Is it possible to upgrade my Aluminium 20'' iMac Core 2 Duo to an i7 ?

I have an 20'' aluminium core 2 duo imac and want to upgrade it to an i7. Is this possible, if it is then is it hard? I have been told that the sockets may be different, therefore, preventing me from upgarding my CPU. Is the socket of the core 2 duo CPU different than the i7 CPU?

Not possible, different architecture.

Similar Messages

  • TA48312 i have an imac core 2 duo with 10.4.11 with creative suite 2 and 3. which os should i upgrade to?

    i have an imac core 2 duo with 10.4.11 with creative suite 2 and 3. Yes, I know it's old... Which OS system should I upgrade to to be able to use CS2/CS3?
    Thanks!

    i have an imac core 2 duo with 10.4.11 with creative suite 2 and 3. Yes, I know it's old... Which OS system should I upgrade to to be able to use CS2/CS3?
    Thanks!

  • Upgrading RAM on a MBP Core 2 Duo

    Hi,
    I have a MBP C2D 17inch, 2.33 ghz with 3 gig of ram. The newer version now upgrades to 4 gig of ram. Is it possible to do the same with mine?

    It might void the warranty. Some have reported that it's possible, but performance gains are admittedly unclear. I wouldn't, if I were you, go above the board's specifications.

  • 24" Imac core 2 duo if video can be upgraded V2.0 What Apple can be LOL

    As far as I have read it supports MXM Laptop type video card.
    If it can be changed or not ????
    Waiting for http://babelfish.altavista.com/babelfish/trurlpagecontent?lp=ja_en&trurl=http%3a%2f%2fwww.kodawarisan.com%2f2k2006%2farchives% 2f2006%2f09%2faa_imac_aaaa1.html
    to list photo's of one dissasembled before I buy.
    Macvidia / MacNvidia drivers might help current version 1.08 if it can be done.
    Below is some photo's of a nvidia Go 7800 gtx MXM laptop video card almost 2 years old simmilar to what might be used in the 24" core 2 duo Imac.
    I have a 7800 gtx GO pci-ex 16 one in my ZIPPO laptop with core duo 2.16ghz and it rocks.
    Ebay sell the PCI-ex ones for $500 @ 7900 GTX 512mb vram pushing 800 million thingy's per second min. and 35GB/s through put max 68C temp playing F.E.A.R. highest / highest settings 1024x??? resl. for my 7800 gtx ($300 Ebay)laptop ZIPPO one.
    http://www.bit-tech.net/hardware/2005/09/28/eveshamnvidia7800/2.html
    Below some spec's for cards.
    http://www.rojakpot.com/showarticle.aspx?artno=305&pgno=5
    Hope this helps someone.

    I think it is a stretch. Snow Leopard forum has had a lot of people "comment" it is a memory hog and sluggish on older hardware.
    Setup the dual boot, but 160GB isn't a lot, and Ive seen too many under estimate how much space to allocate to Windows 7 in Boot Camp.
    It all depends on what and why, like gaming is never good in a VM.
    And Windows 7 Pro? why? Word? I guess Word 2011 or 2008 for Mac won't cut it? Seems like if you must that kind of thing might do in a VM.
    Try Windows and Word with VirtualBox.
    Post your question to VMWare Community.
    Apple is contradictory on Windows questions. I don't think people here are (or not too much). I didn't like Fusion enough to give up running Windows natively, and I've got hardware to handle it.

  • How do I upgrade OS X 10.5.8 on my iMac with Intel duo core processor

    I have an iMac 24" with 2,16 Ghz Intel Core Duo processor and 2Gb 667 Mhz DDR2 SDRAM running on OS X 10.5.8 to Lion?
    I know I have to upgrade first to snowleopard???
    If so SnowLeopard is not available in the iCentres etc.
    What to do??
    Brgds,
    Nils

    Your iMac is a Core 2 Duo not a Core Duo according to this http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.16-24-inch-sp ecs.html
    Which is good since the specifications for OSX Lion require a Core 2 Duo as minimum processor:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.
    Some features require a compatible Internet service provider; fees may apply.
    The road to OSX Lion requires you to have OSX Snow Leopard before which can be bought from Apples Online Store http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA but is not avaiable as a download.
    After installation of OSX Snow Leopard and installation of neccessary updates to it you can then use the Mac App Store to buy OSX Lion and install it.
    http://www.apple.com/macosx/how-to-buy/
    For OSX Lion an upgrade of your RAM to 4GB might be advisable.
    Stefan

  • I have an iMac 5,1 with an Intel Core 2 Duo. I'd like to be able to use iCloud, but need Lion which is too big. How much memory can I add? And will this upgrade allow me to install Lion?

