Is it possible to trigger backups of callmanagers, and application servers from prime collaboration?

I have prime collaboration assuarance and analytics version 10.5 installed in my LAB setup. I could not see any other options other than the backup option under the administration tab; I beleive this option is to schedule and run backups for prime collaboration. Wonder if we have some options to trigger backups for call managers and other application servers...any help is much appreciated....cheers

Hi,
I doubt that is possible.the below link talks about
Performing Backup and Restore for Prime Collaboration Analytics
Prime Collaboration Analytics allows you to perform backup and restore, while you continue to use the Prime Collaboration Analytics GUI. However, until the backup is complete, the data displayed in the GUI may not be the latest.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-5/analytics/guide/Cisco_Prime_Collaboration_Analytics_Guide_10-5/bk_Cisco_Prime_Collaboration_Analytics_Guide_10_chapter_011.html#task_D50DB08C00134388AE2AC30AE0536371
regds,
aman

Similar Messages

I have about 130 gigs of movies on my iTunes and was wondering if I can just put them on my backup hard drive and remove them from my main computer to free up the space

I have about 130 gigs of movies on my iTunes and was wondering if I can just put them on my backup hard drive and remove them from my main computer to free up the space.

I haven't done this with an external drive, but I would imagine it works the same way as if you have multiple internal drives. Also hopefully it works with less headache in OSX than in windows.
Anyway, move all your music over to your external, and then go into itunes -> preferences -> advanced -> iTunes media folder location. Navigate to your drive, and pick the folder you want. Ensure that your folders are set up like they are in your ~/Music/iTunes folder, or wherever your iTunes is currently pointing. Then quit and restart itunes. If your music doesn't show up, try dragging your music folder from your external onto itunes, and it will hopefully update your library.xml.
As far as Jerry's problem goes, you could try adding another music folder to your library.xml, but I really have no idea whether this will work or not. If you want to give it a try (can't promise you won't corrupt your library.xml, so make a copy beforehand) you can find the music folder xml element right near the top of the xml file (open it with textedit/textmate/whatever text editor you want (NOT WORD)). Curious to know if this works, and if it doesn't I have other ideas so let me know.

Is it possible to make a video preview and export it from edge animate?

is it possible to make a video preview and export it from edge animate?

Hi Johan,
If you are looking to export video through Edge Animate.
Well, there is no direct way to do it but you could use a screen recorder to make an mp4. Then you can import the mp4 in PS and if you have the plugin for gif then you just save aa a gif.
Regards,
Devendra

Scheduling automatic Backup of Database and Application

Hi,
Can anyone post the step by step process and methods to Backup my database and how to make recovery.
I am using oracle10g db Application express .
I am also using oracle enterprise manager 10g for scheduling email alert processes.
platform : windows xp
Thank You.

Hi,
sorry for the late reply...
I anot using an Express edition oracle XE .. its personal edition..that too on windows xp platform...
so i need a way of automating the backup... like weekend or midnight(daily)..
will oracle enterprise manager be helpful for this? and how?
thank you.

Script example trigger web service call and populate request from adobe

Hello,
I'm trying to make a adobe interactive form that needs to be populated by a web service. I have one field : In the dataconnection that is the input for the web service request and this is bound to the request. I have a button that is connected to my web service. After filling in a new value and pushing the button I want the web service request to be triggered.
Thus anyone has a coding example or more information about using web services directly from within a Adobe Interactive form ?
thnx, Jasper

Hi Jasper,
You may refer the Adobe ddevelopment center for the docs related to the execute property of the button to trigger a web service.
<i>Alternatively, if you do not want to create a button to execute a call to a Web Service, you can do it via Script.
Assuming your Data Connection is named LeasePayment
For JavaScript:
xfa.connectionSet.LeasePayment.execute(0);
For Form Calc:
$connectionSet.LeasePayment.execute(0);
execute(0) indicates no data merging
execute(1) indicates all the data in the data DOM will be remerged.</i> - Adobe doc.
hope this will help.
Thanks andRegards,
Anto.

