Is it possible to use AAE in Enterprise Service to File Scenario?

Hi, Gurus,
I distribute master data asynchronously from SAP ERP to other application within an A2A scenario using Enterprise Services.
In PI i get XML messages directly, then mapping, converting them into files and put them in a foler via ftp communication channel. I have tried to use AAE (Advanced Adapter Engine) in this scario to improve performance. but without Sender communication channel it does not work.
Does anyone have experiences to share?
Thanks and Regards
Rene

Hi Rene,
If you want to use AAE (ICO object) for SAP ERP to File scenario then you should use SOAP adapter at the sender side in XI protocol mode. This SOAP adapter with XI protocol mode will act as ABAP XI adapter adn will get content from SAP ERP and forwards it File receiver adapter. In SDN there are several blog and links which talks abot SOAP adapter in XI Protocol mode to connect to SAP back-end through AAE.
Please let me know if you need any link for these if you didnt find it.
Thanks,
RK

Similar Messages

Is it possible to use all the render service in a single process?

is it possible to use all the render service in a single process?, my requirement is to start the process by email or by workspace and the form shud be available in both pdf and html form for the users.Please suggest a way to implement this, really struggling on this.
Please give me a step by step if possible
Reagrds,
Vinod

I guess it depends on how you want to present the choice of html/PDF to the user. One way would be to render the form as HTML for the task, and provide the PDF as an attachment. When they open the task, the form appears in HTML, but they could optionally open the attachment and submit the PDF. This would complete the task, but the HTML form would still be open in Workspace, which would probably confuse the user.
Another way would be to create a dynamic multi-page form - page one asks the user if they want HTML or PDF. When they submit that, the HTML or PDF form is opened. I'm not sure how to implement this. Hopefully other community members have some suggestions.

HT5390 is it possible to use windows RDP (terminal services) to remote into an apple server?

is it possible to use windows RDP (terminal services) to remote into an apple server?

corydchurch wrote:
is it possible to use windows RDP (terminal services) to remote into an apple server?
In the Windows world you can use RDP to remotely control a (Windows) server for administration purposes. You can also use RDP to connect to a Windows Terminal Server to run user applications on the server and multiple users can do this at the same time.
It is not possible to use RDP to remotely control a Mac server for administration purposes. You can however use Screen Sharing or VNC (if enabled) or install some other software like TImbuktu Pro to allow the same sort of thing. None of these use the RDP protocol. If your are a mainly or all Mac environment you would use Screen Sharing (Apple's custom version of VNC). You can get Windows versions of VNC and Timbuktu Pro which would therefore allow a Windows machine to remote control the Mac server.
It is however possible to buy and install a Mac Terminal server solution to allow multiple users to connect and run applications on the Mac server just like a Windows Terminal Server solution except as it is running on a Mac server it will allow running Mac applications rather than Windows applications. This is not for remote controlling the server. There are two such packages for the Mac these being AquaConnect and iRAPP. These can run their own proprietary protocol or they can also allow users to connect via the RDP protocol. This does therefore allow a Mac or Windows user to connect to the Mac Terminal Server and run Mac applications.

Essbase Enterprise Services Properties file?????

Hi All,
Can you please let me know where will find the Properties file, used by Essbase Enterprise Services?
I can see only the Properties File, used by HYPERION PROVIDER SERVICES.
I am using 11.1.1.3.
ftp://ftp.software.ibm.com/ps/products/db2olap/docs81/eds/props/propfile.htm#ExternalSecurityAuthentication.
Thankns,
Prathap

the essbase.properties for provider services is the correct one, ees does not exist anymore.
Cheers
John
http://john-goodwin.blogspot.com/

Do we need a SAP PI system to use SAP SRM enterprise services?

Hi,
I am working in a project where we need to use some enterprise services like ([Maintain Purchase Request|http://wiki.sdn.sap.com/wiki/display/ESpackages/MaintainPurchaseRequest]) for SAP SRM 7.x. We have an ECC 6 system also in the landscape but the middleware is a non-SAP one. My question is that to be able to use the SRM and Enterprise Services, do we need SAP PI or SAP CE in place. Any help or useful clue/pointers is appreciated.
Best regards,
Nilay

Hi Jesse,
Please refer to my blog for the details.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/06/13/transfer-of-central-contract-from-srm-to-ecc-using-web-services-without-pi
Regards,
Naveen

Possible to use command line argument in project file?