    I have an iMac 5,1 with an Intel Core 2 Duo. I'd like to Lion, in order to use iCloud, but the specs indicate I don't have enough memory. How much memory can I add? And will this upgrade allow me to install Lion?

    I believe your model iMac can address 3 GB RAM; the minimum for Lion is 2 GB - however, that is an absolute minimum for very light use. You would be much happier with a minimum of 4 GB.
    http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.16-20-inch-sp ecs.html
    (You can install 4 GB, but it will only be able to address about 3.1 - 3.2 GB)

  • Pentium D to Core 2 DUO Upgrade question

    I have a lenovo Serie 3000-J110, model 7393HDS with a Pentium D 325.
    1) Can I upgrade the motherboard to a Core 2 DUO E4300 or E6300 ?
    2) Do I need special changes in the operating system, or just change the processor and ready to work?
    Thanks in advance.

    1) Did you mean Pentium D 925? (Never heard of 325.)
    2) What is your current motherboard chipset?
    You don't need anything special but you need to take note which CPU your motherboard supports. I did a lot of upgrades by myself. My original configuration:
    Pentium D 925 - 512MB 533MHz - 280W PSU - Intel Onboard GFX
    Now, see my signature...
    P/S: I sold all the used parts online to salvage the cost.
    Message Edited by kamweng on 08-21-2008 05:53 AM
    3000H Series (DOP 04/2007) - Core 2 Duo E4600 2.4GHz - 2GB 667MHz DDR2 - 460W Cooler Master eXtreme Power Plus - ATI Sapphire X1950XT 256MB GDDR3 - Windows XP SP3 - Altec Lansing VS2421

  • I have macbook pro core 2 duo 2.33, why can't I upgrade to mavericks

    Can someone help?
    I read a list of models that can be upgraded to mavericks, macbook pro core 2 duo 2.2, 2.4  & a bunch of others can be upgraded, only the 2.33 is not on the list. why? what can I do to upgrade to mavericks? (my book meets the memory, space and software update requirement).
    thanks!!!

    Check via Software Update whether any further updates are required, particularly to iTunes.
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    or Mountain Lion:
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

  • Mac Pro's (early 2008) Back up plan towards a possible OS upgrade to Yosemite

    Hello All. Here’re some of the details/background info…hopefully all this won’t be so annoying. Your feedback is highly appreciated. Thanks a bunch!
    I have 2 Mac Pro’s (Early 2008) 3,1 both running SL (10.6.8). One I have been using non-stop throughout these years, I’d call it MP 2008 (A). The other one once belong to a friend who actually bought it around the same time I purchased mine, only that he didn’t use it much and just recently decided to sell it to me. I’d call it MP 2008 (B). Both MP’s are very light on data on the main, boot HD, just applications,… as everything I work on is kept in external hard drives and backups. I do not usually download any third party stuff (only when strictly necessary for my work) and essentially it’s all about the software and applications (Adobe CS3 and LR 0.2) I need to do my pretty basic work.
    All pretty old stuff by now, I know.
    Following a couple of mishaps and lots of good advice in these forums, (thanks to the hatter, etc.) I went ahead and bought 16GB of RAM for both, and an NVidia Graphics Card (all from Amazon.com) for my MP 2008 (A) to replace it after it went bad, and everything has been working just fine. As you can tell, I have not tried to upgrade much, but rather keep everything stock and running as smoothly as possible.
    I am afraid the next big, important thing I MUST do is back up my almost 6 years-old HD (I know, it should’ve been done long ago). Frankly, I have never done it before because I didn’t even know that could be possible…I learned about it right here, in this forum. In this sense, much I have also read (here) about the SSD option, and about how great of an upgrade that could be too, but I have decided to stick to the regular 3.5” for now. (I just recently found out those SSD even existed!). Hopefully, once I gain a bit of confidence on how this works I’ll jump into the SSD option, cards, etc. So, I purchased 2X 3.5” SATA III HD’s to try cloning my MP 2008 (A) boot, main HD and get this process over with.
    QUESTIONS
    QUESTION #1: After installing the internal hard drives in bays 2 and 3: Do I have to specifically format them in order to turn them into bootable copies? If so, how do I do that? I have read about using ‘Disk Utility’ to format external hard drives for this purpose but I don’t know if that would apply for internal hard drives as well.
    QUESTION #2: What are the settings/features you all recommend I should select/or deselect on CCC so I can have exact, bootable copies of my original HD? No fancy stuff, advanced options, etc…just what I need to have good enough copies that just work.
    QUESTION #3: How do I test them?
    I noticed that under “System Preferences/System/Startup Disk” I can select the drive/system I want to use to start up my computer from. My question is:
    QUESTION #4: Can I permanently choose any of the Mac Pro four (4) bays/bootable hard drives as the main drive/system for startup? I always thought I could only be done from the original, ‘main’ bootable drive in bay 1.
    QUESTION #5: What if the copy fails? How do I go back to the HD that works or to the next copy, for that matter?
    About my MP 2008 (B): In an effort to sell me his MP, my friend (as knowledgeable as I am) messed up something that delays the start up a lot. I noticed that in the finder, the applications appear double, etc., so I am not so happy with it. Even though the little house icon has his name in the finder, he was able to make me the Administrator for the machine (I don’t know how). But again, it starts up to the typical chime, then a gray screen for quite a loooong while, then the apple logo, then the loading animation…and theeennnn it starts…and no known issues from there. In other words, I am sure he messed something up there while transferring this machine to me and now its startup is so delayed.
    QUESTION #6: Let’s say that both the bootable HD copies I created on my MP 2008 (A) work fine: Can I take one out and install it in my MP 2008 (B) and eventually turn it into my startup drive and work from there too? Will this eventually lead to conflicting stuff? (Two machines, same identical cloned start up drive??).
    Eventually, the plan is that I learn how to do all this so I can move on and upgrade with a clean install of Yosemite pretty soon.
    Hopefully, both my Mac Pro’s 2008 A and B will last me a bit more and I can get to squeeze a few more seasons from them. They are awesome machines!
    As you can tell, in theory I might have a little bit of a clue, but all is in the details. If you don’t mind, please shed some light on this process I am about to begin…thanks a bunch!

