Is it possible to trigger FIPP event (and how?) when parking an FI document

Hello
I wander is it possible to trigger FIPP event (and how?) when parking an FI document with transaction fbv1(and not fv60)
Thx in advance

Hi,
In Financial Accounting --> Accounts Receivable and Accounts payable >  Business Transaction> Incoming Invoices/Credit Memos  --> Make and check settings for Document Parking -->  Create Workflow Variant for Parking Documents (Click  this)
There you have to assign your workflow.
Regards,
Surjith

Similar Messages

  • Is it possible to trigger an event when clicking context menu trigger icon?

    When opening a context menu on a UI element, is it possible to trigger an event to handle, eg. set the lead selection for this context element to which the UI element is bound, when clicking the menu trigger icon ?

    First, these NW04s menus are not really context menus. They are static menus that are rendered within the view layout. Real context menus will come later.
    There is no "onMenuOpen" event for an application.
    Armin

  • Is it possible to save an Event and the informations attached to his medias (favorites, Keywords, Notes) on an external disk where I saved the first version of this Event, without re-copying the all medias on a new Event called fcp1?

    Is it possible to save an Event and the informations attached to his medias (favorites, Keywords, Notes) on an external disk where I saved the first version of this Event, without re-copying the all medias on a new Event called fcp1?

    If they both have the same media, you can just copy the CurrentVersion.fcpevent file.  But then you have two databases with the same UUID, and FCP X will only open one of them.  If you use Carbon Copy Cloner, you can clone just that folder to the external drive, and set it up to only update files that are newer or have changed.

  • Trigger a event and send an email  when a new entry is created in a table

    Hi All,
                I have scenario here where i want to trigger a event and send an email too when a new entry is created in a Ztable or an existing entry is changed.
    Please let me know how can i achieve this.
    Please excuse me if you find it basic as I am not very old in Workflows.
    Thanks in Advance,
    Saket.

    Hi..
    For your Requirement workflow not Required.
    Write a  Program to send Mail. This Program has to execute when ever the Save Button is Click, then the mail will be sent.
    Check the program in this [link|https://wiki.sdn.sap.com/wiki/x/nYKdAw ], which send the mail.
    Regards,
    Surjith

  • Is it possible to chenage logical system and how after a system is beeing u

    Hello
    I wander is it possible to chenage logical system and how after a system is beeing used for a while and how?

    Hello Tina,
    If the system is NOT a production system transaction BDLS can be used to change the logical system.  This would be necessary after refreshing a dev system from a production system, for example.
    If the system is a production system, I would agree that this is NOT advisable.
    Regards
    Greg Kern

  • Dose the serial number need to be changed and how when selling Adobe Photoshop Elements 9

    Dose the serial number need to be changed and how when selling Adobe Photoshop Elements 9

    No, the serial number goes with the product. You should deactivate all your installed copies before selling it. Also, if you've used it qualify for upgrade pricing on a later version you can't sell it. Well, you could but the new owner won't be able to install it.
    Adobe does have a license transfer document, but not many people bother with it:
    Transfer an Adobe product license

  • Hello, I have updated to the newest Pages and yet when I open a document to use it says, "You need a newer version of Pages to open this document." When I got to install it again it says I have already done that. Anybody have any tricks? Thanks!

    Hello, I have updated to the newest version of Pages and yet when I open a document to use it says, "You need a newer version of Pages to open this document." When I got to install it again it says I have already done that. Anybody have any tricks? Thanks!

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
    Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has not only managed to confuse all its users, but also itself.
    Note: Apple has removed over 95 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • Is it possible to trigger the acquisition and recording of data in this condition?

    Hi
    I am a LabVIEW newbie,
    Is it possible to trigger the data acquisition and recording in the following case;
    I have two input signals 1. Pressure Transducer 2. Pulse from a magnetic pickup.
    I have to plot the pressure data against the pulses. Can I make the magnetic pickup signal as master signal to trigger the data acquisition and recording? and at the same time acquiring the pressure data as well.
    How can I do that ?
    Thanks.