In my CI build process I would like to have a command line argument "customer" that should be used in the project file to include customer related files into the project like this:
<Content Include="..\customers\%(customer)\*">
<Link>%(RecursiveDir)%(FileName)%(Extension)</Link>
</Content>
Is that possible?

Hi pkursawe,
Try to use the Copy task, topy the custom files into the project, then add these files into the ItemGroup, check this blog post:
How To: Recursively Copy Files Using the <Copy> Task
The wildcard will help you to add related files into the project.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

CE -possible to combine different multiple enterprise services? and expose

can some one please let me know if there is any possibility to combine multple services into one and expose as a new service in CE 7.1/7.2?

You have multiple options:
1. Create a WSDL which has input similar to input of WS1 (only Region as input) and an output similar to output of WS3.
Create Proxy Service based on this WSDL. Then call all the thee business services one after the other and doing transformations/assigns as needed after each call. Finally map the result of BS3 to the similar output of your new WSDL on which the Proxy service is based.
2. Create an Any XML type of web service. Create a schema which has two elements, one for input and one for output. Input containing only Region and output containing all the details. All consumers need to send request according to input defined in schema and expect output defined in schema. Its similar to creating the WSDL but can be used in case your consumer do not want to call a Web Service but want to call an XML API over HTTP. Rest will be same as option 1.
Split join is needed to make calls in parallel, it wont be usable in your use case unless you expect a list og regions in the same request for each of which you need to gather same information by calling three services.

Is this possible? Using Illustrator Script to duplicate EPS file 35 times & changing C,M,Y,K value?

Hi everyone,
I need HELP I have a bunch of vector clip arts, which are Black (C,M,Y,K100). I need it in 35 different colors Saved as Illustrator 8 EPS and I also need those file in 72 DPI PNG Transparent files.
Thanks for any help.
Akkudo.

