Is it possible to use a smaller configuration

Hi everybody,
I am new to OpenSparc community. I want to make a project which is using OpenSparc core, but there is one thing that I want to make sure. It is about which FPGA to choose to implement the core.
First of all I checked the website http://fpga.sunsource.net/ and see that XC4VLX200 and XC4VFX100 FPGA models from Xilinx are given as appropriate devices for implementation. But when I checked the prices of those FPGA devices I came up with disappointing results, because they are more than thousands dollars.
So here is my question, is it possible to configure OpenSparc to a minimal version(for example by disabling some functions) and implement it into a cheaper FGPA?
Thank you.

There are options to the OpenSPARC T1 core to make is smaller. See the OpenSPARC T1 Design and Verification Guide for more details. We have successfully implemented a core on the XC4VFX60.
In addition, you should check out the OpenSPARC Kit. This is an ML505 FPGA board with an XC5VLX110T FPGA on it. It's available from http://www.digilentinc.com/ for $750 for Universities. ($2000 for commercial use). This is a complete FPGA board with everything you need to implement an OpenSPARC T1 core.
formalGuy

Similar Messages

  • HT1420 Possibility to use 1 Computer - configured with 2 user accounts - each account uses a different Apple-ID for iTunes authorization ?

    I wonder if it is possible to use 1 Computer (Macbook Pro)
    - configured with 2 (ore even more) user accounts (i.e. me + my kid)
    - and each user account has a different Apple-ID (account) for iTunes purchases & iTunes authorization ?
    I woud think that is fine in terms of the underlying license agreement refereing to re-download purchased movies, shows, apps, etc.
    However, it seams that there is that miraculous 90 days restriction, which I don't understand, and which allows me only to "authorise" the Computer under one or the other account. The switch is unfortunatelly only possible every 90 days ?!?
    Thanks anybody for help
    Oliver

    The 90 day association doesn't stop you authorising an account, it only stops you from using another account for iTunes Match or automatic downloads or redownloading its past purchases : http://support.apple.com/kb/HT4627
    There are a few methods listed on this page for how you could do it e.g. multiple user acounts, same iTunes but you having separate playlists, separate iTunes libraries : http://support.apple.com/kb/HT1495

  • Is it possible to use run-time configuration in conjunction with Session Manager?

    I'm trying to avoid using MAX, basically because it's a pain for users to configure MAX when the application already knows what the configuration is. I actually get the configuration from a database, but that's another story. I've experimented with run-time configuration (see page 4-31 of the 'IVI Driver Toolset' manual) and it works fine. However, when I try to use this in conjunction with Session Manager, session manager complains that my logical name is not a driver session name. I suspect that Session Manager is looking up logical names from a different source, therefore run-time configuration won't work. Any suggestions? I've attached the files I'm working with.
    Attachments:
    SessionMgrTrial.zip ‏41 KB

    Hello Mark:
    The Session Manager GetLogicalNames method does not distiguish between logical names and virtual instrument names. A user of the method cannot ask for just logical names or just virtual instrument names. Right now you always get both. The new function is called InstrSessionMgr.GetNames. Notice that the online help file says Boolean for the flags parameter when it is an enum.
    Hope this helps. If you have any further queries, please let us know.
    -NI support
    National Instruments - Software IS the instrument!
    Attachments:
    help.gif ‏22 KB

  • Is it possible to use a small cd in the optical drive slot of an iMac?

    I'm trying to install RescuePro on my Mac, but I'm afraid the small cd will get stuck inside. I tried copying it onto a regular cd-rw using a Windows based pc, but it came up as a ".INK " file on my Mac and I couldn't open it. Help!

    Hi jeris529,
    As Niel has suggested, you should not use a non standard disk in your slot loading iMac.
    Further information about disk compatibility or usage can be found in the Apple Knowledge Base Article "Using nonstandard discs in optical drives".
    hope that helps some,
    littleshoulders

  • Can Time Capsule be used as a time machine on a Windows Server.  Is this possible, and how do i configure this?