    Thank you!
    Kappy     Nov 24, 2014 3:01 PM 
      Re: Mac Pro's (early 2008) Back up plan towards a possible OS upgrade to Yosemite  in response to Juan Huerta      
    All new drives need to be partitioned GUID and formatted Mac OS Extended, Journaled before they can be used.
    OK, is that an option I'll be prompted to by the OS or do I have to "tell" that to...Disk Utilities (?)
    If cloning is your purpose then use Disk Utility's Restore option. It will clone the drives and their Recovery HD partitions automatically.
    I didn't know that Disk Utility had an option for cloning a bootable drive...is it better than CCC? (I have used neither one) I really would like to save $40 and avoid downloading additional software/applications...please if you don't mind...what option would that be once I click on "Disk Utility"? If you know of a good link or reliable article on the topic that will work for me too.
    Test a clone be trying to boot the computer from it.
    Any bootable drive in any bay can be used to boot the computer. Use Startup Drive preferences to set the desired boot volume.
    Erase the target and try again.
    But if the computer fails to start because I didn't create a good copy, how do I go back? Keyboard shortcuts? I keep reading that a wired keyboard must be used...and that's scary. If that's true, could I hook up any of my Windows based keyboards via USB?
    Erase the drive and install OS X. You cannot use any software installed by the prior owner that was purchased via the App Store including OS X. You must start from scratch. (this actually is 5B rather than item 6.)
    Well, he created an Admin account for me and I have been handling updates and everything with the new password he created for me. I wonder if I could access the Apple Store with my ID though...it's all under my name in that computer though, so I figure that at the Apple Store I'd just enter my ID...I guess, I have not tried that yet
    Yes.

  • I got a mid 2011 macbook air 13 with 128gb ssd is it possible to upgrade my storage?

    i got a mid 2011 macbook air 13 with 128gb ssd is it possible to upgrade my storage?

    It is entirely possible, as many have known from day one (as ifixit's first teardown revealed). Unlike the unupgradeable memory, the SSD is a discrete expansion card that is removeable with just one screw, after removing the case cover. It is however debateable as to whether such an expansion is worth the possible risk of making demonstrable changes to the MBA whilst still under warranty. So you may want to stave off consideration for a while.
    I made the upgrade recently on my older 2010 MBA, and it was easier than upgrading the HDD on my old MacBook Pro.
    Here OWC/Mac Sales has kits and instruction videos.

  • I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics. Is it possible to upgrade the RAM and the graphics card?

    I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics card. Is it possible to upgrade the RAM and the graphics card?

    The RAM can be upgraded as indicated below. The Graphics card can not be upgraded.
    Maximum Memory
    6.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

  • Is it possible to upgrade the 10.5.8 OS on  a MacBook Pro with a 2.4 GHz/Intel Core 2 Duo with 2 GB of RAm to the latest OS?

    Is it possible to upgrade the 10.5.8 OS on  a MacBook Pro with a 2.4 GHz/Intel Core 2 Duo with 2 GB of RAm to the latest OS?

