Is it possible to use a file from CS6 in CS5.5

I'm hoping to buy CS6 but I use CS5.5 at college. Is it possible to bring a file from CS6 into CS5.5. If not, where can I get CS5.5?

PS files are backward compatible if you save them with maximum compatibility enabled. likewise, AI files can be saved back to older versions. Of course in both cases specific features from CS6 will be lost or rasterized to pixels, so they are not editable in CS5.5. In Design might be a bit more tricky. It supports saving back to CS5.5, but this may completely ruin your documents, if you use the new dynamic layout features, Arabic text etc., so it's less useful to go that route.
Mylenium

Similar Messages

Is it possible to use backup files previously copied to an external hard drive to backup an iPhone?

My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?

Garageband can't use VST plugins.
If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.

HT201250 Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

How to use .mod files from a JVC camcorder?

Hi All,
I'm trying to find the proper workflow for using .mod files from a JVC Everio model camcorder. I was able to transfer the files onto my system by simply using the included usb cable from the unit. It simply mounted the camera's flash card on my desktop and I was able to drag all of the files from it.
As others have posted, the .mod files are not accessible using the Import function in FCP. I am able to open them with MPEGStreamClip as other have suggested. My question is, how should the files be converted to use with FCP and/or DVDSP? In MPEGStreamclip the file shows the video stream as: 224 MPEG-2, 720 × 480, 16:9, 29.97 fps, 8.40 Mbps, upper field first. I tried a few of the demux functions. The straight demux to .m2v & .ac3 yields a file that opens in QT, but it shows up as a 640x480 file and is noticably squeezed. Using the demux unscaled yields a file that opens in QT as a 720x480 file and looks somewhat better. And using the demux to headed yields as file that opens in QT as 720x404 and presumably is the correct 16:9 ratio.
Trying to use those same files in DVDSP didn't get me very far. If I create a new HD project in DVDSP I can import the straight demuxed file and the headed file. The unscaled file won't import. If I add the imported files to tracks the straight demuxed one will play in the simulator but the headed one simply shows a green screen.
I'm hoping that since MPEGStreamclip can play the files, its just a question of figuring out the proper export/conversion settings. My end goal is to produce a dvd of the footage (not exactly sure if I should be using an HD project or a SD project set to letterbox). I also need to produce a web-ready version of the footage. I haven't tried this yet but I'm assuming that one of the QT exports from MPEGStreamclip will get this done correctly.
Hopefully someone has a workable solution for these files.
Thanks,
Chris

Hi all,
I looked further on this forum and found others that had the same problem. One suggested connecting the cam corder first, then start iMovie, then wait for a few minutes. I did this and it worked!!!!!
Problem solved.
Thanks.

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11?

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11? I allready tried to install camera raw 8.7.1 but it doesn't work.

Yes, I see:
Letzte Aktualisierung
16.04.2012
The link I gave is listed in the faqs of this forum.
Photoshop Elements FAQ List
mfG
Michel

Is it possible to recover deleted files from the Microsoft Word app for iPhone? I am desperate.

Is it possible to recover deleted files from the Microsoft Word app for iPhone? I am desperate.

From the Microsoft Word app they say "Access Word documents from OneDrive, Dropbox, iCloud, OneDrive for Business, or SharePoint" so it sounds like you can specify where they are saved. However, my guess would be that the default will be OneDrive.
To the OP: Have you tried logging into onedrive.live.com to see if you can see your letter there?

Is it possible to retrieve deleted files from the cloud i.e. contact list?

Is it possible to retrieve deleted files from the cloud i.e. contacts?

If you have an iCloud backup of an iOS device that was made while the contacts were still on it, you may be able to restore them from the backup by following this user tip from Winston Churchill: https://discussions.apple.com/docs/DOC-4841.

Is it possible to export a file from Organizer with the list of all the images in an album?

Is it possible to export a file from Organizer with a list of all the images in a certain album? In filling one of my albums I did not save my edited images to the same file... they are spread out a bit.... Now I want them to make a book with them (outside of Elements).

As far as I know, Elements does not have the ability to create lists.
The solution to your problem of making a book outside of Elements is to place all the desired photos in an Album and then select File->Export->As New Files which gives you the ability to make a copy of every photo in the album in a new folder, from which you would create your photobook.

