Is it possible to turn off those annoying balloons?

The pop up balloons are always in the way of what I'm trying to read. Can they be turned off?

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Similar Messages

  • How to turn off those preexisting tables, SPs, etc. in Oracle XE?

    Hi,
    I am new for Oracle XE in SQL Developer?
    How to turn off those preexisting tables, SPs, etc. in Oracle XE based on
    SQL Developer? It is annoying to have so many preexisting tables, SPs, etc there.
    Thanks,

    One solution is to take a screen shot of the photo. That should make it last in line.
    Another solution. Make a new album. Transfer the photos to the new album. Then change the photo order, by tapping select, hold your finger on the photo, move it, tap done.

  • Is it possible to turn off a channel in DAQ?

    I am using 4*PXI-6070E to acquire 64 channels simultanously. Is it possible to turn off one or several channels during acquisition? Which function or property node should I use? I have tried using property node "disable" in waveform graph but it seems didn't work. That channel is still running and the data is still here. Can anyone help me plz? THX a lot!

    Once a set of channels are configured in a task and being acquired, you cannot reconfigure the task (add/remove channels) without stopping the running task
    What you could do is to: Use array functions ( like index array) to create a subset of channels you require, from the set of channels being acquired

  • Is it possible to turn off a spot colour

    Hello
    Probably a dumb question but I will ask anyway. Is it possible to turn off a spot colour in CS4. I can effectively do it by creating a spot white and merging the spot colour I want to delete to the spot white using the ink aliasing. However, this leaves a spot colour in the high res pdf at th end of the job. This then causes a problem as we use an online proofing system which then fails the flightcheck as there is a spot colour in the pdf.
    Cheers
    Beeefcake

    The spot colour is used so that we can perform a find on any text with a fill of the spot colour and delete it. The spot colour is put in for this purpose when the original artwork is created in the US.
    Kathlene - I can't believe I didn't spot that! This would work! We could just convert the swatch to 0% cmyk as you suggest. The majority of the pages in the catalogue are on a white background so the pricing would simply disappear resulting in no spot place when pdf's are made. There are some pages on a coloured background but these are very few and the pricing could be deleted manually.
    Thanks for the help!
    Beefcake

  • Can you turn off the annoying pop-up in iTunes

    Can you turn off the annoying pop-up in iTunes when you hover over a song in your song list. 
    I don't need a stupid pop-up; this isn't a stupid Windows program. Now my iTunes is jumping around, things are popping up!  *** APPLE! I wnat my old iTunes back!

    Like whan you touch the black bar at the top of the screen with the time and the battery percentage and all that...the screen will scroll all the way back to the top.  I'm wondering if there is a way to turn that off

  • Camileo S20 - Is it possible to turn off the screen?

    Is it possible to turn off the screen when using Time Lapse or Motion Detection modes so as to save power?

    Hi buddy,
    I have downloaded the user manual off Camileo S20 and searched a little bit but unfortunately I can find no informations about turning off the screen when using Time Lapse or Motion Detection. It seems that the screen is always on.
    But you can connect the AC adaptor while recording movies. So you have always power. :)

  • Is it possible to turn off the Apple dock completely?

    I was wondering if it was possible to turn off the Apple dock completely without causing irreparable damage to my system. I am considering using Drag Thing, but when I am using it the functionality seems redundant with the Apple dock, also using both programs in tandem uses up more precious memory. The Drag Thing website links to the following tutorial as a solution:
    http://www.creativemac.com/2003/02_feb/tutorials/dockdead2030225.htm
    But it was published a long time ago, and I don't want to do anything rash that would damage my system, I mean I don't dislike the Apple dock enough to do that. Thanks in advance for the consideration and suggestions.

    I could only discover an option to hide the dock from within Drag Thing. I am looking to make the dock disappear completely. Drag Thing does not officially support this option, giving this answer in the Q & A section of their website:
    "*It is possible, but I wouldn't recommend it. Since people often ask how to do it anyway, here's a good tutorial I found on how to kill the Dock by Kevin Schmitt. This may have unforseen side effects however, which is why I've not documented the procedure myself, or added an option for this in DragThing. I keep the Dock hidden off the bottom of the screen on my own Mac.*"
    Is the dock so embedded within the Finder's operations that killing it will affect system performance?

  • Is it possible to turn off the passcode?

    I’ve seen a couple postings that say go to Settings --> General --> Passcode Lock, but on my iPhone 4s I don’t see anywhere to turn it off at that point.  In the manual, there is no description of turning off the passcode – at least I didn’t find it.
    Is it possible to turn off the passcode?

    row6 wrote:
    no, once you get to Passcode Lock, there is no option to turn it off - certainly none visible to me.  Have you actually tried to do this?  Do you have an iphone 4s?
    Here is a screen shot of what you get when you press "Passcode Lock".
    You have to ENTER your passcode first, to access the part of the Settings that allows you to disable the passcode lock.
    Enter your passcode.
    Then you can turn the passcode off.

  • Is it possible to turn off the updates that make your iphone need to be activated again?

    Is it possible to turn off the updates that make your iphone need to be activated again? Because you need wifi in order to activate and sometimes I don't have wifi so my iphone becomes unusable untill I get wifi again.

