Is it possible to track the device installed on FACETIME?

Hello,
My device is stolen and wanted to know if it is possible to locate the device using FACETIME?
This option would open the device, and when I call to EMAIL through another device has regular ring,
A person can not turn off this option because there is an access code to the device.
In addition the device was not installed FIND MY IPHONE, but I think there is an active wireless
The FACETIME another device was calling.
Device was not active Sim, Is it possible to locate the device via IMEI? Or any other way

iphone152 wrote:
Car does not address Mac, iPhone has a serial number.
Cars have serial numbers, too. They're called a Vehicle Identification Number (VIN). That still doesn't mean that the manufacturers have the infrastructure in place to track them. You can get systems for your car that enable you to track them (e.g. Lojack). Should you fail to take that step, you can't track your car.
Apple sells you a product. They have no responsibility for what you do with it afterwards.
There is nothing to argue, Apple can locate the device 100%
Please provide proof of this statement.

Similar Messages

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
<Personal Information Edited by Host>

لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

My phone got stolen, is it possible to destroy the device?

My phone got stolen, is it possible to destroy the device?

pearlielie wrote:
My phone got stolen, is it possible to destroy the device?
You mean with the special self-destruct option?

Is it possible to include the device name in an e-mail signature?

Greetings,
I am currently managing 150 iPads we have deployed in our school system. The iPads are on carts of 30 which are moved from classroom to classroom as needed. For student work I have set up Dropbox and it has been working fine. However, a few teachers requested the iPads be set up with e-mail which can be used to prevent filling up our Dropbox space. I have successfully done this using a shared Exchange e-mail address between all the devices. However, this has begun to cause some minor issues as the students can send an e-mail essentually anonymously from any of the iPads. We are trying to avoid creating e-mail accounts for all the students or iPads and I figured the easiest way to do this would be to add the device name to the e-mail signature. After searching for a while I have not come up with a yes or no as to whether this is possible or not. If it is not, are there any other solutions that don't involve a lot of work after reimaging the devices. Thanks in advance!
~Cameron

You can set the signature for an email to be anything you want it to be. Go to the Mail, Contacts, Calendars setting and go to the Signatures area. There is however no way I know of to lock this setting, so the students can just remove the device name if they know about the setting. I also don't know if there's a way to automate the configuration so you don't have to do this manually on each iPad. Perhaps someone else here will know.
Regards.

It's possible to change the device address of a NI2503 board

It would be nice to change the device address of a NI 2503 Switch board.
I have several NI 2503 Switch Boards in my PXI 1006 Chassis. After installing the boards and performing a MAX Refresh the device addresses of the boards are listed in a random (?) order. So its troublesome to get the information which device is related to which slot.
I have more than one 1006 Chassis with the same configuration of NI 2503 Boards and I may avoid to have different software versions with different device numbers for the chassis.

The short answer is no you can't modify the device numbers for the switches.
The long answer is that device numbers are set by the bios and you can't modify them. In your 1006 chasssis there are 3 buses and in each bus the devices start at some number like 15 or 20. As the slot number increases the device number decreases. The best way to view what device numbers are assigned to which slot you need to open the pxisys.ini file on your computer. The slot number and device numbers are total dependant upon your controller. The best place to verify that you have the correct ini file is to see the following webpage : PXI VXI/VME and PXI Controller Peripherals. The ini file is only an indicator of
the settings in the bios. If you change any of the devices then you will lose functionality of that board.
There is some hope though. One thing that you can do is use the IVI support for the switches. If you download the Class Drivers for switches, then you will be able to create an IVI devices and logical names in Measurement and Automation Explorer (MAX). The IVI devices will hold the address of the module (i.e. PXI0::14::INSTR). Then create a logical name that points to the IVI virtual device. This logical name can then be referenced in LabVIEW instead of the module address. Then when you need to modify the slot number/device number of a device you simply need to modify the IVI device. There is a tutorial that will step you through this process found in the Developer Zone at : Using Measurement & Automation Explorer to Configure Your IVI System
Good Luck

A possible fix for the non-installing applications on the iPod touch

Here's what martinlondon posted in another thread...it worked for me! Turn ON the auto sync in your music tab, and the applications seem to load! You might lose your manually managed music on the iPod, but I didn't as it wouldn't sync up my music as there was too much in my library to FIT on my 8 GB iPod touch...
Here's what he posted:
A hint for anyone with this problem: I found a comment on a thread at theregister.co.uk suggesting that the problem was that you need to have automatic sync turned on to enable the new applications; manually managing your music doesn't work. I'm guessing a lot of people manually manage as their music collection is bigger than their Touch, including me...
If you switch it on and sync, the new apps install like a charm. The downside is you lose all of your painstakingly manually copied music/movies on the iPod, so you have to switch back to manual syncing and copy them all across again. But this is a way to get it installed.
I happened to be on the phone to the support team earlier today (Touch support is handled through the same team as desktop support apparently, and I had a Leopard upgrade issue) and they didn't know the cause or solution.
Have to say that Apple's QA department don't seem to have covered themselves with glory here...

manual syncing was never checked for me, so 'autosyncing' didn't fix the problem. I wish it did.

Is it possible to change the devices that are connected to my iCloud?

Hi!
When my mom first bought her ipad last year, I gave her my Apple ID so that she doesn't have to create one and so that we could share apps. However, now that we also have an iPad, we both agreed that it would be much simpler if she could have her own Apple ID. We created her a new one. However, we have discovered that she is still connected to my iCloud and we just can't figure out how to go back and unable her ipad to have access to my iCloud! (which is already used for our computers, iPad, Apple TV)
Thanks!
Manon

On the iPad, tap "settings / iCloud". You should see a way to delete the current iCloud Apple ID listed near the bottom. Once it is deleted, just add in her iCloud Apple ID.