    I like to use the new TC in my office as a time machine on a Windows Server.  Is this possible, and how do i configure this?
    In fact my plan is to make the first back up by connecting to the server via an ethernet cable, but thereafter i like to bring the TC to my home and perform the incremental backups over the internet.  This is for safety reasons, in case for example the office is broken into, or flooded, or fire (god forbid).
    I sincerely hope it is possible, and not complicated.
    Alternatively i would not mind replacing our current Windows server 2003 with an Apple server, but all computers in the network (except mine) are Windows 7 or 8. Would it work?
    Thanks in advance.
    Paris

    I will consider the WD My Cloud device.
    It is a NAS.. it is designed to provide a cheap centralised file storage.
    What is NAS?? http://en.wikipedia.org/wiki/Network-attached_storage
    A file server like windows uses heaps of power to do very little.. in your setup.. In most setups like SBS it will do exchange server and provide a heap of useful connectivity to your clients.
    Since you are not using the windows server in anything but simple file serving you can replace with a NAS..
    Problem with the TC is, it is a router with a hard disk inside.. designed specifically for Time Machine.. it fails to provide what a NAS does.. easy access to any clients, local or remote.. TC is designed by apple for apple and the rest of world is not really invited to the party.
    It provides no backup.. no data protection.. and is so specifically apple orientated I do not think it works at all well with windows.
    For a simple example.. windows will have file issues with large files.. because it is only NTserver FAT32 to windows.. bad luck if you have large files.. !!
    Plainly if you use active directory in windows that facility is gone.
    I just like Apple products, find them more stable than Windows and easier to use.  Plus i can access the server from home if it is an Apple Server.
    If you only need remote access for yourself that is fine.. too bad for the windows clients I guess.
    Or you open it up to the world and bad luck for security.
    Apple do not design for mixed environment.. in fact with the TC there is no provision for windows access officially at all.. so anything you do is a fudge.
    You can use the TC for your Mac backups within the network.. that is fine. Apple provide no software at all to help with your windows clients.

  • Is it possible to use variant configuration (with a Non-SAP solution) when creating ERP sales orders in SAP CRM WebUI

    Hello,
    our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
    ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
    Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
    Thanks in advance.
    Regards,
    AEV

    Dear AEV,
    I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
    Best regards
    Rene

  • Is it possible to use Apple Configurator to do a remote wipe of an iPad? Or must I use the profile manager tool within OS X Server?

    Is it possible to use Apple Configurator to do a remote wipe of an iPad? Or must I use the profile manager tool within OS X Server?

    no apple configurator connects via usb
    you'll need a MDM solution such as OSX server profile manager for remote wipe
    OTA pushing profies remote wipe etc
    you could use icloud for remote wipe

  • Is it possible to use jdbcappender with jboss's logger?

    Hi
    Is it possible to use JDBCAppender with org.jboss.logging.Logger instead of org.apache.log4j.Logger? secondly can i also use jboss.logging.logger to send my logs to the database (not manually, using configuration file as with apache.log4j) ?
    TIA.

    Back in my days, when you were new to Java, you wrote all sorts of stupid console programs and crapplets to get the hang of it.
    Anyway, without seeing JBoss' logging framework, I'm gonna say "no, you can't" unless they've actually bothered to make it compatible with commons-logging (or was that log4j). However, you probably could write your own JDBCAppender for their framework or at least a small adapter that would forward the logging requests to log4j.

  • Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

    I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
    Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
    in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
    So, a typical Lync deployment looks like this:
           Internal users
                     |
                   443
                      |
              Internal LB
            192.168.0.20
            443         443
              |               |
       Lync FE 1     Lync FE 2
    192.168.0.21 192.168.0.22
              |               |
          4443        4443
              External LB
           Public IP Address
                     |
                  443
                     |
           External Users
    This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
    is the keyword here.
    After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
    adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
    Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
    For reference, my commands are:
    Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
    (This completes successfully)
    Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
    (This fails)
    The existing external endpoint is configured as such:
    Get-AzureVM LYNCFE1 | get-azureendpoint
    LBSetName : HttpsExtLB
    LocalPort : 4443
    Name : HTTPS-Ext
    Port : 443
    Protocol : tcp
    Vip :
    ProbePath :
    ProbePort : 4443
    ProbeProtocol : tcp
    ProbeIntervalInSeconds : 15
    ProbeTimeoutInSeconds : 31
    EnableDirectServerReturn : False
    Acl : {}
    InternalLoadBalancerName :
    IdleTimeoutInMinutes :
    LoadBalancerDistribution :
    The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
    shouldn't be any conflict here... however it looks like there is one instead.
    Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

