Is it possible to update my ipod 4g is to 6.1.3 if i have 4.3.5 because i keep getting the message error
Is it possible to update my ipod touch 4g ios to 6.1.3 if i have 4.3.5
it is
- plug it to itunes and click the name of device, make sure you back up first and then click restore ipod
if it doesnt work, try turning it off, pressing home button and plugging it inside computer with itunes while you are doing so, this will make device go into recovery mode and then press "restore ipod"
good luck
Similar Messages
-
Itunes updates now it says MSVCR80.dll was not found? I have tried to reinstall itunes and keep getting this message?
Hello emeraldhopes,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
I have been without mu IPhone 4 since yesterday now as I tried to do the IOS6 update and since then it has messed up my phone and I am unable to access any of it's functions as it is locked on the update screen.
My phone was bought through Vodfone and have been on their network ever since, never had any problems like this.
It prompts me to connect to ITunes and when I do it will not go any further as stating 'No sim card is inserted in the IPhone you are trying to activate'. Well there is a sim in there and I have removed it and reinserted it on many occasions today. I am also not trying to activate my phone as all I did was try to the update which I was prompted to do in my setting!
I have seen many people on the net today with the same or similar problems but as yet I am to find a solution!
Help, please as it is driving me crazy!!!Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
Is it possible to run BBC iPlayer from an iPhone4 through AirPlay to Apple TV2 please? I keep getting the message "An error occured loading this content. Please try again later"
First, try a system reset on the iPod. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, reset the Apple TV. I'm not at mine right now and I'm talking from memory but the reset is somewhere in the Settings menu. -
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I keep getting the message You need a newer version of Pages to open this document. but I don't have an update available in app world. I did the update but it doesn't seem to be registering on my macbook pro. Now I can't open any of my documents as I keep getting this message. Now what???
You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter -
When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message. It is more convenient for me to play videos in Quicktime since iTunes is such a memory hog. Please help.
You may get better results if you switch to this alternate version: iTunes for Windows (64-bit - for older video cards) and, if needed, reinstall QuickTime. The new (nearly) all 64-bit version doesn't seem to play well with QuickTime. Perhaps if DRM authentication is required QuickTime needs to be able to see something that is part of the older 32-bit code.
tt2 -
Hi, I have been trying to down load some music to my Ipod. I keep getting the message: (Song name) was not copied to IPod IPod because it cannot be played on this I pod.
Can anybody help? I have never had this problem before.brackenfromrincon wrote:
Is it something about "I Shot the Sheriff" that my iPod has a moral disagreement with? It had no issue importing and installing Body Count's "Kop Killa"...
Not really likely, is it?
First of all, look on the iPod to see if the song is actually on there. (The last Sync of my Classic resulted in "song not copied... because it cannot be found." The song had previously been on the iPod. I checked and despite the fact that iTunes could not find the file, the song was still on my iPod. I checked the folder and the song was exactly where t was supposed to be. So I simply set iTunes to find it again. What happened? I don't know, iTunes simply threw a wobbly!)
Second, try another Sync. Does this change anything? If the song was on the iPod, does a second Sync remove the message? If the song was not on the iPod after the first Sync, does the second one put it on there?
What happens? -
I keep getting the message" There ais a problem with this windows Installer Package. A program required for this install to complete could not be run. Contact your support personnal or package vendor". I get this whentrying to update itunes.
Does anyone have a idea how to fix this/
ThanksTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
I just updated my software for Apple TV; I keep getting the message that my password is incorrect, I know the code is correct and I have tried it multiple times. Apple TV worked fine before the upgrade. Any suggestions?
Then contact iTunes:
Apple - Support - iTunes - Contact Us -
I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update." I have it set as adminstrator as the user. I am running Windows 7 Ultimate. Help please?
Thanks, but I've done that several times & it still says I need administraive privileges. I had itunes installed with no problems until I did the latest update. After that it just disappeared, so I tried reinstalling. Now I can't sync my phone. This is so frustrating!
-
I tried to update itunes but keep getting the message download corupted
I tried to update itunes but keep getting the message download corupted. Try later to download the update. I have tried 5 times. I looked for the corupted download to delete but could not find it. What is the best way to proceed?
I'd try updating using a .dmg installer downloaded from the Apple Website:
http://www.apple.com/itunes/download/ -
When I try to access "Software Update", I keep getting the message, "Unable to Check for Update." I am also unable to connect to the App Store. Anyone have a solution, please?
The Original iPad can only be updated to IOS 5.1.1
-
When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)" I have tried many many times and keep getting the same message. How do I resolve?
First take the steps recommended in this support article. If there's no change, continue as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Cookies/com.apple.appstore.cookies
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Maybe you are looking for
-
Firefox is not recognizing that I have logged into a web page with user name and password. It is stuck on the log in page. Where do I change the Firefox settings so it recognizes the log in and password and lets me into the site? I have had this user
-
Variable One to One - difficult question
Hi I am using a Variable One to One mapping but TL is not using the class indicator information to produce the correct SQL and I wonder what I am doing wrong. I have the following simplified database design: Users: userId (pk) Applications: applicati
-
I have changed just one page of my iweb site and select update only changed pages. It seems that the update refreshes all pages and that takes too long. Am I missing something?
-
Fn:SUM in Xquery getting error
Hi All Gm, I am using fn:sum in xquery.I am getting multiple data as request. Using fn;Sum if I add more 7 digits ,it is converting to hexadecimal.but I don't want to convert hexadecimal value. ex: fn:sum(9999999,0,100)= 9896E3.(sum of 8 digits conv
-
Distribution Monitor import steps!
Hi , Below are the doubts what I have for Distmon. 1. DBSIZE.xml file is created in distmon dir where the preperation was run. Should we copy the same to install the target system to be issued in sapinst. 2. One of the package sapappl1 has becom