working after following the IIS/Tomcat Transparent Login instructions provided by Support - they've been floating around for a while so I assume you've seen them...?
    Thanks,
    Karen

  • Is it possible? to switch from the orignal computer, in which my iTunes playlist was created, to a new computer?

    Is it possible to switch from the my orignal computer (in which my iTunes playlist, and iPod itself, were first setup) to a new computer?
    Or am I able to branch my account onto two separate computers?

    I had zero problems going from pc to pc to mac with my ipod.  i did have poblems going from mac to pc. I now put my tunes, books on an external to my old pc when my daughter wants something.

  • Is it possible in iPhone 4 to switch from iOs 7.0.2 to 6.1.3

    Since I have updated my IPhone 4 iOS 6.1.3 to 7.0.2, my iPhone has started to hang and the processing has become slow.
    Is it possible to switch from iOS 7.0.2 to 6.1.3. Please suggest as now I feel like after up-gradation my i phone has become useless.

    anchalgupta181988 wrote:
    Is it possible to switch from iOS 7.0.2 to 6.1.3.
    Sorry... No... Downgrading is not supported by Apple.
    anchalgupta181988 wrote:
    Since I have updated my IPhone 4 iOS 6.1.3 to 7.0.2, my iPhone has started to hang and the processing has become slow.
    Try This...
    Close All Open Apps... Sign Out of Your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
    If the issue persists...
    Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Some Other Tips Here...
    http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/

  • HP PSC 1315xi All in One from 32-bit XP to FULL FEATURE for 64-bit Windows 7

    Switched from 32-bit XP to 64-bit Windows 7,  which did not install all  printing features or my scanner.     Know a  lot  of  people  have  this  problem, can't  find the forum  which is exactly  for  this  particular  problem,  and can't find  an  HP download.  There are so many other companies on the HP Support  pages.  Might you  include on your title page how to re-read  this subject?   
    I'm afraid I'll lose my print and copy functions forever if I  first Uninstall.  Would checking "Add Printer"  preserve  my present  version  until after I  get a  successful  download  or  maybe even  a  new Disk  for  64-bit Windows 7?   I  haven't even  found that  yet.  Thanks. [edited by Moderator]

    Good day AmerEagle,
    I understand you have upgraded from Windows XP to Windows 7 64bit and are looking to install the driver and software for your PSC 1315xi. I will certainly help you!
    Here is the direct link to the download for the Windows 7 full driver for your printer:
    HP Deskjet and Officejet Full Feature Software and Drivers
    Enjoy your Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • [SOLVED] Possible to switch phonon backend?

    During my first Arch installation, I used all the defaults. I had distorted sound in my headphones. Then, because of some problems with dual-booting, I had to reinstall Arch from scratch. Thinking it might make a difference, instead of gstreamer I chose xine this time around. (It made do difference.)
    Anyway, I've since learned that "xine is unmaintained and will not see updates", so I'm wondering if it is possible to switch from xine to either gstreamer or vlc backend without having to reinstall from scratch.
    Last edited by ibrunton (2011-05-12 21:16:18)

    do you know you have a systemsettings in kde? go to system settings > hardware > multimedia > phonon > backend.
    personally I use the vlc backend for now, seems like the gstreamer backend is using some CPU..
    choose from phonon-gstreamer, phonon-vlc, phonon-xine from extra and phonon-mplayer-git from aur.
    Last edited by JokerBoy (2011-05-12 20:46:38)

  • HT1343 how do i switch from using mac to windows?

    how do i switch from using mac to windows?

    How is Windows installed? If you installed Windows using Bootcamp Assistant then when your computer is powering up press and hold the option key. When the boot manager appears, select either OSx or Windows to boot.

  • Problems with switch from Windows to Mac

    I recently switched from Windows PC to a new Mac and cannot install the Acrobat 7.0 Professional CD that I used with Windows on the Mac. Am I missing something, or do I need to buy a whole new product?

    No Windows program will install on Macintosh (a very few products have
    both Windows and Macintosh on one disk, but not here).
    If you call Adobe you can buy a "crossgrade" for a reduced price. You
    will need to upgrade to Acrobat 9.0 at the same time.
    Aandi Inston

  • Latest 64-bit Nightly will not install. Minefield was working fine!

    I was regularly using Minefield on my 64-bit Windows 7 system. The updates installed fine. About the second update following the switch from Minefield to Nightly (roughly 04/25), the upgrade install completes but the program will not run. I just get a "Windows" window saying it won't run. I attempted to un-install, clean registry, reinstall, etc. Nothing works. I tried compatibility settings to no avail. Any suggestions. Windows (of course) hasn't found a solution.

    There is a known problem with the latest 64 bit versions of the nightly builds. The 32 bit versions are working. One of the best places to keep track of issues with the nightly builds is the MozillaZine builds forum - http://forums.mozillazine.org/viewforum.php?f=23

Maybe you are looking for