Is it possible to upgrade a macbook pro 15 late 2008 memory upgrade to 8 go

Hi from Belgium,
Is it possible to upgrade a macbook pro 15 late 2008 memory from 4 to 8 go. And if yes would i have to replace both memory modules.
I'm also experiencing problems with the battery. Could you tell me if the new replacement batteries are based on the new techonology (long lasting) or if the replacement battery will be the same as the original one.
Thanks and have a good day.
Francis

Hi CMCSK and thanks.
Maybe it's because of the SMC reset I've done.
My computer wasn't responding to the power button when pressed and used to shut down unexpectedly so I did the SMC reset as per the procedure hereafter.
http://support.apple.com/kb/HT3964?viewlocale=en_US
So according to you, the battery seems to work properly and doesn't need to be replaced.
Don't know if it's important but the figures I gave where the one with magsafe connected.
In fact for the time beeing I only use my computer with magsafe plugged.
I just unplugged the magpower and here are the new figures after 10 minutes.
Charge Information:
  Charge Remaining (mAh):          3103
  Fully Charged:          No
  Charging:          No
  Full Charge Capacity (mAh):          3491
  Health Information:
  Cycle Count:          245
  Condition:          Normal
  Battery Installed:          Yes
  Amperage (mA):          -1431
  Voltage (mV):          11816
Are these figures still ok ? Thanks for your help and have a good day.
Francis

Similar Messages

  • Macbook Pro (late 2008) memory upgrade problem

    Hi,
    I have an Macbook Pro (late 2008) 15'' 2.53GHz, 4GB DDR3, GeForce 9400m/9600M GT
    4GB ram are by default. I tried to upgrade ram to 8GB, but my MBP doesn't recognize more than 4GB.
    At Apple website I found information that maximum supported RAM memory is 4GB (which means that I cannot upgrade my MBP with 8GB of RAM), what isn't ok because it is a Pro machine. Are there some chipset drivers upgrade or BIOS firmware upgrade to let notebook to be able to has 8GB?

    At Apple website I found information that maximum supported RAM memory is 4GB...
    Yes, and that same information appeared in the specifications for your machine when you decided to buy it, and also in the owner's manual that came with it. So it's not a surprise — or at least it shouldn't be.
    In spite of that information, and without support from Apple, you can put 6GB of RAM into it in the form of one 2GB and one 4GB module.

  • Macbook Pro late 2008 Memory upgrade Issue

    Dear Gurus,
        I have a late 2008 15" Macbook Pro 2.4 Ghz  with 2 GB 1066 MHz DDR3 installed, I just brought a pair of corsair (2*4GB) DDR3 (CMSO4GX3M2A1333C9) memory upgrade and installed it in my macbook pro. I'm running OS-X Lion 10.7.1 before the upgrade now in About This Mac menu show that I have 8 GB 1333 MHz DDR3 and everything seem to be ok only when I shutdown and power up again the boot time seem to take longer than it is with previous 2GB memory module installed, it took almost 2 minutes from the power button pushed untill my macbook display the login screen. Question: Is the Ram upgrade is OK or I need to return the Ram and get the 1066 Mhz to replace my 2 Gb Ram. How can my mac report that I have 8GB 1333 MHz DDR3 Ram while the system only at 1066 Mhz bus
    Best regards,

    RAM will clock back to match the system bus as long as it's otherwise compatible. Reporting utilities tend to read the RAMs design speed.
    It it works, ignore it.
    As for this part of your question:
    only when I shutdown and power up again the boot time seem to take longer than it is with previous 2GB memory module installed, it took almost 2 minutes from the power button pushed untill my macbook display the login screen.
    that's normal. The OS does a "power-in self test" or "POST" at startup that includes RAM checking. The more RAM installed, the longer the test takes. You quadrupled you RAM, so the increase in start time does not surprise me.

  • Macbook pro late 2008 hardware upgrade

    Hi,
    I’m planning to do upgrade my macbook pro late 2008 (2.66 GHz Intel Core 2 Duo 4 GB DDR3 1067 MHz / NVIDIA GeForce 9400M / 320.07 GB Hitachi and Superdrive).
    I would like to:
    Upgrade memory from 4 to 8 GB via e.g. two PC3-8500 4GB RAM Chip iFixit https://www.ifixit.com/Store/Mac/PC3-8500-4-GB-RAM-Chip/IF111-036-1
    Replace the Superdrive by either e.g. :
    SSD 256 GB Solid State Drive
    https://www.ifixit.com/Store/Mac/256-GB-Solid-State-Drive/IF107-124-2
    or SSD or 512 GB
    https://www.ifixit.com/Store/Mac/512-GB-Solid-State-Drive/IF107-125-2
    or OWC DIY Bundle: OWC Data Doubler Kit + 6G 480GB OWC SSD - http://eshop.macsales.com/item/OWC/DDMBS6E480/
    And use the Superdrive externally via a case
    http://www.macway.com/fr/searches?keywords=Storeva+slim+burner&aff_i=25904&t_edi t=affinitaire_high_tech&aff_v=&aff_a=
    Do you think the investment is worthwhile and if so are there according to your experience better solutions. (faster SSD, faster memory ram or kits specially designed).
    What would be better to replace the SuperDrive by the SSD or to replace the HD by the SSD and the SuperDrive by the HD.
    I have read that on many of the 2008/9 MacBook Pro models, if you put a SATA III drive in it will slow down to 1.5Gb/s. Can you confirm my 2008 can't take advantage of the very fastest SSDs and that it’s better to use a SATA II drive (like the OWC Electra 3G).  
    Thank you for your help.

