Is it possible to Update Remote Key

Hi,
I have a remote system which create remote key while syndicating to ERP...
ERP will create the material number which inturn needs to be updated in MDM using import manager..
While importing I am mapping Material number to remote key.. which is creating new remote key along with defualy remote key generated while
syndication... Is it possible to have one key as it is of same material from  same system? And at the same time it is again syndicating after
I import with material number (Remote Key)..
Thanks
Rajeev

HI Ravi,
by doing so I am having the dublicates in the Data Manager...
Steps I peffromed :
I have a main table of fields FName(DF),LName,City ....I created a remote Sytem (Remote1) with range of 1000 to 2000 .. Imported two records say ((A,AA,City1)(B,BB,CITY2)) using FName as matching filed (I didnt mapped remote key).. MSS is started so I see the keymapping as A,Remote1 and 1000 and B,Remote1 and 1001 for these two records..
NNow I created a dummy remote system and added a new field to the main table MatNumber.... I importing the file with (A,AA,City,Mat1) and remote system as dummy where I am mapping MatNumber to Remote Key... By doing so I see three records with one record dublicating as It got imported from new remote system with key value Mat1..
Can you please guide how to havve only two records by just updating the key value....
Thanks
Rajeev
Edited by: rajeev raj on Jun 22, 2010 10:53 AM

Similar Messages

  • Remote Key Mapping - Maintanance

    Hi All,
    I have Auto Id field in my repository; I would like to maintain this as my remote key value in my key mapping table ( automatically) in the following scenarios:
    1. Initial Loading
    2. On going ( from portal)
    3. Manual creating a record
    The issue is, since its auto id - not available until unless it get created?
    Do I need to syndicate all and loop back as Import and update remote key??? or any webservices and so?
    thanks,
    Alexander.

    Hi Raja
    You are correct on the approach. This can be done by automatic syndication of the newly created records from any of the channels( excel import, Portal, MDM GUI) to Outbound ready folder from where the files are copied to Inbound folder and automatically imported back in MDM. Steps to be followed can be-
    Create ports for syndication and auto Import
    The syndication map should contain mapping for Auto ID and any other unique field for reference. Assign this to Outbound port above.
    The map used for importing should contain mapping of Auto ID to remote key for the record.Assign this to Inbound port above.
    Define/set up a batch job for copying the files from Outbound Ready folder to Inbound Ready folders.
    hope this helps.
    Ravi

  • Maintaining Remote key in look up tables for Production data

    Hi,
    me
    SEE in DEV and QA to maintain the Remote key for Look up tables.First i have exported those look up table values and again imported with mapping Remote keys (clone the field and map it to Remote key.). By this i have maintained the Remote keys to all look up tables. Now for Production what should i do. Is it the same process extract all records from production into our desktop and then again import it using IM, clone the field and map it to Remote key.
    1. Is this the right process?
    2. What happens if there are huge data present in production how to proceed furthr then?
    Required your suggestion please.
    Thanks,
    Pradeep

    HI Pradeep,
    I dont see any problem with this method if I am getting it right
    You are updating remote keys by reimporting lookup data, and this way you have multiple remote keys for data in lookup table,right?
    This will help you to automap entries in Import process for different Remote systems.
    I did not get your 2nd point?
    Thanks,
    Ravi

  • Number Generation & Remote Key Updation

    Hi Experts,
    We have a scenario of integrating MDM with SAP and 3 Non SAP systems
    All the systems have the same number range for the account types
    Whenever there is a request , a copy should always go to SAP plus the requested system
    Doubt:
    The request comes to the import server and the requirement is to automate it
    Now the question is how to generate the number in main table and it should update the key mapping of 2 remote systems automatically
    Kindly help
    Regards,
    Antony

