Is it possible to take a mixed and bounced wav and convert it back into the original individual aiff separate tracks?

Hello. Is it possible to take a song that has been bounced down to a .wav and is now in itunes, and import it back into logic but as the original seperate tracks that make up the bounced .wav? I have some songs I recorded when I first started using Logic, and the mix and mastering is horrible. I have gotten way better since then and I would like to remix and re-master some of these tracks. Only trouble is I no longer have the original seperate track Logic Aiff files. I know I can obviously import the bounced down stereo .wav file and remaster that,but it would be really cool if Logic had some way of recalling the song back into its seperate tracks. Is there any way at all to do this? If Logic can't do this maybe there is an app out there that can?
Even though I just downloaded Logi X I also decided to keep Logic 9. So I can run both if that helps.
Thanks,
Mike

That would be like mixing a cake batter and deciding you wanted to start over using the same ingredients, separating the eggs, milk, baking powder, baking soda, flour...etc, back into their original form.
Can't be done... the instruments share the same frequency ranges. There is sofware that let's some adjustment to pitch be done but trying to pull out individual instrument/vocal tracks from a mix would leave you with very, very inferior tracks to re-mix with.

Similar Messages

I have updated iTunes on my computer and my iPod nano 4 is up to date but not all music shows up in my iTunes library..only the purchased songs..what happened and how do I get them back into the library?

The music library in the updated version of iTunes is grossly incomplete although the music still remains on my iPod. Why did this happen and how do I get the music back into the library?

Hi Dalegu219,
Thanks for visiting Apple Support Communities.
If your iTunes library is on an external hard drive, but iTunes is not recognizing the library, first make sure the right library is selected.
You can use these steps to make sure iTunes is opening the library on your external drive:
If iTunes is running, quit iTunes.
If you're using Windows, hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes.
If you're using a Mac, open iTunes and immediately hold down the Option key.
You should see one of these screens:
Pick Choose Library and locate the library on your external hard drive.
From:
iTunes: How to open an alternate iTunes Library file or create a new one - Apple Support
If the right library is selected, but you do not see your songs, try re-creating the library using the instructions found here:
iTunes: How to re-create your iTunes library and playlists - Apple Support
Best Regards,
Jeremy

I downloaded Mavericks and now when I google a topic and select I then cannot scroll back to the original google page?

I downloaded Mavericks and now when I google a topic and select one, I then cannot scroll back to the original google page if I wish to try a different answer?

Sorry, I'm not very good at describing the problem. If I had multiple browser pages open, prior to downloading Maverick I could swipe the mouse to go back or forward as required. Now if I google a subject and the page comes up with all the choices and I pick one, I now cannot swipe back to the first page , I have to re-open google each time, type in my seach and start from scratch.

Somehow I made the new tab a website (funmoods) and I want to make it back to the original new tab thing?

I think i may have downloaded a websites tool bar and it changed the normal new tab to it's website

To reset your "new tab" back to the original way, read this article:
<br> [https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page Restore the default home page]
If that doesn't work, you will need to uninstall the FunMoods Toolbar then repeat the steps again from the article above.
To uninstall:
<br>''' Tools > Add-ons > Extensions'''
<br> Right-click on '''Funmoods 1.5.0''' then click the '''Remove '''button.
You may also watch this Youtube video for step by step instructions to uninstall FunMoods:
www.youtube.com/watch?v=RgvN9D07FGA

HT4915 How do I keep iTunes Match from De-Organizing my music? I have spent hours organizing my music ratings, info, and deleting duplicates only to quit iTunes and find out that it reverts back to the original when it starts up and syncs with Match. HELP

It first de-organized hours worth of my time. Then I tried it again with iTunes match off only to find out that once you turn it on it de-organizes it again!! I have iTunes match turned off on all my devices. HELP

Go to Settings > iTunes and App Stores and set the option for "iTunes Match" to OFF. Then do a hard reset by holding down the Power and Home buttons until you see the Apple logo.
FYI, there is no matching from an iOS device.

How do I get my old Apple ID offf my phone? The iTunes and Apps are looking for my old ID which have been replaced but iPad and iPhone software seems to go back to the original password.

How do I get my old Apple ID removed from my iPhone?