    Hello Massimo Pascucci,
    The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
    known as the Internal load balanced IP) per cloud service.
    There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
    You can leave your feedback by following the link below:
    https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
    Refer to this article for more information on Internal load balancer:
    http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
    Thanks,
    Syed Irfan Hussain

  • I have 2 iMacs, one has a thunderbolt port and the other has a mini display port. Would it be possible to use one as an extension of the other? If so what cable would I need.

    Hi,
    As the title of the thread says. I have an older iMac with a mini display port and a newer iMac with a thunderbolt port. Would it be possible so that the older iMac is an extension of my new iMac. The reason for this is because logic x can be a abit clustered on one screen.
    Thanks

    If you'll be using the 2010 iMac as the display, a Mini DisplayPort to Mini DisplayPort cable.
    It's not possible to use the 2011 iMac as the display through Target Display mode in that configuration.
    (126322)

  • Is it possible to use Adobe Illustrator in multiple computers with the same account?

    Hi guys,
    So our company is a small designing tile company,
    we wanted to purchase the Adobe Illustrator and was wondering if it was possible to use it in multiple computers with one account, as we have two computers that are frequently use for designing, or do we have to buy two separated Adobes Illustrators for each computer?
    Thanks

    From the End User License Agreement (EULA):
    2.1.3 Portable or Home Computer Use. Subject to the restrictions set forth in Section 2.1.4, the primary user of the Computer on which the Software is installed under Section 2.1 (“Primary User”) may install a second copy of the Software for his or her exclusive use on either a portable Computer or a Computer located at his or her home, provided that the Software on the portable or home Computer is not used at the same time as the Software on the primary Computer.
    So, while it CAN be installed on more than one computer, they may not both be in use at the same time.
    --OB

  • Is it possible to use SCCP and SIP at the same time?

    Our CCM is using v9.1 and all of our phones are SCCP. We are looking at a conference room phone that runs SIP. Would it be possible to use this in our current setup?

    Hi @bobdchambers,
    That's totally fine. They both co-exist in the same environment but make sure to not configure the same extension in different models because if you dial an extension that is configured in a SCCP phone and a SIP phone, just the SCCP phone rings.
    HTH.
    Rgrds,
    Martin, IT Specialist

  • Is it possible to use a USB hub on a new MacBook Pro with Maverickss?

    I have used a powered Q-Store USB2 hub on first my old trust MacBook with the 13 inch screen running System X.6.8 for years; then I switched it over to my new 13 In. MacBook Pro (non retina) with Mavericks X.9.2 and it still works great. It is powered and seems to run a full load including USB hard drives, camera when wanted, cooling pad with fan, printer/scanner/copier combo, charging a MP3 player or Galaxy S4, apple mouse and keyboard, all with no trouble and no drop outs. I let an old Firewire 400 or 800 hard disk stay with my old Macintosh for now as it mirrors it, but sometimes hook it up with no problem except it gets hot.
    I have a new USB3  WD Passport 3 hard drive and a 32 gb USB 3 memory stick. I wanted to put these on a USB3 hub and use one of the ports for the faster items. I can run either my WD My Passport 3 Gb drive that I use to mirror my internal drive as long as it is alone. I can also plug a 32 gb A Data memory stick in fine alone except things get a bit snug, and there's no more room on the USB 2 hub for the memory stick. If I do not use a hub for the one port I have to either use the Hard Drive or the memory stick, not both. I was using the memory stick to port files back and forth between my old and new computers at least for a while. The USB 3 peripherals work reliably when plugged in alone, but the moment a hub gets in the picture even if only one item is plugged into it, things drop in and out. It does not matter if it is the powered USB 3 hub or the non-powered Anker USB 3 4 port hub. The USB 2 items simply work but the USB 3 ones only work alone. I have looked at the power specifications. It seems like one hard drive uses all of the power the hub can put out.
    It looks like the USB 3 is rather limited on Macintosh computers is all I can conclude. There may be extra speed, but what good is it if you can only run one peripheral at a time? It seems like even a hub stresses it unless it is a hub and a memory stick or two. I even changed to system settings to keep my hard drives from going to sleep, but still it drops out randomly if hooked to a hub and runs perfectly when plugged in directly. I had hoped to use it for an emergency start up disk if needed, though I must say the rather incredible StoreEdge Micro SDX card works great for that purpose and seems to belong.
    That old USB 2 hub, even with a smaller one plugged in with 2 portable hard drives still works flawlessly on the other port and never drops out.
    I have not tested the Firewire 800 port long enough to decide, except it gets hot if it reads very long.. The old Firewire 800 / USB 2 hard disk has more than one port on it unlike so many today. I had to use a Firewire 800 to 400 cable for my old computer. Anyway it works in either computer and stays mounted even when asleep.
    Is it possible to use a USB 3 hub with more than one peripheral on a 2012-2013 13 inch MacBook Pro computer with Mavericks? If so which one works? It cannot be good for hard disks to randomly disconnect and reconnect without being dragged to the trash.

