Is it possible to use a Cisco 2800 IOS H323 voice gateway for video conferencing over ISDN?

I have seen this page and was wondering if what it says actually is possible and works? I also have got a CUCM 8.6 that I would like to use for call routing via my old 2600XM gatekeeper.
http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t11/h320gw.html#wp1047659

Similar Messages

Is it possible to use a still frame as a picture from a video you have recorded on an iphone 4?

Is it possible to use a still frame as a picture from a video you have recorded on an iphone 4?
Message was edited by: derekfromco kildare

Might need a little more information here. Are you trying to obtain screen captures? If all you're wanting to do is take stills from your videos then the answer is yes, you can but you'll have to transfer your videos from your iPhone to your computer first (unless you can find an APP on the iTunes store to help you to do it on your iPhone).
There are a few ways to do it. The first is that you can use the button on your keyboard called "Prt Scr" or "Print Screen". This takes a shot of your screen which you can then "paste" into a program like paint, or photoshop or even Word to then save as a jpeg image. When using this option a good trick is to use "Alt" + "Prt Scr" to only capture the current window rather than your entire desktop.
The other way to obtain screenshots is to download and install a program designed to do this for you. A great site to find something free to help you out is www.tucows.com. Try this link: http://www.tucows.com/search.html?search_scope=win&search_terms=screenshot&searc h_type=all
Also, some DVD programs have this function in built in them so it's a good idea to explore what's already installed on your computer.
Hope this helps!

Is it possible to use an existing imac (2009) as a monitor for a new mini

Does anyone know if it's possible to use an existing imac as a monitor for a new mac mini?

Unless it's a late 2009 27-inch iMac, all of the ways of doing it require an existing network connection, which requires a standalone monitor.
(106796)

Is it possible to use a Nokia mobile phone as a modem for my ipad2, which hasn't, got 3G. If so does anybody know how?

Is it possible to use my Nokia X6 mobile phone as a modem for my Ipad2, which is not 3G enabled. If so how?

You need to download something called JoikuSpot from the Nokia Store, they were giving it away free last week. You then follow the instructions to basically set up a little wifi hotspot, look at the settings carefully and create a password to get on it, by default it creates an open network so anyone can use it.
HTH

Is it possible to use Time Machine with an external hard drive for two separate computers?

I'm looking to purchase an external hard drive to use as with time machine as a backup for two separate computers. I'm not sure if I should buy 2 EHDs and dedicate one to each computer, or if Time Machine has the capacity to back up both computers separately. Anyone have any experience with this?
Thanks!

You can make two partitions on a single drive and dedicate one to each computer.
The pic is of a single external usb drive with three partitions( a Time Machine and two image backups) for two computers

Anyone used VisionNet system "designed to provide real-time streaming video feeds over the Internet"?

I'm a Mac user and we only have Macs at home. My son just started preschool, which offers a VisionNet system--"a state-of-the-art system of cameras, servers, and software designed to provide real-time streaming video feeds over the Internet." However, on the VisionNet FAQ page, it specifies the following:
"You need a web browser that is Java-enabled, perferably Microsoft Internet Explorer. If you're running Microsoft Internet Explorer, it needs to be version 6.x or higher. We recommend Internet Explorer 6.x as this is the latest and most up-to-date product release. Some Windows XP and Windows XP Professional users will have do download a Java runtime environment in order to use the VisionNet system if they have not done so already."
We don't have any PCs at home, so I tried to log in using my MacPro desktop, my old MacBook Pro and my new MBP. Basically, for the last 3 weeks I've managed to access the site only ONCE from my desktop and after the time-out session, I wasn't able to log on ever again (I just cannot enter any keys on the Username and Password fields at login). If I hit the Logon button from the FAQ page, I get an "Unauthorized Access" pop-up message: "This site may only be entered from an authorized web site! Please enter this site from your childcare provider's web site." When I enter "OK" I immediately get a pop-up menu "Confirm Dialog Preference. Prevent this page from creating additional dialogs" but I still can't enter any keys at login. It does nothing!
The "support guy" has NO knowledge of Macs, so I don't know where else to go. The fact that I had successfully logged on once makes me believe it's something I have to update/delete/add in my Preferences in Firefox (I've used Safari and Chrome with no success). I've also considered purchasing an inexpensive PC just for this lousy VisionNet system but I want to see if anyone has any ideas or advice.
Can anyone please help me? Thank you in advance!

Here is a link to the finished PSA at Vimeo. It is not an outstanding production or anything too special, but it is worth noting that while some of the stills were doctored in Photoshop, the entirety of the editing and motion graphics were done in Premiere CS6.02; and the timeline playback was RealTime thanks to the MPE Hardware Acceleration and a GTX 560 2GB.
DUI PSA
Happy Editing.

Is possible to use Time Capsule as a external hard drive for my MA ?

Hi,
I wondering to know if i can use the time capsule as a external hard drive for my MACBOOK AIR i mean i dont want a backup i just want to be connected when i'm at home and transfer the data to the time capsule or simply uses data from there.
Thanks!

