Is it possible to upgrade only one program from a suite?

For our company I need to make a plan for upgrading all systems to the same Indesign version. Two computers are on CS3, and two on CS5.
We have for all programs the Standard Suite. As we mostly work with Indesign, and the prices are such (in the Netherlands) that the full
upgrade will be above budget at this time. I already discovered that it is not possible to upgrade individual parts from a suite...
so that leaves us a little in a tight spot. What are our possibilities? The best way would be to purchase two 'old' CS 5 suites, as 5.5. is not
really needed.
I do think that a complete upgrade from CS5 to 5.5 is not justified, as you get identical Photoshop and Illustrator versions, and Acrobat X
is (as discovered after some trial runs) inferior to Acrobat 9.
There is currently a promotion on Adobe Netherlands, but that still leaves us to about 2000 euros... for 4 upgrades,
and at this moment this is just too much.
But come what may, next year the same song will be sung, and prices will not getting lower... ;(

Our company mostly uses CS3 still. Only two workstations have CS5 installed, and it took a lot of convincing to update those two macs ;(
Another issue that we only have two Intel-macs (we have two work-sites, so we have one in each) and the other macs are G5...
Our work consists mainly of getting PDF files and checking these for CTP. At my work-site we create more files or change them.
At the current crisis time our management is very very cautious to invest in new hardware and software. But I have warned them that the different and older versions will create more problems, and come what may; they will have to upgrade sooner or later.
Appreciate the answer, Bob! I am still learning DPS and Edge looks great!

Similar Messages

Activating only one program from Design and web?

So, I downloaded the trial of design and web and decided I only wanted to buy Photoshop because $1800 is a bit too much for me, but I need the program.
I don't want to have to re-download it because it already took 3 hours for design and web to download.
so is there a way to individually activate the programs, or is it a packaged deal?

No, it's not possible. You need to download the separate program and install it.
Mylenium

I have not bought only one program only

I have not bought only one program only
It SSH
Gath message from you it was reported that I bought three programs and this is not true
This is the body of the message
Or maybe pressed Balkhtae
Can canceling
Greetings,
Billed To:
Tamer Salama
EGY
Order ID: MH*****MDD
Receipt Date: 21/01/13
Order Total: $21.97
Billed To: Visa .... 0450
Item
Developer
Type
Unit Price
SSH-Terminal, v3.2.2 (4+)
Write a ReviewReport a Problem
PRAKASH KATARIYA
App
$0.99
Dont Touch This, v1.2 (4+)
Write a ReviewReport a Problem
Se Young Kim
App
$0.99
iSniper 3D Arctic Warfare, 224K Credit Pack
Report a Problem
TRINITI INTERACTIVE LTD
In App Purchase
$19.99
Order Total:
$21.97
Please retain for your records
Please See Below For Terms And Conditions Pertaining To This Order.
Apple Inc.
You can find the iTunes Store Terms of Sale and Sales Policies by launching your iTunes application and clicking on Terms of Sale or Sales Policies
Answers to frequently asked questions regarding the iTunes Store can be found at http://www.apple.com/uk/support/itunes/store/
Server Admin Remote
Harlekins
Magic Lock Screen
Panorama Concepts
VNC Viewer
RealVNC
https://phobos.apple.com/WebObjects/MZFinance.woa/wa/accountSummary
<Personal Information Edited By Host>

Posting personal information ina public forum is a very bad idea.
We are all users like yourself, no one here can do anything about your account.
If you have issues, report them to iTunes Customer Support... they are the only one's that can make changes to the account or reverse charges.

Would it be possible to export only one response, such as only the highlighted one?

Would it be possible to export only one response, such as only the highlighted one?

You can use the "Show details" option in the View Responses tab:
Once you activated the detail view, you can export the detail view (that contains a single response):
thanks
Roman

If I purchase creative cloud membership for only one program, will I get a paid adobe phone gap build account for free?