HT204053 How do I sign up for all our i phone 5 phones to track the devices

Need help on how to use to track all iphones5 devices

iCloud accounts are individual. Account holders must be 13 or older.

How do I track my iPod serial number using iCloud to find the device?

I need help tracking my ipod I have the serial number just don't know how to find it using I cloud ...help!

Welcome to the Apple Community.
Tracking the device is unrelated to its serial #.
You need to have enabled find myphone on it before it was lost/stolen, you can then track it using find my phone at:
iCloud.com

My friend ipad 2 was stolen if they reset the device in factory setting,just wanna ask if we can still locate the device using find my iphone...mobileme?pls help me,...my friend ipad 2 was stolen if they reset the device in factory setting,just wanna as

my friend ipad 2 was stolen if they reset the device in factory setting,just wanna ask if we can still locate the device using find my iphone...mobileme?pls help me,...

It's unfortunate that your device has been stolen. You can report this to the police, but as has been answered before, if the device is restored you CANNOT locate it.
It probably is technically possible to track your device by the SIM; law enforcement will not waste their time doing so. Besides, the thieves have probably changed it anyway.
While unfortunate your iPad is gone, you really need to move on.

Hi, my iphone 4s got stollen today. is it possible to track?, hi, my iphone 4s got stollen today. is it possible to track?

hi, my iphone 4s got stollen today. is it possible to track?, hi, my iphone 4s got stollen today. is it possible to track? i had no tracking apps on my phone

If you have an iCloud account (or MobileMe) and had the Find My iPhone app activated, you can go to icloud.com and select the Find My iPhone widget. This will show you the location of the phone.
If you did not have the Find My iPhone turned on, maybe there is something that your carrier can do to triangulate the location, but as far as I know if you had no 3rd party software the only way to track the device is through the Find My iPhone portion of iCloud.

Bought a tablet on device installment plan, can no longer bill equipment to account

I recently purchased an iPad mini and bought it on the device installment plan. Then found out that I can no longer bill equipment purchases to my account. I have a spotless payment history. I was planning on buying the iPhone 5 this week and billing it to the account so I could pay for it in January on the December bill (which would be due Jan 17 as my billing cycle closes on the 22nd). I billed an OtterBox (which I got for my iPhone 5, which I am keeping) and I billed an upgraded MiFi device (which I cancelled the online order and VZW put in a ticket to FedEx to have the shipment intercepted and returned to VZW). According to the tracking, VZW received the shipment on Nov 23rd) but VZW says that it has not been scanned in yet as of Nov 27th. I am trying to dispute the charge but have been told that it would be credited when it is scanned in. I don't know what barcode is scanned but FedEX assigned a new tracking number to return the shipment and VZW says that is unusual so I am hoping that they are not relying on the tracking barcode.
I am wondering if the device installment plan disqualifies a customer for billing equipment purchases to the account.

Iowacowboy, thanks for posting. An account cannot exceed $1000 combined bill to account and Device Installment Plan balance. (Bill to account maximum is $400 per account, per month for consumer lines). I hope this helps.^SP

Is it possible to track which itunes account is using my lost iphone 4, through imei/serial number?

I lost my iphone 1 month back. I have been logging on icloud and have been checking Find My iphone regularly. So far the person who took the phone connected on Internet once. When that happened I got an email...but no GPS locations as such. I would like to know whether it would be possible to check (using IMEI or Serial number) which account is using my phone other than my own account...just wondering whether there is something like that. thanks.

No, it is not possible.
Report the device lost/stolen to law enforcement and move on with your life.
FYI, if they have signed in with a new Apple ID or restored it and then signed in with a new Apple ID it will never show on "Find My iPhone" when signed in with any other Apple ID.
Apple does not track lost/stolen devices.

How to track the user who deleted the info object.

Dear Gurus,
In our BI system one info object has got deleted. If I need to track the user who has deleted that how can I track it(in which DBtable). And the complication is one user ID is being used by many people, in this case how can I track that from which machine the Info Object has been deleted(if there is any possibility to track the machines by IP address).
Kindly let me know if there is any procedure to find it out. Your help will be rewarded with a great honour.
Regards
Mohan Kumar

Hi dear,
you have to go in SLG1 transaction, and then select
Object: RSD
Subobject: IOBJ_DEL
External ID: (put here the name of your deleted IO)
Then choose a time range...and voilà, you can find the user who deleted the IO...
Hope it helps!
Bye,
Roberto
About the IP...look at USR41 table, but I think it's a bit difficult fo find data referred to the past...
If you haven't activated logon auditing in SM19...

How can I determine the device number from the task ID

I'm using 'Port Config' to initialize my DIO port for a NI-DAQ 6052E. Port Config returns a task id and it would be very useful if I could determine what device number I have based on the task id.

Hello,
Thank you for contacting National Instruments.
It is not possible to determine the device number programmatically from the task id. This would be slightly redundant since you must supply a device number when you Port Config executes. You could simply create a local variable of the Device Number control that is connected to the Port Config.vi if you need to use the device number elsewhere in your VI. Simply right-click on the Device number control and select Create >> Local Variable. Then right click on the local variable and select change to read. This will allow you to read the value of the device number you provided anywhere in your VI.
If you would rather determine the actual device that is being used rather than the device number, yo
u can use the Get DAQ Device Info.vi. I have attached a simple example program that demonstrates how to use the VI.
Regards,
Bill B
Applications Engineer
National Instruments
Attachments:
Write_to_1_Dig_Port_(E).vi ‏58 KB

Is it possible to track the device installed on FACETIME?

Similar Messages

Maybe you are looking for