    Hi Antony,
    As you have 4 remote systems, one SAP and 3 non-sap systems, you need to create 4 remote systems in MDM Console ( as shown in page 3/10, 1.2 Create/modify the remote system u201CSAP R/3u201D and specify type as u201Cinbound/Outboundu201D and key generation as u201CQualified Rangeu201D in below article).
    While syndicating you have to select remote system one by one as it is shown here for SAP R/3 (on page 5/10, 2.5 Specify the type as u201CFlatu201D and remote system same as created in step 1.2 : u201CSAP R/3u201D ), you need to do it for all the 4 remote systems one by one. you need to be carefully map remote key for all of these remote systems as shown in section, 4.2 The u201CSAP Material Numberu201D field, which is to be generated during syndication, is to be mapped to the remote key field u201CValueu201D.
    For complete understanding, Please refer the below Article.
    [Using qualified ranges to generate SAP numbers|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/807ce1ba-94c0-2a10-a398-afdfd8135ebd?quicklink=index&overridelayout=true]
    Regards,
    Mandeep Saini

  • Automatic remote key updation in data manager after a data import.

    Hi experts,
    I'm using SAP MDM 7.1 SP10 and after I do a data load via import manager my remote keys of lookup tables are updated. For example, lets just say I do a vendor mass load for some operating company for which I didn't maintain remote key for lookup table "Country" (figure Before load) and after the load its autometically updated in data mager (figure After load).
    Before load.
    After load.
    I want to understand if its noramal SAP behaviour or not. If yes, how can i avoid this.
    Thanks and regards
    Shamit Prakash

    Hello Ravi, I just want to leverage Shamit question :
    I noticed the same behavior after the key mapping enable and the problem is : every time I import a file via Import manager now, when I check my mapping, sometimes a supplier that does not exist in my file is mapped with a different one from MDM. Previously the key mapping property was enabled, if this situation occurs  in my import, as the supplier is a key in my map, this field would not be mapped and I had to correct my file or include this supplier in the database. Now, this became dangerous, as my import can map wrong information. Do i have another option to syndicate only changed records, without enable the key mapping ??? Example : use the selection Criteria in syndicator.

  • Is it possible to update QT 7 to higher version? I ran the update once and all the Pro features were disabled with the message: Your Reg Key is for QT Version 7 only, I had to reinstal Win after updating, because the new  QT  kept the reg with no pro func

    Is it possible to update QT 7 to higher version? I ran the update once and all the Pro features were disabled with the message: Your Reg Key is for QT Version 7 only. I uninstalled the new QT version, and reinstalled the old QT 7 but the Pro functions were still unavailable, so , I had to reinstal Windows to get my Pro functions back. This happened quite a while ago, but every time I get the "Update" message, I am afraid to launch it.

    All I can say is that the problem you experienced is not by design but was instead some sort of technical fault, either in QuickTime or in Windows. I've upgraded QuickTime for Windows a number of times, to various new versions of QuickTime 7, and it's never removed my Pro key. My guess, and this is strictly a guess, is that something corrupted the preference file where the Pro key is held, disabling the Pro features and not allowing you to re-enter your key. Since you reinstalled Windows, I would expect that future updates to QuickTime will go without problem, and if for some reason the Pro features are ever removed, re-entering your Pro key should get them back.
    Regards.

  • Is it possible to install oracle downlaoded from otn and update license key

    Hi Experts,
    I have to install oracle 10gR2 10.2.0.1.
    Customer will provide me the licsense keys but they could not arrange me media/dvd.
    Is it ok to download 10gR2 from url
    http://www.oracle.com/technetwork/database/10201winsoft-095341.html
    and update licsences keys later.
    I need to do installation immediately.
    Please suggest.
    from where to get script to feed license keys
    Thanks & regards

    user12052163 wrote:
    Hi Sir,
    How to update the v$license?http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams093.htm
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#sthref418
    http://download.oracle.com/docs/cd/B19306_01/em.102/b25986/oracle_database.htm#sthref681
    v$license is a dynamic view, you don't update it directly.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_1144.htm#REFRN30116
    >
    if we have puchased 10.2.0.1 from oracle then do we not require the oracle media/dvd from oracle?No.
    >
    Can we simple download it from otn and use it?Yes.
    >
    how to unlock locked features in otn forum account download?What?
    >
    >
    or better way to get dvd from oracle itself.I think you can create a service request to do this, but it has been so long since I've done it I don't know if this is still true. Oracle assumes you can connect to the internet, a not unreasonable assumption these days, even if it means downloading to another computer then moving the zips around. Oracle also assumes you want to send all sorts of information over the internet to them from the database, an unreasonable assumption in my view.
    >
    >
    Thanks for your time and support and helpNo problem, just please read and understand what people tell you. You must learn to search the documentation and how to work with support.