Is it possible to detect change of date and/or resume from standby?

Hallo you all,
in our current project we have a java remote application and a server application connected via GPRS.
Both client and server must have a system time sinchronized with a tolerance of maximum 15 minutes.
The problem has been solved simply making a datetime check during login: server sends it's current datetime
to client and then client make the time check. All right.
The problem is that after login the user (on client app) is able to change the system time and then... the sinchronization is lost!!
My first solution: I have a background thread that each 5 seconds make a time check: if in two consecutives checks
the difference is greater that 15 mins then I assume the the user has changed the system datetime and I raise a non recoverable exception
and the client aplication is closed.
Problem: if the system goes in stand by (laptop or hand held device) then at resume I have a time difference that can be greather than 15 mins.
Question: is there a way to understand if system wake up from stand by or if a system time has been changed?
In my tests the case of system date change and the case of sysm resume from stand by are identical from point of view value of Java current date.
I found no real to this question...
Thanks in advance,
Franco.

It sounds like you're trying to synchronize multiple system clocks.
Why not using an existing solution such as NTP for this?
It sounds as if your application is trying to do many things at once.

Possible to have certificate with out any application servers

Hello All,
I need to make an https call to a remote system from my windows machine. My system has only j2sdk1.4 environment and no application servers in my side. My remote system expects me to send digitally sign the data and sent along with the certificate of mine. My question is
1. Do we need to have any application server in my side if we get the certificate from CA? Can't we have that certificate installed in my windows system.?
2. When getting the certificate from CA, I hope we get private and public key. How to sign the data using the private key ? (If iam not correct pls tell me what we get from CA?). Any api's available?
3. I need to send the certificate along with the signed data in xml structure like
<Request>
<certificate> ........</certificate>
<signed data>.......</signed data>
</Request>
How i can store the certificate in the xml element? Since i have not seen any certificate, is that certificate is like lengthy number like "abc345234re"?
I would be very thankfull to you if i u could help me out in this crisis.
Tons of thanks in advance.

1. Do we need to have any application server in my
side if we get the certificate from CA? Can't we have
that certificate installed in my windows system.?Yes
2. When getting the certificate from CA, I hope we
get private and public key.No. You generate the key pair locally; you extract the public key in a certificate; you send the certificate to the CA to be signed; you get it back signed from the CA; and you import it into your keystore. [That way nobody but you has your private key.]
How to sign the data
using the private key ? (If iam not correct pls tell
me what we get from CA?). Any api's available?Use the javax.xml.crypto.dsig package in the Java Web Services Developer Pack from Sun.
3. I need to send the certificate along with the
signed data in xml structure like
<Request>
<certificate> ........</certificate>
<signed data>.......</signed data>
</Request>
How i can store the certificate in the xml element?The JWSDP does all this for you.
Since i have not seen any certificate, is that
certificate is like lengthy number like
"abc345234re"?Yes, but you don't need to care. It's base-64 encoded into the XML by the API above.

Is it possible to trigger the acquisition and recording of data in this condition?

Hi
I am a LabVIEW newbie,
Is it possible to trigger the data acquisition and recording in the following case;
I have two input signals 1. Pressure Transducer 2. Pulse from a magnetic pickup.
I have to plot the pressure data against the pulses. Can I make the magnetic pickup signal as master signal to trigger the data acquisition and recording? and at the same time acquiring the pressure data as well.
How can I do that ?
Thanks.