    Hi again OGELTHORPE,
    You're right my MBP is a 5.1 model.
    Thank you, I take good note for the memory.
    If I understand correctly your answer, there will be no performance difference if I put the SSD in place of the SuperDrive or of the HD.
    Yes I understand your opinion for the cost of SSD. But I am writing from Europe (Belgium) and here MBP are more expensive (+/- 18%) than in your beautiful country. And as I mostly use my Mac for photo editing and surfing I think the memory and SSD will give him a new youth.
    If someone has already added an SSD to a 5.1 model I'm interested in any information about the SSD model and where he installed it.
    Thanks.

  • My macbook pro late 2008 randomly freeze

    Hi I recently upgrade my macbook pro Late 2008 by adding a 250 go Crucial SSD drive in the main harddrive spot. I also put a 1 To HDD in the place of the super drive.
    Since then, my macbook randomly freeze. I can't see any link to any specific usage. It just happen for no reasons. I had to reboot by holding the power button.
    Thanks for your help!
    Here is the informations I collect using the software "EtreCheck":
    Description du problème :
    L’ordinateur gèle sans raisons. Peu importe le moment ou l’intensité de l’utilisation.
    EtreCheck version: 2.1.8 (121)
    Report generated 18 avril 2015 13:21:13 UTC−4
    Télécharger EtreCheck à http://etresoft.com/etrecheck
    Cliquez sur les liens [Cliquer pour l’aide] pour l’assistance avec les produits non-Apple.
    Cliquez sur les liens [Détails] pour plus d'informations sur cette ligne.
    Informations matérielles : ℹ️
        MacBook Pro (15 pouces, fin 2008) (Caractéristiques techniques)
        MacBook Pro - modèle : MacBookPro5,1
        1 2.4 GHz Intel Core 2 Duo CPU : 2-core
        8 GB RAM Extensible
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1067 MHz ok
        Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
        Wireless:  en1: 802.11 a/b/g/n
        La santé de la batterie : Normal - Comptage de cycles 155
    Informations vidéo : ℹ️
        NVIDIA GeForce 9400M - VRAM : 256 MB
        NVIDIA GeForce 9600M GT - VRAM : 256 MB
            Color LCD 1440 x 900
            SMBX2450 spdisplays_1080p
    Logiciel du système : ℹ️
        OS X 10.9.5 (13F34) - Temps depuis le démarrage : 0:7:8
    Informations des disques : ℹ️
        Crucial_CT256MX100SSD1 disk0 : (256,06 GB)
            EFI (disk0s1) <non monté>  : 210 Mo
            New Macintosh HD - SSD 2014 (disk0s2) /  : 255.72 Go (66.29 Go libre)
        ST1000LM024 HN-M101MBB disk1 : (1 TB)
            EFI (disk1s1) <non monté>  : 210 Mo
            Storage Macintosh  (disk1s2) /Volumes/Storage Macintosh   : 999.86 Go (942.51 Go libre)
    Informations USB : ℹ️
        Apple Inc. Built-in iSight
        Apple, Inc. Keyboard Hub
            Apple Inc. Apple Keyboard
        Brother HL-L2360D series
        Apple, Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Logitech USB Receiver
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Gatekeeper : ℹ️
        Mac App Store et développeurs identifiés
    Extensions du noyau : ℹ️
            /Library/Extensions
        [engagé]    com.Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8) [Cliquer pour l’aide]
        [engagé]    com.movavi.driver.SoundGrabber (1.6.5 - SDK 10.6) [Cliquer pour l’aide]
            /System/Library/Extensions
        [désengagé]    com.IKMultimedia.driver.StompIO1 (1.0.0) [Cliquer pour l’aide]
        [engagé]    com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Cliquer pour l’aide]
        [désengagé]    com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.4.23) [Cliquer pour l’aide]
        [désengagé]    com.caiaq.driver.NIUSBHardwareDriver (2.4.23) [Cliquer pour l’aide]
        [désengagé]    com.digidesign.iokit.DigiDal (8.0.1f1) [Cliquer pour l’aide]
        [désengagé]    com.digidesign.iokit.DigiIO (8.0.1f1) [Cliquer pour l’aide]
        [désengagé]    com.ikmultimedia.driver.StealthPedal (1.0.0) [Cliquer pour l’aide]
        [désengagé]    com.maudio.usb.fasttrackpro.driver (1.8.1) [Cliquer pour l’aide]
        [désengagé]    com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) [Cliquer pour l’aide]
        [désengagé]    com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [désengagé]    com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) [Cliquer pour l’aide]
        [désengagé]    com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) [Cliquer pour l’aide]
        [engagé]    com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) [Cliquer pour l’aide]
        [désengagé]    com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) [Cliquer pour l’aide]
            /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
        [désengagé]    com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
        [désengagé]    com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Cliquer pour l’aide]
        [désengagé]    com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Cliquer pour l’aide]
    Éléments de démarrage : ℹ️
        HP IO : Chemin : /Library/StartupItems/HP IO
        Les éléments de démarrage sont obsolètes avec OS X Yosemite
    Daemons de lancement systèmes avec un problème : ℹ️
        [en marche]    com.seagate.TBDecorator.plist [Cliquer pour l’aide]
    Agents de lancement : ℹ️
        [désengagé]    com.adobe.AAM.Updater-1.0.plist [Cliquer pour l’aide]
        [en marche]    com.adobe.AdobeCreativeCloud.plist [Cliquer pour l’aide]
        [échec]    com.adobe.ARMDCHelper.cc24aef4a1b90ed56a...plist [Cliquer pour l’aide]
        [échec]    com.lexmark.bmlaunchd.plist [Cliquer pour l’aide]
        [échec]    com.lexmark.lexnetlaunchd.plist [Cliquer pour l’aide]
        [en marche]    com.Logitech.Control Center.Daemon.plist [Cliquer pour l’aide]
