Is it possible to unformat an OCFS formatted disk in windows RAC

Hello: I have a drive formatted as ocfs on windows. But, I want it to be unformatted, and given back to the storage for reformatting as ASM. How can this be done?
Thanks

Macologist250,
to use Boot Camp, Windows must be on your MacBook Pro’s internal disk. You could try a virtualizer such as VirtualBox or Parallels Desktop if you’d rather have Windows on an external disk.

Similar Messages

  • Is it possible to maintain multiple payment formats with a single Program

    Hi,
    Is it possible to maintain multiple payment formats with in a single program.
    For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
    When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
    if its possible could you please tel us where to define the parameters in Setups.
    Many thanks,
    Zaheer S

    nazzu wrote:
    Hi,
    Is it possible to maintain multiple payment formats with in a single program.
    For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
    When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
    if its possible could you please tel us where to define the parameters in Setups.
    Many thanks,
    Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

  • Mac Formatted Ipod on Windows XP, Possible?

    Well i have a dilemma, well actaully 2 dilemmas but we'll take one step at a time here. Is there any way to get the songs on my Mac formatted iPod onto my PC, also, can i transfer songs from my PC to my Mac formatted ipod. If so, how? My reason for wanting to do this is that i had my ipod formatted for a Mac on my mac mini, but now the mac mini when i try to power it up hangs at the grey apple screen and does not boot(second dilemma). So id like to backup my songs on my PC at the very least so i dont lose any of my purchased music. So even if i can't transfer songs to my ipod from my PC its ok, so long as i can backup the songs. Thanks for your help.
    -Ryan S.

    From the iPod FAQ:
    Question: Can I use an iPod formatted for Mac on a PC, or an iPod formatted for Windows on a Mac?
    Answer: It is not possible to use an iPod formatted for Mac with Windows. This is because Windows does not support the HFS Plus file system and therefore will not see the drive.

  • Is it possible to setup serial number format only accept 10 digits?

    Hi,
    I am using TestStand 3.0.
    Is it possible to setup serial number format only accept 10 digits?
    Also I want to input part number before start test. How to do this?
    Thanks,
    Ben

    It's the modelsupport2.prj in components\models\TestStandModels\
    There is also a preuutcallback.seq example in the shipping examples.

  • Is it possible to integrate an RTF format editor in an apex page?

    Hi, guys:
    I wonder if it is possible to integrate an RTF format editor in an apex page? so user can edit RTF document in APEX?
    Thanks.
    Sam

    I don't think so. Browsers may be able to show the content of an rtf file (through extensions, like it does with a .doc or .pdf file), but there is no possibility to directly edit the content.
    Even if it were possible, one rtf is not the other. You can save a Microsoft .doc as a .rtf, but it might contain many rtf features that are not supported in another rtf editor.

  • Format iPad with Windows or Mac

    Hi,
    I remember there being issues in the past about formatting an iPod for Mac, and then trying to format it for Windows - is it possible to set an iPad up with a Mac, and then restore it, and set it up with a Windows computer at a later date?
    The fact that I can't find anything online about this would suggest it isn't a problem...
    Many thanks in advance,
    Nick

    An iPad doesn't need formatting and will work with PC and/or Mac (I've connected mine to both without problems). The only issue you might have is moving to a different computer in general (whether or not it's the same type as the current one) as iPads are designed to only be synced with one computer - so you may need to copy all your content to the new computer : http://support.apple.com/kb/HT1202

  • How do I import music from a flash drive that was formatted with a windows PC to my MacBook?

    How do I import music from a flash drive that was formatted with a windows PC to my MacBook - the drive is showing it has over 3GB of info on it but none of the files are showing up in finder?  I had backed up my iTunes library on the flash drive about a year and a half ago before I switched from a dell to a MacBook pro.

    What I found works for me is to make sure iTunes keeps the music files organzied in the iTunes Media folder according to album, artists, etc. and that it copies the music files there when adding them to the library.  That way, if something happens to the library, the raw files can always be re-imported again.

  • Is it possible to print the info. from the help window. (ex. how to create a smart list)

    is it possible to print the info. for the help window. (ex. how to create a smartlist... i tunes)

    Yes, click the gear icon and select print.

  • Windows computer says 'Format disk in drive E' when I plug in iPod. Will this erase everything?

    When I plug my iPod nano into my Windows laptop, it says 'Format disk in drive E'. Will this lose everything if I do this?

    Hello,
    I'd ask in the Windows forum on Microsoft Community.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Windows 7 will only install on an NTFS Formatted disk: boot camp partition not formatted right?