Good evening,
0) In your templates give a specific namme to each path or groups or items via the layers window.
     The objective is to use a script like these two:
    Set myLayerCercle = my_Laieur_elements.GroupItems("Laplupart").PathItems("LaplupartCercle")
        myAiApp.Redraw
        myLayerCercle.FillColor.Spot.Color.Cyan = 0
        myLayerCercle.FillColor.Spot.Color.Magenta = 100
        myLayerCercle.FillColor.Spot.Color.Yellow = 80
         myLayerCercle.FillColor.Spot.Color.Black = 0
       myAiApp.Redraw
or
textRef.Paragraphs.Add ("myNewText")
    textRef.Paragraphs(1).ParagraphAttributes.Justification = aiRight
    textRef.Paragraphs(1).CharacterAttributes.Size = 12
    textRef.Paragraphs(1).CharacterAttributes.HorizontalScale = 10
    textRef.TextRange.CharacterAttributes.BaselineShift = fontBaseLineShift
    textRef.TextRange.CharacterAttributes.TextFont = myAiApp.TextFonts.Item("Times")
    textRef.TextRange.CharacterAttributes.FillColor.Black = 0
    textRef.TextRange.CharacterAttributes.FillColor.Magenta = 100
    textRef.TextRange.CharacterAttributes.FillColor.Yellow = 0
    textRef.TextRange.CharacterAttributes.FillColor.Cyan = 0
If you agree please send your eps file via my email. I could be than more efficient.
Have a good evening
Patrice
*) open an office sofware (Word or Excel) and go to the Visual basic editor (alt+F11) and
copy and paste these script; replace nom_docAi with your eps file name
Public nom_docAi
Sub myPrg()
call OpenAi
call openBaseFile                          '= open the eps file
call myRectangle(100,100,200,300)
call saveEPS(nom_docAi )
call savePNG(nom_docAi )
end sub
Sub OpenAi()
'*** le fichier excel et illustrator se trouvent dans le même répertoire
myPath = ActiveWorkbook.Path
'*** Définition de la variable "application"
Set myAiApp = CreateObject("Illustrator.Application.CS4")
End Sub
Sub openBaseFile()
'*** Définition et ouverture du fichier illustrator de base
nom_eps = "cycle.eps"
'nom_docAi = myPath & "\" & nom_eps
nom_docAi = "G:\graph" & "\" & nom_eps
Set myDocAi = myAiApp.Open(nom_docAi, 1)
End Sub
Sub saveEps(myPictureName)
'*** Sauvegarde fichier
Set myDocAi = myAiApp.ActiveDocument
Set myEpsSave = CreateObject("Illustrator.EPSSaveOptions.CS4")
    myDocAi.CropBox = myDocAi.VisibleBounds
    myEpsSave.EmbedAllFonts = True
    myEpsSave.Preview = aiColorTIFF
    myEpsSave.postscript = ailevel3
    myAiApp.ActiveDocument.SaveAs myPictureName, myEpsSave
End Sub
sub myRectangle(x, y, LenghRect, HeightRect)
'*** Sélection du calque recevant les rectangles
Set Laieur = docAi.layers("data")
myAiApp.Redraw
Set myRect = docAi.PathItems.Rectangle(y, x, LenghRect, HeightRect)
myRect.FillColor.Cyan = 0
myRect.FillColor.Yellow = 100
myRect.FillColor.Magenta = 35
myRect.FillColor.Black = 0
myRect.Stroked = False
myAiApp.Redraw
'mTab = myCColor(mType)
End Function
Sub savePNG(myPictureName)
'*** Sauvegarde fichier
myPictureName = Replace(myPictureName, ".eps", ".png")
Set myAiApp = CreateObject("Illustrator.Application.CS4")
Set docAi = myAiApp.ActiveDocument
Set pngExportOptions = CreateObject("Illustrator.ExportOptionsPNG24.CS4")
pngExportOptions.AntiAliasing = True
pngExportOptions.Transparency = True
docAi.Export myPictureName, aiPNG24, pngExportOptions
End Sub

Possible to use swf or other screen capture files with RH8

Or am I limited to image files. Wish I could transition to HTML but not an option right now.
Thanks for your help.

That and the fact that Windows Vista no longer supports WinHelp files out of the box. Users have to download a viewer to enable them to see their contents. WinHelp is a help format that is so little used nowadays that I'd do all you can to migrate to another format.
Read the RoboColum(n).

Enterprise Services without ESR and EHP - is it possible

Hi All,
I am investigating if it is possible to setup Enterprise services without having ESR in our landscape. We also do not have EHP installed in our ERP system. We have SAP ECC 6.0 and PI 7.0.
I would like to install separate ES that I would like to use for our current project. I can't wait for installing ESR on PI and EHPs on ERP.
Is it possible? If it is how I can do it?
br
Dawid

Hi Dawid,
Contrary to what the previous post said (SudipPaul)...
It is possible to setup Enterprise Services without having an ESR in your landscape. You'll just need to ensure that the ECC version that you're on supports the Enterprise Service in question. You would typically search for possible Enterprise Services that you could use in the ES Workplace:
[http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?sap-unique=130459&sap-params=aWQ9RjZDRkMwRUEzRUYxNEJDOTg0MUM1MjgyNzJFRTg1ODMmcGFja2FnZWlkPURFMDQyNkREOUIwMjQ5RjE5NTE1MDAxQTY0RDNGNDYyJm1vZGU9]
From the ES Workplace you can also test drive the Enterprise Service that you're thinking of using to see if it meets your requirements. You do this by applying for access to the relevant backend system/s on the same landing page as above.
If you have identified an Enterprise Service that you want to use (you'll normally notice the ECC version or Industry Solution version that the enterprise service is available from) then you'll need to check whether you're on the right ECC version or higher. Use this forum thread as an example to identify that:
[Can't find ESA ECC-SE 603 SWCV;
So it is possible depending on whether the Enterprise Service is available with the ECC version you have & without PI or ESR or anything else. The ESR is a nice to have & just makes life a lot easier. A services registry is also a nice to have but not compulsory.
Regards, Trevor

Is it possible to call an external web service using ABAP?

