Is it Possible to use Aep. Files in Pr without After effect on your PC?

Hi i have a "minor" problem
basicly i have made some text animation in After effect and set the comp to Template in the advance tab
now it cant open on my clients computere becuase he does not have After effects on his PC
Is there a way to use it in Premiere regardless of not having After effect on your PC?

It all depends, in my opinion if you're making an applet to be used by Grandma signing
is the best way to go since Grandma doesn't know how to change policy and if she
knew (or asked her grandson) would not take the trouble to change it.
If you are makning an applet for a company for example to be used for theire on-line
courses signing is not the way to go. Since most companies have a system
administrator that doesn't like just any applet asking the users the "do you trust" question.
Because anyone can sign an applet. The default jre installation is for Grandma but in our
company (and many others) a policy is set up that ignores signatures and will only allow
extra privileges if this is specified in a policy.
Now in the java.security you can add a policy, when you point that policy to a location on the Intranet
users will use this polciy without beeing able to change it (themselves or by malicious software).
In the .policy file you can provide a keystore so you can (if so needed) provide "signed by" policys.
http://forum.java.sun.com/thread.jsp?forum=63&thread=524815
second post and last post for the java class file
http://forum.java.sun.com/thread.jsp?forum=63&thread=409341
4th and 6th post

Similar Messages

  • Is it possible to use backup files previously copied to an external hard drive to backup an iPhone?

    My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?

    Garageband can't use VST plugins.
    If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.

  • Is it possible to use .amr files in Logic Pro 9?

    I have a .amr file. Is it possible to use in Logic Pro and if so how? If not is there a way to convert it?

    "Is it possible to use .amr files in Logic Pro 9"
    Probably, but it's a freakin' travesty!

  • Is it possible to use a file refnum as an input of mathscript node

    Hi everybody,
    I just began to use LV and mathscript recently. One problem confused me a lot.  That is,
    Is it possible to use a file refnum as the input or output of mathscript node? A picture is attached for your reference.
    Thanks a lot!
    Gary
    Solved!
    Go to Solution.
    Attachments:
    Q-001.jpg ‏45 KB

    What would you hope to do with the reference?  The Mathscript node doesn't have a file reading capability.  You need to read the file and pass the data into the Mathscript node.
    EDIT: I stand corrected.  You need to use the fopen and fclose functions inside of the MathScript node to be able to read a file inside of it.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

    Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

    If you purchase the phone at the full contract price and have no term left on your carrier contract, the carrier will unlock it for you. That's what I am doing with AT&T. I'll pay the full purchase price for the phone and since I don't have a contract with them, they will unlock it for you. It can be difficult to get it done since most of their customer service is very ill informed but I have had many discussions with them on their chat that I have records of them stating they will unlock any phone if you do not have an existing contract. It's the law.

  • How to use Cinema4D lite with no opening After Effects CC ?

    How to use Cinema4D lite with no opening After Effects CC ?
    Is that possible ?
    Open a 3D object Photoshop-type in After Effects CC (without C4D)
    It is also possible?
    thanks
    xav

    It is as Mylenium says.
    See this page for details such as this:
    "You open the version of CINEMA 4D that is installed with After Effects using the New > MAXON CINEMA 4D File command or the Edit Original command in After Effects. You will not see this version of CINEMA 4D installed in the Start menu on Windows or in the Applications directory on Mac OS."

  • Time using C4D vs After Effects in your work?

    Hi,
    Just curious how much time do you spend using C4D vs After Effects in your work on average?
    Kind Regards,
    Anders

    Betty - very true and it depends on your needs - Flash and AE
    are very different programs for very
    different reasons and sometimes they can overlap in very
    creative ways. If all you want to do is
    create content for FLV in AE - than go for it - if you want
    to create vector-based animation and/or
    add robust interactivity using actionScript, then Flash is
    the right tool. Sometimes it isn't
    choosing one over the other but rather combining both for an
    even better experience.
    --> Adobe Certified Expert *ACE*
    --> www.mudbubble.com
    --> www.keyframer.com
    Betty Blue wrote:
    >
    > Look guys, I'm an enthusiastic After Effects user... for
    me it's one of the
    > best post-production tools ever invented. My question:
    why bother learning
    > Flash (a web-based animation program) when I can simply
    work in After Effects
    > (cool for video/broadcast) and then encode my stuff into
    flv format?
    >

  • Hi, my free trial license has expired, and I am wondering if it's possible to only pay for one month for after effects without locking for a year with monthly fee. I only need this for a project that is ending next week.