        [en marche]    com.m-audio.fasttrackpro.helper.plist [Cliquer pour l’aide]
        [engagé]    com.oracle.java.Java-Updater.plist [Cliquer pour l’aide]
    Daemons de lancements : ℹ️
        [en marche]    com.adobe.adobeupdatedaemon.plist [Cliquer pour l’aide]
        [engagé]    com.adobe.ARMDC.Communicator.plist [Cliquer pour l’aide]
        [engagé]    com.adobe.ARMDC.SMJobBlessHelper.plist [Cliquer pour l’aide]
        [engagé]    com.adobe.fpsaud.plist [Cliquer pour l’aide]
        [engagé]    com.oracle.java.Helper-Tool.plist [Cliquer pour l’aide]
        [engagé]    com.oracle.java.JavaUpdateHelper.plist [Cliquer pour l’aide]
        [en marche]    com.paceap.eden.licensed.plist [Cliquer pour l’aide]
        [engagé]    PACESupport.plist [Cliquer pour l’aide]
    Agents de lancement pour l’utilisateur : ℹ️
        [engagé]    com.adobe.AAM.Updater-1.0.plist [Cliquer pour l’aide]
        [engagé]    com.adobe.ARM.[...].plist [Cliquer pour l’aide]
        [engagé]    com.facebook.videochat.[expurgé].plist [Cliquer pour l’aide]
        [engagé]    com.google.keystone.agent.plist [Cliquer pour l’aide]
        [engagé]    com.valvesoftware.steamclean.plist [Cliquer pour l’aide]
    Éléments Ouverture : ℹ️
        Steam    Application  (/Applications/Steam.app)
        TimingHelper    UNKNOWN  (missing value)
        gfxCardStatus    Application  (/Applications/gfxCardStatus.app)
        Tabs    UNKNOWN  (missing value)
        AURecvAddHostSheet.nib    Document Caché (/System/Library/Components/CoreAudio.component/Contents/PlugIns/CoreAudioAUUI. bundle/Contents/Resources/ro.lproj/AURecvAddHostSheet.nib)
        Chronicle Mini    UNKNOWN  (missing value)
        MenuTab for Facebook    UNKNOWN  (missing value)
        ElementsAutoAnalyzer    Application  (/Applications/Adobe Elements 10 Organizer.app/Contents/ElementsAutoAnalyzer.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        NIHardwareAgent    Application Caché (/Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)
        AdobeResourceSynchronizer    Application Caché (/Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)
        HP Scheduler    Application  (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    Plug-ins internets : ℹ️
        Default Browser : Version : 537 - SDK 10.9
        Flip4Mac WMV Plugin : Version : 2.4.4.2 [Cliquer pour l’aide]
        iLokClientHelper : Version : 3.5 - SDK 10.5 [Cliquer pour l’aide]
        OfficeLiveBrowserPlugin : Version : 12.3.6 [Cliquer pour l’aide]
        AdobeAAMDetect : Version : AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Cliquer pour l’aide]
        FlashPlayer-10.6 : Version : 17.0.0.169 - SDK 10.6 [Cliquer pour l’aide]
        AdobePDFViewerNPAPI : Version : 15.007.20033 - SDK 10.8 [Cliquer pour l’aide]
        DivXBrowserPlugin : Version : 2.0 [Cliquer pour l’aide]
        Flash Player : Version : 17.0.0.169 - SDK 10.6 [Cliquer pour l’aide]
        LogMeIn : Version : 1.0.961 - SDK 10.7 [Cliquer pour l’aide]
        iPhotoPhotocast : Version : 7.0
        LogMeInSafari32 : Version : 1.0.961 - SDK 10.7 [Cliquer pour l’aide]
        AdobePDFViewer : Version : 15.007.20033 - SDK 10.8 [Cliquer pour l’aide]
        QuickTime Plugin : Version : 7.7.3
        RealPlayer Plugin : Version : Inconnu [Cliquer pour l’aide]
        Silverlight : Version : 5.1.30514.0 - SDK 10.6 [Cliquer pour l’aide]
        JavaAppletPlugin : Version : Java 8 Update 45 Vérifier la version
    Plug-ins internets pour l’utilisateur : ℹ️
        fbplugin_1_0_3 : Version : Inconnu [Cliquer pour l’aide]
    Extensions de Safari : ℹ️
        Searchme [Adware ! - Enlever]
        Antidote
        Amazon Shopping Assistant [Adware ! - Enlever]
        Ebay Shopping Assistant [Adware ! - Enlever]
    Panneaux de préférences tiers : ℹ️
        DivX  [Cliquer pour l’aide]
        Flash Player  [Cliquer pour l’aide]
        Flip4Mac WMV  [Cliquer pour l’aide]
        Java  [Cliquer pour l’aide]
        Logitech Control Center  [Cliquer pour l’aide]
        M-AudioFastTrackPro  [Cliquer pour l’aide]
        Native Instruments USB Audio  [Cliquer pour l’aide]
        Paragon NTFS for Mac ® OS X  [Cliquer pour l’aide]
    Time Machine : ℹ️
        Ignorer les fichiers du système : NON
        Sauvegarde automatique : OUI
        Disques sauvegardés :
            New Macintosh HD - SSD 2014 : Taille de disque : 255.72 Go Disque utilisé : 189.42 Go
        Destinations :
            MACintouch [Local]
            Taille totale : 499.76 Go
            Nombre de sauvegardes total : 29
            Sauvegardes la plus agée : 2013-11-18 17:57:27 +0000
            Dernière sauvegarde : 2015-04-16 16:37:30 +0000
            Taille de la disque de sauvegarde : Trop petit
                Taille de sauvegarde 499.76 Go > (Disque utilisé 189.42 Go X 3)
    L’utilisation du CPU par processus : ℹ️
             9%    WindowServer
             1%    mdworker
             0%    mds
             0%    fontd
             0%    AdobeCrashDaemon
    L’utilisation de la RAM par processus : ℹ️
        490 Mo    firefox
        120 Mo    com.apple.IconServicesAgent
        103 Mo    mds_stores
        94 Mo    Creative Cloud
        69 Mo    ocspd
    Informations de la mémoire virtuelle : ℹ️
        4.58 Go    RAM Disponible
        1.88 Go    RAM Active
        1.11 Go    RAM Inactive
        753 Mo    RAM Résidente
        758 Mo    Pages entrants
        0 o    Sorties pages
    Informations du diagnostic : ℹ️
        Apr 18, 2015, 01:13:39 PM    Examen de soi - succès
        Apr 17, 2015, 06:22:44 PM    /Users/[expurgé]/Library/Logs/DiagnosticReports/Empire Total War_2015-04-17-182244_[expurgé].crash
        Apr 6, 2015, 02:03:41 PM    /Library/Logs/DiagnosticReports/Kernel_2015-04-06-140341_[expurgé].panic [Click for details]

