Is it possible to use a WVC80N on Virgin Mobiles Mifi2000 Hotspot?

Anyone know if it is possible to use a WVC80N on Virgin Mobiles Mifi2000 Hotspot? I live out in the country and the only network connection we have is via the Mifi2000 3G portable Wifi Hotspot.
So far I have not had any luck setting this up, mainly due to the fact that I can have one device talk to another device locally across the hotspot, so all setup would have to be done on a dummy / closed network. I tried this but wasn't successful in getting it to accept the Mifi2000 wireless access point. It saw it and recongnized that it had WPA but after entering the key and complelying what i thought was the last step of the wireless config, it just fails to connect.
Of course, the mifi2000 also automatically passes out dynamic ips, so i have to use a DDNS service...but can't get that far.
Anyone know?
-Cox

How many computers do you have in the network?
What is the IP address and default gateway number on your computer?
In order to connect to the wireless network, WVC80N should get valid IP address from the access point.
If the access point has capacity to assign a private IP address to the computers and devices then I think you can use WVC80N.

Similar Messages

Is it possible to use apple tv with my mobile 3g internet connection

is it possible to use apple tv with my iphone 4s mobile 3g internet connection?

This has already been discussed here:
https://discussions.apple.com/thread/4819472?start=0&tstart=0

I'm considering buying and iPad. Instead of purchasing WiFi and Cellular can I just purchase WiFi and use my iPhone 4 and a personal hotspot

I'm considering buying an iPad with WiFi only. is it possible to use my iPhone 4 as a personal hotspot to access cellular on the iPad.

yes, you sure can highminus.

I am now stuck with an iphone 4 can i use it for virgin mobile?

i had sprint for a while, when i got the Iphone for sprint my service became horrid and i decided to just swich over to a different company, now the company that i have is also awful and i am considering switching over to virgin mobile and i now see that they have the IPhone. can i use my IPhone with Virgin Mobile even if it is a sprint iphone? the ESN is clean and all.

Contact Sprint to find out if they will unlock it for use on other carriers.
If they will unlock the CDMA side (unlikely), contact Virgin and ask if they will allow the device on their network, again unlikely.

Is it possible to use wildcards to match cell contents in an if statement?

I need to return a ID along with some other information on a page by page basis, so that the information comes out linked by position. I use a couple of loops and if statements to navigate through the document. I am able to use exact matches of cell contents which is fine when the contents doesn't vary. But the IDs, though they have a similar pattern, are all different. In a menu driven search, I am able to find what I need with '150^9^9^9^9^9-^9^9^9' But when I try putting this (or any number of [0-9], *, ? combinations) it fails. Is it possible to use wildcards? The symbol used for the match (==) makes me suspect that it is not possible and that only literal, exact matches will work. But I wanted to check with the experts before giving up.
Thanks
pcbaz

Thanks for the input. You're right, a GREP search is much more efficient. But what I'm trying to do and the circumstances here don't allow me, I think, to go that route. I am trying to generate a list of values coming from several textframes on a single page and have them come out so that I can tell which values belong together.
I'm using an inherited document with masters that were created 'manually'; the index numbering for textframes and tables is random. I navigate through the pages, looping through textframe indices asking ' does this textframe exist?' If so, I ask if it is a table -- if no, it is a simple textframe and I ask about the ID, if yes, I ask if the contents of cell (0,0) (invariant position and contents) are equal to the table I want.. I am sending the ID and other pieces of information from the table to one row of a new table on a new page. So the ID and other information from a single page are linked by being in the same row.
I know this a little 'off-normal' -- I'm using the search to navigate through the document and find things by location the way you do with a spreadsheet. I have devised a work-around that helps me get around the fact that the ID is not invariant. I create a list of the (exact) IDs from another document, equating them to a variable ('a'). I then loop through the list of IDs and ask if the contents of the textframe is equal to 'a'..This works o.k, unless there happens to be an extra space, a different kind of hyphen, etc. It would be so much easier if I could use the wildcards that work in a menu-driven text or GREP search in script just to ask about the contents of the textframe.
Thanks again
pcbaz (Peter BIerly)
P.S. we have since rewritten the masters so this problem will not exist in the future -- we now know exactly which textframe and/or table indices to refer to to get any particular bits of information and don't need to ask questions about the contents.

Is it possible to use a cable with two headphone jacks on either end and an electric guitar adapter to record in Garageband?

Hey everyone,
I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air).
I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
I can't do that. I tried.
Please help!
Thank you.

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

iCloud requires OS X 10.7.2.

Is it possible to use my ipad 4 as a second monitor through a USB connection.

