Is it possible to use a file refnum as an input of mathscript node

Hi everybody,
I just began to use LV and mathscript recently. One problem confused me a lot. That is,
Is it possible to use a file refnum as the input or output of mathscript node? A picture is attached for your reference.
Thanks a lot!
Gary
Solved!
Go to Solution.
Attachments:
Q-001.jpg ‏45 KB

What would you hope to do with the reference? The Mathscript node doesn't have a file reading capability. You need to read the file and pass the data into the Mathscript node.
EDIT: I stand corrected. You need to use the fopen and fclose functions inside of the MathScript node to be able to read a file inside of it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Is it possible to use backup files previously copied to an external hard drive to backup an iPhone?

My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?

Garageband can't use VST plugins.
If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.

Is it possible to use .amr files in Logic Pro 9?

I have a .amr file. Is it possible to use in Logic Pro and if so how? If not is there a way to convert it?

"Is it possible to use .amr files in Logic Pro 9"
Probably, but it's a freakin' travesty!

Is it possible to use a file from CS6 in CS5.5

I'm hoping to buy CS6 but I use CS5.5 at college. Is it possible to bring a file from CS6 into CS5.5. If not, where can I get CS5.5?

PS files are backward compatible if you save them with maximum compatibility enabled. likewise, AI files can be saved back to older versions. Of course in both cases specific features from CS6 will be lost or rasterized to pixels, so they are not editable in CS5.5. In Design might be a bit more tricky. It supports saving back to CS5.5, but this may completely ruin your documents, if you use the new dynamic layout features, Arabic text etc., so it's less useful to go that route.
Mylenium

Is it possible to use JSF file as as error page.

I am using jsf file as an error page.It is working in fine in websphere. But if i am using that only the exception is raised it is not going to error page.
In Web.XML file,
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<error-page>
<error-code>403</error-code> <location>/faces/unauthorized.jsp</location>
</error-page>
jsf codings are placed under *.jsp files. In the time submitting form data to server a method throws NumberFormatException. This exception information is displayed in console. but blankpage is coming . It is not redirected to error.jsp fle which is under faces/error.jsp.
If i am directly giving /error.jsp then it is giving Faces context is not created error.
So i tried use simple jsp(pure jsp) file wihtin the folder and i set path like /pages/foo.jsp. It is working.
Tell me is it possible to use jsf as error page.

What would you hope to do with the reference? The Mathscript node doesn't have a file reading capability. You need to read the file and pass the data into the Mathscript node.
EDIT: I stand corrected. You need to use the fopen and fclose functions inside of the MathScript node to be able to read a file inside of it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Is it possible to use 3D files in layers?

I have few 3D files that I convered from STL to PDF. I would like to create a 1 page PDF where I have the 3D files in layer, and the customer should be able to disable layers, and in that way see the progress. Is it possible to do with Acrobat Professional? If yes, how can I do it exactly? I'm attaching 2 files (originally I would like to put 4 3D models in each PDF).
http://www.mediafire.com/?q2bi4fnz1i63p3f,iucaq8rh6cv4zra
Thank you

Either put all the meshes into the same U3D file, or load them as Resource objects using JavaScript. You can show/hide the parts and define a new view from the 3D toolbar, or use scripting to set the visibility of each node in the model (by searching for its name).
Doing it without scripting is the easier option, but assumes you can assemble your models into a single U3D file. Scripting the entire thing is more complex but allows you to work with whatever U3D files you already have - we'll have a tutorial on how to do it later this month, but if you're a total newcomer to Acrobat JS you'll probably need to hire an expert.

Is it possible to use psd files as the title files in Premiere(convert or other)?

I designed all of my credits in Photoshop, not thinking of course! I have roughly 50 credits and want to use the roll features inside of the titler in Premiere.

And, if you want to add different Styles, just create say the actor's names on one Text Layer, and the role on another Text Layer. You can easily Align Layers to each other, so there is no problem there.
You can also do several things at the character Level, but Layer Styles are not one of those. It will not be available, if on has Selected a character, or characters in a line of Text.
Good luck,
Hunt

ECATT - How use external file/new variant for input data

Good day,
I want to use an eCATT created by someone else for another request. I want to be able to specify my new input data based on the new request WITHOUT generating a new Transport. Same thing as I'm doing for the CATT ... the CATT is transported but only the input data change depending on the request without generating any transport.
How I build my new input file and how to use it? I tried to download my variant but the only possible format is XML and it's very hard to build a new file based on my request.
Thanks for your help.
Simon

Hi,
Can you tell me how you are generating the xml file. My guess is you are downloading the Test Script/ Test Configuration. In that case it creates an xml file.
As mentioned by Ajay, In Test Configurator / Test Data - you can create the internal variant first, i.e assuming you have already created parameters.. On the top, you have a download button "Download Variant". This creates a .txt file. You can open the file in excell and edit it.
For the next test, you can select external variant and give the modified file path name.
Let me know if this helps.
Regards
Phanidhar

Is it possible to use an IP camera as an input to Flash Media Live Encoder?