  • Updating registry key 'HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/KEY_OraDb11g_home

    We are installing 11gR2 32 bit on Window XP Professional . During the installation its stucked on given below operation (setup files operation ). I have tried multiple time , but every time it is stucking on same point (setup files operation -- updating registry key 'HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/KEY_OraDb11g_home1') . Not able to install 11gR2 on Window XP.

    This appears to be a download or extraction corruption.
    -Ensure the download size of the files are correct.
    -Don't use Windows native extraction to unzip the files, use something like winzip or 7-zip.
    -Ensure that the installation files are stored locally in a directory without spaces, such as c:\temp
    -Both zip files need to be extracted into the same directory. If you end up with more that one folder (ie: database), then you did the extraction improperly.
    -Do not install into c:\Program Files, install into a directory without spaces such as c:\oracle.
    Possible permissions issue:
    -Ensure you are an administrator on the system.
    -Ensure that the Workstation or Server services are running.
    -Turn-off system/virus protection
    -Do the installation from the console, not remote desktop.
    -Ensure failed installations are properly removed/cleaned.
    - run from the command prompt the deinstall utility (Oracle De-install Utility (11.2.0.1.0) for Microsoft Windows (32-bit))
    answered by:-user9954668
    source:-http://cn.forums.oracle.com/forums/thread.jspa?threadID=1119504

  • Remote System and Remote Key Mapping at a glance

    Hi,
    I want to discuss the concept of Remote System and Remote Key Mapping.
    Remote System is a logical system which is defined in MDM Console for a MDM Repository.
    We can define key mapping enabled at each table level.
    The key mapping is used to distinguish records at Data Manager after running the Data Import.
    Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
    Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
    Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
    If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
    Now, I have to look at Data Syndication and Remote key.
    I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
    Regards
    Kaushik Banerjee

    You are right Kaushik,
    I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
    Yes, but if they are duplicate, they needs to be merged.
    But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
    This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
    Pls refer to these links for better understanding.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
    Hope this helps,
    + An

  • Search for [Remote Key] and [Remote System] in Data Manager

    Hello all
    I would like to be able to search on the remote key and the remote system in the MDM Data Manager is that not possible? I thought I remembered seeing that possibility under the Free-Form Search but now I can't find it.
    I have, however, found this in the Data Manager reference guide:
    REMOTE SYSTEM AND REMOTE KEY FIELDS
    MDM uses the remote systems defined in the Remote Systems table
    within the MDM Console to store and maintain key mapping information
    for each record or text attribute. It does this using a virtual “key
    mapping” field that you never see in the MDM Client.
    This virtual key mapping field is very much like a qualified lookup field
    into a virtual key mapping qualified lookup table.
    Key Mapping information stored in virtual lookup field
    The Remote System and Remote Key fields are normally not visible;
    however, they do appear in several places in the MDM Client.
    Specifically, both fields: (1) appear in the File > Export dialogs in Record
    mode for exporting value pairs; (2) are recognized by the File > Import
    dialog in Record mode for importing value pairs; and (3) appear in the
    Edit Key Mappings dialogs in both Record mode and Taxonomy mode,
    for viewing and editing value pairs.
    Is there any way to search on the value in the remote key from the Data Manager?

    Not sure search i think not possible.
    But you can see keys as mentioned:
    Enable Key mapping in Console.
    MDM Client maens MDM Data Manager.
    They do appear in several places in the MDM Client or Data Manager. Three different methods to see in DM are given already below:
    Specifically, both fields: (1) appear in the File > Export dialogs in Record mode for exporting value pairs; (2) are recognized by the File > Import dialog in Record mode for importing value pairs; and (3) appear in the Edit Key Mappings dialogs in both Record mode and Taxonomy mode, for viewing and editing value pairs.
    BR,
    Alok