$djd phonegap create my-app
$ cd my-appIf I purchase creative cloud membership for only one program, will I get a paid adobe phone gap build account for free?
$ phonegap run android

There is no additional payment for phone gap build .
Please refer to http://helpx-internal.corp.adobe.com/content/help/en/dreamweaver/kb/phonegap-build-cc-2014 -update.html
Regards
Rajshree

Import only one object from transport request

Hello,
I have a transport request with some programs. I've not imported this request yet. And I would like to import only one program or just look at its source code. Is it possible with help of any standart SAP functionality?
Thank you in advance,Sergey.

Hi,
Go to SE10 and display the transports for your username. Select the task number (not transport no.) and hit display object list icon. There you will see all the objects in the task. Hit change button and you will see delete icon enabled. You may select the objects you do not want to transport and delete it from the task.
Version > 4.6C may have different screens but still the functionality is available
Raj
Reward points if helpful

I have no problem connecting my i-phone programs to my tv through apple tv. but one program from an application from appstore don't go through apple tv. It says an error occured while loading the content.This is just for one program. All other works good.

My apple TV works fine with my I-Phone 4s. But one program from one of the application I downloaded from the app store dont work. When I load that a message comes "an error occured while loading this program" This is only for one program all other most of the time works good. Any one knows why ?

Hi there Mundaplackel!
I have an article here for you that can help you troubleshoot the functionality of that app that you have purchased from the app store, and should be able to give you some steps that will help you resolve the issue:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks for using the Apple Support Communities!
Cheers,
Braden

How can we call creen of one program from some other dynpro Program

Hi,
Is it possible to call a screen of one program from some other program as pop up or full scree.
please give you input if it is possible.
Thanks in advance.
Thanks and Regards,
Praveen.

Hi,
But is there is any function module through we can call screen of some other program. PLease let me know if you are aware of that.
Thanks

"Can I select only one page from a PDF document to convert to an excel doc. ?"

"Can I select only one page from a PDF document to convert to an excel doc. ?"

No, so extract one page, then convert.

HOW TO TRANSFER ONLY ONE APPLICATION FROM AN OLD MACHINE TO A NEW ONE

HOW TO TRANSFER ONLY ONE APPLICATION FROM AN OLD MACBOOK TO A MACBOOK PRO ?

THERE IS AN EASY WAY TO TRANSFER SONGS & PHOTOS
BETWEEN IPOD & IPHONE
SIMPLY USE TRANSPOD APPLICATION ON BOTH DEVICES
THEN
DO IT
(U HAVE TO BE ON THE SAME NETWORK)

How can I transfer only one song from itunes to my iphone?

How can I transfer only one song from itunes to my iphone without sync ( the whole library)?

Untick every thing you dont want to transfer, tick only the ones you do want to transfer.

Adobe Updater requires password when I launch any program from the suite

It is very annoying, but not a destructive issue.
When I launch any program from Creative Suite 3 Design Premium (6 programs) the Adobe Updater pops out and asks for a password. I can either provide a password and proceed, or deny the password and still proceed with the program.
Is there any way to stop the Updater from popping up?
I have it on my two machines Mac Pro (2x 2.66 GHz, 11GB RAM) and Mac Book Pro (2.33 GHz, 3GB RAM).
I am sure that there is some settings which I simply overlooked. Can anyone point it to me?
I would appreciate that. Thanks.
Jack

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

I had upgraded to firefox 3.0 years ago and lost my firefox 2.0 bookmarks. How do I retrieve them? I keep getting only one bookmark from the html file.