    Hi r.w.p & welcome to the forums...
    Some or all of the following may be necessary - try in this order:
    1. Try resetting your PRAM/NVRAM ( http://support.apple.com/kb/HT1379?viewlocale=en_US ). If everything isn't fixed, then continue to follow the steps here including resetting your SMC ( http://support.apple.com/kb/HT1411 ) if necessary.
    2. Use Font Book to eliminate all bad and duplicate fonts.
    3. Reinstall (or install for the first time) the .6.1 and .6.2 updates by downloading and installing the combo updater ( http://support.apple.com/kb/DL959 ).
    4. Reinstall 10.6 using your Snow Leopard install DVD by installing Snow over Snow using the upgrade method. Test your system after returning to 10.6. If is good there, then you may not want to re-install the.6.1 & .6.2 updates - if you do, then use the combo updater again ( http://support.apple.com/kb/DL959 ).
    Still no joy, take it to an Apple Store and ask staff there for assistance.

  • Flashing Question mark: New hard drive not working Macbook Pro late 2008

    After following several peoples advice on this forum I decided to upgrade my Macbook Pro late 2008 with a Seagate (1TB) Solid State Hybrid Drive 2.5 inch.
    Heres the device.
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    After creating a mountable boot on a External hard drive with Mavericks install I removed the current hard drive and replaced with the new seagate drive. However it didn't seem to recognize the external hard drive (it is quite old but works perfectly) and went to a flashing grey question mark screen and wouldnt do anything else. Ive tried holding down command-r and option-r but I get nothing. Its just the same flashing question mark. I have done this several times and the same result.
    I put the old drive back in and it works fine.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer?
    Appreciate your help
    Gary

    Sorry I think you may be confused.
    I am trying to install the new Seagate hard drive to my mac (not as an external hard drive).
    I replace the macbook pro hard drive with the seagate drive:
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    I then started up the machine with a usb external hard drive with a boot copy of mavericks on it. However, it just displayed a flashing question mark and wouldnt start booting the osx.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer? Im guessing it must be hard drive. Would it be better to use a USB pen drive as the external hard drive is quite old?
    Does anyone know what the problem could be as the hard drive is brand new.
    Appreciate your help
    Thanks, Gary

  • Trackpad non responding for wake up on macbook pro late 2008

    i mentioned a problem with my macbook pro late 2008 since upgrading to 10.8. while clicking the trackpad to wake up my macbook air 2011 everything works fine, but on my macbook pro late 2008 it wouldn't. i have to click either the spacebar or any other key on the keyboard. otherwise no issues with the trackpad. is there anything different to the air, is there a fix or is it just normal. thanks for replies. greez.