  • Remote key mapping in Category table

    Hi,
    We are not able to populate the Remote key in the Category table.
    In standard repository the Category table only has one field 'Category Name' which is defined as Display Field.
    In order for us to map customer file records which has UNSPSC code with our Category definitions we have added a field 'UNSPSC ID' in the Category table.
    As 'Category Name' is the field that should be displayed we need to use the Remote Key function in order to get a unique identifier in the Category table for automatic mapping of supplier records to the Categories in the Category table. However, we are not able to populate the Remote key field in the destination table Categories.
    The Category table has 'Key mapping' set to yes and in the Import manager we clone the field 'UNSPSC ID' and map the clone to destination field 'Remote Key'. However, 'Remote Key' does not come up as unique Matching field and performing the Import we can see that the Remote key is blank for all records in the category table.
    Does anyone out there know what needs to be done in order to populate the 'Remote Key' in the Category table?
    Please note that we are able to map and populate the Remote key field in other tables such as Product Group, Supplier etc but not in the Category table. Is there some special considerations as this is a taxonomy table?
    Regards
    Jan

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Key mapping/ remote key

    Hi All,
    I  have some understanding of key mapping internal functionality.
    my question is ... should I use this key mapping feature from all look up tables, main table while importing from remote systems?
    should all my feilds have REMOTE KEY enabled.
    Lets say I have loaded data into my repository from 3 different remote systems(R1,R2,R3) using remote key feature.
    Now, I want to see all the records that belong to R1 only or R2 only?
    Can this be seen using remote mapping feature? or how can I see only specific records for one remote system.... should i create another field that identifies the source and just map it? ....... generally how do we handle this?
    Also, have uploaded the data for my lookup table DIVISIONS,when i try syndicating it for remote R1......
    in my destination preview i can see some records that belong to only R2 and R3 also. I mean I am not able to see only the
    records belong to R1 system.
    I mapped
    division <-> div
    desc     <-> desc
    there are two more keys like remote key, v...... Should I also map these keys?
    Pls let me know,
    Thanks & regards,
    Vee

    Hi,
    my question is ... should I use this key mapping feature from all look up tables, main table while importing from remote systems?
    should all my feilds have REMOTE KEY enabled.
    1. It is totally dpeend upon business requirement which table you want to  make remote enable.
        The main reason to use remote key is to syndiacte the data to remote system specific.
         So if you are syndication your subtables to then it is good to make remote key enable.
    2. Only tables are remote key enabled not the fields.
    Lets say I have loaded data into my repository from 3 different remote systems(R1,R2,R3) using remote key feature.
    Now, I want to see all the records that belong to R1 only or R2 only?
    Can this be seen using remote mapping feature? or how can I see only specific records for one remote system.... should i create another field that identifies the source and just map it? ....... generally how do we handle this?
    This is not possible as standard way.
    But workaround is when you map the source field to remote key at destination side in import manager,just make the clone of source field and map it to the new fields to  store  the system from where the records came.
    So in data manager you can search on this field  to see only  records that is specific to some remote system.
    Also, have uploaded the data for my lookup table DIVISIONS,when i try syndicating it for remote R1......
    in my destination preview i can see some records that belong to only R2 and R3 also. I mean I am not able to see only the
    records belong to R1 system.
    I mapped
    division <-> div
    desc <-> desc
    there are two more keys like remote key, v...... Should I also map these keys?
    Yes you have to map these fields as well.
    Even after mapping this  option if you want to syndicate all the remote system records then there is option "override remote keys".after enabling this option  there is record generated for each remote system.
    hope it helps you.
    Thanks,
    Sudhanshu

  • Remote Keys for Multiple Systems

    I am working on an SRM project where we have internal catalogs items (from ECC) and external catalog items (from Excel files) going into an MDM Catalog repository.  For both, we use a lookup table for the Supplier number to cross-ref to a supplier name.
    We have a Supplier List message that runs from ECC to MDMCAT to populate this table.  In doing so, it creates a key mapping for the ECC remote system...which gets used for cross-referencing supplier names when catalog items load.
    The issue...we do not have such a Supplier List from the external catalog "remote system", so when external catalog items get loaded there is no supplier number/name cross-ref happening.  I can manually create key mappings for the external remote system, but I want to automate it. 
    I am thinking about having our PI middleware make a copy of the ECC Supplier Lists and send them to a new port set up as the external remote system...thinking that this would generated extenal system keys...hopefully without duplicating supplier lookup records.  Before proceeding, I wanted to throw this out to see if there is a better solution.
    Any suggestions?
    Thanks,
    Keith

