Is it possible to sync a clip without using multicam ?

Hi there,
I have some video clips recorded on 2 videos, we just say Video A & B.
On the timeline, I mostly used clips from Video A.
But for one 10 sec duration I prefer clip from Video B.
How to I sync this 10-sec clip form video B to video A without using multicam and without using the trial & error method to match the audio wave. I am looking for a sync function, is there one ? One where you click sync and the clip auto move the clip to match. (Just like how you do in in mulitcam editor where u select the clip to sync with the clip in monitoring angle).
Is it possible ?
Thanks

Russ H wrote:
If I understand correctly, you want the 10 second B clip synced to As audio. In other words, are you using A's audio throughout your project?
Yes that is correct ...
Russ H wrote:
If that's the case, I'm not sure why you wouldn't just make a short multiclip and over-write (or replace) what's currently there. That would be the easiest. The manual way would only be slightly more difficult; stack them with a connect edit; zoom in and align the wave forms.
Yes, I want to put the short clip B over A. But I want to avoid the difficult way of stacking it up bcos the positioning is always not synce. Very cumbersome to match the audio waveform.
But before I make a short multiclip (I assumne you mean compound clip), I still need clip B to sync to clip A. With only one B clip, I do not want to create a multicam ...
Thanks Russ, any ideas ?

Similar Messages

How to sync to clips to audio without using multicam ?

Hi there,
I want to sync a video clip to sync with an audio file on the timeline.
How do I do this without using multicam ?
Thanks

You can't sync clips in the timeline unless you manually sync them. Otherwise, use the sync function in the browser and replace what you have in the timeline with the synced clip.
Russ

Is it possible to create .ncd file without using MAX?

Is it possible to create .ncd file without using MAX? I am trying to read the data given by hundreds of possible Arb. IDs on one of the CAN port without having to create it from the MAX.
Thank you

Hi,
the NI-CAN driver software does not provide functions/VIs to generate
*.ncd files. However the *.ncd file format is just plain XML (ASCII text). Take a
look at the example.ncd file that gets installed with NI-CAN
(<ProgramFiles>\National Instruments\NI-CAN\):
<?xml version="1.0" encoding="UTF-8"?>
<nican_config version="0.1">
<saved>8/8/2005,17:58</saved>
<message name="TransmissionFluids">
<id extended="0">82</id>
<dbc>C:\Program Files\National Instruments\NI-CAN\example.ncd</dbc>
<conflicts>0</conflicts>
<bytes>6</bytes>
<interface>1</interface>
<comment></comment>
<channel name="ClutchPressure">
    <conflicts>0</conflicts>
    <bitfield start="0" bits="8" order="0" type="1"/>
    <linear_scaling factor="1.600000e+001"
offset="0.000000e+000" max="4.000000e+003" min="0.000000e+000"
default="0.000000e+000" unit="kPa"/>
    <comment></comment>
</channel>
</message>
</nican_config>
Thus, you could generate *.ncd files with simple file I/O. Having XML-specific file I/O functions simplifies this task.
-B2k

Cutting into new clips without using " Transition effects"

What is the best way to cut into new clips in a smooth fashion without having to use a Cross Dissolve, etc. I am trying to create a more matter of fact experience with this project.
TV productions successfully go from clip to clip without transitions.... What magic is behind solid swithcing between clips in the timeline without using transitions ?
Thanks !
Power Book G4 Mac OS X (10.3.9)

I have just noticed that you are talking about rescuing a current project.
My comments about cutaways still apply, but whether you will be able to shoot some "extra" footage now will depend on the nature of your film. Most things are possible with a little ingenuity.
If your film was about the first Mars landings and you can't get there to re-shoot, all you need to do is to take a trip to Australia where they have some scenery EXACTLY like the Martian landscape - indeed there is a classified US base on the edge of it!
Alternatively, and cheaper, you could shoot domestic footage and whenever the astronaut was about to have a jump-cut, you could have a flashback to his home life.
So with a little imagination most problems usually can be overcome.
Ian.
PS.I do NOT subscribe to conspiracy theories and would never suggest that the martian landscapes NASA filmed were actually shot in the antipodes.
Ian

Is it possible to display unrelated info without using a subreport?

Hi,
I'm trying to create a report that displays 2 different sets of information without using a subreport.
The first section of info (the part I'm having trouble with) is simple displaying the info in the db. It is just the differnt security settings of the system.
The second section of info is each users info and their personal security settings. This part is not a problem and displays correctly.
How can I get the first section to be displayed at the top of the report without it affecting the second section which uses the group header and details portion of the report? When I try and put it in the Page header it throws off the second section and causes the information in the details to be repeated multiple times.
Is it possible to do this without a subreport? I'm using Crystal Reports 2008.
Thanks Mike
Edited by: Mike Swift on Aug 21, 2008 5:35 PM

Mike
Have you tried selecting the "Select Distinct Records" box in report options.
Maybe this has nothing to do with your problem but I thought I would throw that out.
Good luck

Is it possible to install Windows 7 without using BCA to install drivers and using the support 5 software for drivers on my iMac 2014?

