Is it possible to "uninstall" the Technical Preview?

Simple as that, is it possible to uninstall the technical preview and go back to the previous setting?

As per the FAQ
Is there a problem you are needing help with?  
http://windows.microsoft.com/en-us/windows/preview-faq#faq=tab0
If you want to go back to your previous operating system
You'll need to reinstall your version of Windows from the recovery or installation media that came with your PC (typically DVD media). If you don't have recovery media:
For Windows 7 or Windows Vista: Before you update, you might be able to create recovery media from a recovery partition on your PC using software provided by your PC manufacturer. Check the support section of your PC manufacturer's
website for more info.
For Windows 8.1 or Windows 8: You might be able to create a USB recovery drive. For more info, seehttp://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive
Thanks, John Marlin Microsoft Server Beta Team

Similar Messages

  • Is It  POSSIBLE to change the Technical Name of Z-version Query

    Hi  Friends ,
    I was changed all quereis and cube from standard version to Z version.
    For queries, by using rszc , i was changed to Zversion,Now again is it
    possible to change the Technical Name of Zversion Query ?
    If possible , can you please tell me the process ?

    Hi Hameed,
    This may be the reason you are getting an error.
    The target InfoCube, the InfoCube for the query copies, must contain all the InfoObjects of the source InfoCube (InfoCube of the original queries).
    The another reasons may be the copying of queries within the same cube shouldn't be done by RSZC.
    It's better to approach the Bex Query designer.
    Hope you understood..
    Check the link below for more information:
    Re: How to copy query elements without Bex
    http://www.bi-expertonline.com/article.cfm?session=&id=2055
    Re: copy queries + variants + workbooks -- RSZC ?
    Regards,
    Ravi Kanth
    Edited by: Ravi kanth on Jun 10, 2009 10:03 AM

  • Am I the only person that the Technical Preview doesn't work at all for?

    I installed Windows 10 Technical Preview on my Surface Pro 3 and it was a complete joke. I could not use the machine at all?

    On Mon, 26 Jan 2015 08:07:49 +0000, rprjr_optonline.net wrote:
    I installed Windows 10 Technical Preview on my Surface Pro 3 and it was a complete joke. I could not use the machine at all?
    Which build? Which SP3 model? What specific problems?
    I have 9926 running on an SP3 i5 and have had zero problems. I know of lots
    of other SP3 owners who are also having no problems with 9926.
    Paul Adare - FIM CM MVP
    If I had it all to do over again, I'd spell creat with an "e". - Kernighan

  • Problems uninstalling the W10 Preview to W7

    I have tried the upgrade from W7 to W10, finding enough problems to make the roll back, but after returning to W7 I have foundthat the windows update is continuously trying to re-install the W10 Preview, so surely there is a problem with the version of the
    windows update software in my machine.
    Could you be so kind how can I get and re-install the previous version (before making the upgrade to W10) of th windows update soft?.
    In addition, all my previous W7 system restore points have been deleted. Is there any way to recover them?
    Thanks a lot and regards
    Carlos

    Hi,
    According to your description, I doubt there is no way to revert your system to Former Windows 7 but a reinstallation. But a workaround method is you can adapt to hid the Windows 10 update in Windows Update, then it won't check and install Windows 10 again.
    Roger Lu
    TechNet Community Support

  • Is it possible to uninstall the latest kitkat update ("improvement")?  If not, how can I fix the problems it has created?

    The latest kit kat "improvements" have made using my phone much more frustrating.  How can one roll back this operating system update to the previous version?  If it is not possible to roll it back, how do I fix the following issues?
    1) The battery timing has been greatly diminished.
    2) Gmail isn't syncing properly.   At least 7 times since the update, upon opening gmail, I see lists of messages that are sometimes over a year old, and not my current ones. 
    3)  The sound slider bar on the open screen has disappeared.  It now takes 4 steps in order to get into settings, and temporarily turn off the sound.  That is ridiculous when entering a meeting.  Not to mention that you have to repeat those steps upon the meeting's end.
    4)  Searching for a particular contact in people has become more complicated--much easier to select "m" when looking for Mary's info than to have to scroll through the very JITTERY and  way too touch sensitive sidebar all the way to the "M's" to even begin to search through the M's.  This is way too unwieldy.
    5) Emoticon symbol has replaced the symbol to move to the next line in text messaging keyboard.   I am not interested in childlike emoticons.  I am interested in writing a coherent professional message with appropriate spacing.
    Any suggestions will be greatly appreciated.