    I'm sorry but it says 8.1.2 on my phone when I check for the info about the software.
    The issue I have is that on random moments it asks me to activate my phone ( I think after an update or some kind ) but sometimes I have no access to wifi to activate it so I was wondering if I could make that stop?
    I'm sorry for the strange explanation, english isn't my mothertongue

  • Is it possible to turn off the fluid grid function in dreamweaver during the process of building your site by mistake? It was working fine and simply stopped and I don't see how to correct what is wrong.

    Is it possible to turn off the fluid grid function in dreamweaver during the process of building your site by mistake? It was working fine and simply stopped and I don't see how to correct what is wrong.

    There is no specific function that turns FGL on or off.
    When you say that it has stopped, do you mean that the handles no longer show?
    If that is the case, then I think you may have modified the CSS to such an extent that Dreamweaver no longer recognises it as belonging to FGL.
    There are a couple of avenues for you
    Redo the site and make sure not to touch the FGL CSS
    paste the code here so that we can see what has gone wrong.

  • My iPhoto often have difficulty in opening without the "repair". Maybe it's because I have almost 2000 pictures! When I initiate repair using Mac for a long time to find and sort faces .... Is it possible to turn off or avoid this feature?

    My iPhoto often have difficulty in opening without the "repair". Maybe it's because I have almost 2000 pictures! When I initiate repair using Mac for a long time to find and sort faces .... Is it possible to turn off or avoid this feature?

    This user has found a "hack" to turn off faces.  Several users have reported success with the method.  I can't comfirm the method as I've not used it.  Use at your own risk.
    lopezio
    Re: Iphoto 11 -How to turn off faces?
    Dec 30, 2013 9:06 AM (in response to mkmichaelmk)
    Start of solution:
    I did some digging in the prefs of iPhoto and found out the following. This is how you can disable (turn off) Face detection, without deleting faces found so far (just in case you want to restart processing at another time):
    1. Quit iPhoto
    2. Open Terminal Application (Applications/Utilities/Terminal.app)
    3. Type the following (exactly as is):
    defaults write com.apple.iPhoto PKFaceDetectionEnabled 0
    (then return)
    4. - Start iPhoto - Faces stops getting on your nerves...
    If you ever need to re-enable faces, just do the same again and replace the 0 with 1.
    OT

  • Is it possible to turn off selected audio tracks for export?

    Hi,
    I have worked with fcp 5 before on a project with two languages. Beside the footage audio, each language had its own audio track which I could turn off for export. It was nice to have all languages in one project, because changes had effect for all languages at the same time.
    Is it possible to turn off audio tracks in fcpX for export?
    I know that fcpX hasn't tracks anymore, but is there a similar function to serve the same purpose?
    I am not a professional editor.

    I am blissfully unaware of how production companies work .
    The project I am working on is a pretty straight forward instruction video. I will be shooting the video, edit and then have the comments recorded by professionals. In DVDPro I will put them both together.
    The magnetic timeline is kind of irritating. I will have to work on the languages one after the other. So once I have a language done, I will probably create a compound clip to prevent the sliding around. That would also make it easier to enable or disable the clips.

  • Is it possible to turn off iMessage off for one individual during group text?

    Can I turn off iMessage for individuals who use the iPhone and IOS 5 but do not have their iMessage setting on?  I want to group text with two other people.  They both have IOS 5, but one does not use iMessage.  She can't recieve the group text unless I turn my iMessage off for everyone.  Is it possible to turn off iMessage for one individual for a group text?

    Have you set font smoothing in Appearances (System preferences) to match your monitor?

  • How can i turn off the annoying voice that is there whenever you enter a command

    How can I turn off the annoying voice that is there whenever you enter a command.

    Settings > General > Accessibility > VoiceOver > Off

  • Turning off the annoying green rectangle around Java windows

    How does one turn off the annoying flashing green rectangle around Java windows? And how do you stop it from jumping to the top of other windows.
    Both of these functions are quite annoying and seem rather pointless.
    (I am using Firefox)
    Thanks

    Are you referring to some Applet that you have programmed or something you found on the net? Even for the latter case, I don't have either of the problems you mention, so it's probably related to the site or your browser settings.
    Please note that these forums are for support to developers and students of Java, not for every java product ever released.
    db

Maybe you are looking for

  • Error when using FPM_GAF_Component.

    Hi ,       I did FPM application configuration and component configuration.  When I test from Application configuration it works perfectly. But when I run it from SE80 application->test it dumps. Below is the dump. Can some one help me please. The fo

  • How to sync my iCal with my phone

    I am a seriously new iMac owner and I was wondering if I can sync my iCal with my Android phone?  If anyone knows I would really appreciate the help.

  • Moving volumes between servers

    First, I'm new at this, so allow for my ignorance. Second, we are ARCHIVING data on StorEdge L3500s and sometime in the next 10 months intend to upgrade to L7000s. The issue: we have two L3500s on different LANs. ServerA has volumes labeled from AWR1

  • "#NAME?" showing up instead of values...NEED HELP!

    Gurus, I need to write BPC reports to a network folder by the entity so that anyone who is not BPC user  can access it. Is it possible? I have set up a book with the entity being varkey. The reports publish alright but if BPC is not running on users'

  • XSLT: How can I explode a single node value multiple times?

    For a given XML tree like this, <?xml version="1.0"?> <offers>   <fcst start_hr="1" end_hr="10" value="100"/> </offers>how can I get an output like this? (I need to explode the value of 100 from hr=1 to hr=10, ten times.) 100,100,100,100,100,100,100,