Is it possible to upgrade the processor from a powerpc G4 to intel with the mac mini

Is it possible to upgrade the processor of a mac mini Tiger OS x10.4 powerpc to an intel processor?

No.
Allan

Similar Messages

  • Is it possible to upgrade the Mac Mini's graphics card if I bring it into the Apple Store?

    I wanted to know if I bring in a Mac mini to the Apple Store, can they upgrade the mac to a AMD Radeon 6330M? If not, what can I do to play games a bit better?

    Nope, sorry, I believe it's part of the Logic board, not much you can do, but how much RAM do you have?

  • Is it possible to upgrade the mac mini hard drive?

    I have a 2009 mac mini (so before the most recent redesign). Would Apple be able to upgrade my hard drive to a 500gb or 1TB drive? Is it feasible to do it myself?

    Michael, you did ask "is it feasible to do it myself?" so Jolly Giant reasonably showed you some legitimate online guides which confirmed it is. 
    You need to decide if money is no object (in which case ask Apple, and they'll charge you a lot) or consider DIY if you're handy with tools. 
    Sure, there's a risk, but it's small and that comes back to balancing the risk against the costs.  Many, many people have upgraded the HD in their mini, just as you asked, for just the cost of the new disc: c.$50??
    "dubious and invasive"  is a bit extreme.  How else do you think you might swap out the HD?

  • Is it possible to upgrade the Mac osx 10.5.11 dual 2.7 Speaking to the issues Such as Mac OS X 10.6

    Is it possible to upgrade the Mac osx 10.5.11
    dual 2.7
    Speaking to the issues
    Such as Mac OS X 10.6

    There isn't a OSX 10.5.11.  It looks like you are asking about how to upgrade from OSX 10.4.11 (as suggested in your profile) to 10.6 (or was this another typographical error and you meant 10.5?) on something with a dual 2.7 processor.  If you are talking about a G5 or any G series Mac then you cannot upgrade further than OSX 10.5 Leopard (the forum in which you posted this question).  Only Intel Macs can run 10.6 and greater.
    It would help to know exactly which computer you are using, which exact operating system version it is using, and which one to which you wish to upgrade.

  • Is it possible to upgrade the Mac Pro with SCSI/SAS drives?

    Hi guys I am considering to move on to a Mac Pro from my old PC.
    The Mac Pro enclosure is quite unique in its hard drive holders as no cables are used and all drives are connected with a plugin mechanism.
    So I am curious if that will allow me to upgrade to a SCSI/SAS storage system which requires cable connections between drives and the SCSI/SAS card on the PCI-E slot. I dont know if this will be possible with the Mac Pro enclosure.
    Has anyone tried to do this？
    Btw is there any Ultra320 or SAS(preferably) interface card available for Mac OS X?

    The connectors for SATA drives can be used with SAS drives. However, the controller needs to be SAS compatible. I have never installed a SAS drive in the Mac Pro bay to see what happens. If some one has a SAS drive and wants to try this I would be interested in the results.
    My guess is that the Mac Pro would not see the drive.
    Areca sells the Mac Pro PCIe bootable ARC-1680 SAS controller in several configurations. This controller allows the user to utilize SAS or SATA hard drives connected to the card. The ARC-1680x comes with two external mini SAS connectors that can support eight direct connect hard drives or up to 128 devices (in theory) when used with SAS expanders.
    The ARC-1680LP has one internal mini SAS port and one external mini SAS port. I looked at the Mac Pro internal SATA connectors and they can unscrew from the frame but there is only about 1/2" of clearance in that area of the case. In addition, I would want the hot swap bays to still operate and I did not see an easy way to patch into the existing SATA connectors. It would be nice if the Mac Pro factory connectors used snap on SATA connector on the back of the backplane so that users could interface the 4 SATA bays with an internal PCie controller. However, its hard wired in the existing configuration. With the new Mac Pro PCIe RAID 5 card on the market there must be alternative connectors that allow this type of installation to work properly.
    Based on the ease at which the Areca SAS controller can be added as an external using the ARC-1680x I went with that option. I am using it with eight direct connect SATA hard drives now. I plan to expand the storage by adding a SAS expander in the form of a hub or an enclosure with SAS capabilities. I have been looking at a 16 bay SAS enclosure but I am not sure how loud it will be
    Details on the ARC-1680 can be found here:
    http://www.areca.com.tw/products/pcietosas1680series.htm
    Its very cool to have SAS or SATA capability along with a bootable card that can support tons of hard drives and RAID levels 0, 1,1E, 3, 5, 6, 10, 30, 50, 60 or JBOD . I booted the Mac Pro with a 2TB Mac OS X 10.4.10 RAID 6 volume and ran Xbench. It shows a 400MB/sec. hard drive setup and raises the overall Xbench score substantially.
    While I doubt I will boot the Mac Pro from the RAID 6 volume much, it is very cool that that function is available. This is the only PCIe host adapter I have found with boot capabilities besides Apples new $999 4 port SATA internal card. SAS has lots of expansion capabilities. Users that want pretty much unlimited hard drive connectivity will enjoy the new ARC-1680x.
    Have fun!