Yes, you can.
(60321)

What programs are better to use than iChat for video conferencing?

Please help I keep using iChat and it never works any more. What is better to use? Just name some so I can video conference. Thank you for your help

Hi,
Scroll this section fro items 5 through 12
http://www.ralphjohns.co.uk/page5.html#_other
Also this page http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html for APps in general.
9:51 PM Wednesday; January 27, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Trying to bypass CAC for Video Conferencing using EnableBWPolicyOverride

Scenario:
CAC enabled and bandwith policy defined for all company sites. Video bandwidth very restricted (250 Kbps).
VIP users were granted a Voice Policy with EnableBWPolicyOverride=TRUE (VIP users must bypass CAC).
Test:
P2P Video Calls between VIP users bypass CAC, allowing high video resolutions (Ok!).
Video Conferences between VIP users don't bypass CAC, limiting video to low resolution (NOT ok).
Is this expected, that Video Conferencing will not respect the EnableBWPolicyOverride=TRUE from the Voice Policy? (I know, it's a VOICE Policy and I'm tlaking about VIDEO. But remember, on P2P video call the bypass worked.
Any ideas?

Hi,
Bandwidth policy override enables administrators to override call admission control policy decisions for a particular user, however, the policy will be overridden only for incoming calls to the user and not for outgoing calls that are placed by
the user. So I think the policy does not apply to video conference.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How can we use K900 for video call over wifi or 3G

Do we have video calling feature like samsung provides over 3G or wifi? I dont see any option while dialing a number.
thanks

@vinashar,
I would recommend 3rd party apps such as Line or Skype for video calls ... As for future plans to implement video calls in the Lenovo dialer, I am not sure.
Thanks
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

How Do I Configure A WRT54G to Work With A Cisco 2800 Router

I'm helping my dad set up a new network. He has a Cisco 2800 series router that connects to the internet via two T1 lines. From this connection, he supplies internet service to his customers. The router was installed and configured with help from AT&T who monitors the router and advises my dad if there are problems.
The Cisco 2800 is not my reason for posting.
He wants to connect his home computers to the 2800. He has one desktop and two wireless laptops and wants to use a WRT54G to connect those computers to the 2800 router. How should he configure the WRT54G to connect to the 2800?
Thanks!

That's what I thought. So it is really no different than connecting the WRT to a DSL modem or cable modem as far as the setup goes. Good then.
Now, next question;
Would this network setup be correct?
Connect a 5-port switch to the 2800
Connect the WRT54G to the 5-port switch.
Configure the laptops to connect throught the WRT54G.
Connect the desktop (Ubuntu 9.10) to the 5-port switch via Ethernet cable (bypass the WRT54G).
Would there be IP conflicts or domain problems? I ask this because this is how his LAN is presently setup and he seems to be getting random connectivity problems on his Ubuntu desktop machine. One day it works fine. The next day it won't connect. Sometimes, even after he is connected, it stop works midstream. It also takes 10 minutes or so to boot up. The laptops always work without issue.
The two laptops would be issued IP addresses of 192.168.1.xxx but the desktop would be getting 12.83.xxxx.xx(something similar). The desktop's internet IP would receive its internet IP from the 2800 via DHCP just like the WRT54G is receiving its IP from the 2800. The two would essentially be on different LANs connected to the same router. Do you forsee any issues here?
Thanks!

Is it possible to use page-scope beans in value expression ?

Is it possible to use page-scope beans in value expressions ?
For example,
<c:forEach items="${DataScreens.records}" var="record" status="status">
<tr>
<td><h:command_link action="#{DataScreen.editRecord}">
                <h:output_text value="#{DataScreen.modifyLabel}" />
               
               <f:parameter name="id" value="#{status.count}" />
          </h:command>
</td>
<td>...</td>
<td>...</td>
</tr>
</c:forEach>In my case, I want to use JSTL instead of <h:dataTable>, because of some special
requirements in this screen. Can someone please provide me with a workaround ?
I get the following error on execution..
12/26/03 16:36:23:734 JST] 59f0302f FacesArraySuf W com.sun.faces.el.ext.FacesA
rraySuffix Attempt to apply the "." operator to a null value
[12/26/03 16:36:23:736 JST] 59f0302f FacesArraySuf W com.sun.faces.el.ext.FacesA
rraySuffix Attempt to apply the "." operator to a null value
[12/26/03 16:36:23:756 JST] 59f0302f WebGroup E SRVE0026E: [Servlet Error]-
[Argument Error: One or more parameters are null.]: javax.servlet.jsp.JspExcepti
on: Argument Error: One or more parameters are null.
at com.sun.faces.taglib.BaseComponentTag.doEndTag(BaseComponentTag.java:
961)
at com.sun.faces.taglib.html_basic.Command_LinkTag.doEndTag(Command_Link
Tag.java:222)
at org.apache.jsp._meisaiJoho._jspService(_meisaiJoho.java:365)
at com.ibm.ws.webcontainer.jsp.runtime.HttpJspBase.service(HttpJspBase.j
ava:89)
Thanks,
Ajay