Years back I had installed Firefox 3.0 (at launch, so not beta) into a separate program folder. After installation, I expected to have my bookmarks saved. Recently I found out my bookmarks were in application data and I found out I had one profile. That meant that my firefox 2.0 bookmarks were replaced.
I read up on the FAQs and it stated that bookmark backups only save the previous 5 days or so, so I don't think they are usable though I have them saved. The bookmarks.html file in my profile shows only one bookmark after importing it into firefox 3.5 and firefox 2.0 (downgraded back to check it out), google chrome, and internet explorer. I still have the bookmarks.bak and bookmarks.html.bak files as well.
A little backstory before I got up to this point because it's a bit convoluted because I thought I could retrieve them like IE favorites which were easy:
1) Switched to Firefox 2.0 from Internet Explorer and got several hundred bookmarks.
2) Got HyperBookmarks add-on which bugged up and replaced my previous bookmarks folder though it stated in FAQs that my original Firefox 2.0 bookmarks were in a separate folder so I didn't worry about it.
3) Upgraded to Firefox 3.0 and it replaced all my bookmarks with nothing in bookmarks list. I thought it was saved because I installed Firefox 3.0 in a separate folder.
4) Retrieved 3.0 Bookmarks and Archived them, but wasn't able to find Firefox 2.0 Bookmarks (original) nor the HyperBK version, except in HyperBk Backups folder.

In the "Edit this Bookmark" window, use the 2nd drop-down button, that is to the right of the "Folder", to open a larger window that will allow more folder to appear. See the sloppy red arrow on the screenshot below.

Is it possible to upgrade only 1 memory slot in a Macbook Pro?

I have a 2010 Macbook Pro 7.1 running Maverick and I want to upgrade my memory from the standard 4bg. Is it possible to add a single 8gb card in one slot and keep a 2gb in the other? I have read that this model can run up to 16gb but I'm not sure I need that right now and I don't want to spend the extra money right now. The reason I am thinking of getting one 8gb card is so that later on I can easily upgrade to 16gb later if I change my mind.
I was thinking of buying this:
http://www.ramexperts.com/owc-owc8566ddr3s8gp-8gb-2-x-gb-204-pin-ddr3-so-dimm-dd r3-1066mhz-for-all-macbook-pro-13-15-17-2008-2009-2010-unibody-models-all-macboo k-13-unibody-mac-mini-2009-later-imac-2009-models-2407.html

Not all models can accept modules as large as an 8GB module. Some models can accept additional sizes beyond what Apple specifies, others can not.
It seems prudent as a general guideline to ask first, rather than assume
"this MacBook Pro" = "ALL MacBook Pro"
and end up owning modules that do not work in your specific model.
Yes, both statements are true, but regardless of the maximum size of module supported, I believe all the portables can run with only one module installed or with two unmatched modules. I will assume we both agree with regard to adhering to Apple's recommendations rather than OWC's.
Yes, always best to ask first. That's part of adhering to the Five P's - Proper Planning Prevents Poor Performance.

Possible to encrypt only ONE email folder?

I would really love some help with this; I've been banging my head against the wall trying to achieve something that is seemingly so simple and basic.
We want to use an Email app that will allow us to encrypt only ONE email folder. Access to the rest of the email should be open to all users of the computer, just the one folder needs to be encrypted or password protected. Apparently this is not possible in Outlook, because in Outlook for Mac all of the folders are now integrated into one database and so cannot be encrypted individually as they can on PC.
Does anyone have any suggestions of how to achieve this? I am considering using Mac's Mail, but can't find Mail file structure on my Lion machine to see if I can access the individual mailboxes separately. Does anyone know where to find Mail's folder structure? I looked in the Library but found nothing for Mail, as it used to be in previous OSs.
Am open to third party software work arounds, other email clients, whatever. I would really appreciate any suggestions!

Does anyone know where to find Mail's folder structure? I looked in the Library but found nothing for Mail, as it used to be in previous OSs.
It's located in your user Library folder which is now normally hidden in Lion.
In the Finder hold down the option key to reveal the Library folder and select Go>Library>Mail and you find the Mail files.
Matt

Is it possible to upgrade only one program from a suite?

Similar Messages

Maybe you are looking for