  • Is there any possibility to upgrade the iPad mini for using more GB?

    The Last update needed 1,9 GB and i had to cancel some apps to start the update. I would like to upgrade my iPad mini.

    No, you cannot upgrade the amount of storage.

  • Is it possible to Replace the Mac Mini HD

    I currently have :
    Intel ICH7-M AHCI:
    Vendor: Intel
    Product: ICH7-M AHCI
    Speed: 1.5 Gigabit
    Description: AHCI Version 1.10 Supported
    ST98823AS:
    Capacity: 74.53 GB
    Model: ST98823AS
    Revision: 7.01
    Serial Number: 5PK20YQK
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 54 GB
    Available: 19.72 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s2
    Mount Point: /
    NO NAME:
    Capacity: 20.21 GB
    Available: 9.47 GB
    Writable: Yes
    File System: MS-DOS FAT32
    BSD Name: disk0s3
    Mount Point: /Volumes/NO NAME
    I would like to install
    A Seagate 250GB Internal Ultra ATA/100 7200 RPM 16MB Cache 3.5-inch Drive.
    is it technically possible. If not what Drive can I install to increase the disk space. I'm almost maxed out.
    Mac mini Intel Core Duo 1.83 GHz   Mac OS X (10.4.8)  

    No, this HD will not fit inside your Mini!
    These are the spec's off the HD inside the Mini:
    SATA 2.5 inch
    The 3.5 inch HD you mentioned will not fit inside the mini because it is just to big, it really need to be a 2.5 inch drive. Also the HD you mentioned has a ATA connection, but you can only put a S-ATA (Serial-ATA) HD inside the Intel Mini!
    You better go with a external HD if you want to have much more space. The 2.5 inch HD's are only available up to 200 GB. With a external HD you will get much more GB's for less money!
    Hopefully this is helpfull or solved your problem. Consider rewarding some points!
    Please see the "helpfull" and "solved" button's on top off this message! Apple: Why reward points?

  • Is it possible to use the Mac mini as the start up disk with an older iMac (the basketball with moveable screen) as the monitor?

    I really, really love the moveable screen to our old desktop iMac, and would hate to lose that feature, but, let's face it, it isn't Intel.  Since you can use other hard drives as start-up disks, would it be possible to do so in this instance? and how difficult would it be?

    A slim chance, only if the new Mini was running a Universal version of 10.5.x, which the newest ones cannot.
    But, you could display & run the Mini on the old iMacs screen with Screen Sharing on the Mini, & the iMac using Chicken of the VNC...
    http://sourceforge.net/projects/cotvnc/files/cotvnc/Chicken%20of%20the%20VNC%202 .0b4/cotvnc-20b4.dmg/download
    Assuming the iMac is running an OSX version the CoVNC can use.

  • HT4814 Is it possible to manage the mac mini server with server app before set up?