    I recently tried to install windows 7 on my Macbook (early 2008 white). Boot camp made the partition and I even got to the Windows install screen, but the partition made by boot camp could not be used to install windows on, because it was in the wrong format, evidently (Error: windows can only be installed on a NTFS disk, or something like that). I tried to find someway to reformat the partition in disk utility, but I don't see anything that could change the format. Please help! (If there isn't a way to fix this, is there at least a way to delete the partition? It's rather annoying having 100 gbs of your harddrive just siting there, unable to be used)
    And just a side question, does it matter whether you install Windows 64 bit or 32 bit? The printed-out boot camp guide said only the 32-bit version, but it didn't include anything about Windows 7)
    Thank you!
    Computer: Early 2008 White Macbook
    OS X (10.6.7)
    500 GB hard drive
    4 GB DDR2 RAM

    Hi,
    Windows 7 needs its system to be installed on a NTFS formatted partition.
    There 's no way to use FAT32 as file system for this.
    Pages 8 - 10 of the BootCamp Install Guide http://www.apple.com/support/bootcamp/ describe how-to reformat the partition to NTFS during the Windows installation.
    Officially 64-bit Windows 7 is not supported on a 2008 MacBook.
    However, there are instructions to be found on how-to do it nonetheless.
    Regards
    Stefan

  • Is it possible to upgrade the internal Hard disk drive on the iMac

    Is it possible to upgrade the internal Hard disk drive on the iMac?

    Yes but it's definitely not advised. If you have a machine newer than 2009 Apple uses drives that have integrated heat sensors. This makes upgrading much more difficult but not impossible. If you have a machine still under warranty then definitely DO NOT do this yourself as you may void the warranty not to mention it isn't for the faint of heart. Take the machine to an AASP to have the work done, you will need to find one in your area willing to do so.
    If you are considering a new machine then simply buy the configuation you need.

  • Mac formatted iPOD to windows

    My ipod is formatted for my powerbook itunes the trouble is i have itunes also on a pc that has a different music library and iwant to be able to add the pc library to my ipod without having to re-format it to windows and loose all my data.I do not have access to my mac so iwill not be able to back my data up to the mac. Thanks

    If your iPod is formatted for Mac it won't run natively on a PC because Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). There are third party programs that will allow you to use a Mac formatted iPod on Windows. XPlay for instance gets good reviews and has the added functionality to let you copy your songs back to iTunes. Once you have your songs saved to the PC you can go ahead and restore the iPod for Windows. You can purchase XPlay at this link: XPlay 3

  • Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

    Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

    Well then maybe you could take a screenshot because the appearance of such a window is news to me.
    Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
    To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
    If you can't find it on your Desktop look in your Documents or Downloads folder.
    When you post your response, click the "camera" icon above the text field:
    This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
    ⌘ Shift 4 and then pressing the space bar captures the frontmost window.
    ⌘ Shift 3 captures the entire screen.
    Drag the screenshot to the Trash after you post your reply.

  • Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.  If possible, Kindly provide me the website link.

    Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
    If possible, Kindly provide me the website link.

    Pl do not post duplicates
    Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
    I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
    Continue the discussions in your original threads

  • HT201376 Hello, I am trying to reset my macbook pro to its factory settings but I can't type the name of the formatted disk nor can I click on erase, as this feature is disabled. Could you please assist?

    Hello, I am trying to reset my macbook pro to its factory settings but I can't type the name of the formatted disk nor can I click on erase, as this feature is disabled. The 'type name' space and the 'erase' button are in light grey - Could you please assist?

    Hello!
    Did you boot to the Internet Recovery Partition?
    Here’s how:
    1/ Make sure your computer is completely shut down.
    2/ You’ll have to be quick next: Press the Mac’s power button. As soon as you either hear the loud chime, or see the display light up - usually after a second or 2 - on your keyboard press [alt] + [cmd] + [r] Keep these keys on your keyboard pressed until you see a spinning globe with the text “starting Internet Recovery” You might have to connect to your Wi-Fi network before you can continue here.
    After a few minutes, you’ll be presented with a Utilities screen. This is the Internet Recovery partition. If this step is already giving you problems, try using a USB-keyboard. It doesn’t have to be an Apple-keyboard. If you have a Windows-tailored keyboard laying around, use the “Windows-flag” key in stead of the [cmd]-key and it should also work.
    3/ Choose Disk Utility and click [continue]

Maybe you are looking for

  • Process order %00000000001 has been selected for deletion

    Hi Guys, With the use of strategy type 86 (assem bly processing for process order) when creating the sales order it is giving the error Process order %00000000001 has been selected for deletion Message no. V1796 According to process order will be cre

  • Loading PDF and Video Files in BLOB Column

    Hi, Below is my database version Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production The Requirment is In a web page ( developed using Java Spring ) end user has the funtionality to upload a pdf/video file by browse the requi

  • Credit Limit Check

    Dear Gurus Can a single Customer has 2 different Credit Limit Checks i.e. 1) Region-wise and 2)Product-wise Plz respond to [email protected]

  • Change the folder icon "properly"! not by "Get Info." window.

    Hello everyone, I was wondering what is the way of changing the folder's icon "properly"? I don't mean the copy/paste of the icon in the "Get Info." window. Because whan I do that, the icon changes but the problem is when I press the Space Bar for "Q

  • Obiee 11g Global Consistency Check Error

    Hello all, I need guidance regarding an error which pops up after the consistency check. However Admin tool lets the rpd to be saved and uploaded to the server, inspite of this error. The error is as follows: "the initialization string in the reposit