    Yes. That wouldn't hurt. I do have a couple of other suggestions:
    1 - create a new test library, import a few photos and see if the import succeeds. If it does then the problem is with the original library.
    2 - if the test import crashes log into another account on your Mac, create a test library if there isn't a library there, and see if you can import. If you can't then a reinstall of iPhoto would be the next step.To do so you'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder. Reinstall iPhoto from the disks it came on and apply the latest updates.
    3 - if you can import successfully in the second account your primary account is the culprit. It could be a preference file other than iPhoto's that's causing the problem. Here's how to determine if that's the case.
    Trouble Shooting Preferences in Leopard
    1 - Create a folder titled "Preferences A" on the Desktop.
    2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
    3 - Make a duplicate copy of the Preferences A folder on the Desktop as a precautionary backup.
    4 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
    NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
    5 - If the problem is fixed:
    A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
    B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
    C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button as seen here.
    6 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.
    OT

  • Internal HD upgrade or external HD for my Macbook Pro (Late 2008)

    Hello,
    I am finding the 250gb internal hard drive not enough and want to upgrade to a 500gb/1tb hard drive for my macbook pro (late 2008 edition).
    What I am wondering is whether to change the internal hard drive OR buy the fastest possible external hard drive for my mac which I believe is one that works with firewire 800 as my late 2008 macbook pro does not come with USB 3.0.
    The external hard drive I have found is £110 and my macbook would be using the Firewire 800 connection:
    LaCie Rugged Triple 301984 1TB USB 3.0 and Firewire 800 5400 rpm Portable Hard Disk Drive
    http://www.amazon.co.uk/Rugged-Triple-301984-Firewire-Portable/dp/B005C2BNJI
    I dont necessarily need the portability of a external hard drive. I work with large files (photoshop, illustrator files mainly) and would would be concerned that I would not be able to work directly on the hard drive for this type of work so an internal hard drive may be better/
    Can anyone suggest a good, fast, cheap, popular internal hard drive compatible with my computer and whether you would suggest changing the internal HD or buying an external.
    I am running Mavericks and the only other change I have made is by upgrading my RAM from 4gb to 8gb. Thanks so much for your help
    Hardware Overview:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro5,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.4 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache: 3 MB
      Memory: 8 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: MBP51.007E.B06
      SMC Version (system): 1.33f8
      Serial Number (system): W8******1G0
      Hardware UUID: *****
      Sudden Motion Sensor:
      State: Enabled
    <Edited By Host>

    For both convenience and speed, I'd recommend replacing the internal hard drive.  Your MacBook Pro can handle nearly any internal SATA 2.5" HD on the market, including 7200rpm models. For what it's worth, I'd recommend a Western Digital Black WD7500BPKX or similar or Hitachi HGST 7K1000 although in my experience Hitachi drives run hot and that's the reason I don't use them as internal drives.
    FW800 is fine, but then you have an external hard drive to lug around plus the connection is considerably slower than the internal SATA connection used by the internal hard drive.
    Note that you will have to either 1) clone your existing drive to the new drive or 2) completely reinstall OSX and all your apps from scratch to the new drive when you replace the internal drive.   If it were me, I'd take the opportunity to reinstall everything from scratch.
    btw, I have done this myself on a number of 2008/2009 MacBook Pros and it's not hard at all.  iFixit has tutorials on how to do this.  (Here is a link to the one that I believe is your model.

  • Random hard freezing issues, Windows 8 64-bit on Macbook Pro (Late 2008)

    Hi,
    I recently upgraded to OS X 10.8.3 and got a hold on copy of Windows 8 64-bit. As I'm running on my old trustworthy 15 inch Macbook Pro (Late 2008), my hardware is officially unsupported. Over the years I've had XP, Vista, Win7 32-bit and 64-bit running running on the same machine, and thought I'd give Win8 a chance.
    To be able to install Win8 on my unsupported hardware, I tricked the Bootcamp assistant that I was going to install Win7, and after the reboot and start of the Win7 installation, I exited the installer, rebooted, switched DVD to Win8 and did the installation from there. So far so good. For installing the Bootcamp drivers, I followed the instructions in https://discussions.apple.com/thread/4894920?tstart=90.
    Now, the machine runs just fine with Windows 8, and I've installed some basic third party applications (Firefox, Spotify, Steam). However, I get completely random hard freezes on the machine (sound looping, no other activity whatsoever) during normal use. These can occur 20 minutes after start, or 3-4 hours in. The freezing behavior is very much similar to how my model can behave under overheating conditions (which mostly have occured in past Windows versions while gaming), however overheating doesn't seem to be the issue here (based on simple palpation ).
    Have anyone experienced a similar problem, or know something about it? My current idea is that some weird things are going on with the Bootcamp drivers, so unless anyone comes up with a suggestion I might try doing a rollback to the point before I installed the drivers to see what I can make of it.
    Thanks!