    The article says using the server app I need to enter the IP address, then the Administrator name and password, but obviously on the first boot these are not configured yet. The article does not mention if this is possible or the server.app can only manage the server after its initial configuration using a monitor connected.

    From dim memory...  Load Server.app on the client box or use Server.app on some other handy server, and either configure DHCP with the server's MAC address (usually listed on the shipping box) and your intended static IP address and then boot the new target server box, or just boot the new target server box and use Bonjour Browser or the command-line dns-sd tool to find the IP address that the new server box has acquired from DHCP, and then in either case, connect to the new target server via Connect To Server in Server.app via its IP address, specify the root user and use the system serial number (again, usually listed on the shipping box) as the password.

  • Connect an amplifier (Rotel RA 12) to the mac mini with USB plug?

    Is it possible to connect the mac mini with an amplifier via usb?

    Hillbille
    I have a Mac Mini and a Rotel RA12.  As you have found out, you can use the optical out from the 3.5 mm output jack to act as an optical input on the RA12.   This option works fairly well to give you a pretty clean sound.  However, there are other options available to you.
    One option is to use the headphone out as an analog signal using a tradtional 3.5 mm to RCA (split) cable, and running it to the analog inputs on the back of the RA12.  This will provide sound, but not quite up to the quality you will be getting using the optical out.  The reason being that the music signal is being processed by the internal DAC on the Mac instead of the better DAC in the Rotel.  The other obvious reason is the quality of cable is typically not up to snuff using that route (although, you can get some high end 3.5 mm to RCA cables).
    Another option would be to use USB output from the Mac Mini and hooking it up to the USB input on the front of the RA12.  This is how I play music from my iPad mini through my Rotel and it works well.  Again, however, you are using the DAC of the Mac equipment instead of the Rotel and are limited as to what type of fileyou can play. For example, you can't play FLAC or 24 bit 88kHz files. 
    A third option, as someone already mentioned, is to get a USB/SPDIF converter, then run a COAX cable to the back of the Rotel RA12.  Depending on the quality of the converter, this is your BEST option for audio quality.   Using something like an M2Tech Hiface 2 converter will provide a high quality, jitter free signal between the Mac and the RA12. 
    Within that third option are two "sub-options" for music playback.  You can use iTunes to play back the music through the USB/SPDIF converter directly, or you can use a third party application that will bypass the volume control of the MAC to give you a much purer signal.  An example would be Amarra or Audirvana. 
    If you choose to use iTunes only, the sound will still be "okay", but you will not be able to play FLAC files or SACD ISO files.   You also won't have much control over the signal processing.   Either of thrid part applications I mentioned will give you the option to play other audiophile grade files, and give you a far better sonic experience compared to iTunes, and they can also be integrated with your iTunes library.  They will also allow you to utilize Direct Integer mode, upsampling, etc ... so that you can have a 44.1kHz file upsample to 192kHz at the Rotel, or have it upsampled to 192kHz in the Mac (using the 3rd party software) before it is sent out to the Rotel.  It just give you much more control over the signal. 
    The last option option above will give you an audiophile grade signal that will allow your Mac Mini to be used with very high end audio equipment with no comprise to the sound.  It will rival the very best of CD or SACD players on the market.  It also sounds incredible and you can use it in conjuction with the Apple remote app to control your music through an iPad.  

  • Is it possible to upgrade the processor in a J2V78UA, 15-f009wm laptop?

    Is it possible to upgrade the processor in a J2V78UA, 15-f009wm laptop? It has a
    1.0 GHz AMD Dual-Core Processor E1-2100 Accelerated Processor, would like to do something a little more powerful.