    Hi, my free trial license has expired, and I am wondering if it's possible to only pay for one month for after effects without locking for a year with monthly fee. I only need this for a project that is ending next week.

    Creative Cloud Plans
    https://creative.adobe.com/#plans

  • Thinking of using Cinema 4D when the new After Effects / Cineware comes out?

    Thinking of using Cinema 4D when the new After Effects / Cineware comes out? Thoughts of a C4D Newbie http://blogs.creativecow.net/blog/12786/an-editors-thoughts-on-being-a-maxon-cinema-4d-newbie

    Good question. But I'm guessing seeing how the CEO wont even talk about any new products, and has basically said the focus right now is the OS and not the hardware wont get any answers, just theories.
    Mine is I am guessing since all this will still be based off of webOS, apps will be backward compatible. But not forward due to hardware limits on older devices. So if you continue to have a Palm Profile you will always have access to those apps purchased. I could see the Palm Profile even being something transferable to other carriers like porting a number that way you can continue to keep those apps you have invested in. Just like the PalmOS was, even as new hardware came out you can even run those apps on the Pre via Classic emulator.

  • Is it possible to use a file from CS6 in CS5.5

    I'm hoping to buy CS6 but I use CS5.5 at college. Is it possible to bring a file from CS6 into CS5.5. If not, where can I get CS5.5?

    PS files are backward compatible if you save them with maximum compatibility enabled. likewise, AI files can be saved back to older versions. Of course in both cases specific features from CS6 will be lost or rasterized to pixels, so they are not editable in CS5.5. In Design might be a bit more tricky. It supports saving back to CS5.5, but this may completely ruin your documents, if you use the new dynamic layout features, Arabic text etc., so it's less useful to go that route.
    Mylenium

  • Is it possible to use JSF file as as error page.

    I am using jsf file as an error page.It is working in fine in websphere. But if i am using that only the exception is raised it is not going to error page.
    In Web.XML file,
    <servlet>
    <servlet-name>Faces Servlet</servlet-name>
    <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
    </servlet-mapping>
    <error-page>
    <error-code>403</error-code>          <location>/faces/unauthorized.jsp</location>
    </error-page>
    jsf codings are placed under *.jsp files. In the time submitting form data to server a method throws NumberFormatException. This exception information is displayed in console. but blankpage is coming . It is not redirected to error.jsp fle which is under faces/error.jsp.
    If i am directly giving /error.jsp then it is giving Faces context is not created error.
    So i tried use simple jsp(pure jsp) file wihtin the folder and i set path like /pages/foo.jsp. It is working.
    Tell me is it possible to use jsf as error page.

    What would you hope to do with the reference?  The Mathscript node doesn't have a file reading capability.  You need to read the file and pass the data into the Mathscript node.
    EDIT: I stand corrected.  You need to use the fopen and fclose functions inside of the MathScript node to be able to read a file inside of it.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Use Videos Created in Photoshop within After Effects - Possible?

    Hello, newbie here. Can i use create video files in Photoshop CC and then import them in After Effects CC as video files?
    I create video files in Photoshop CC using Photoshop CC's timeline* and save the video project in Photoshop as TIFF or PSD.
    When i import these TIFFs oder PSDs to After Effects, they will only appear as still images, whatever settings i use on import (footage vs. layers). I don't see how to have the TIFFs or PSDs playing in After Effects as a video.
    Is it even possible to bring a video project from Photoshop to AE as video and not as a still image?
    I understand that the alternative would be to render the Photoshop video as MP4 and bring that MP4 into After Effects. I would prefer to avoid the MP4 route though.
    Thanks!