Is it possible to drop animated files from edge cc into premier pro cc ?

is it possible to drop animated files from edge cc into premier pro cc ?

Hi paddymaxg,
As far as I know, there is no such workflow.
Thanks,
Preran

Is it possible to dwnload a file from web with given URL into our local sap

Hi every Body!
Is it possible to download a file from web with given URL into local PC with abap.
thanks
vikram.c

hi
good
go through this link, i hope this ll help you solve your problem
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f5d3c40a-0801-0010-55b7-9e3b01745a40
thanks
mrutyun^

Is it possible to use .amr files in Logic Pro 9?

I have a .amr file. Is it possible to use in Logic Pro and if so how? If not is there a way to convert it?

"Is it possible to use .amr files in Logic Pro 9"
Probably, but it's a freakin' travesty!

Settings when using mp4 files from Samsung GS3

Hi,
Does anyone know the settings I should select when creating a New PE10 Project and using mp4 files from a Samsung Galaxy S3 mobile phone?
Thanks

Ms Spielberg
If you are using video files from the Samsung Galaxy S3, from what I have read, it offers 1080p up to 30, that being 1920 x 1080 @ 30 progressive frames per second. Is that correct? If so, please consider.
The project preset should match the properties of your source media. In setting the Premiere Elements 10 Windows project preset (new project dialog), the choice of one of the FIip project presets range from frames sizes 640 x 480 to 1280 x 720. So, they would not be a match.
Consequently, I would ask you to consider the project preset if your source media from this Samsung Galaxy S3 are as I have read 1080p30.
NTSC (or PAL as the case may be)
DSLR
1080p
DSLR 1080p30 or DSLR 1080p30 @ 29.97
In Premiere Elements 10 after you set the project preset, then you import your media with Get Media.
a. If you can connect your phone to the computer, you could explore Get Media/Flip/AVCHD/Cameras, Phones or Removable Drive as I think SG is suggesting.
or
b. If your phone files are saved to a hard drive location, then Get Media/Files and Folders.
Are you also asking for export suggestions?
Thanks.
ATR

Can I use mp3 files from different domain as the feed?

Hi..
I have just created a new podcast here:
http://artistsofliving.com/?feed=podcast
I would like to submit the podcast to iTunes sometime soon...
However, I'm wondering if they will reject it because the feed lives on 'artistsofliving.com', whereas I keep the media mp3 files on 'livinginthepresent.com'... a different domain.
I own the mp3 content and both domains- I'm splitting the media from the website for bandwidth reasons.
Is this ok? If this causes a rejection straight out is there a way to indicate that I own the material fairly?
Thanks!
-rich

There's no problem about using media files from any source: the feed just has to reference them (the URLs have to be 'absolute' - i.e. including the http:// and the server name - even if the file is on the same server as the feed anyway). I don't see the fact that some files have different URLs leading to accusations of copyright breach.

Is it possible to use a file refnum as an input of mathscript node

Hi everybody,
I just began to use LV and mathscript recently. One problem confused me a lot. That is,
Is it possible to use a file refnum as the input or output of mathscript node? A picture is attached for your reference.
Thanks a lot!
Gary
Solved!
Go to Solution.
Attachments:
Q-001.jpg ‏45 KB

What would you hope to do with the reference? The Mathscript node doesn't have a file reading capability. You need to read the file and pass the data into the Mathscript node.
EDIT: I stand corrected. You need to use the fopen and fclose functions inside of the MathScript node to be able to read a file inside of it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Call ggsci using batch file from windows- get error

i create a script to use ggsci, start manager, extract and replicat.
i have success doing this in my linux.
here is one of my script : start_ext1.sh
cd /u01/app/oracle/ggs
./ggsci <<EOF
start manager
start ext_s
exit
EOF
clear
i have an error when i do this using batch file from windows.
here is the batch file :
@echo off
cd C:\putty
plink.exe -ssh -2 -P 22 [email protected] -pw oracle "./start_ext1.sh"
every time i try to enter ggsci when i run that batch file, i get this error :
./ggsci: error while loading shared libraries: libnnz10.so: cannot open shared object file: No such file or directory
i didn't get this error when i run the script in linux.
is there anybody can help me?
thanks a lot!

problem solved!
add : . ./.bash_profile before enter ggsci.
it's worked! :)

Is it possible to use a file from CS6 in CS5.5

Similar Messages

Maybe you are looking for