    The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...
    Next... Check that your Mac meets the Requirements for Mountain Lion.
    Upgrade to Mountain Lion
    With Regard to ML...  Check here for compatibility of 3rd party Software you may be using... Also note that Rosetta is no longer supported in Lion and Mountain Lion...
    http://roaringapps.com/apps:table
    You should also consider more RAM... Get the Maximum you can for your Mac...
    It is important to get the Correct and Matching RAM
    See Here  >  OWC RAM  >  http://www.macsales.com
    The above site also has videos on how to Install RAM should you need it...

  • Qosmio E10: Is it possible to upgrade the graphic adapter?

    Hello there,
    I have a question regarding a Qosimio E10. Is it possible to upgrade the graphics Adapter to a more recent one. (Now : Geforce FX 5200 Go 64 Mb) Because the one i use now is ot of date and I dont want to buy a new notebook just because of a Graphics Card !
    Thanks for your help
    Marco

    Hi
    No, its not possible because the graphic card is a little small chip which was fixed on the mainboard. The graphic card design is not the same like on the PC desktop.

  • Satellite A100-207: Is it possible to upgrade graphic card for gaming

    Hi
    I am looking to buy the Toshiba A100-207 laptop and it comes with 128MB of shared graphics.
    I would like to play games and I was wondering if I could upgrade the graphics (such as a nvidia card that I could buy and put in) or are the graphics fixed?
    I would just like to know if I am able to upgrade?
    Thankyou

    Hi
    In my opinion the graphic card and/or the CPU is not soldered on the new notebook generation. The parts should be simply plugged on the board.
    But this does not change the upgrade situation.
    Possibly you will be able to remove the graphic card but Im sure you will get compatibility problems with other hardware.
    The stronger graphic card produces more warmness and the temperature would increases automatically to a higher level. This would lead to the overheating issue and the notebook would either shut down or not starts.
    The desktop PC technology is simply different as on the notebooks. You can also not compare the different graphic cards. Notebook manufactures uses only the graphic card chips which dont supports an own cooling module.
    Simply said its not possible to upgrade the graphic card.

  • How far is it possible to upgrade a Mac Pro mid-2010 to the maximum extract.

    Hello
    How far is it possible to upgrade a Mac Pro mid-2010 to the maximum performance. I would be interested how far one could come close to the performance of the new Mac Pro 2013, or is it hopeless.
    My computer
    Mac Pro
    mid-2010
    Processor 2 x 2.4 GHz Quad-Core Intel Xeon
    Memory 14 GB 1066 MHz DDR3 ECC
    Graphics Card ATI Radeon HD 5770 1024 MB
    Software OS X 10.9.1 (13B42)
    Please excuse my english is not the best because.

    For what apps?
    Okay, you have the slower 2.4GHz processors, most have found that MHz still rule and matter, meaning a 6-core 3.4GHz for some applications (most) was the best and the sweet spot.
    So you could upgrade to a pair of 3.2GHz 4-core (cheapest) rather than splurge on two 6-core 3.34GHz (more expensive and more cores).
    First thing to do, put the system on a 256GB Samsung 840 SSD.
    For photoshop and graphics, invest in some more SSD ($US300 for 500GB) and put those on a PCIe SSD controller ($300 Sonnet Tempo Pro) and put Aperture/Lightroom on one, and use the 2nd SSD for scratch.
    RAM: 24-32GB would probably help all but the more casusalist of user.
    Tips and articles:
    http://www.macperformanceguide.com head to the TOPICS main page and there are dozens of sections each a different area of upgrade and optimization for applications. Storage, memory, how to, use arrays, backup strategy.

Maybe you are looking for

  • Hi All,Where can any send me material on ABAP-HR urgent please

    Hi All,Where can any send me material on ABAP-HR urgent please . Thanks&regards. Bharat Kumar.

  • IDVD - what brand of disk and burn speed?

    I have an ibook and bought a Sony DVD burner. I have OS 10.3.9, and the Sony DVD burner said it was MAC compatible for OS 10.4 or later. So I got Patchburn and the DVD works. However, I've got a really crappy burn when i watch it on a DVD player. I r

  • JCO_COMMUNICATION_FAILURE Error at message procesing

    Hi all, At a productive XI server we are having a lot of errors in message procesing. Please take a look: <SAP:Error xmlns:SAP=" http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustU nderstand=""> <SAP:Cat

  • How to change double spaces to single space

    For some reason that I don't know about, the majority of the time that I download a PHP or HTML document from the web server to my local PC the document gets double spaces injected into each line of code. In HomeSite there is a simple command in the

  • Passing a parameter in the query string

    When a string containing a �+� is passed as a parameter in the URL in the query string through a POST request, it is interpreted as two strings separated by a �+� and thus when the string is retrieved through a request.getParameter (),it returns the