Is it possible to turn off/on wifi on an airport express through an API?

Hi,
I use 2 airport express devices (an old and a new model) in our home. At night, I want to turn the wireless network off. In the morning, off course, I want to turn the wifi back on. For several reasons I want to do this from a linux machine.
Is it possible to do this? Is there an API or telnet access to the airport express devices to get this done?
Kind regards,
Marc    

Welcome,
Nope - best bet is to get an electronic timer.
Regards,
Shawn

Similar Messages

  • Possible to turn off bluetooth & wifi radios from Vista?

    Anyone seen a utilty that will allow you to turn off the wireless and Bluetooth radios from Vista as you can do in Leopard to preserve power?

    Go to start menu, write "Device Manager" at the bottom and select it in the search-results. Once there browse to whatever you want to enable/disable, right-click and select "disable".
    (don't disable graphics or other important stuff.. windows has no protection from stupidity
    On a PC you usually have a physical button on your laptop for switching on/off the Bluetooth or wifi radio, but all that usually does is disable the driver, so the above should work just as well.

  • Can we print with a non-wifi printer via Airport Express?

    Is it possible to print with non-wifi printer via Airport Express?

    Read through this previous thread for answers: https://discussions.apple.com/message/21994667#21994667

  • Is it possible to turn off the updates that make your iphone need to be activated again?

    Is it possible to turn off the updates that make your iphone need to be activated again? Because you need wifi in order to activate and sometimes I don't have wifi so my iphone becomes unusable untill I get wifi again.

    I'm sorry but it says 8.1.2 on my phone when I check for the info about the software.
    The issue I have is that on random moments it asks me to activate my phone ( I think after an update or some kind ) but sometimes I have no access to wifi to activate it so I was wondering if I could make that stop?
    I'm sorry for the strange explanation, english isn't my mothertongue

  • Hi, is it possible to turn off wi-fi of my time capsule?

    Hi, I read an article that wifi electro-magnetic emission may be dangerous for children's health. Therefore I would like to use wired connection and turn off the wireless feature of my time capsule. Please let me know if it is possible and how I can do it.
    Still I would like to use the time capsule as a wired router and backup storage facility for my desctop.
    One additional question - if it is not going to be possible to turn off the wi-fi, is there another alternative to turn off the time capsule reather than disconnecting it from the socket? Is there an alternative power cord with turn on/turn off switch? Any ideas?
    Regards,
    aldo7

    Hi, I read an article that wifi electro-magnetic emission may be dangerous for children's health.
    There will always be a silly article about anything... if you read it.
    I can understand your concern, but Pastenague already pretty much summed up most of what I was going to say. BTW, I would not be surprised if that author is the kind of hypocrite who goes out in the sun all day, or hangs out in cigarette smoke filled rooms.
    Electromagnetic waves are everywhere, man-made and environmental. After well over a decade of testing, it's never been proven ... all these 'scare claims' that tend to hit the media. I still remember what started it all, back when someone was diagnosed with cancer after shortly getting a cell phone, and he heard about someone else who had cancer and also had used a cellphone.
    OMG... Therefore, cellphones MUST cause cancer, and the electromagentic waves are carcinogens!
    They're still trying to prove that.
    There are far more things to worry about health wise, than the EMFs.
    BTW, in regards to that author, I have my own article to submit to them. And I can even back mine up with facts:
    A study has shown that given a long-enough time-line, EVERYONE who drinks water in their life, eventually dies.
    Another study has shown, that 100% of people who currently are diagnosed with cancer, have drank at least 1 cup of water in thier life-time.
    Another alarming fact has been raised recently, that the harmful effects of water is not just restricted to humans. For example, a study of deceased adult cows at various farms, has shown that there was water-content in all their carcasses.
    There is a strong lesson to be learned here. Stay way from water or any product bearing H2O at all costs!

  • Is it possible to turn off a channel in DAQ?

    I am using 4*PXI-6070E to acquire 64 channels simultanously. Is it possible to turn off one or several channels during acquisition? Which function or property node should I use? I have tried using property node "disable" in waveform graph but it seems didn't work. That channel is still running and the data is still here. Can anyone help me plz? THX a lot!

    Once a set of channels are configured in a task and being acquired, you cannot reconfigure the task (add/remove channels) without stopping the running task
    What you could do is to: Use array functions ( like index array) to create a subset of channels you require, from the set of channels being acquired

  • Is it possible to turn off a spot colour

    Hello
    Probably a dumb question but I will ask anyway. Is it possible to turn off a spot colour in CS4. I can effectively do it by creating a spot white and merging the spot colour I want to delete to the spot white using the ink aliasing. However, this leaves a spot colour in the high res pdf at th end of the job. This then causes a problem as we use an online proofing system which then fails the flightcheck as there is a spot colour in the pdf.
    Cheers
    Beeefcake

    The spot colour is used so that we can perform a find on any text with a fill of the spot colour and delete it. The spot colour is put in for this purpose when the original artwork is created in the US.
    Kathlene - I can't believe I didn't spot that! This would work! We could just convert the swatch to 0% cmyk as you suggest. The majority of the pages in the catalogue are on a white background so the pricing would simply disappear resulting in no spot place when pdf's are made. There are some pages on a coloured background but these are very few and the pricing could be deleted manually.
    Thanks for the help!
    Beefcake

  • I updated my LG G3 this week and now it SUCKS!  When I'm connected to WIFI, nothing on Facebook works.  The photos and videos won't populate.  I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now.

