Is it possible to transfer PSE11 camera raw adjustments?

I found a thread where it says it's not possible to open multiple images in PSE-11's Camera Raw.  But I would like to transfer the adjustments I make for one image in camera raw to another image.  Is that possible?
Thanks,
Skyzoomer

R_Kelly,  
  May 25, 2013 12:39 AM    in reply to skyzoomer 
You can open multiple camera raw files into pse 11's camera raw (7.4), but i gather from your other post in the camera raw forum
your wanting to open multiple jpeg files into pse 11's camera raw.
One way i can think of offhand is to open your first jpeg, then on jpegs that follow use Previous Conversion from the flyout menu in camera raw.
Hi R_Kelly,
Very observant.  Yes, I was wanting to open multiple jpeg files into PSE 11's camera raw.  But I also wanted to open multiple raw files in PSE 11's camera raw and didn't know how to do that.
My problem in not knowing how to open multiple "raw" files in PSE 11's camera raw was that I only knew how to open "any" file in camera raw by opening PSE 11 and then opening the file using FILE > OPEN AS > SELECT FILE TYPE AS CAMERA RAW and then clicking on an image file (jpeg or raw).
After reading your post, I experimented and discovered that if I select multiple "raw" files in PSE 11's organizer, I can then open all of the selected "raw" files in PSE 11's camera raw by clicking "Photo Editor" in the bottom toolbar.  Then I can indeed apply the same adjustments to multiple raw files at once in camera raw.
But as you pointed out, I can only open one "jpg" image at a time in camera raw but I can apply the adjustments to multiple jpg images (one at a time) by using the fly out menu's "Previous Conversion".
This answered all of my questions in applying PSE 11's camera raw adjustments to muliple images (raw and jpg). 
Too bad there's no way to open multiple jpg images in PSE 11's camera raw.  Out of curiosity, would you happen to know whether it's possible to open multiple jpg images in CS6's camera raw?
Thanks much for your help,
Skyzoomer

Similar Messages

  • Bridge does not show my Camera Raw Adjustments in previews or thumbnails.

    Bridge CS6 on my Mac is not showing my Camera Raw adjustments in a preview pane or thumbnail.
    Here's how it worked until recently:
    I open a .CR2
    I make some adjustments
    I click "Done"
    The thumbnail and the preview show the adjustments I made
    Now, it works like this:
    Open a .CR2
    Make adjustments
    Click "Done"
    The preview and thumbnail don't show all the adjustments. I can't see the results of noise removal, but I can see a drastic change in Exposure
    If I double-click the CR2 file, it opens in Camera Raw, and I see all my adjustments, including noise removal.
    Here's what I've tried, but saw  no difference (I restarted Bridge every time):
    Purge Cache
    Purge Cache for Selection
    Replaced Camera Raw plug-in as described here: Camera Raw 8.4 | No metadata or Camera Raw edit
         (Doing so made Camera Raw disappear in Bridge, so I restored the original file)
    Reset Preferences
    Reset Standard Workspaces
    All the above fixes were inspired by this thread: Re: Bridge CS6 not showing Camera Raw adjustments
    Why don't I see the noise removal effect in the previews? I am sure I saw it a few weeks ago. I rely on that, to help me sort and cull photos.
    I'm hoping there's a preference toggle that I accidentally changed. It's definitely a puzzle. (Version: Bridge CS6 5.0.1.21 5.0.2.4)
    Message was edited by: moonatwork after updating Bridge version. I tried all the above fixes again, after updating Bridge. It actually got worse. I tried replacing the Camera Raw plugin, which failed as before. I then restored the previous plugin, as before, but Bridge now fails to honor the preference, "Double-Click Edits Camera Raw Settings in Bridge" and instead always opens Photoshop.

    Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
    I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
    My specs:
    Bridge CS6 5.0.2.4
    Mac OS X 10.6.8
    16 GB RAM
    65 GB free disk space
    2 monitors, 2 graphics cards:
    ATI Radeon HD 4870
      Type:    GPU
      Bus:    PCIe
      Slot:    Slot-1
      PCIe Lane Width:    x16
      VRAM (Total):    512 MB
      Chipset Model:    NVIDIA GeForce GT 120
      Type:    GPU
      Bus:    PCIe
      Slot:    Slot-4
      PCIe Lane Width:    x4
      VRAM (Total):    512 MB

  • Possible GPU Issues With Camera Raw 6.6

    Over the past day on my Windows 7 x64 workstation I've done some updates.  Specifically:
    The Adobe updater brought in Camera Raw 6.6, replacing 6.5.
    I updated the to the ATI Catalyst 11.12 display driver version from previous version 11.11.
    I allowed Windows Update to apply the dozen or so changes that were pending.
    I was just doing some OpenGL testing with Photoshop CS5 12.0.4 x64 and I noticed that under some conditions I saw Photoshop drop out of OpenGL acceleration.  Specifically, when I opened a Canon 5D Mark II image through Camera Raw I saw subsequent operations stop using OpenGL acceleration even though the checkmark remained in the [  ] Enable OpenGL Drawing box in Edit - Preferences - Performance.
    What I did to determine whether OpenGL acceleration was enabled was this:  Select the Zoom Tool, then click and hold the left mouse button on the image.  When OpenGL is enabled, I see a smooth increase in zoom.  When it goes disabled, I see only a jump in zoom level after letting up the mouse button.  Also, the [  ] Scrubby Zoom box gets grayed out.  As I mentioned, even in this condition, a check of Edit - Preferences - Performance still shows OpenGL enabled.
    Just as a control, I saved the converted file as a PSD, and every time I opened THAT file (with a fresh copy of PS CS5 running) and did the same operations I could not reproduce the failure.  The difference being I did not run Camera Raw.
    Since I wasn't specifically looking for issues with Camera Raw, I am not sure that the problem occurred every time I did run Camera Raw.  I do know that when I open images from my own camera (40D; I do not own a 5D Mark II) that the problem doesn't seem to occur.  Notably I always open my image from Camera Raw to the largest possible pixel size - 6144 x 4096, as I did with the 5D Mark II image, so it's not an obvious size difference that's leading to the issue.  Given other comments of late, I'm wondering if it could be a specific issue with conversions of files from 5D Mark II.
    Nor am I sure whether any of the above updates caused it - it might done this before; I don't regularly convert 5D Mark II images.  I DO think I would have noticed Photoshop reverting to GDI operation before, since I just noticed it pretty easily, but I'm not completely sure of that either.  I do use OpenGL-specific features (such as right-click brush sizing) pretty often.
    I'm trying now to find a set of steps with which to reliably reproduce the problem now, and will advise.
    -Noel

    Figures.  Now I can't reproduce the problem at all, even after an hour of testing.  It probably had nothing to do with Camera Raw.
    I wonder if there are latent GPU status indicators and config values stored by Photoshop based on its specific environment that might not be right for the first run (or first few runs) after a display driver update.  Hm....
    -Noel

  • What is the difference between PSE11 Camera Raw and Lightroom 4?

    Is the version of Camera Raw in Photoshop Elements 11 and Lightroom 4 the same.  Does camera Raw have the same features and look in both applications?
    Message title was edited by: Brett N

    Photoshop and Lightroom basically have the same feature set as far as Camera Raw. Here is a comparison between Photoshop and Photoshop Elements:
    Adobe Camera Raw differences between Photoshop and Photoshop Elements

  • Bridge CS6 not showing Camera Raw adjustments

    I am wanting the adjustments I've made in Camera Raw to show on the thumbnailed images in Bridge CS6, but after I've made the adjustments in CR, it still shows the original/uncorrected image in Bridge.  Help?
    Also, I am wanting to copy+paste the adjustments I've made in Camera Raw from one image to the next, but "Develope Settings ---> Copy Settings" is not highlited in the Bridge menu for me to do so.  Neither is it showing any option to do so when I right click  on the images.
    Thanks!

    APhotography wrote:
    The thumbails are not embedded, and the raw images are highlighted.
    Embedded thumbnails are included in the raw file from cameras.  Question, as Curt Y wrote in reply #1, is whether you are viewing these embedded from-camera thumbnails or viewing bridge-generated hi quality thumbnails.
    What thumbnail quality have you selected in the 'Options For Thumbnail Quality And Preview Generation' button in the Adobe Bridge application bar?  Should be Always High Quality (or possibly High Quality On Demand).  If the selection is set to 'Prefer Embedded (Faster)' you will not see the camera raw changes in the Bridge Content thumbnail images.  Check this selection in your laptop and see if it is same as in your desktop.