1patiot1 wrote:
someone please tell me how to fix this. I cant access any apps or anything because my old apple id keeps showing up on my phone and wont show the new one.
You created a new AppleID?
Why not simply update your old AppleID so you have only one iTunes account?

When I send email and attach photos, those are been randomly resized, without asking and I can't resize them back to the original size on the screen and on the email, even if I select them and click on "LARGE SIZE" images on the right top box of the email

By the way, I've tried to look for the Attachment Tamer box, between the Mail Prefferences but it doesn't even show me this option. So I can't do it.
I'm using a MacPro.

Marc Bublitz wrote:
I thought that originally too, but that's all changed with the pool of apps that are out there now. So now what I'm trying to do is to prove that technology is progressing to the point where a tiny, handheld phone can produce images that are nearly as good as photos taken with much more expensive and bulky equipment. I've got my share of expensive bulky camera equipment, but I'm finding that I'm having much more enjoyment out of using my iPhone from initial capture, to editing, to publishing, and achieving results that are nearly as good.
I do think you're working under a bit of a handicap. For example, lens quality. Here's an iPhone photo example of some wild turkeys in the neighborhood masked by flare that would be much better controlled on an SLR lens (click to enlarge - the flare is obvious, the turkeys are not):
At the same time, working under a handicap can definitely spur creativity, similar to the oft-cited example of swapping out your zoom lens for a prime to force yourself to pay attention to composition.
It's an interesting concept - I wish you luck!

I am trying to buy an app. I had to update my credit card info. It won't take the update and the screen is frozen - I cannot go back into the app store.

I am trying to buy an app on my Iphone5. I needed to update my credit card info. It wont take the updated info and the screen is now frozen. I cannot go back into the app store

It's a network issue, not an account balance issue. Troubleshoot your network or just restart your iPod and/or router, try connecting to the Store a bit later, or try the download in iTunes on your computer and then sync the purchase to your device.

My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Do NOT use an iPod/iPhone charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know. If the above test does, in fact, indicate a problem, read this.
Also, according to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

Is is possible to have the images as thumbnails and make it so you can click on them for a larger view and then click them again to have it go back to the original size? In an interactive pdf?

I am designing an interactive catalog in a pdf. Is it possible to have the images as a thumbnail and then click them to enlarge the image and then click again to make them go back to the original size?
Thank you in advance!
Stephanie

It can be done with Show/Hide buttons:
Here's a button created from a small version of the image (notice that it's selected in the image below):
The small button has a Show/Hide Buttons and Forms action. It's action is to make the Larger Image visible (eyeball turned on) with the small image hidden (eyeball turned off).
The large image is also turned into a button (shown below):
Notice the checkbox "Hidden Until Triggered". The large button is hidden until it's triggered by the small button. Clicking on the large image also causes a Show/Hide action which shows the Small button and hides the large button.

Iphone wont turn on. i plug it into charger and it stays at 87% and then i take it out of the charger and it shuts off. and then i try to turn it on and wont turn back on until i plug it back into the charger. HELP ME PLEASE!!

iphone wont turn on. i plug it into charger and it stays at 87% and then i take it out of the charger and it shuts off. and then i try to turn it on and wont turn back on until i plug it back into the charger. HELP ME PLEASE!! how do i fix this?!

Hello StephanieeLovezYou,
Thank you for the details of the issue you are experiencing with your iPhone. I would be concerned too if my iPhone was only turning on when connected to power. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Hi thee. As logical as I can be. I export a file back into my folder as a PSD. I then export that file to PS. Work on it, save and return it to LR. The file goes to the bottom of the folder from where I have to put it back in the original place, taki

Hi thee. As logical as I can be. I export a file back into my folder as a PSD. I then export that file to PS. Work on it, save and return it to LR. The file goes to the bottom of the folder from where I have to put it back in the original place, taking time and driving me slightly mad. Why does the file not go back to where it came from please? Thanks Tim

Umm, but this folder is an amalgam of two cameras and five cards, and I want them in capture order! Thanks for trying though Jim.
Cheers
Tim

Can I use my lrdata smart previews file on another Mac and then take the edits back to the original?