    Had a few similar short system freezes, after installing Windows 8 x64 on 13” MacBook Pro Mid-2010 with BootCamp 5.0.5033.
    There is a suggestion that DisableDynamicTick may fix the problem: https://discussions.apple.com/message/21565295#21565295. There were similar topics at Microsoft forums: 1, 2, 3. It was said “that this will likely reduce system battery life, so it should be undone when you update your Windows build or if it doesn't resolve your issue”, and that “this problem is resolved in the release versions of Windows 8”.
    Another possibility is that there is indeed a buggy driver, within BootCamp 5.0.5033, or a 3rd party, like a wireless network driver in the following case http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/system-fr eeze-randomly-after-installing-windows-8/49488183-26cf-4389-af21-a85dc366c99a?pa ge=2#LastReply.
    The problem has been noticeable on my MacBook, but not annoying enough yet to spend time troubleshooting. If you find a robust solution, using the links above or other method, it would be interesting to know.
    HTH

  • Instaling ML on Macbook pro late 2008 from dmg problem

    Hello all
    a friend of mine has a macbook pro late 2008 with snow leopard installed.
    He wanted me to clean install the machine and install ML on it
    i checked the requirements and i saw that this is possible
    went on my mac mini and restored the image file to a usb stick and holding option key while booting i started the process
    first erased the hard drive and then  back to main screen press install ML
    the next screen after confirming that i agree  the dialog box was reading tyhe instalation files..it went throughh till the last bit and then just stuck there!
    left it almost all night and nothing happened
    Any ideaw on how to proceed?
    Maybe the installation image that i have used is only for my mac mini and that is the reason that this happens?
    a possible solution is to install snow leopard again and inform him to buy the software so as to be machoine specific from the mac app store?
    Any help will be much appreciated
    Many thanks

    Your friend has to purchase OS X Mountain Lion with his/her Apple ID. If you install OS X Mountain Lion without having purchased it with his/her Apple ID, he/she won't be able to reinstall OS X Mountain Lion if it gets damaged, so this is dangerous.
    He/She must purchase OS X Mountain Lion, so he just have to open  > Software Update and install all available updates. Then, open App Store and purchase OS X Mountain Lion, so it will be downloaded into his/her MacBook and the Mountain Lion installer will show up when the download finishes, so just follow the steps to upgrade to OS X Mountain Lion.
    He/She should make a backup of his/her files with Time Machine or Carbon Copy Cloner before upgrading, and also, check if the applications are compatible > http://www.roaringapps.com
    The OS X Mountain Lion version used is the same for all Macs (except the 13-inch MacBook Pro with Retina display, and the Late 2012 Mac mini and iMac because of driver problems), so this is not a problem

  • HT3053 Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?

    Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?
    My battery got swollen (and I unfortunately noticed it very late and might have be running with it for months, which potentially explains all the crashes everyday and the trackpad not working anymore, the Apple test also says I have a bar of ram broken...) and I had to remove it because the back pannel did not close anymore... Can I still use my MBP normally forever that way? I was planning on buying a new mac anyway but maybe waiting for the next iMac upgrade in the year... Should I wait?

    Other than the system shutting down instantly if you have a power outage, whcih could corrupt the OS. Nothing else bad will happen.

  • Focusrite Saffire 6 USB (1.1) with Macbook Pro late 2008

    Equipment-
         Macbook Pro Late 2008 w/ Yosemite 10.10.2
         Focusrite Saffire 6 USB (1.1)
    The Saffire 6 is a audio interface using USB 1.1 to connect microphones to my Macbook. It has 2 inputs and 4 outputs. I've had this unit for years and has worked fine. I realized today that I haven't used it since upgrading to 10.10 (Yosemite) and wasn't able to get it working. When I try to set it within Sound Preferences, all devices, In and Out, go blank, then come back constantly. It will even change Built-In Mic to "Unknown".
    The Saffire website (http://global.focusrite.com/usb-audio-interfaces/saffire-6-usb/downloads) lists two different driver choices to use, but one is labeled specifically for 10.8.5. The other just says "Mac". I'm certain my device is USB 1.1. If it were 2.0, I wouldn't need a driver. According to the website, I should use the 2.9 version.
    How can I check to see if all previous driver installations are clear?
    Is there anything I can check to make this thing work? The Focusrite website (http://us.focusrite.com/answerbase/are-focusrite-products-compatible-with-osx-yo semite) says that the Saffire 6 USB is compatible with Yosemite.
    I've emailed Focusrite and I'm hoping between them and this forum, I can get this working again.
    Thanks!!