  • Camera Raw adjustments not applying to batch process

    Hey friends,
    On a 2008 iMac running 10.5.7, latest version of Camera Raw & Bridge/Photoshop, I opened 650 Canon 5D raw files in Camera Raw, made adjustments to most of those files, then clicked Done.
    In Bridge Im batch processing all the files to Jpeg, now in Bridges thumbnails I can see all the adjustments I did in Camera Raw were applied, but yet when I batch process them, no adjustments are being applied, any idea what the issue could be?

    Thomas Knoll
    1. Jul 28, 2007 5:51 PM in response to:                                     (bp)
    Re: Warning serious issue with ACR edits not updating
    How did you record the Photoshop batch action? Make sure the "Image Setting" item is checked in the setting flyout menu when recording any actions that open raw image if you want each image's setting to be used.
    The preview building process in Bridge has nothing to do whatsoever with the saving of image settings.
    Also, if you are using any PhotoKit product, you need to update to the most recent version.

  • Camera raw adjustments not showing in prints

    I received a call from a technician with a professional processor about an issue I am having with prints that are much darker than what I see on my calibrated screen. The technician was wondering why I would send files that looked exactly like the original files. So he decided to open the files in Adobe Camera Raw and discovered that there were a number of changes in Camera Raw, i.e. brightness, exposure, etc. that were not showing up in the prints, or upon initial inspection of the file! I've been dealing with this issue of dark prints for a couple of years now and I don't know what else to do! The adjustments made to exposure or brightness levels are mostly very subtle in nature because I like to get it right in camera as opposed to major adjustments in Photoshop, but the reason I purchased Photoshop to begin with is to have a tool that will help present my vision as opposed to getting in my way!

    kenmb wrote:
    When you're able to distinguish between ACR and PS Image Processor,
    kenmb,
    You have no reason and no right to be posting snide comments, as you have failed to give us the most elementary information requested.  Your posts so far have been the antithesis of a model of clarity, so we are still in the dark both as to what you have been doing and as to what the exact nature of your problem is.
    Please take a step back and try to calm down.
    At the risk of being insulted by you once again, I'm going to try once more.  After all, I have a thick skin and can hurl insults back with the best and the worst of them. 
    So far you have written about "Adjustments" that the lab workers can detect in Camera Raw and are not being "reflected" on your prints.  This is indeed the Camera Raw forum so, given the paucity of information received from you so far, we can only assume that you are indeed performing adjustments to your images in ACR.
    You then speak of saving your files through the Image Processor.
    Here's the rub: we are missing one step.  Unless you Open an image in the Camera Raw panel (dialog box) by using the OPEN button in ACR after making your adjustments, the adjustments WILL NOT BE applied to the pixels, they will be just stored only in metadata.  That's what happens when you use the "Done" button in the the Camera Raw panel (dialog box).  That does you no good, especially since your lab will be using a non-Adobe application that cannot read the adjustments embedded in your file.  When you do that and then proceed to use the Image Processor to batch process your files and save them for the lab, you end up with files the pixels of which have not been touched, despite being saved by the Image Processor.
    Let's for a moment forget about batch processing and let's concentrate on what needs to be done to a single individual image:
    First, you need to use ACR to perform your adjustments on the image.  When finished, you need to click on the "Open" button in the ACR panel (dialog box).  <—— THIS is the step that actually applies your adjustments to the pixels.  Then the image will be opened by Photoshop and kept in RAM only until you actually save it in Photoshop, before using the Image Processor on that file.  You now have a saved file to the pixels of which your adjustments have been directly applied.  ONLY THEN can you use the Image Processor on that and other files similarly saved already.
    If you run the Image Processor on files with adjustments embedded in metadata as opposed to adjustments applied to the pixels themselves, only Adobe software such as ACR, Bridge and Photoshop can detect the embedded adjustments, but non-Adobe software (like the one used by your lab to print, e.g a RIP) will not be aware of the existence of the embedded adjustments.  That's why the lab staff can see the adjustments when they use Adobe software (ACR) to view the images.
    It's a combination of the missing step of Opening and Saving the image files in ACR before using the Image Processor and the lab using non-Adobe software that is generating image files with embedded adjustments in metadata which are being ignored by the printing application used by the lab.
    If you disagree with any of the above, I would hope that you take the time to explain exactly what you're doing, rather than resort to throwing tantrums and insulting people who are only trying to help you.