    You cannot uninstall Kit Kat from your phone. BTW what kind of phone do you have??

  • [CS 4] Is it possible to change the font preview word? (eg: default is 'sample')

    Hello Adobe Community,
    I know that with past versions, changing the word that was used to preview fonts ('sample') was not possible (in 2006 anyway). But, because I believe CS4 came out in 08, I was wondering if this was a feature that had been implemented since then for CS4.
    If it wasn't done for CS4, is it currently availible for CC? It would be a great feature to have! I know you can change the preview size (which helps a lot) but changing the word would be awesome if you're doing a 'try out' for how a specific phrase looks and want to glance at the preview list instead of going through each font with the arrow keys to change it.
    Thanks all!
       -Michelle

    One trick that has worked for me is to open a new file. Then using the Type Tool, I would type out a phrase or paragraph.
    Do not commit the type, instead use Ctrl or Cmd a to select the entire typed phrase.  Then Ctrl/Cmd h to hide the highlight
    without deselecting.
    From there, you can try different fonts, font color, styles and sizes and see a live preview of what it looks like and make notes so as to narrow down your choices.
    You can also use this trick on an actual project, such as a poster or flyer.
    I hope that answers it for you and if it works as expected,no need to upgrade unless there are other reasons.
    Gene

  • Is it possible to Uninstall the latest ipod update?

    I, like others on this board, made the mistake of trusting Apple to produce software that does no harm. Windows XP has a facility where you can go back to a restore point. Does anyone know of a Unix command that will do something similar? I was using my ipod as a hard drive and was booting from it. I was running 10.2.8. Recently, my primary user account became unusable, but I had another admin account that I was able to boot from. Since I used the ipod updater, my ipod (has 4 buttons) will not mount. I have tried it with 2 different G4 imacs and an old ibook(G3). System profiler sees it as a firewire device, but Disk Utility cannot see it. I did recently back it up, but I think everyone would really appreciate it, if Apple issued a bug fix. Go to the Apple store, and they will tell you to just buy a new one......
    ipod Mac OS X (10.2.x)

    I fixed my ipod by hitting it. Not hard, but hard enough to move the platters. You do not have resort to reformatting, opening the case and shaking it, or sending it in for repair. Just hit it. If it's not working and out of warranty, you have nothing to lose....

  • Is it possible to disable the "auto preview" for pdf's on my ipad email?

    I have iannotate pdf and sign my pad but when I recieve a 1pg pdf it is open on the email and I can't modify or add to the pdf from one of my other programs.

    Matt - just tap and hold on the PDF (even though it rendered in the mail) and you will get the Open In option.

  • Officejet Pro K550 in Windows Technical Preview

    The most recent update to Windows Technical Preview Build 9879 keeps stopping the print spooler when the Officejet Pro K550 is attached. It worked fine in the previous builds. Any ideas? I need to keep the USB cable disconnected until I want to print and then uninstall the printer each time or keep restarting the print spooler each time I want to print anything.
    Thanks

    Hi,
    Try running Windows Update and check if any driver update is available, any drivers for the Technical Preview are only available from Microsoft Update servers.
    If the issue persists, you will need to wait till an update will become available by microsoft, as a beta OS you are likley to experience this kind of issues, devices hasn't have been tested much, as well as the entire operating system.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Microsoft Office Developer Tools for Visual Studio 2013 on Windows 10 Technical Preview

    Hi, I've never developed a plugin for Office before. I've downloaded the technical preview of Windows 10 and have it running via Boot Camp on my MacBook (Looks good! I'll buy it when it comes out). Obviously with this being in beta it's understandable that
    there are problems, so this is just a heads up on one particular problem. Maybe there's already a solution or workaround?
    I've downloaded Visual Studio 2013 Community Edition, brought a copy of Microsoft Office Home And Student 2013 and am currently in the process of installing Microsoft Office Developer Tools for Visual Studio 2013.
    The only problem though is that when I try to install it I get the following message:
    http://s22.postimg.org/dxh1gtra9/Install_Problem_Office_Plugin_Tools.png
    Here is the log:
    http://pastebin.com/7wWkSfjF
    I also tried to download the file directly and run that.
    http://s3.postimg.org/tj9vb660j/Install_Problem_Office_Plugin_Tools2.png
    I right clicked on the file and noticed an options called "Troubleshoot Compatibility". There was a wizard, and I ran through the wizard a number of times through different routes but none of them worked. I was unable to find the option which turned
    off compatibility mode. I then searched for answers online which told me to do some things in the regedit program but that didn't seem to solve the problem.
    Anyway, I understand that this is a beta version of Windows 10 and that there are going to be problems but thought it would be best to let you know. Perhaps I should just bite the bullet and buy Windows 8.
    Many thanks,
    Lawrence