    I've spoken to Focusrite. They had me try a number of things. I tried some of my own things.
    Different USB cable
    Deleted VodBurner device
    Repaired Permissions
    Installed/Uninstalled 3ivx codec
    Reset PRAM
    Performed Safeboot
    Removed Startup items
         Growl, Sizeup, Crossover CD Helper, Dropbox
         Disable MagicPrefs from Autostart
    Still not able to get it to work. The device will work on an XP computer but I don't have another Mac to try it out on. Any suggestions?

  • Macbook pro late 2008 13 inch won't run 8 gb ram

    Hello, I have a question that has been bothering me for a while now.
    I bought a 4gb Ram Module at best buy, it is 1066GhZ DDR3 SODIM.H from PNY to upgrade my macbook pro to 8gb of RAM, everything was going well, I got home and opened up my macbook, inserted the module and turned on my mac.
    Everything started working fine until I tried to open google chrome, my machine went into a kernel panic and restarted itself.
    Being as I am, I decided to wipe my machine and re-install mountain lion (I run it because mavericks slows down my computer) but my machine wouldn't let me install it.
    I opened my computer up again, re-installed the 1gb module from the fabric and the computer worked well.
    Now, my question is this: Isn't my computer able to run 8 gb in RAM? I already upgraded my firmware and read a bunch about it on the internet and have done everything necessary but my computer won't accept the module!!
    I really would like to know what is going on :/
    My specs:
    Macbook pro late 2008 unibody
    Version 10.8.5
    H2.4 GHZ Intel core 2 duo processor
    5 gb 1067 MHz DDR3 memory
    Model Identifier: MacBook5,1
    Boot ROM Version: MB51.007D.B03

    According to http://mactracker.ca database (free download) the MacBook Pro
    13-inch model identifier5.1 you've stated that you have, is Not as you've said.
    However, there was a 15-inch with the 5.1 model identifier.
    •How to identify MacBook Pro models
    Be sure to correctly identify the MacBook Pro model, and then get high quality
    RAM of proper specification of known good brand for Apple portables.
    Find an Example of correct spec RAM, by model & identifier; display size, build year:
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade
    The budget name brands seldom work well in Apple products; they do OK in some
    models of old computers or loose-spec PCs. OWC/macsales and crucial.com are
    two better known reputable suppliers of upgrade parts for Macs. Be sure to match
    the correct part to the exact spec for your computer.
    •How to identify MacBook models
    •The MacBook 13-inch (Aluminum Late 2008) -- is not a MacBook Pro:
    Model Identifier    MacBook5,1
    Model Number    A1278
    EMC    2254
    As such the RAM spec according to MacTracker is as follows:
    Maximum Memory    8.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
    OWC site points to this page for RAM. Double check detailed specs:
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
    Good luck & happy computing!
    edited 2x

  • MacBook Pro Late-2008 Battery Can't Keep a Charge.

    I understand I bought my MacBook Pro Late-2008 just before they upgraded the MacBook batteries; it's never held a good charge, so I've had to keep it plugged in. Lately I've been finding myself needing it when outlets might not be readily available.
    After I remove the power cord, it doesn't stay charged for more than 3 minutes, 30 seconds (I've timed it more than once). Even with its age, this seems like a significant problem with the battery.
    I'm really not sure it's worth it to spend $130 on a replacement battery, and I'm not in a position to simply get a new MacBook.
    Are those third-party batteries actually legit? Is there a chance that an Apple Store might be able to take care of it? I'm well past the life of my Apple Care, obviously, but three minutes for the battery?
    What is my best option? Or just suck it up and deal with having to find an outlet wherever I go?
    Thanks.

    There are many third party batteries that are at best suspect.  I have seen on Amazon what appear to be legitimate OEM Apple batteries which I suspect are graymarket products.  You may try that at your own risk.  If you purchase from Apple. you will know what you will be getting and with a warranty.
    Ciao.
    OWC has what appears to be a battery that will fit your MBP.  They are a reputable vendor for Mac compatible products,
    http://eshop.macsales.com/item/NewerTech/BAP15MBU54RS/
    Message was edited by: OGELTHORPE

  • MacBook Pro (Late 2008) won't start up

    Since December 2012, my MacBook Pro (late 2008) refuses start up. After trying many, many things (from online forums - nothing worked), the solution I found by hit and miss is to heat up the back of the laptop in front of my fireplace (or with a hair dryer), to remove the battery, to wait a few seconds and then to put it back in; after doing this, it turns on without a fuss and remains in perfect running condition until I turn it off again. I now leave it on 24/7 when at home, and I don't dare taking it away with me again... Seems to me a contact got loose and the heat expands it just enough to make it work again. Manufacturing problem?
    Has anybody else got the same or a similar problem? I hope to fix this without going to an Apple store if possible, as it's not under warranty any more...
    By the way, I have since replaced the battery and the hard disk, but that particular problem remains; I'm running OS X 10.8.2.

    It coule be one of two things:
    1) Your hard drive has become corrupted, and you'll have to reinstall the OS and cut your losses.
    2) Your logic board is fried. I seriously hope that this isn't the problem, but if it is, then it's time for a new mac.
    My macbook pro was stuck on a bootup loop, and I finally had to reinstall the OS. This fixed my problem. On the other hand, I had this same problem on my iMac, and an OS reinstall didn't do anything.
    Before making any judgements, take it to the genius bar and get some expert advice.