  • Camera Raw adjustments not applying

    Hi everyone, Im on a mac using Photoshop CS4, Camera Raw 5.0.
    In Camera Raw I made adjustments to about 277 Canon CR2raw files then hit Done, so the adjustments would take place, then In Photoshop I batched the 277 files to Jpg output,and I noticed that the adjustments I made in Camera Raw did not take effectinthe batch process, Am I missing something or doing something wrong? I do this same process in CS3 without issue.

    Thomas,
    Could you explain in more detail exactly how you are doing the batching? Are you using Image Processor? Are you generating Jpegs directly from within ACR? Are you using Photoshop>Batch from Bridge?
    If I remember correctly there are some specific "gotchas" related to using Photoshop>Batch. Jeff talks about this in his book. I think it is related to the "Overide action open" option. One way uses the same recipe for all images in the batch and another way uses each image's recipe. Something like that.
    If all you are doing is converting to Jpeg, I strongly recommend using Image Processor or Russell Brown's 1-2-3 Process (Image Processor + a few additional options).

  • Show stopper: can't import tiff files with camera raw adjustments

    For RAW NEF files (coming from a Nikon D80), Aperture doesn't pick up adjustments I've made in ACR (Adobe Camera Raw) when I import them, even though the .xmp "sidecar" files are sitting there in the folder next to the them. Do I have to do something to get Aperture to pay attention to the .xmp files?
    Similarly, Aperture doesn't read ACR adjustments I've made to TIFF files. I've read on the web that adjustments made to TIFF files cannot be stored in "sidecar" xmp files. That's clearly true since I don't see the .xmp files sitting next to my tiff files in my image directory -- but my ACR adjustments are stored when I reload the TIFF files in ACR.
    In any case, Aperture doesn't seem to recognize either RAW files with sidecar .xmp info, or TIFF files that have ACR adjustments baked in.
    This is a show stopper for me and I'd love to use Aperture for its 'Faces' functionality. Does anyone know a fix for this issue?
    Thanks!
    Raphe

    Thanks for the reply, Kirby
    the kind of conversion you are talking about is likely a pipe dream.
    I gave it a quick look myself just now. the .lrcat file that lightroom has isn't binary & looks just like a huge list of adjustment data for entries in the database. For example, the curves on one of my images looks like this:
    ToneCurve = { 0,
    0,
    37,
    38,
    93,
    148,
    167,
    223,
    255,
    255 },
    So it wouldn't be difficult to write a .lrcat > .xmp exporter (basically going back from one Lightroom database to many .xmp files) or a batch .xmp > .lrcat exporter (going from many .xmp files to one Lightroom database).
    Looking at the contents of Aperture's .aplibrary package, there's an xml record of all files entered in the database, and I found what looks like image edits in the 'versions' folder -- but unfortunately the edits are stored in a binary format.
    Oh well, I guess this is why Aperture is a bit faster than Lightroom -- but will make it very difficult to write a converter to get edits into Aperture. & unless Apple adds edit info to their .xmp sidecar exporter (Export Masters) & includes a batch mode.. we wont be able to get info out of Aperture. So, for the moment, this apparent lack of an open format keeps Aperture from being a professional tool imho, compare to Lightroom.
    ..but for me there's no reason to switch from ACR to Lightroom because there's no facial recognition, and the curve editing utility is better in ACR.
    Thanks for the comments, David.
    I'll be sticking with ACR/Bridge for now -- I'd rather not split my library -- & hope that Lightroom adds some facial recognition functionality
    Besides this, Aperture seems like a really nice product.
    Cheers,
    Raphe

  • My Photoshop closes when completing my camera raw adjustments.

    What is the fix when my Photoshop CC unexpectedly closes when completing RAW processing?

    Generally, not really any problems, but you need to check and see if your mac can be upgraded and also as i mentioned before , if you
    use any applications that need Rosetta (a PowerPC emulator), then they won't work on mavericks.
    specs for mavericks
    OS X Mavericks: System Requirements
    OS X - Upgrade to Mavericks - Apple Support
    If your able to do the mavericks upgrade, then yes, you can use photoshop elements 12 or photoshop cs6 with the latest camera raw updates.
    Photoshop cs5 and the 8.6 dng converter should work on mavericks as well.
    If for some reason your machine doesn't meet the specs or you don't want mavericks, you probably can still upgrade to 10.7 lion or 10.8 mountain lion, but they are paid upgrades.