    Hi Keith,
    some remarks:
    if you send data from ECC to MDMCAT, the catalog items contain the supplier keys of the ECC system. That's why the import works automatically. If you want to reuse the ECC supplier keys, the first question to answer is: does your external system  use exactly the SAME keys as ECC? Only if this is the case, duplicating the ECC supplier message works for you. Otherwise you'd create keys for your external system that are never sent by the external system.
    If the external system uses the same keys as ECC, the next question is how often do you update the supplier list in MDM? Regularly? Only once? If regularly your option with PI is a good idea. This won't duplicate supplier records as Import Manager (or MDIS) is able to identify already existing suppliers and updates the remote keys only (anyways you should check the related import map!). If it's a one time action only, you can re-open the same file multiple times for different remote systems with Import Manager. Then you wouldn't have to configure an additional connection from PI to MDM.
    Best regards
    Michael

  • Remote key Search in Portal Contents

    Hi,
    I would like to know if its possible to Search Records in MDM based on the Remote Key in the Standard SAP Search Portal contents.
    Regards,
    Tanveer.

    Thanks..
    Any idea if any newer versions support the same..
    Also, Can I enhance the current Portal Contents to accomodate search by Remote Key as the API allows to do the same..
    Regards,
    Tanveer

  • Remote key concept

    Hi Guys,
    I am confused with the remote key concept.
    If we have  tow remote system attached  with MDM then
    How we can create remote key automatically when the data come from systems.
    Is  remotekey+remote system is  unique key for each record.
    If the same data will come from different system but some fields value is different then  how its maintain in MDM and when we tranfer same data to different system from where it came previously then in taht case which data will transfer to each system.
    Query regarding import
    Yesterday i was trying to import the  different languages data in hierarchy lookup table .In the import manager i map each language fields to each destination fields but after importing i get same value in all language fields i.e. whatever info maintain in english.I read  somewhere  how to import multilingual data in hierarchy lookup nad its mentioned that you have to map remote key also.so i want to know  why is necessary to map remote key and if my table is not remote key enabled then in that case how i can trabsfer this multi language data.
    Please help me on these issues.
    Thanks,
    Sudhanshu

    "Two records coming from two different remote systems which hold different values in some fields" looks to me like a race condition between two remote systems updating for example an typo in an address or name field.
    Typical situation: you have local companies holding their indepnedent set of customer data.
    Assume that a customer orders at two local companies at the same time.
    Assume further that during the entry process there was an address update or a small change in the comapny name.
    Assume further someone makes a typo.
    Because of the independency they will update the customer locally and send the update to the mdm.
    So we have now two differnent values for the same record. In this case typically last one wins. So at the end the last record sent will update the mdm to the last golden master value.
    To avoid this situation you can either use MDM as the only entry/update system or put some processes (not only workflows) in place which helps to avoid this situation. In any case bacause of the key mapping both records will map to the single golden master record in the mdm as already mentioned.
    d'accord with the hint: this has to be part of the steady consolidation scenario.
    regards
    lpk

Maybe you are looking for

  • Printing from Standard setting to HP DeskHet 812C

    When I print from the standard printing with color to my HP DeskJet 812C the font is different than what is specified. It also will only print part of the line (it acts like it the font size is to large for the size). However, when I swith the print

  • Sidebar Icons Displaying Incorrectly

    I recently used LiteIcon to change how my folder icons look (because the oversaturated blue folders in Yosemite are ugly, in my opinion) and in the process, it messed up my sidebar icons. They now look like this: When they used to look like this: I d

  • Education and Training Report produce a blank row

    Hi Experts, I run Education and Training Report to get a list of employees education. It shows a list of education report but there's a blank row for some employees and others are not. For employees who didn't have education data, it gives a blank ro

  • I am importing a folder of pictures and they import the same picture?

    Hi,     I am importing a folder of pictures and the picture information is correct but the thumbnails are all the same picture. If I move the pictures onto the time line they are the same picture. I just upgraded from CS3 to CS5. I tried to update th

  • Is TDE in 11g Standard edition ?

    _