    Hi Rich
    Thanks...
    I have PCI - 6033E High resolution multifunction I/O board and NI BNC - 2090 adapter chasis.
    What I am getting is the pressure from the transducer and magnetic pulses.
    Two cosecutive pulses encompass one complete cycle of the combustion process inside the engine.
    I need to record the data for presenting the information offline.
    Since combustion is a highly unstable process I need to get the optimum representative grapgh at a particular engine speed.
    So lets say, I want the magnetic pulse to trigger this the data acquisition for 50 of such pulses, i.e. 50 complete cycles of diesel engine. So that these 50 acquired cycles may be averaged for pressure readings and a single representative curve (graph) may be produced.
    Thanks again
    Message Edited by SeaMist on 06-26-2008 02:49 AM

  • How to define custom event and how to trigger the defined event

    hi,guys
    hurry issue....................hope get help.
    I am using oracle weblogic 10gr3 portal.and we choiced java portlet.as of now,we got some question about custom Event.hope you can give some idea....
    thank you so much.
    question detail:
    1.for java portlet ,how to define custom event.
    2.how to trigger this event.
    3 about the data,may be sometime need to transit Biz data.
    auctully,I just want to implements between two portlets communicate.
    for example:
    existing portletA,portletB.
    portletA is a list,like:
    A AA <button>
    after I click this buttom,then portletB will be effect,it means they are interact with each other.
    does anybody hit this issue before,if you solved pls share me .
    thank you for you help....

    Hello,
    Please note that everything below applies to JSR168 portlets ONLY- JSR286 portlets and other portlet types handle events a little differently.
    From inside your JSR168 portlet you can send an event during processAction or when receiving another event by using the PortletBackingContext object, such as:
    import javax.portlet.ActionResponse;
    import javax.portlet.ActionRequest;
    import javax.servlet.http.HttpServletRequest;
    import com.bea.netuix.servlets.controls.portlet.backing.PortletBackingContext;
    public void processAction(ActionRequest actionRequest, ActionResponse actionResponse)
    HttpServletRequest httpRequest = (HttpServletRequest) actionRequest.getAttribute("javax.servlet.request");
    PortletBackingContext portletBackingContext = PortletBackingContext.getPortletBackingContext(httpRequest);
    portletBackingContext.fireCustomEvent("customEvent", "This is a custom event");
    To receive an event, in your .portlet file you just need to put in a "handleCustomEvent" tag specifying which method to call when the event is received, such as:
    <?xml version="1.0" encoding="UTF-8"?>
    <portal:root xmlns:netuix="http://www.bea.com/servers/netuix/xsd/controls/netuix/1.0.0"
    xmlns:portal="http://www.bea.com/servers/netuix/xsd/portal/support/1.0.0"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://www.bea.com/servers/netuix/xsd/portal/support/1.0.0 portal-support-1_0_0.xsd">
    <netuix:javaPortlet title="Listening Portlet" definitionLabel="yourPortletName">
    <netuix:handleCustomEvent event="customEvent" eventLabel="customEvent" filterable="true" description="custom event handler">
    <netuix:invokeJavaPortletMethod method="processCustomEvent"/>
    </netuix:handleCustomEvent>
    </netuix:javaPortlet>
    </portal:root>
    Then, in your receiving portlet the method "processCustomEvent" would receive the event, such as:
    public void processCustomEvent(ActionRequest actionRequest, ActionResponse actionResponse, Event event)
    The event payload can be any Serializable object you want, but for forward-compatibility with JSR286 it would be ideal if it had a valid JAXB binding.
    Kevin

  • Start workflow with f. module to trigger event and how to pass data to BOR?

    Hi,
    I have a custom BOR object, with Event "Created". I have also an attribute in this BOR, just simple field Plant.
    I have prepared a custom Workflow which is triggered when event Created of that custom BOR business object is raised.
    To raise an event and to start a workflow I run f. module SAP_WAPI_CREATE_EVENT.
    I have a problem to pass a Plant value to the Workflow container. In the PFTC_CHG for my Workflow I made the container
    of BOR object, and the data binding &_EVT_OBJECT& => &MATREQ&  (symbol of my BOR).
    Below both of EVTOBJECT and MATREQ I can see my field Plant.
    Then I run f. module SAP_WAPI_CREATE_EVENT with tables parameter input_container.
    I try to fill the data in many ways, but the started workflow does not have Plant filled.
    I try to use '_EVT_OBJECT.WERKS' in field name for input_container parameters.
    Business Object is passed to the Workflow container, but I do not get the fields
    as attributes. Do I have to use the parameters for the event Created ?
    Thank you in advance
    Wojtek

    Hello,
    I've never used GUID as a key but I suppose the principles are the same - the object instance is equivalent to "something", say a widget.
    This widget has attributes, e.g. the factory where it was created, the day it was created, its weight etc.
    If you make a widget BOR object and you specify attributes then you're telling SAP how, given the key, it can deduce the value of the attributes. Widget 1234's weight can be looked up in table XXX by doing this select.
    If you pass an object instance to a workflow then all you need to pass is the type of object and the key, the rest can be done by the workflow (or any other program). It can instantiate the object, and the attribute values are immediately available.
    If you can instantiate the object in SWO1 and the attributes get values, then it should work in the workflow as well.
    If not, please provide the code of the attribute or describe how it finds the attribute value.
    regards
    Rick Bakker
    hanabi technology