  • PSE11: Camera Raw 7.2 Update - Error Code: U43M1D204

    Hi all
    I uninstalled PSE10 from my notebook (Win7, SP1, 32-bit) and installed PSE11. Afterwards, I went to Help - Updates in order to install the most recent raw update. However, nothing seems to happen afterwards. I see "currently downloading" but the progress bar does not move. After a while, it terminates with the following error message:
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1D204
    I uninstalled PSE11 and re-installed it. Also, I deleted the content of the folder in AAMUpdater/1.0/ but this did not make a difference either. Unfortunately, the update file is not available for download yet (http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows).
    I would appreciate if anyone could help me. I bought a new camera recently which requires this particular update.
    Thanks & Regards
    Paul

    Delete the folder 1.0 (or simply cut-paste it on Desktop for sake of not losing it, just in case the solution doesn't work) from following location on your machine and try updating again.
    C:\Users\<username>\AppData\Local\Adobe\AAMUpdater\1.0
    Error happens when AAM is incorrectly installed for some reason.
    Let me know if this doesn't work.
    Thanks
    Andaleeb

  • Bridge freezes when applying camera raw settings to large number of files

    I have a folder with 32,000 frames from a time-lapse project that I'm doing. I'd like to apply the same camera raw adjustments to all of these files, and so follow one of the two methods below - neither of which are working with such a large set of files:
    Method 1:
    Select all files, open in camera raw.
    Apply changes to the first image
    Select all images, then synchronize the changes to all other images.
    Unfortunately selecting "Open in Camera Raw..." just leaves bridge to hang. It's using a lot of memory and processor time, so I would assume it's working, but there's no progress bar or similar to indicate that it is.
    Method 2:
    Open first file in Camera Raw
    Apply all changes, and exit camera raw.
    Select all files in Bridge, right click on one and select "Develop Settings -> Previous Conversion"
    Unfortunately the final step again leaves bridge just thinking. I waited around an hour, closed bridge, but unfortunately when I opened it again there was no sign that it had copied the camera raw settings onto any of the other files. My computer's pretty slow (see below) but it should have written one xmp file in an hour.
    Question:
    Does anyone have any workarounds other than repeating the process 32 times for 1000 images at a time?
    System Info From Photoshop:
    Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
    Operating System: Windows Vista 64-bit
    Version: 6.0 Service Pack 2
    System architecture: AMD CPU Family:15, Model:15, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3
    Physical processor count: 1
    Processor speed: 1808 MHz
    Built-in memory: 8062 MB
    Free memory: 4508 MB
    Memory available to Photoshop: 7140 MB
    Memory used by Photoshop: 70 %
    Image tile size: 132K
    Image cache levels: 4
    OpenGL Drawing: Disabled.
    OpenGL Drawing Mode: Basic
    OpenGL Allow Normal Mode: False.
    OpenGL Allow Advanced Mode: False.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce 6150SE nForce 430/PCI/SSE2
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1024, right: 1280
    Video Card Number: 1
    Video Card: NVIDIA GeForce 6150SE nForce 430
    OpenCL Unavailable
    Driver Version: 8.17.12.7533
    Driver Date: 20110521050100.000000-000
    Video Card Driver: nvd3dumx.dll,nvd3dum
    Video Mode: 1280 x 1024 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce 6150SE nForce 430
    Video Card Memory: 128 MB
    Video Rect Texture Size: 4096
    Serial number: Tryout Version
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\MARTIN~1\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      H:\, 279.5G, 50.4G free
      D:\, 149.0G, 108.1G free
      E:\, 74.5G, 46.1G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1642  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   5,0,10,0  
       AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
       BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Camera Raw 7.0
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Dicom 13.0
       Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Embed Watermark 4.0
       Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Extrude 13.0
       FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mezzotint 13.0
       Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Pinch 13.0
       Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0
       Shear 13.0
       Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Sumi-e 13.0
       Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Underpainting 13.0
       Vanishing Point 13.0
       Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