What I am wondering is if I can install Windows 7 on my iMac 2014 without using BCA to install drivers and using the manual download Support software without bricking my system. The issue is that I recently moved into the country without a reliable data connection, so I'd like to download all the drivers from when I'm in town generally. Any info is appreciated.

Mikhailov wrote:
Hello,
I'm trying to purchase inexpensive computers for my classroom. One of the computers I'm looking at is the new $200 HP Stream 11. My school's IT department said it might be difficult to install the district's copy of Windows 7 on these computers if I purchase them. Does anyone know if it's actually possible to uninstall Windows 8.1 and install Windows 7 using an external USB or external CD Rom Drive? Any help would be greatly appreciated.
The District is right to say what they told you they can't install Disctrict Windows 7 on your computer because they have a license agreements with MS and doing so will violate their Terms of Agreement. And you shouldn't be asking something like that to start with. If that laptop can't install Windows 7 it then your stuck with WIndows 8 unless HP has downgrade to go back to Windows 7 on it otherwise if none exist you will not get any drivers or support for it. You best luck is to find a used Windows 7 laptop and order the HP recovery media for it and wipe it clean to factory install and register it to you and that will give you a Windows 7 maching to start with.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Is it possible to develop struts application without using JPF in workshop 8.1?

Hi,
Is it possible to develop application based on struts framework without using
Java Page Flow in workshop 8.1?
I developed one application without using JPF , but it is showing some Deployment
errors.
rgds,
girish

Girish--
Sure, though, I'd still encourage you to take a look at JPF. :)
If you remove the JPF runtime files from WEB-INF/, WEB-INF/lib, and JPF specific entries in
web.xml, you can start defining a struts-config.xml file against the Struts 1.1 runtime in the
webapp, or you can replace that with a different version as you need. You'll also need to define
the Struts runtime in web.xml including the servlet, taglibraries, etc.
One note, the JPF flow view and other JPF specific editors don't work over a normal
struts-config.xml file.
Hope that helps...
Eddie
Girish wrote:
Hi,
Is it possible to develop application based on struts framework without using
Java Page Flow in workshop 8.1?
I developed one application without using JPF , but it is showing some Deployment
errors.
rgds,
girish

Is there an alternative method to sync Safari bookmarks without using iCloud? I am running the latest versions of Mavericks, iOS and iTunes.

Is there a method to sync Safari bookmarks from my Mac to my iPhone WITHOUT using iCloud?
I am running the latest versions of Mavericks, iTunes and iOS.

Hi Mary ..
Afraid not but if you decide to use iCloud and you're iPhone is running iOS 8, (according to your profile), hold off until you can upgrade your Mac to Yosemite.
Please read > http://www.macrumors.com/2014/09/29/reset-all-settings-icloud-drive-bug/
Apple - iCloud - Learn how to set up iCloud on all your devices.

Feature request FCP-7...To view 2 tracks without using multicam ?

Many of us work with 2 video tracks one above the other, sometimes I do not want to set up multicam to see both tracks simultaniously but how difficult can it be when looking at 2 video tracks would it be to allow us to view the footage underneeth track 2. Workarround is tedious, lowering oppacity of T2 or making box wipes in the motion tabs etc, this is fine till you are editing HD. So there it is...a way to view 2 tracks simultaniously without invoking multicam.