  • Trigger an Event in PI when IDOC is created

    Hi Expert ,
    I  am working on a inbound scenario where multiple IDOC is created from one XML file .  When the IDOC is getting posted in ECC then its taking time to get processed . IDOC is getting processed by a batch job RBDAPPO1 and it is scheduled after every 30 min so IDOC processing is delayed for 30 min if it is getting posted just after the completion Job . We can't increase the frequency of job at its taking lot of resource .
    So is it possible to create an event when IDOC arrives in ECC which will run the job program i.e instead of running the background job at scheduled time is it possible to raise an event while posting IDOC so RBDAPP01 can be run just after the IDOC is received in ECC.
    There is an option of Process IDOC immediately in parter profile but we don't have to go for that as at one time lots of IDOC is being posted in ECC.
    Regards,
    Saurabh

    Hi,
    interesting topic !
    I add two info:
    1. By using a dummy idoc or a proxy call (interesting idea) to trigger a job, be careful of one point: in PI, when idocs will be sent to ECC... well... PI will use different queues (SMQ2)... And so maybe your dummy idoc will use a "faster" queue and will arrive before all the other idocs. and the result will be not this one that you want !
    Solution: EOIO by specifying a unique queue... but in that case, if there is a pb between PI and ECC, it's ALL the next exchanged of this interface which will be in status "wait inside the queue"... until you solve the first error.
    2. with you dummy idoc, How to trigger a job to run your idocs... it's "easy", it's just in the function module linked to your dummy Idoc, that either you run directly RBDAPP01 with your specific Message Type, idoc type, parter, date, etc... (*) or your program create a job which to the same (personally I prefer this solution).
    (*) as suggest by another guy, do a generic "dummy idoc".
    Regards.
    Mickael

  • L7680 All-in-one, won't pick up paper and print when sending MS word Document to printer

    This printer has worked great for over 2 years. If I do a print test page it works fine. It prints out a fax confirmation page fine. When I send a document from MS word to printer I can hear it trying but it won't pick up paper. Says empty, add paper yet there is paper in bed. I have done all the  tests suggested by HP. partial reset, tried reloading software, cleaning, adjusting, etc. Any Ideas would be appreciated

    Hi,
    From your post, you indicated "cleaning"... have you cleaned the rollers as described in step 4 of this document?
    Printer doesn't pick up paper
    Paper fiber "build up" occurs on older printers and rollers occasionally need cleaned.
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • Colored photos turn black and white when opening a new document in Photoshop. [was: help]

    my colred photos turn black and white whenim opeing a new document in photoshop.'

    You don't have the right color mode selected.

  • Is it possible to get an event notificati​on when a file is changed ?

    Dear,
    I have to do something on a file or folder when this is changed from outside the program. I can write a loop and look regularly to the change date. However to avoid unnecessary CPU processing, I would like to be notified when a file is changed. Can this be done by events in LabVIEW ?
    Thanks in advance for your reaction.
    Best regards,
    Marc

    Marc VH wrote:
    Dear,
    I
    have to do something on a file or folder when this is changed from
    outside the program. I can write a loop and look regularly to the
    change date. However to avoid unnecessary CPU processing, I would like
    to be notified when a file is changed. Can this be done by events in
    LabVIEW ?
    LabVIEW
    has not a build in disk event handler. On Windows I would call the
    Windows API functions FindFirstChangeNotification together with the
    according event handling APIs. Or maybe since LabVIEW does not run on
    9x systems anyhow anymore use ReadDirectoryChangesW instead.
    Enclosed is a simple example using FindFirstChangeNotification. It is
    all enclosed in one VI using an internal shift register. This limits
    the function to be used for on change notification at the same time
    only. In order to make it deal with multiple change notifications one
    would have to change quite a bit of the VI, possibly taking out the
    create, retrigger and close operation into individual VIs passing an
    uInt32 between them for the change notification handle.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions
    Attachments:
    WIN File Change Notification.zip ‏29 KB

  • I lost my ipad a few days ago, is it possible to find it? and how do i go about it. i registered it already.

    I lost my Ipad somedays ago. Is it possible to find a lost Ipad that is being registered?

    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
     Cheers, Tom

Maybe you are looking for