    I updated my LG G3 this week and now it SUCKS!  When I'm connected to WIFI, nothing on Facebook works.  The photos and videos won't populate.  I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now.   Before I updated my phone, I really liked it, now I don't like my phone at all!  When will this be fixed? I hope it's soon.  I'm thinking of changing providers now.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT201413 Whenever i try to sync my ipod a message keeps coming up saying "1 or more items could not be synced", apparently its error -69. Please help, i've tried rebooting my laptop, installing the latest itunes and turning off the wifi but nothing seems

    Whenever i try to sync my ipod a message keeps coming up saying "1 or more items could not be synced", apparently its error -69. Please help, i've tried rebooting my laptop, installing the latest itunes and turning off the wifi but nothing seems to work.

    Are you using security software on your PC? If yes, try to disable the software or check the settings. More info here: http://support.apple.com/kb/TS3125

  • Camileo S20 - Is it possible to turn off the screen?

    Is it possible to turn off the screen when using Time Lapse or Motion Detection modes so as to save power?

    Hi buddy,
    I have downloaded the user manual off Camileo S20 and searched a little bit but unfortunately I can find no informations about turning off the screen when using Time Lapse or Motion Detection. It seems that the screen is always on.
    But you can connect the AC adaptor while recording movies. So you have always power. :)

  • Why is it that every time I turn off my wifi on my phone my 3G dosen't work? Help :(

    So every time I turn off my wifi  from my iPhone 5c  at home My 3 G Doesn't Want To Work? And a 1x keeps popping out?

    Could be cause I just got my phone like 2 days ago. Lol and sometimes it has a mind of its own. Like when I'm trying to text it starts to push random letters and it will go home and then go in to my contacts and then a app with out me pressing anything. Like if it was a glitch or something?

  • Is it possible to turn off the Apple dock completely?

    I was wondering if it was possible to turn off the Apple dock completely without causing irreparable damage to my system. I am considering using Drag Thing, but when I am using it the functionality seems redundant with the Apple dock, also using both programs in tandem uses up more precious memory. The Drag Thing website links to the following tutorial as a solution:
    http://www.creativemac.com/2003/02_feb/tutorials/dockdead2030225.htm
    But it was published a long time ago, and I don't want to do anything rash that would damage my system, I mean I don't dislike the Apple dock enough to do that. Thanks in advance for the consideration and suggestions.

    I could only discover an option to hide the dock from within Drag Thing. I am looking to make the dock disappear completely. Drag Thing does not officially support this option, giving this answer in the Q & A section of their website:
    "*It is possible, but I wouldn't recommend it. Since people often ask how to do it anyway, here's a good tutorial I found on how to kill the Dock by Kevin Schmitt. This may have unforseen side effects however, which is why I've not documented the procedure myself, or added an option for this in DragThing. I keep the Dock hidden off the bottom of the screen on my own Mac.*"
    Is the dock so embedded within the Finder's operations that killing it will affect system performance?

  • Is it possible to turn off the passcode?

    I’ve seen a couple postings that say go to Settings --> General --> Passcode Lock, but on my iPhone 4s I don’t see anywhere to turn it off at that point.  In the manual, there is no description of turning off the passcode – at least I didn’t find it.
    Is it possible to turn off the passcode?

    row6 wrote:
    no, once you get to Passcode Lock, there is no option to turn it off - certainly none visible to me.  Have you actually tried to do this?  Do you have an iphone 4s?
    Here is a screen shot of what you get when you press "Passcode Lock".
    You have to ENTER your passcode first, to access the part of the Settings that allows you to disable the passcode lock.
    Enter your passcode.
    Then you can turn the passcode off.

  • Is it possible to turn off the fluid grid function in dreamweaver during the process of building your site by mistake? It was working fine and simply stopped and I don't see how to correct what is wrong.

    Is it possible to turn off the fluid grid function in dreamweaver during the process of building your site by mistake? It was working fine and simply stopped and I don't see how to correct what is wrong.

    There is no specific function that turns FGL on or off.
    When you say that it has stopped, do you mean that the handles no longer show?
    If that is the case, then I think you may have modified the CSS to such an extent that Dreamweaver no longer recognises it as belonging to FGL.
    There are a couple of avenues for you
    Redo the site and make sure not to touch the FGL CSS
    paste the code here so that we can see what has gone wrong.

  • My iPhoto often have difficulty in opening without the "repair". Maybe it's because I have almost 2000 pictures! When I initiate repair using Mac for a long time to find and sort faces .... Is it possible to turn off or avoid this feature?

    My iPhoto often have difficulty in opening without the "repair". Maybe it's because I have almost 2000 pictures! When I initiate repair using Mac for a long time to find and sort faces .... Is it possible to turn off or avoid this feature?

    This user has found a "hack" to turn off faces.  Several users have reported success with the method.  I can't comfirm the method as I've not used it.  Use at your own risk.
    lopezio
    Re: Iphoto 11 -How to turn off faces?
    Dec 30, 2013 9:06 AM (in response to mkmichaelmk)
    Start of solution:
    I did some digging in the prefs of iPhoto and found out the following. This is how you can disable (turn off) Face detection, without deleting faces found so far (just in case you want to restart processing at another time):
    1. Quit iPhoto
    2. Open Terminal Application (Applications/Utilities/Terminal.app)
    3. Type the following (exactly as is):
    defaults write com.apple.iPhoto PKFaceDetectionEnabled 0
    (then return)
    4. - Start iPhoto - Faces stops getting on your nerves...
    If you ever need to re-enable faces, just do the same again and replace the 0 with 1.
    OT

Maybe you are looking for