I am new to this forum so please pardon my ignorance....
I want to use my Sony IP camera (such as model SNC-RX550) as an input to the Flash Media Live Encoder, it that possible? If so, where would I go to get started please? Any help would be very much appreciated.
David

I would say NO. You would need a composit output from the camera to feed the video into the encoder. Since the IP camera doesn't do that it's not gonna work.

Is it possible to use Panasonic MTS file in premier pro cc?

I am looking to buy a Mac but not sure if it is possible to use the files from my Panasonic HC-X900M AVCHD in Premier Pro cc

Thank you, is that without converting? sorry should have said in my original question

Using dotx files opens the template file instead of instantiating a new docx file

When I save Word documents as templates (dotx) in a SharePoint document library I noticed that they always open up as the template file (dotx) and not as a new Word document (docx). I expect that this happens because SharePoint simply opens up
the document "as-is" - disregarding the logic which would normally create a docx document in offline mode. But strangely this works fine when opening the file in explorer view.
Does anyone know if it is possible to use dotx files as intended in SharePoint? Was this behavior introduced when SharePoint 2007 was launched or was it perhaps included with a CU or SP?

You can create a central hub containing content types (called the Content Type Hub). Timer jobs run throughout the day to copy content types from the Hub to other site collections. Once the content types have been replicated to your site collection
you would change your library settings to allow management of Content Types (Advanced in Library Settings). Now you can select "Add from Existing content types" (Library settings) and add the content types to your library. When you are
done you can train your users to create new documents from your standard templates by selecting the content type by clicking the tiny triangle under the New Document button.
Reference
About Content Types:
https://support.office.com/en-us/article/Introduction-to-content-types-and-content-type-publishing-e1277a2e-a1e8-4473-9126-91a0647766e5
I did this on an Intranet I setup. When I created a new Project Site (not on Project Server), I added the content types to the document library (e.g. Charter, Plan, Status Reports, Project Document). I then took an additional step and I deleted the default
"Document" content type. and moved "Project Document" to the top of the list. I then set the column "project name" (which I added to the project document content type) default value to the name of the project. This
way when people upload new docs to the library they are "Project Documents" and the Project Name column is populated with the name of the project by default. - I hope this is helpful - Greg
Gregory Frick

Using the file icon instead of the Thumbnail icon

is it possible to use the file icon instead of the thumbnail icon on the desktop? If so, how?
Thanks,
Travis

View menu --> Show view options --> Show Icon preview --> uncheck it

Is it possible to use a PDF just like a JSP?

Hi! My question is quite simple, I was wondering if it is possible to use PDF files as if they were html forms and post the data to a servlet with PDFBox? I read the spec and it seems that PDFBox is meant to treat local pdf files, am I right?
I guess what I will have to do is save the pdf file once the user has finished entering data in it with a unique file name, and then treat the local pdf file with PDFBox... Is that the way to go or is there an other way to use pdf forms just like an html forms and then treat the data in a servlet?
Thanks!

No, I think I've seen PDF forms which post to servers like web pages. I could be wrong, though. But that would probably require the full Adobe Acrobat to generate those.

Using a file as a table

Hi,
I know that it is possible to use a file (text file) as a table in 9i
I don't however know how to do it.
Does anyone know how to do this?
Thanks,
Ed.

Here's an example
##emp.txt##
1,JOE,MORGAN,55
2,LINDA,ROBBINS,19
3,MARTIN,DEMMS,43
create directory mydir as 'e:\oracle\admin\rman2\temp';
create table ext_emp
(empno number,
first varchar2(10),
last varchar2(10),
age number)
organization external
(type oracle_loader
default directory mydir
access parameters
(records delimited by newline
fields terminated by ','
location ('emp.txt')
reject limit unlimited
/

Use file as sql*plus input

Can I use a file as sql*plus input?
I have a query like below:
select * from employees
where deptno = &1
and job = &2
It will prompt me for the values of course.
I can execute it at the command line like below:
sql>@script.sql 10 salesrep
Is is possible to put the values in a file and call the script like below:
sql>@script.sql <filename>
Then this file could be in a directory in the OS and I can add any values to it.
thanks.

Hi,
The following script reads a 1-line file and puts its contents into the substitution variable &file_contents:
COLUMN     file_contents_col   NEW_VALUE file_contents
SELECT     TRANSLATE ( '
@&1
            , 'A' || CHR (10) || CHR (13)
            , 'A'
            )     AS file_contents_col
FROM    dual;So, if my_params.txt contains
10    salesrepthen you can say:
@read_file my_params.txt
@script.sql   &file_contentsYou can generalize this by putting the two lines above into a file called caswf.sql:
@read_file &2
@&1 &file_contentsand call it like this
@caswf script.sql my_params.txt"Caswf" is a Welsh word that means "call any script with file".

Is it possible to use a file refnum as an input of mathscript node

Similar Messages

Maybe you are looking for