    Hi RealByReel,
    Thanks for sharing the solution back.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Windows phone emulator not working with windows 10 technical preview 9926

    I recently updated my computer to technical preview 9926 and now when I launch the windows phone emulator in 2013 visual studio for windows. It says "Starting windows phone OS" for like 10 minutes. Then it gives me an error message:
    windows phone emulator is unable to connect to the windows phone operating system: The phone did not respond to the connect request. Some functionality might be disabled. And then it will boot up for a little and the home search and back
    button wont work and it will never deploy my app then it will crash and bring me back to visual studio. My hyper v is turned on I have checked all the network switches. The emulator used to work with the technical preview but ever since the newest update
    it stopped working. 
    Any help would be appreciated.
     

    Hi mavese,
    >>I recently updated my computer to technical preview 9926 and now when I launch the windows phone emulator in 2013 visual studio for windows
    Currently, Windows 10 is still in the Technical Preview stage, it is not official supported in this forum, and I would suggest you sending feedback using build-in way, please refer to this link:
    http://windows.microsoft.com/en-us/windows/preview-how-to#how-to=tab7
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Changing the technical names of an ODS and queries

    Can I change the technical name of an ODS and the queries that are built on it? If so how? Thanks

    Hi Niten,
    As said by others it is not possible to change the technical name of any BW Object as there are too many complexities involved. However a possible option is create another ODS/cube and queries as the copy of the existing one and then transfer all the data.
    Refer this post:
    Re: Change infocube name
    Bye
    Dinesh

  • Windows Media Center Capability in Technical Preview

    I have read the threads about using windows 8 keys to add media center to the Windows Technical Preview.  I would like to request that we be given the capability to add media center to the technical preview.
    If this has already been answered, can someone point me in the correct direction?

    I have read the threads about using windows 8 keys to add media center to the Windows Technical Preview.  I would like to request that we be given the capability to add media center to the technical preview.
    If this has already been answered, can someone point me in the correct direction?
    WMC is not supported in Windows 10 TP & is not to be installed on it.
    Cheers,
    Drew
    Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com

  • Is it possible to change InfoCube technical name/rename it?

    Is it possible to change InfoCube technical name/rename it?
    Thank you,
    AG

    I think no possibility to rename the technical name since it's such a 'key field'.
    if not in production yet and no data and the 'afterward' not too much (reporting related,multiprovider), you may consider to copy the cube to the name you want, then copy update rules (this can be easy done), and copy queries.
    Hope it helps.
    Regards

  • Unable to uninstall the CC versions on my PC

    I installed the latest CC (2014) versions of Adobe apps both on my Mac and my PC. To my surprise, I found that the CC versions are still in my C drive, taking up lots of valuable disk space.
    Worse, I cannot uninstall them! The CC versions do not show up in the "Control Panel > Uninstall a program" lists.
    Running Windows 7 Pro 64 bits on my PC.
    This issue did not occur on Mac OS.
    Panos

    Dear Rajshree,
    This information has already been provided in my post.
    It is not possible to uninstall the CC items simply because they don't show up in the "Uninstall a program" lists.
    Let me give you an example about Photoshop. The same applies to all CC apps.
    I have now installed in my system:
    Adobe Photoshop CC 2014 (1.27 Gigabytes)
    But there are also the 32-bit and 64-bit versions of Ps CC:
    C:\Program Files (x86)\Adobe\Adobe Photoshop CC (974 Megabytes)
    C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit) (1.01 Gigabytes)
    Again: It is impossible to uninstall the above two versions.
    You need to provide an uninstaller for all CC apps!
    Panos

Maybe you are looking for