  • MacBook Pro Late 2008 (Unibody) doesn't boot

    Hello,
    my good old MacBook Pro Late 2008 running Mountain Lion won't boot anymore. The sleep light does not light on, the green battery status indicator light is showing that the battery is full. I had this problem two or three times, and usually my Macbook comes magically back to life after one or two days.
    At the Apple store they said I'd have to make a SMC reset, and when they did it in the store, it worked. But it doesn't work for me (and I am sure I am doing the same thing, so maybe the Apple guy was just lucky – or is there another special trick?). What could be the solution to my problem?
    Unfortunately, I can't really tell the exact specifications, but it is the standard model, and I didn't change anything since. I just had the problem that it was getting really hot like half a year ago, but then I cleaned the fans and since then it was running rather fine (just sometimes froze).
    Any help greatly appreciated!
    Julian

    I've got the same, or almost the same problem on a MBP 2008 (late).
    MBP 15.4/2.53/2X2GB/320/SD/512VRAM upgraded to 8 GB 1067 DDR3 (OWC memory)
    In my case the computer works fine when I'm able to get it on. If it is turned off and the MagSafe charger disconnected then left that way for a few hours, and the MagSafe is re-connected, let it charge for a bit, it can often be turned on via the power button. HOWEVER, .....
    If it is left OFF overnight (Apple > Shut Down .... ), and the backlit keyboard goes dark, then a little pause before closing the lid, and left overnight, it will usually not be able to be turned on. The battery is in reasonably good condition (~+3500 mAh) and the newer battery (~ guess +5000 or more mAh) it doesn't do any better, and it won't turn on. Cycle count 183.
    Take the battery out, (disconnect the MagSafe first! Never have the MagSafe charging without a batter in the computer) wait half a minute, reinstall battery (I like the 5,1 because the back section can be easily removed to access the battery and the hard drive), attach the MagSafe charger then wait a bit (few minutes), and the computer can often be turned on the first time. If not the first time then repeat the process. Tried hitting the Power button with the battery off but that doesn't seem to change anything.
    Erased the HD (Hard Drive) and reinstalled Yosemite, have Fire Vault turned off, did a Utilities (Cmd + r ) check of the hardware (no problems), also did a few other tests - no problems. PRAM reset. Investigated BONJOUR - haven't gone into the Terminal yet. Would be nice to disable Bonjour without disabling DNS. https://www.apple.com/support/bonjour/ and http://apple.stackexchange.com/questions/151485/how-do-i-disable-bonjour-visibil ity-after-yosemite-install and http://forums.obdev.com/viewtopic.php?f=1&t=6106
    The Genius Bar tested it and couldn't find a problem. Suggested the Logic Board be replaced and that i$ expen$ive! I've investigated having the Logic Board repaired and that would cost around $150 + shipping. Won't do the oven trick. Other problem sources I've come across is the graphics chip (mainly on the 2008 (early) MBPs.
    Since erasing and reinstalling OS X Yosemite the computer really screams but I've started to reinstall some of the applications (FCPX & Motion), Documents, and Movie files. Still screams though! Nothing like a real cleaning of the hard drive. Didn't do a Time Capsule-type backup because I wanted to minimize "junk". The CanoScan LiDE 90 scanner won't work because Canon won't come up with a driver to work with Yosemite. Won't buy a Canon scanner again and didn't want to buy it to begin with due to a previous Canon problem. Bought a new Canon camcorder, $1,600 + tax, back when they had mini-tapes, it at the Maxwell tape but just outside the warranty period and wanted something around $500 to fix it. Turned out that was a typical problem.
    Really running out of options and ideas at this point. Hate to send it off to repair the Logic Board. Still looking for a software or setting fix.

Maybe you are looking for

  • Spent a good hour on all of this and still the same problem, Im done with CL products for go

    I do all this to the T as the Creative Labs tech asked me to and I still have a stuck mute button on my windows sound properies and as I sais earlier whenever I change the REC in Surround mixer it automatically muts anything I select it to. I have al

  • Home network and FTP giving diffrent drive letters

    I have my iTunes library on a home server and I have it synced to that drive letter (i.e. X:). When I am remote, which is often in my job, I ftp in and get a different drive letter (i.e. T:). When I attempt to do anything it is telling me it can't th

  • Problem Downloading After Affects!

    Hello, I am currently trying to download Adobe After Affects Trial. However, When I try to download the Adobe Download Assistant I am meet with an error message saying " This application cannot be installed because this installer has been mis-configu

  • Block Credit Card information flow from ECC to CRM

    Hi All, Need help!! How to block Credit Card information flow from ECC to CRM? Can any filter be applied in any adapter objects for doing so? If so which is the adapter object and corresponding Table name. The ECC tables are VCNUM and VCKUN. But no a

  • Changes Made in ACR....

    When I edit a picture out of Bridge into ACR .The changes don't show up in Lightroom. How can I change this? -Bridge CS6 -ACR 7.1 -Lightroom 4.1