Is it possible to use my ipad 4 as a second monitor through a USB connection.

perhaps, but my information was current. I had the same question and was looking for and answer and found it. So I responded in order to help others who found this question and were looking for an answer. This community is made more helpful and kept current by adding new answers with current information.
imobl... air display was a valid response for 2011 predating the question. Also using Monitor2go was valid in 2012. There were USB mirroring and as a 2nd display for an iPad options at the time the original question was asked.

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop? Would like to use larger screen when working at home. I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work. When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer. What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible? Any assistance would be appreciated.

quax88 wrote:
11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
When possibly infected e-mail files are found:
Right-click/Control-click on either the infection or file name in the ClamXav window.
Select "Reveal In Finder" from the pop-up menu.
When the window opens, double-click on the file to open the message in your e-mail client application.
Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

Is it possible to use backup files previously copied to an external hard drive to backup an iPhone?

My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?

Garageband can't use VST plugins.
If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.

Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
So, a typical Lync deployment looks like this:
       Internal users
               |
               443
                  |
          Internal LB
        192.168.0.20
        443         443
          |               |
   Lync FE 1     Lync FE 2
192.168.0.21 192.168.0.22
          |               |
      4443        4443
          External LB
       Public IP Address
                 |
              443
                 |
       External Users
This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
is the keyword here.
After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
For reference, my commands are:
Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
(This completes successfully)
Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
(This fails)
The existing external endpoint is configured as such:
Get-AzureVM LYNCFE1 | get-azureendpoint
LBSetName : HttpsExtLB
LocalPort : 4443
Name : HTTPS-Ext
Port : 443
Protocol : tcp
Vip :
ProbePath :
ProbePort : 4443
ProbeProtocol : tcp
ProbeIntervalInSeconds : 15
ProbeTimeoutInSeconds : 31
EnableDirectServerReturn : False
Acl : {}
InternalLoadBalancerName :
IdleTimeoutInMinutes :
LoadBalancerDistribution :
The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
shouldn't be any conflict here... however it looks like there is one instead.
Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

Is it possible to use my music files in both my girlfriend's and my separate Itunes libraries through our seperate user accounts?? I want to import my music into her library with out copying the files onto my hard drive a second time....

Is it possible to use my music files in both my girlfriend's and my Itunes library's through our seperate user account? I want to import my music into her library without copying to my hard drive a second time.....

Would any of these help you?:
http://www.apple.com/itunes/inside-itunes/2011/05/two-ways-to-share-media-librar ies-through-itunes.html
http://www.apple.com/itunes/inside-itunes/2011/01/keeping-multiple-itunes-librar ies-on-a-single-computerif-you-share-your-computer-with-others-and-you.html

HT1420 Possibility to use 1 Computer - configured with 2 user accounts - each account uses a different Apple-ID for iTunes authorization ?

I wonder if it is possible to use 1 Computer (Macbook Pro)
- configured with 2 (ore even more) user accounts (i.e. me + my kid)
- and each user account has a different Apple-ID (account) for iTunes purchases & iTunes authorization ?
I woud think that is fine in terms of the underlying license agreement refereing to re-download purchased movies, shows, apps, etc.
However, it seams that there is that miraculous 90 days restriction, which I don't understand, and which allows me only to "authorise" the Computer under one or the other account. The switch is unfortunatelly only possible every 90 days ?!?
Thanks anybody for help
Oliver

The 90 day association doesn't stop you authorising an account, it only stops you from using another account for iTunes Match or automatic downloads or redownloading its past purchases : http://support.apple.com/kb/HT4627
There are a few methods listed on this page for how you could do it e.g. multiple user acounts, same iTunes but you having separate playlists, separate iTunes libraries : http://support.apple.com/kb/HT1495

Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina?

Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina? E.g. Using a mini-display cable to connect from the imac mini display port to thunderbolt port on my macbook.

Apple shows only the 27" version supporting Target Display Mode.
<http://support.apple.com/kb/HT3924>

Is it possible to use creative cloud online with both Mac/windows system (on the same computer, bootcamp) without paying twice ?

Hello, I work with a Macbook pro, divided into mac and win 8 (with Bootcamp), is it possible to use Creative Cloud subscription with both system without paying twice.
Bonjour, J'utilise un Macbook pro partitionné Bootcamp mac et windows 8, est-il possible que l'abonnement à Creative Cloud en ligne fonctionne indifféremment dans les deux systemes (sur le même ordi), sans payer deux fois.
Merci,
jho

Your subscription allows for two functioning installations (normally on separate machines, but I imagine you could install the two as you indicate).

Is it possible to use a WVC80N on Virgin Mobiles Mifi2000 Hotspot?

Similar Messages

Maybe you are looking for