LR5 CC user. I have tried to use Smart Previews for the first time. I followed what seemed the best advice but now not sure since most of the guides feature working with a single computer and offline files. I am away travelling for over a month. I have a Mac Pro with many thousands of images. I exported my 5000 "best" as smart previews in a lrdata file to use with my macbook pro laptop while travelling. i took the lrdata file with me on a hard drive. Not the catalog file. Now it seems I can import these files (by double clicking on the lrdata file) but I am concerned that if I edit them the editing will be lost when I go back to the original. They have different file names. Have I basically lost the chance to do any editing? Or is there a way to edit and then send them back to the original catalog?

10greenmen wrote:
import these files (by double clicking on the lrdata file) but I am concerned that if I edit them the editing will be lost when I go back to the original.
One should not import & edit smart preview files (the lossy dngs with names like 7/7FB5/7FB580F4-00BB-4C39-8DE5-C09490BA6CB8.dng), instead of the photos they "represent".
But if you do, here's how to transfer settings and/or metadata from imported/edited smart preview files back to the original photos which you should've edited in the first place:
o Note: you have to import the directly-edited smart previews into your main catalog when you get home (import from travel catalog, or save xmp first and just import files - either way works).
* Download and install RelativeAntics plugin (free by me).
* Choose 'Imported Smart Previews' preset (in plugin manager).
* Select the imported smart preview files.
* Run 'Relative Antics' (File menu -> Plugin Extras).
* Deselect all items in 'Define "Related" section, *except* 'Custom Relative'.
* choose whether to transfer develop setting and/or metadata..
* and do it - this will copy settings and metadata from the selected imported/edited-smart-preview to the photo which should have been edited in the first place (the "related" photo).
Example:
==========
Rob

I have Downloaded albums that break up into each and every song or artist and I cannot get them to combine into the one album that they actually are. How can I do that?

In My itunes library some of the albums I have downloaded to my computer are being separated into each song or broken up into groups of separate artists on the album. I cannot figure out how to combine them all back into the one album they actually are from so when I open the library under Albums the album in question is just one album and not 10 or 15 albums because of this fracturing. I can make them into one album by making a playlist but that does not take care of the Album list page. Any ideas?

Generally setting a common Album title and Album Artist will fix split albums.
For compilations of tracks by different artists set the album artist to Various Artists and also tick Album is a compilation of songs by various artists if using the new version of Get info or set Part of a compilation to Yes on the Options tab if using the old dialog box (which you can invoke by holding down shift as you right-click > Get Info).
For deeper problems see Grouping tracks into albums.
tt2

When I cull through my images in the filmstrip everytime I use my right arrow and rate a photo it jumps back to the first thumbnail and i have to arrow all the way back to where I left off. Is this a setting issue

When I cull through my images in the filmstrip everytime I use my right arrow and rate a photo it jumps back to the first thumbnail and i have to arrow all the way back to where I left off. Is this a setting issue

Art,
I am trying to follow your very precise steps, and in my case (PSE11 also, Win7), the focus stays on the edited picture after I return from the editor to the Organizer. I am pretty sure that in the previous post describing your situation, I was able to reproduce the problem, but I don't remember on which version. I just tried in 'Folders' view mode to edit in a selected folder, then I clicked 'All media' so that no folder was selected. Same result in both cases.
Even if you prefer to work in folders view, you could take advantage of the ability to use 'albums'. It's a misleading word to describe a selection, a 'collection' of pictures, which you can sort as you want. It's a kind of 'playlist' like with music items. In the organizer, you can select a folder and create an album (even a temporary one) just by choosing 'create instant album'. Suppose you have made an album from a folder or a selection of highlighted pictures to edit. You can order them in date order, import batch or 'custom' order'. Since PSE12 you can also sort them in filename order. You should never lose the 'focus' on your last edited picture when coming back from the editor to the organizer. If the purpose of that album is only to help in organizing an editing session, you simply delete the album (the playlist) if you don't want to keep the list afterward.
I hope someone will be able to confirm how that can happen...
Edit;
I have just read Brian's post.
That may be the difference...

Is it possible to take a mixed and bounced wav and convert it back into the original individual aiff separate tracks?

Similar Messages

Maybe you are looking for