    The files are only 2MP each, and I have the same issue when I apply the changes to RAW files and JPG files. The error occurs though before any changes are applied, before the images would need to be recached, as when the error doesn't occur the dialogue box I mentioned pops up asking what to change.
    Your specs sound more then enough I would think. Do you have set the option to Write cache to folders when possible and if so could you uncheck that option?
    I don't have experience with this kind of numbers but I do dump the Bridge cache manually on a regular base (every new cycle it seems to be more stable so more interval in the periods of dumping cache) but my main folder contains usually around 6 to 7 K of DNG files from 21 MP dSLR. This starts caching without problems but takes a few hours before done.
    Can't use the option cache for folder due to a longstanding problem with error message to replace the CacheT file, hence my question about your setting.
    Also I have set the option to previews Always HQ and in the prefs have set the option to build monitor size previews.
    As said, don't know the large numbers but the 2 MP files are very small and it should be possible for Bridge I would think?
    Did you also try to create a new folder and place the files inthere. Or divide them in to three folders for testing?

  • Cant Open Camera Raw file in PSE8

    Hi Folks
    Please help ?.. I have recently purchased PSE8 for the Imac. I cant open my Camera Raw processed Images in PSE8. My workflow is very simple > Bridge > Select Image I want to work on > Open in Camera raw > alter Image > Select Done when finished > which returns me to Bridge with the Altered Image added to Bridge > click on the Image I processed in Camera Raw to Open in PSE8 > PSE8 opens but with the ordinal unprocessed image, I can not get the Image processed in camera raw to open at all in PSE8 ...
    So is it actually possible to open a Camera Raw processed file in PSE8 and if so how ?
    Many thanks folks for any help you may have with this..

    Hi Barbara
    Does saving the file in Camera Raw alter the original file in Bridge or does it save a completely new file in Bridge with the changes ? As I do not want to lose any of the files in their original state.
    Thanks for your help.

  • Export Camera Raw sidecar XMP from DB

    Hi
    I forgot to change my options for xmp sidecar files in bridge last time I installed it. For a good two months it's been saving xmp data in the camera raw databse instead of in sidecar XMP files.
    Now I need to move a whole bunch of raw files to a new computer and I don't want to lose all the camera raw adjustments. Is there a trick to write out the info it has in the databse to XMP files along with the corresponding raw files?
    As a last resort, would it be possible to import the existing xmp data in the DB on computer 1 into a already existing DB on computer 2?
    thanks

    ACR has an Export Settings to XMP menu item in the menu available by clicking the arrow-and-three-lines icon at the right of the title area of the tabs in the right panel of ACR.
    On my Windows 7 computer the camera-raw database file appears to be:
    C:\users\yourusername\AppData\Roaming\Adobe\CameraRaw\Database

  • Camera raw in cs3

    I have creative suit cs3, and a new camera canon 70D, i cant open my raw files in photoshop. what do i do. is it possible to update my camera raw??

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    You are hopelessly behind the times. If you want to open the files directly, you need a new Photoshop, which would be most efficiently done by signing up for the Creative Cloud Photography plan.
    Mylenium

Maybe you are looking for

  • PO no not reflecting in GL/ Vendor line item display

    Hi Guys, Please let me know that why PO no (column is displaying but) data not reflecting in GL/ Vendor line item display using TCode FS10N? What may the possible reasons and how I can get the data flow in the column?

  • Badi for PO ME22n

    hi, I am using the BAdi ME_PROCESS_PO_CUST for PO enhancement.I a want to change the Netprice field into display if the the Gr is being done for that line item while checking in the MKpf Table.But when i use the breakpoint at the FIELDSELECTION_ITEM

  • How do I list a 10.5 server user blog/podcast on iTunes Store?

    It may be simple but even Enterprise support sent me here to ask. I just had to reinstall my entire server thanks to the 10.5.6 update. I had a blog setup before as a static website and manually updated it using iWeb and then <ugly> I added all the i

  • Returning String[] from C program

    How can I return a string[] from a cprogram to a java program? private native String[] readRFIDData(); JNIEXPORT jobjectArray JNICALL Java_RfidDM_readRFIDData (JNIEnv *, jobject); Above is the definition of a jni method . I have gone through the samp

  • What happens when the NeverFail method, well, does?

    Okay, so I'm still a relative newbie to GB3, so plenty of room for user error here, and I have read and implemented the Never Fail method of correcting the pacing of audio imports. And on my first two imports as part of my first podcast, that worked