Is it possible to use a cRIO controller without the FPGA backplane?

Obviously, I'm talking about the modular units (cRIO9014 or 9025) and not the all-in-one models. If we have no IO/FPGA requirements for an application, can we just use the controller by itself? I realize this isn't the most optimum use of this hardware, but we are dealing with a requirement.
Thanks,
Chris
Solved!
Go to Solution.

Hi Chris,
yes, you can.
You're limited to the in/outs of the controller itself (USER switch, USER LED, LAN-Port, maybe RS232), but you can run the controller on it's own...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

Is it possible to use different iOS devices with the same account of the gamecenter?

Is it possible to use different iOS devices with the same account of the gamecenter? in that case, can two people play a game with the same account and add both scores to the same leaderboard nickname?

You should be able to use the same account. The top scores will get updated on the leader board.
Taz

Is it possible run a Wireless LAN controller without a WCS?

is it possible run a Wireless LAN controller without a WCS?
How Can I configure the Wireless Lan controller?
Thanks

Hi Alfred,
The WLC can be completly configured and operated without the WCS. The WCS is a nice addition for the management especially when running multiple WLC's but is not required.
Info on WLC (with Video);
http://www.cisco.com/en/US/products/ps6366/index.html
Info on the WCS;
http://www.cisco.com/en/US/products/ps6305/index.html
Hope this helps!
Rob

Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?

Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?

In Jabber for Windows 10.6, you can change the ring tones.

I want to use my wifi iPad for navigation but now realise it doesn't have gps built in. Is it possible to use hot spot to get the gps location to my iPad from my iphone? Long shot I know!

I want to use my wifi iPad for navigation but now realise it doesn't have gps built in. Is it possible to use hot spot to get the gps location to my iPad from my iphone? Long shot I know!

I thought yes, more like this on the right says no. Why not take the two devices outside and try.

Is it possible to use a USB aircard on the 11" MacBook?

Is it possible to use a USB aircard on the 11" MacBook Air?

No, the superdrive works only with Mac that don't have an optical superdrive built in in the first place.
However, if you have a newer Mac that could support the SuperDrive or another computer (Mac or PC) which has an optical drive, you could use this: DVD or CD sharing: Using Remote Disc - Apple Support

Is it possible to download photoshop only? Without the creative cloud app?

Is it possible to download photoshop only? Without the creative cloud app?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

Error message: 'Codec not found. You may be using a compression type without the corresponding hardware card' - then - 'Error. Out of memory'

Hi all. This is a new error I've never seen before.
It's stopping me doing anything at all really.
As soon as I start up FCP and click on a sequence I get this message: 'Codec not found. You may be using a compression type without the corresponding hardware card.'
Then I click on OK and it says 'Error - Out of memory.'
I've heard rumours that it could be the fact I'm using a strange type of JPEG, but it still happens with PNGs.
I've made sure my scratch disks are all going to the right place. I also have 100gb of free space.
The version of FCP I'm using is 6.0.5. I'm using an iMac with OSX 10.4.11 (yes, I know it's old!) and I've downloaded the latest version of Quicktime.
Help, anyone? I have an assignment due in tomorrow.
Many thanks...

p.s. having looked at other posts, perhaps I am missing some (or all) of the relevant codecs?
In the folder Macintosh HD > Library > Quicktime
there is basically nothing. Do you think this is the problem?
If so, where do I download FCP codecs from?
Many thanks..

How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

I have a full screen and cannot see my bookmarks.
How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

View > Sidebar > Bookmarks (Ctrl+B)
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

Is it possible to create a control file without the datafiles

Hi All,
Is it possible to create a control file without the datafiles?
on any OS or DB version
regards,
sachin

if I understand properly:
- you have a script to recreate the controlfile
- you have all of your database files backed up except your controlfiles
This should work as this is how we sometimes refresh dev databases:
1) restore the copies of the database files
2) recreate the controlfile
3) recover the database files to the desired point in time (if hot backup or archivelogs are available, otherwise, it would be as of the time of the backup)
4) add temp files to temporary tablespace(s)
The simpler solution would be to backup your controlfile at the same time as your datafiles (RMAN or o/s copy).
I hope I understood your question properly.

Can you add an external DVR if your using a Verizon box without the DVR built in.

Can you add an external DVR if your using a Verizon box without the DVR built in?
Or you can only add an external DVR ir you Verizon box has the DVR build in?
Thanks

You can connect an external DVR to the verizon equipment, but it will be limited as far as what it can do. You will not have the full functionality as you would by using a Verizon DVR. To get more information as far as what will and will not work, please contact the tech support group of the external DVR company.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Use a Zen Micro without the batt

hello, i would like to know if there is any way to use a zen micro without the battery inserted via usb cable, because i have a 6gb micro that i don't use, the battery died, and i would like to connect it to my amplifier, but all the micros i have came without the power adapter,wich would work. My computer's motherboard suplies power trhough usb even when the pc is off, so i woudn't even had to turn it on to hear music, but, unfortunely, micro's don't work without battery when plugged to the usb cord, right?. i like to know if i can tweak something in the micro to do this...please help me...

It remembers as long as it has power. This kind of thing has been discussed before, but not in this situation, but it's still the same....
If you unplug your Micro before it's gone into it's deep sleep slumber mode, then it will forget, and start back from it's LAST deep sleep mode. However, if you let it go into the deep sleep mode, then you can unplug it, and put your battery into it, and it will be at the same point it was when you just turned it off.
(by the way, not to thread jack, but this is my 50st post. Wow).

Is it possible to use an external controller, such as the Digi002?

I use a Digi002 (mixer/transport controller) with ProTools. Is it possible to use FinalCutPro X with the same contoller? If so, how do I set it up?
thanks,
Geoff

gmrsamson wrote:
I use a Digi002 (mixer/transport controller) with ProTools. Is it possible to use FinalCutPro X with the same contoller? If so, how do I set it up?
thanks,
Geoff
Geoff,
I believe the Digi stuff is proprietary. Digi won't let the Transport/Mixer work with any other DAW system including Apple's Logic Pro so I doubt if it's going to work with FCPX.
Digi does have an audio driver that allows the 002 to be used as a simple MIDI/Audio OSX but that's about it.
pancenter-

Is it possible to use a cRIO controller without the FPGA backplane?

Similar Messages

Maybe you are looking for