    no you can't - you have to upgrade it to 16GB yourself.
    you can get your RAM from newegg.com, macsales.com.
    the RAM you need is 16GB (8GBX2) DDR3 1600MHz DDR3.
    upgrading the RAM yourself will not void your warranty.
    you need a #00 Phillips Screwdriver - 10 screws at the bottom - 7 long ones and 3 short ones - just remember where they go when you put the screws back in.
    a simple 10 minute job.

  • Is it possible to use BAPI-ALE to send an idoc using the message control?

    Hi Guys
    Is it possible to use BAPi-ALE to send an IDOC using a message control?
    I have configured the system to send an IDOC when a outbound delivery is saved in the system.
    I have done the following.
    1). I am using the std BAPI-ALE interface provided by the object type LIKP.
    2). I am using the method SAVEREPLICA for which an interface already exists in BDBG transaction.
    3). I hace created a distribution model in BD64 and added the BAPI - LIKP and SAVEREPLICA
    4). Created a partner profile ( using the generate partner profile option in the BD64 transaction )
    QUESTION:
    1). How do i associate the custom OUTPUT type created for Delivery ?
    2). I tried to associate the custom output type in the Partner profile definition under the message control tab but i am not sure which Process code to be used? Since the partner profile was generated automatically from BD64 it has an entry for SHP_OBDLV_SAVE_REPLICA as a message type in the outbound parameters. and i am unable to find a process code for this Message type in WE41. So what process code should i use in the Message control tab against the custom output type?
    3). Do i need to leave the message control tab empty without making any entry? If yes then how would the system come to know that it needs to trigger this partner profile when the custom output type is proposed by the system?
    will award points for useful answers
    Edited by: Workflow  learner on May 29, 2008 8:49 PM

    "any way"
    Applications such as ScreenRecycler, http://www.screenrecycler.com/ScreenRecycler.html, can do it.

  • How to use the Dynamic Configuration Bean

    Hi experts,
    im currently doing a file to mail scenario.
    i want the name of the input file as the subject of the mail.
    i want to establish this using the Dynamic Configuration bean
    my first question is:
    key.1 <b>read</b> http://sap.com/xi/XI/System/Mail THeaderSUBJECT
    value.1 message.messageID
    this reads the value of the message ID into the attribute THeaderSUBJECT
    but what does this do?
    key.1 <b>write</b> http://sap.com/xi/XI/System/Mail THeaderSUBJECT
    value.1 message.messageID
    when i use this it has no effect atall.
    my second question.
    I have my input filename in the FileName attribute in Dynamic configuration how can i read it into THeaderSUBJECT attribute.
    Appreciate any suggestions.

    Hi Satish,
    Yep i know its possible via an udf in Message mapping but i dont have an MM in my scenario. Since im not parsing thru the input data since its an excel file, so im transferring the file using the following method
    /people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
    and in this method if i include an MM it will give me a mapping exception.
    So i have to use this bean somehow and try to accomplish what we do in the udf.

Maybe you are looking for