Hi~~
I wonder that is possible to use an external web service in SAPGUI using ABAP without PI ( Process Integraion ).
The external web service means the service that is developed by web-language like ASP.NET.
Thank you.

hi,
i'm trying to study on how to use the oracle bi publisher using another client application aside from oracle. the client application is custom and uses a .Net framework. unfortunately, i am not familiar with how .Net sends requests to oracle bi publisher so i was thinking that may be i can just create oracle pl/sql stored procedures that can send this requests over to bi publisher.
p.s. when you said concurrent manager, i'm not sure if you are referring to oracle apps concurrent manager but if you are, unfortunately i won't be using oracle apps with bi publisher.
thanks
allen

Is it possible to use smartseek functionalities without FMS(flash media server)??

Hi,
    Is it possible to use smart seek functionalities to play files local files without using flash media server(FMS).
    I am currently using videoDisplay components but can switch to netStream component if it is possible without FMS.
    As I have to seek frame by frame but the current seek() function doesnot provide that functionality.
    Any kind of suggestion is most welcome.
    Thanks in Advance.

I'd like to revive this topic as I just purchased an ATV. I do like it but I am becoming very familiar with the limitations of the ATV.
I used to have a Snyology NAS server but it did not serve/stream the iTunes well enough to my stereo. I have a lot of photos of my children as well as movies and wanted to see more of them so I purchased the ATV as I knew the Syno server/NAS would be bricking soon.
Once the ATV is loaded it is fine for that content. But if there is other content on other computers well, they have to stream and the content on the ATV is not accessible to anything other than the stereo or TV that the ATV is connected to. So, finally, here is my question:
Which NAS streams VERY WELL with the ATV? Correct me if I am wrong but the NAS has to have iTunes imbedded within the server; yes? Secondly, is the best solution for serving an ATV as well as having all media content accessible to all LAN computers a Mac Mini?
So which is it? Please recommend an NAS that can serve iTunes media (music, photos, video) to an Apple TV or is the best solution a Mac Mini which acts like a NAS and streams all media content to the Apple TV and ATV will stream it to HDTV through HDMI , etc.
The ATV is great with the High Def.., wide screen, Dolby 5.1, HDMI port , etc. Just need a way to have the media accessible to everyone on the LAN as well as serve/stream to an already purchased Apple TV.
Thanks for the help,
Cc

Possible to use dnscmd to create host in a zone delegation?

I have been trying to run a dnscmd script to upload a CSV file that will add 600 host records to our DNS. We decided to delegate our main Forward Zone (company.local) for these specific devices (cameras.company.local).
My issue is when trying to add it gives me the DNS_ERROR_ZONE_DOES_NOT_EXIST.
Here is the command I am using:
dnscmd dc1 /recordadd cameras.company.local test a 10.10.10.1
My basic question is it even possible to use dnscmd to create a host file within a zone delegation?

try this
dnscmd dc1 /recordadd company.local test.cameras a 10.10.10.1
Also, would urge you to move to PowerShell, much intuitive and error handling is awesome there