Hi Rich
Thanks...
I have PCI - 6033E High resolution multifunction I/O board and NI BNC - 2090 adapter chasis.
What I am getting is the pressure from the transducer and magnetic pulses.
Two cosecutive pulses encompass one complete cycle of the combustion process inside the engine.
I need to record the data for presenting the information offline.
Since combustion is a highly unstable process I need to get the optimum representative grapgh at a particular engine speed.
So lets say, I want the magnetic pulse to trigger this the data acquisition for 50 of such pulses, i.e. 50 complete cycles of diesel engine. So that these 50 acquired cycles may be averaged for pressure readings and a single representative curve (graph) may be produced.
Thanks again
Message Edited by SeaMist on 06-26-2008 02:49 AM

Backup and data transfer from old to new iphone

I recently upgraded to the iphone 5s from iphone 4 and need to backup and transfer data from old phone to the new phone. I want to backup using itunes rather than using icloud. Do I need to disable icloud backup on the old phone before I start the backup process. Do I need to disable anything on my computer (icloud). I am using Windows Vista and Itunes Version 10.7. Would appreciate step by step instructions for backup and transfer.. I am not computer or iphone saavy and don't want to mess things up.

If you backup with iTunes and you restored from the backup and the data are gone, then there is no where to retrieve them from unless you have another backup that contains those data.
Launch iTunes on the computer and go to iTunes>Preferences>Devices. You will see a window with all of your backups listed in it.
If you see a recent backup that you are certain contains the data that you need, recover deleted data from iPhone backup.
If your note is gone from iCloud.com there is only a few ways to possibly recover it.
The first things I would check is a iCloud Backup, a iTunes Backup, or a 3rd party email that may have contained the note. To restore from a iCloud or iTunes backup follow this link. This article explains how to restore a device from either back up.
Note if you have backed up since the note went missing, you will not have the note on the backup. Make sure you do not back up if trying to restore from a back up as this will back up the content without the note.
To get to the "Set up assistant" on an iOS device, you must go to Settings>General>Reset>Erase All Content and Settings. Once the phone restarts, you will be at the "Set up Assistant"

Is it possible to deactivate a button on the application toolbar?

Hello everybody!
Is it possible to deactivate a button on the application toolbar from standard transaction like PA40?
I'd want to do it using an user-exit.
Thanks in advance.
Cristian

there is a push button on the std tool bar of pf-status 'Function code'.using that u can activate and deactivate teh function codes
or
Check this FM : RS_SET_SELSCREEN_STATUS
sample code :
DATA: BEGIN OF i_exc OCCURS 0,
code LIKE sy-ucomm,
END OF i_exc.
DATA: ws_repid like sy-repid.
CLEAR i_exc.
i_exc-code = 'ONLI'.
APPEND i_exc.
MOVE: sy-repid TO ws_repid .
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = ' '
p_program = ws_repid
TABLES
p_exclude = i_exc.

Is it possible to use backup files previously copied to an external hard drive to backup an iPhone?

My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?

Garageband can't use VST plugins.
If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

HT1414 is it possible to copy backup taken from my old iphone to the new one?

is it possible to copy backup taken from my old iphone to the new one?

Sure you can, as long as you still have the old backup.
I have restored my iDevices (iPod Touches, iPads and iPhone) from backups a number of times. I've done this long after the devices were setup. Sometimes I restore from a backup because I have tweaked a setting and it screwed something up on my device so I restored from a backup in order to restore the previous "non-tweaked" setting back to the device.

HT1766 is this possible tto take backup of sms from iphone 3gs to computer??????

is this possible tto take backup of sms from iphone 3gs to computer??????

You may use 3rd party software to take backup of your messages. You will also be able to read them.
http://www.digidna.net/products/diskaid
http://www.wideanglesoftware.com/touchcopy/index.php

Is it possible to backup just SMS and contacts only

Hi everyone,
I have just restored my IPhone 4S using Recovery Mode and things went well.
Then i restored my data from a saved backup and after it my phone goes back to the same problem (connecting to internet via cellular data)
I am thinking to run the process again but wondering if is possible to take a backup of SMS and contacts only so that i get them later...

Well, thanks anyways

Is it possible to trigger backups of callmanagers, and application servers from prime collaboration?

Similar Messages

Maybe you are looking for