Hello Ajay,
I cant really understand how a particular style can be applied to only an individual column.In the simplest case the attribut 'columnClasses' of data_table contains
the same number of style classes as you have columns in your table. These
classes are then applied one to one to the columns.
If there are fewer classes than columns then you can think of the classes
beeing repeated until there is one class for each column. In the extreme
case of only one class this means that this class is applied to all columns.
The following example shows the simplest case of three columns
and three classes. Just remove one or two classes from the columnClasses
attribute to see the 'repeating' behavior.
Wolfgang Oellinger
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core" %>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html" %>
<% session.setAttribute("PersonList", new foo.PersonList()); %>
<f:view>
<html>
<head>
    <title>Styled Data Table</title>
    <style>
     /* for the columns */
        .nameClass { width: 30em; color: red; }
        .birthdayClass { width: 12em; color: green; background-color: #ccc; }
        .heightClass { width: 5em; color: blue; }
     /* for the header */
        .yellowClass { background-color: yellow; }
    </style>
</head>
<body>
<h:form>
<h3>Styled Data Table</h3>
<h:data_table columnClasses="nameClass,
                               birthdayClass,
                               heightClass"
                        style="border: 1px solid black;"
                  headerClass="yellowClass"
                        value="#{PersonList.members}"
                          var="person">
    <h:column>
      <f:facet name="header"><h:output_text value="Name"/></f:facet>
      <h:output_text value="#{person.name}"/>
    </h:column>
    <h:column>
      <f:facet name="header"><h:output_text value="Birthday"/></f:facet>
      <h:output_text value="#{person.birthday}"/>
    </h:column>
    <h:column>
      <f:facet name="header"><h:output_text value="Height"/></f:facet>
      <h:output_text value="#{person.height}"/>
    </h:column>
</h:data_table>
</h:form>
</body>
</html>
</f:view>

Can't establish a Voice gateway (cisco 2911) using SIP with CUCM 9.1

I have configured a Cisco 2911 as a Voice Gateway using SIP (the configuration is attached), but unfortunately can't establish a test call to a phone (CUPC 8.6 SCCP) using csim start. I have done logging the ccsip debug and ccapi debug and attached them. Could anyone help me to solve this problem?

I just did some research on my end and csim is not supported for SIP. The Invite will never be created and sent to the CUCM to initate the call. It disconnects in the router itself with normal cause.
*Apr 18 08:58:48.086: //40/7D08458F8077/SIP/Error/sipSPIOutgoingCallSDP:
Could not create source SDP for Outgoing Call
*Apr 18 08:58:48.086: //40/7D08458F8077/SIP/Error/sipSPICreateOutboundSDP:
Error in creating an SDP for the outbound call - Check for supported codecs
*Apr 18 08:58:48.086: //40/7D08458F8077/SIP/Error/preprocessSetup:
Error during outbound SDP creation
*Apr 18 08:58:48.086: //40/7D08458F8077/SIP/Info/sipSPIInitiateDisconnect: Initiate call disconnect(16) for outgoing call
Please use an actual call to test your dial-peer and integration with call manager. csim will not work.
Hantale
Sree

HT201250 Is it possible to use Dropbox or Microsoft OneDrive as the backup disk for time machine?

I have a MacBook Pro for which I have not set up Time Machine. I have a Dropbox account and a Microsoft OneDrive account, each with plenty of space to serve as backups. Is it possible to use either of these as THE backup disk for Time Machine? It doesn't appear intuitive from Time Machine on my MBP.
Thank you.

No. Time Machine does not work with "cloud" drives.

HT5390 is it possible to use windows RDP (terminal services) to remote into an apple server?

is it possible to use windows RDP (terminal services) to remote into an apple server?

corydchurch wrote:
is it possible to use windows RDP (terminal services) to remote into an apple server?
In the Windows world you can use RDP to remotely control a (Windows) server for administration purposes. You can also use RDP to connect to a Windows Terminal Server to run user applications on the server and multiple users can do this at the same time.
It is not possible to use RDP to remotely control a Mac server for administration purposes. You can however use Screen Sharing or VNC (if enabled) or install some other software like TImbuktu Pro to allow the same sort of thing. None of these use the RDP protocol. If your are a mainly or all Mac environment you would use Screen Sharing (Apple's custom version of VNC). You can get Windows versions of VNC and Timbuktu Pro which would therefore allow a Windows machine to remote control the Mac server.
It is however possible to buy and install a Mac Terminal server solution to allow multiple users to connect and run applications on the Mac server just like a Windows Terminal Server solution except as it is running on a Mac server it will allow running Mac applications rather than Windows applications. This is not for remote controlling the server. There are two such packages for the Mac these being AquaConnect and iRAPP. These can run their own proprietary protocol or they can also allow users to connect via the RDP protocol. This does therefore allow a Mac or Windows user to connect to the Mac Terminal Server and run Mac applications.

Is it possible to use a Cisco 2800 IOS H323 voice gateway for video conferencing over ISDN?

Similar Messages

Maybe you are looking for