a way to view 2 tracks simultaneously without invoking multicam
For now, the Playhead Synchronisation mode Gang will get you halfway there ...
Place the playhead where you want to see both clips and then double click the lower (hidden) clip, Then choose View menu *> Playhead Sync > Gang*
Now, as you move the playhead in the canvas/timeline the image in the Viewer will be updated to show the equivalent frame from the ganged clip.
... but this only works at a clip level and not at a track level. If you are working with multiple short clips then consider nesting the track and then ganging to the nest.
(Note to Apple Developers: It ought to be easy to extend the Gang to work at a track level ie add a Gang Track mode, by exactly the method above whereby the track could be treated as a virtual nested clip)
Another way to quickly view the clips on a lower track is just to toggle clip or track visibility of the upper clip/track. Ctrl B is the shortcut for toggling a clips visibility. If toggling track visibility beware losing all your renders ... use Ctrl Z (undo) to toggle the tracks visibility back on as this will also bring back any lost render links.
As to a formal implementation of a new feature to view all tracks given the existing GUI, heres what I'd be thinking:
Similar to the common DAW function of stacking takes and auditioning them (STP can do it) I would imagine that being able to stack video clips and then view them all simultaneously (without having to set them up as a Multclip) ought to be a worthwile feature.
I'd see it working using a simple toggle key to open and close a QuickTake window or some such which would display all the clips at the playhead position similar to a MultiClip view. Similar to the Multiclip functionality, in the QuickTake window, clicking on the clip you want, or using a keyboard shortcut to switch, would make the chosen clip the active one (setting the Clip Enable/Disable Status accordingly for clips). Clips on tracks not targeted by Auto Select would not be referenced and/or affected by this mode.
Personally, in the For What It's Worth category, I think EDIUS's implementation of the Multicam workflow is amongst the best I've seen. You stack your clips on the timeline and then switch to Multicam mode (F5) ... no convoluted setup process, just instant Multicam functionality with whatever is on the timeline. Another key press to toggle it back to the normal edit mode.

TS3999 Using OS Mavericks. Any way to sync Contacts & Calendars without using iCloud? Don't always have internet!

Any way to sync ical and contacts without internet?!!

Not unless you want to install OS X server and set up your own CardDAV and CalDAV server as explained here: http://www.macworld.com/article/2061183/itunes-ios-syncing-gone-solve-it-with-se rver-.html. That would allow you to sync contacts and calendars locally with your Mac as you could before Mavericks.

Syncing across devices without using mobileme

Hi, I use ical on my ipad for all my work and personal dates. I gather I need to pay for mobileme to sync across my ipad, iphone and macbookpro. However, I thought mobileme was being discontinued and also, doesn't the cloud take care of all of that?
A subsidiary point is that I recently had to purchase a new hard drive and I've really lost confidence in having the laptop as my master for docs and trust the ipad far more.
Any thoughts please, from anyone?
Thanks - J.

Firstly, MobileMe is dead, and there is no question of paying for it.
Your signature says you have 10.6.6 - is this correct? If it isn't please correct it to prevent confusion. if it is, you should firstly get the 10.6.8 combo updater to get it as high as Snow Leopard will go.
If you want to use iCloud's full facilities you need to upgrade to Lion: this is $29.99 in the Mac App Store (which you will need 10.6.8 to access). Your Mac will need to meet the requirements:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
and your iPad will need to be running iOS5.
If you have not migrated your MobileMe account to iCloud, go to http://me.com (on your Mac) and follow the link to migrate: you need to do so as a matter of urgency as we don't know for how much longer this will be possible.
That done, in theory you should be able to access your email in Mail at the same server settings, but this hasn't worked for everyone: you can set Mail up manually to access your iCloud email:
Entering iCloud email settings manually in Snow Leopard or Leopard
Once migrated, your mail will also be available at http://icloud.com
Strictly speaking Snow Leopard cannot sync your calendars: there is an unsupported hack which has worked for some people.
If you can't, or don't want to, upgrade to Lion you might be interested in BusyCal, which is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion. A single user licence (two machines allowed) is $49.99.

HT1386 I need to be able to sync my contacts without using iCloud - how do I do it?

How do I sync contacts from my Mac to iphone? This used to work now I am on Mavericks it does not. I do not want to use Icloud.

lindatexmi wrote:
I know there must be a way to create space without deleting apps,
Delete other content such as movies, photos or music..

Is it possible to sync 2 ipods that uses 2 seperate accounts?

Hi, my mother has two ipods using two seperate accounts. She wants to sync all of her music from one ipod to her new main one that has a few films she has paid for. Is this possible? I'm not a big user of itunes and but my mother is even worse so i could really use some help.
Thanks!

Yes. See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

Is it possible to sync two separate iPhones, using two separate itunes accounts on the same computer. Have not been successful so far.

We have two iPhones and two itunes accounts but one computer. The phones are 3GS but are new. I have had no luck in getting syncing the phones individually. I have called Tech Support. They sent me a link that I had already been to. This is more than frustrating.

http://support.apple.com/kb/HT1495

Is it possible to update my iPhone without using a computer?

Hello, new iPhone user here!!
I'd like to update to the latest iPhone software, currently I'm on 4.0.2 I think but want to go to 4.1!
I've not got access to my computer though assist in storage for 3 months!! I've got wi fi though, is it possible to update the phone or not?
Thanks

Ah brilliant thanks for the quick reply, looks like a long wait for me then ha!!

Is it possible to sync a clip without using multicam ?

Similar Messages

Maybe you are looking for