FB01 posting using Enterprise Service for Accounting

Hi,
I get an error when trying to create a G/L account post using the following enterprise service.
Link: [AccountingDocumentERPBulkNotification_In|http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=8B45F549DDF711DB2B24000F20DAC9EF]
System: IDES ECC6.0 Ehp4
Testdata send from sproxy
<ns0:AccountingDocumentERPBulkNotification xmlns:ns0="http://sap.com/xi/SAPGlobal20/Global">
     <MessageHeader>
          <CreationDateTime>2011-01-18 10:58:47</CreationDateTime>
     </MessageHeader>
     <AccountingDocumentERPNotificationMessage>
          <MessageHeader>
               <CreationDateTime>2011-01-18 10:58:47</CreationDateTime>
          </MessageHeader>
          <AccountingDocumentERPNotification>
               <AccountingDocument>
                    <OriginalEntryDocumentID></OriginalEntryDocumentID>
                    <CompanyID>1000</CompanyID>
                    <SetOfBooksID>1234</SetOfBooksID>
                    <TypeCode>SA</TypeCode>
                    <OriginalEntryDocumentTypeCode>AB</OriginalEntryDocumentTypeCode>
                    <PostingDate>2011-01-18</PostingDate>
                    <Item>
                         <ID>01</ID>
                         <CostCentreID>2100</CostCentreID>
                         <ProfitCentreID>1402</ProfitCentreID>
                         <DebitCreditCode>1</DebitCreditCode>
                         <TransactionCurrencyAmount currencyCode="EUR">10</TransactionCurrencyAmount>
                         <GeneralLedgerAccountReference>
                              <ID>4</ID>
                         </GeneralLedgerAccountReference>
                    </Item>
                    <Item>
                         <ID>02</ID>
                         <CostCentreID>2100</CostCentreID>
                         <ProfitCentreID>1402</ProfitCentreID>
                         <DebitCreditCode>2</DebitCreditCode>
                         <TransactionCurrencyAmount currencyCode="EUR">10</TransactionCurrencyAmount>
                         <GeneralLedgerAccountReference>
                              <ID>4</ID>
                         </GeneralLedgerAccountReference>
                    </Item>
               </AccountingDocument>
          </AccountingDocumentERPNotification>
     </AccountingDocumentERPNotificationMessage>
</ns0:AccountingDocumentERPBulkNotification>
Error received in debugger
FI/CO interface: Object type SA not defined
Account 479000 does not exist in chart of accounts INT
G/L account 1000/479000 does not exist
G/L account 479000 is not defined in chart of accounts INT
Account 479000 does not exist in chart of accounts INT
G/L account 1000/479000 does not exist
G/L account 479000 is not defined in chart of accounts INT
Please help...

The problem was missing leading zeros in the fields
Old Values
<CostCentreID>2100</CostCentreID>
<ProfitCentreID>1402</ProfitCentreID>
<GeneralLedgerAccountReference><ID>4</ID></GeneralLedgerAccountReference>
New Values
<CostCentreID>0000002100</CostCentreID>
<ProfitCentreID>0000001402</ProfitCentreID>
<GeneralLedgerAccountReference><ID>0000000004</ID></GeneralLedgerAccountReference>

E2Open interfaces built using enterprise services

We need to build purchase orders related interfaces with E2Open and discussing on using IDOC vs ESOA services that were provided by SAP with Ehp4. We need to extend these services to get our custom data and using IDOCs would save time. There is web methods/software AG server (middleware) that will translate SAP structure into OAG structures.
Any suggestions/pros & cons on IDOC vs ESOA?

Hi Rajani,
My personal opinion:
I think that you need to think more long term, using IDOCs would save you time now but significantly reduces your flexibility. You should also factor into consideration business goals & strategy (where the company is headed towards).
If you have an ESR (Enterprise Service Repository) in your landscape (it comes shipped with SAP Netweaver CE or SAP PI), there's nothing stopping you from extending the standard SAP Enterprise Services to cater for your custom data. If you don't, an option would be to create custom Abap programs that wrap the enterprise service functionality & cater for your custom data. You could then web service enable those custom programs.
I'm personally not a big fan of IDOCs because I think that they are too cumbersome to use but they also work well. You need to ask yourself, some questions like:
- What if a business process changes, what would the impact be if you choose IDOCs over enterprise services?
- What if you at some stage need to orchestrate provisioning interfaces to cater for changing business / market / regulatory conditions?
- How much is SAP investing in Enterprise Services vs IDOCs?
- How agile is the approach of using IDOCs vs Enterprise Services?
- Does using IDOCs give you an egde over competitors & if there is a business opportunity that needs to be capitalized on, how quickly can you adapt the IDOC scenarios to take advantage of it?
- What about skill levels (developers etc.) for IDOCs & Enterprise services?
- Budget constraints?
These are just some questions...
On the whole, I think that Enterprise Services would work better but it depends on your specific circumstances & SAP is investing significantly more on Enterprise Servies than IDOCs so you would get that added benefit.
Regards, Trevor

Is it possible to use AAE in Enterprise Service to File Scenario?

Similar Messages

Maybe you are looking for