    Dave, thanks - i import now the PSD file as "Sequence" and as "Composition - Retain Layer Size" and then i click "Create new Composition from Selection".
    Then i get a timeline which shows the correct running time of the video created in Photoshop. All the layers and tracks are there. I also see either an image from the video or a black screen.
    But i cannot play it. I can't see different frames of the video - neither by dragging the timeline marker nor by clicking "Play/Pause".
    That's certainly an awkward newbie problem - seeing your video, but not able to even play it. But i even watched through the full length of three extremely detailed Adobe/Lynda video tutorials (on the official Adobe site) and didn't get closer to an answer why the video doesn't play in AE.
    I have to admit that on importing i get a Quicktime error message. I also studied the official Adobe page regarding that error message and didn't understand it. But i know that when i 'had* Quicktime installed previously, it ruined my system and my mood.
    So if you have any quick hint, that would be great. Thanks!

  • Can not save in Audition after using "Edit in Adobe Audition" from After Effects CC

    Following the extra credit activity in Lesson 5 of "Adobe After Effects >> Classroom in a Book".
    Using Win7 and everything is local on my C drive.
    When i try to save in Audition I get "This file is in use by another application and cannot be overwritten"
    I searched the forums including this thread (http://forums.adobe.com/message/4520401) but nothing seemed to apply to me.
    Using unlocker, it seems that the piano.wav file is locked by DynamicLinkMediaServer.exe single PID but three handles. see a Piano.pkf files in folder but it is not locked and piano.wav is file showing up in audition. Quit audition a and tried again, so not sure if extra handles are artifacts from previous attempts or not.
    Just learning CC, but I've been programming PCs from the beginning so quite familiar in those aspects if you need me to track things down. Seems like this has been an issue for quite some time, but not in an environment as plain vanilla as mine.
    Any assistance would be greatly apprciated. The inter-program integration is a big asset to CC, but this is a major roadblock.
    --greg

    Go to the hardware setup - the settings for Edit View recording and Multitrack View recordings are separate, and it sounds as though one is configured correctly and the other isn't.

  • Bridge loads .mp4 files, upon import to After Effects, .mp4 video data lost

    Hello all,
    Today I've encountered a strange issue with my .mp4 file. My friend exported a video with h.264 compression with the YouTube 4k Preset from Premiere Pro CC (Mac version). The only settings he changed were the maximum/target bitrate to the maximum allowed and checked "maximum render quality". He exported that directly to his Dropbox desktop application and sent me the download link. I previewed it on Dropbox's website. There was audio and video. I downloaded the file and Windows Media Player sees it as just an audio file and there are no visuals. Quicktime sees it as a video file and displays visuals. I open the file in Bridge CS5.1 I have the Production Premium Collection CS5.5. In Adobe Bridge, the file contains audio and visuals (including metadata to back that up). I can even preview it. I right click the file and select place in After Effects and in After Effects, once again, the file shows no resolution, just audio. Why won't After Effects display my clip? (While the Bridge photo doesn't display it, if I drag the cursor to the middle, there is a preview of the frame. The preview area is just blank because I had to open clipping tool to take the screenshots.) Thank you!

    What happens if he makes you an intermediate file in something other than h.264?
    For the record, that's not an ideal choice for an intermediate codec. Is there a reason you can't use the native .r3d file?

  • Error using Detail-preserving Upscale module in After Effects

    I'm wanting to try and use the upscale module to upscale a video from 1080p to 4k, but it keeps crashing. Whenever I try, it'll seem to be trying for a few minutes, but then I get the error message "After Effects can't continue: An output module stopped responding. The file may be damaged or corrupted." But this doesn't make any sense because I know the video (a 30 second clip) plays just fine.

    You haven't told us much to help with troubleshooting. We'll need to know EXACT version number of AE (not "CC 2014", but actual 13.2.0.49-style version number), format of clip, codec of clip, and lots more!
    FAQ: What information should I provide ?

Maybe you are looking for