    Hi,
    Processor on your machine is one of the following CPU's for the series:
    ● AMD E1-6010 (1.35 GHz, 1 MB L2, 1333MHz DDR3L), dual core, 10 W
    ● AMD E1-2100 (1.0 GHz, 1 MB L2, 1333MHz DDR3L), dual core, 9 W
    ● AMD A8-6410 (2.0 GHz, 2 MB L2, 1600MHz DDR3L), quad core, 15 W
    ● AMD A6-5200 (2.0 GHz, 2 MB L2, 1600MHz DDR3L), quad core, 15 W
    ● AMD A4-5000 (1.5 GHz, 2 MB L2, 1600MHz DDR3L), quad core, 15 W
    ● AMD E1-3000 (1.65 GHz, 1 MB L2, 1600MHz DDR3L), dual core, 15 W
    ● AMD E1-2100 (1.0 GHz, 1 MB L2, 1333MHz DDR3L), dual core, 9 W
    Processors Processors are attached to the system board.
    It short NOT upgradable. You need a new motherboard (= new machine).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Will it be possible to upgrade the software from LR 4 to LR 6?

    I own  LR 3 (full) and LR 4 (upgrade). Will it be possible to upgrade the software from LR 4 to LR 6 directly?

    In the past,  the upgrade version of Lr upgraded all versions from v1 onwards, and I see no reason why this should not be true this time, but can make no promises, mainly because I have no connection to Adobe.
    So yes, you will probably be able to do as you want.

  • It's possible to upgrade the processor in my HP TouchSmart IQ775 Desktop PC to a Intel core i7?

    I'm trying to see if is possible to upgrade the procssor AMD Turion 64 x2 Dual Core TL-58 on my IQ775 for a Intel Core i7...
    This question was solved.
    View Solution.

    Not possible, the processor architecture is incompatible, you can only swap for other similar AMD CPUs

  • Is it possible to upgrade the graphics card on a mid 2012 MacBook Pro? And is it possible to upgrade the RAM without voiding the warranty?

    Hi I was wondering if it is possible to upgrade the graphics card on a MacBook Pro and the RAM without voiding the warranty? I have a gt 650m in my MacBook Pro, non retina, and to me, its not enough power for me, so i was looking around, and I found a retailer that would give me a nvidia gtx 660m for a decent price. Also, the ram needs to be at least 12gbs, to ensure that my computer would run fast.
    If you can help, please tell me,
    Thankyou.

    No, the video card cannot be exchanged - you have a pretty decent GPU there; not sure why you'd want to switch it out. You can upgrade the RAM to a maximum of 16GBs. Apple recommends upgrading in matching pairs, so I don't really think I'd try 4GB and 8GB stick.
    Both Crucial and OWC have memory available for the new Macs. Both are reputable dealers and know Macs well and I would only buy from these sources (and I would buy Crucial, were it me).
    Although your Mac didn't come with a users manual outlining the installation of the additional RAM, you can download the late 2011 model users guide as the models themselves are almost identical.
    Good luck - write back with any questions.
    Clinton

  • Is it possible to upgrade the graphics card in the HP ENVY 17-j053ea?

    Hi
    I'm considering buying the HP ENVY 17-j053ea for use as a portable workstation for applications such as Max Design, autocad and photoshop as a second system for when I need to be away from the office but still need the ability to work.
    This machine seems to have a lot of bang per buck and is more in line with my budget than a full on portable workstation.
    As far as upgrade options I presume I could max out the ram at 16GB and put in an SSD as the main OS and application drive and use the main 1TB drive as the mass storage unit.
    What I'm wondering is if it possible to upgrade the graphics card in this machine?
    I don't imagine I would be attempting such an upgrade myself but assuming I leave it into a professional is this possible.
    My worry is that with some of my heavier model files I could feel the limitations of the mid range portable gfx card onboard. I could probably live with it if it is not an option but just putting feelers out.

    Thanks for the reply Paul
    I see.
    That doesn't sound feasible so.
    I can manage the other 2 upgrades within my budget but things seem to get quite expensive on the higher end platforms very quickly.
    It's my first foray into the laptop/workstation arena so I'm not that familiar yet with clever upgrade strategies.
    I did have the use of this model for a few days and It is a really nice overall laptop, both aesthetically and value wise.

Maybe you are looking for