Is it possible to use airplay for image and sound via bluetooth speaker for sound?

I want to play my presentations using airplay, and it works perfectly, but i tried to use my bluetooth speakers at the same time and it doesn't seems possible! Each time i choose the bt speaker on system preferences it disconnects the airplay. Any suggestion?

Hello, you'd need another Router, or at least a different range of IPs on the Router for Wired & Wifi, or at the very least specifically mount Windows® shares by IP.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.

Similar Messages

  • How can i use my iPhone 4 and connect via bluetooth with my macpro

    how can i use my iPhone 4 and connect via bluetooth with my macpro

    The only way that you can connect your iPhone to the mac is to use it for a "Wi-fi hotspot" meaning that you can use the celluar connectivity of your phone to connect your computer to the interent.
    Do you mean a MacBook Pro of the desktop MacPro?

  • HT201343 My MacBook Pro is a 15 inch Early 2011 Model i was using airplay for a while and now suddenlly i dont see it on my status bar?

    My MacBook Pro is a 15 inch Early 2011 Model i was using airplay for a long time and i could always turn it on from my status bar and now recently i cant seem to find it on my status bar and it says Apple TV is not connected

    Hi LoganXDasz,
    If you are having issues with AirPlay availability, you may find the following article helpful:
    Apple Support: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Cheers,
    - Brenden

  • No sound when using Airplay for Movies on Apple TV

    For reasons unknow, when I try to stream full length movies (Lion King and Nemo bought from iTunes) from my iPhone or Macbook Pro using Airplay, there is no sound.  When I stream smaller movies, like Boundin' the Pixar Short, there is no problem.
    Side note 1: Why do purchased movies not show up like purchased TV shows on Apple TV?  I feel like I shouldn't have to use Airplay for movies if I don't need to use it for TV shows I buy.
    Side note 2: For some Netflix movies played directly from Apple TV there is no sound.  Other movies work fine and the movies that work or don't work seem to change day to day.
    Thanks for your help.

    Gldsndz wrote:
    Side note 1: Why do purchased movies not show up like purchased TV shows on Apple TV?  I feel like I shouldn't have to use Airplay for movies if I don't need to use it for TV shows I buy.
    Apple has not negotiated the rights to allow this is the assumed reason.
    We can't even play Purchased music or TV Shows from the cloud in UK.

  • Is it possible to use iChat for non network video conferanci

    Hi all,
    I am looking for a little help please. This may be a fruitless question, but here it goes. I have a deaf 5th grader. TTY relay is essentially a thing of the past, and all of her friends are using 'video phone' to keep in touch. Anyway, today we got a Sorenson VRS router and video phone camera from her school, and it uses our existing cable internet connection. It is a BUNCH of stuff to hook up to an already crowded system. Does anyone have any ideas about the possibility of using iChat for my daughter to connect to her friends that will be using a different system?
    Sorry if this is the question of a Neophyte. I am learning this deaf world as i go.
    Thanks,
    Chad

    HI Randell,
    Welcome to the Apple Discussion Pages.
    I can tell you what iChat will do and maybe that will help.
    iChat is an Instant Messaging service that uses the AIM servers. Therefore it is an AIM client.
    AIM stands for AOL Instant Messenger.
    You can join this service in several ways.
    1) By having the AOL Package where AOL is your Internet provider (ISP)
    2) By having the stand alone Application referred on these Discussions as the AIM application (comes in several version for PC, Macs, Linux and phones although each version varies as to what it can do - see side bar at link page).
    3) Or by another application that is also an AIM client.
    On a Mac that can be Proteus or AdiumX, there are PC AIM clients like Trillian.
    Some AIM clients only do some of the features.
    FOr instance iChat to PC AIM can Video (Moving Pics and Sound) but not Audio only.
    iChat to Trillian on a PC can do both Video and Audio only if the PC end has the Pro version of Trillian ($25)
    All clients can at least Text chat.
    Many can send files and pics as well as Text chatting.
    iChat can support Text chatting, Audio Chats and Video chats. Any USB Mic will work for Audio chats. Many Firewire DV Camcorders also work, many Firewire Webcams also work and some USB cams can be made to work with iChat.
    To do this iChat needs a fast enough Mac (Procesor speed) and a fast enough interent Connection Speed.
    In iChat 2 there is felt to be a better chance of success with connections to PC machines running either AIM (or the AOL package) or Trillian Pro for Video chats.
    Text chats and Video chats can be done to the same Buddy (contact) at the same time. I would have thought this would be ideal as it provides a chance to practice lip reading skills and not missing any of the info.
    What iChat 2 can not do.
    1) Chat to other services like MSN or Yahoo!
    2) Chat or link to Video phones.
    3) Video to Mobile (cell) phones.
    4) Connect to other Video conferencing services.
    For more info start here
    Faq on how to start in iChat
    This tells you more about connecting to PCs.
    More info than you might need at this stage http://www.ralphjohnsuk.dsl.pipex.com/
    What iChat 3 adds.
    1) Upto 4 people in a Video chat
    2) Access to the Jabber service (Another Instant Messaging service). This also can use Jabber servers that provide things called Tranports Gateways to other IM services which allows Text chatting to Buddiies on these services.
    Ralph

  • Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

    I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
    Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
    in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
    So, a typical Lync deployment looks like this:
           Internal users
                     |
                   443
                      |
              Internal LB
            192.168.0.20
            443         443
              |               |
       Lync FE 1     Lync FE 2
    192.168.0.21 192.168.0.22
              |               |
          4443        4443
              External LB
           Public IP Address
                     |
                  443
                     |
           External Users
    This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
    is the keyword here.
    After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
    adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
    Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
    For reference, my commands are:
    Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
    (This completes successfully)
    Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
    (This fails)
    The existing external endpoint is configured as such:
    Get-AzureVM LYNCFE1 | get-azureendpoint
    LBSetName : HttpsExtLB
    LocalPort : 4443
    Name : HTTPS-Ext
    Port : 443
    Protocol : tcp
    Vip :
    ProbePath :
    ProbePort : 4443
    ProbeProtocol : tcp
    ProbeIntervalInSeconds : 15
    ProbeTimeoutInSeconds : 31
    EnableDirectServerReturn : False
    Acl : {}
    InternalLoadBalancerName :
    IdleTimeoutInMinutes :
    LoadBalancerDistribution :
    The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
    shouldn't be any conflict here... however it looks like there is one instead.
    Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

    Hello Massimo Pascucci,
    The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
    known as the Internal load balanced IP) per cloud service.
    There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
    You can leave your feedback by following the link below:
    https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
    Refer to this article for more information on Internal load balancer:
    http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
    Thanks,
    Syed Irfan Hussain

  • Is it possible to use an exact phrase and a wildcard in the same query

    I am building an address finder, and i have an option where the user can enter part or a full uk postcode. There is a ctxcat index on the address field. I am having a problem searching for part of the postcode, if i enter 'ZZ1 2*' it finds all ZZ1 and all house number 2's if i enter ' " ZZ1 2"*' it fails with an error, is this a bug or is it not possibl to use the exact phrasing and wildcard at the same time.
    If its not possible can anyone suggest another way round this query.
    Thank

    hi,
    in my table i have a column called address,
    these would contain something along the lines of these 2 records.
    10 high street anytown ZZ1 3ZZ
    3 bridge street anytown ZZ1 8ZZ
    If searching on the postcode, the user may enter ZZ1 3 at the moment this would bring back both records, the first one from the ZZ1 and the second one from the house number 3. however if ZZ1 3 is entered i am wanting to just search on the postcode, so it would only match on the first record. so i would like to put the double quotes round the "ZZ1 3" to match on the exact phrase, but then no records come back because of the two letters after the 3, this was why i am asking about the wildcards after the exact phrase ,atch, so it can match the exact phrase of 'ZZ1 3' but then allow any characters after that.
    hope this explaings my problem a bit better.

  • Just bought a 2tb external hard drive with the intention of moving my iPhoto data files on it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app? Do I need to point iPhoto to this new location?

    Just bought a 2tb external hard drive with the intention of moving my iPhoto data files to it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app?
    Do I need to point iPhoto to this new location?
    Thanks!

    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
    Assuming a Managed Library:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Trouble using AirPlay between iMac and AppleTV

    I'm running OS X Lion 10.7.5 and I'm having trouble using AirPlay between iMac and AppleTV (2nd Gen).  It used to work fine, but for some reason it just stopped responding.  I can see my media on my iMac from AppleTV and I can see AppleTV from my iMac when attempting to use AirPlay.  However, when I try to pull or push media from my iMac to AppleTV it just stalls and never loads.  AirPlay works fine from my iPhone and iPad with AppleTV - it's limited to my iMac only. 
    I'm using a Netgear R7000 wireless router and a Netgear AC120 WiFi Extender and as such, I have 4 available wireless networks (2 from the router and 2 from the extender / 2 - 2.4 GHz and 2 - 5 GHz).  My internet access is great and my network performance is good across the board.  All of my software/firmware is up to date (iMac, AppleTV and router/extenders). I've tried all combinations (mixing/matching) all of my wireless networks between devices (iMac/AppleTV) - nothing makes a difference (again, AirPlay works fine between my mobile devises/AppleTV).  Netgear Genie has been making changes to my network settings as new firmware has been installed in both the router and extender.  I'm guessing there is something screwy going on with the network settings on the iMac, but I can't figure it out.
    Anyone have any suggestions?
    Thanks!

    I'm glad you got it all working. Out of interest, how do you (or your son) connect to the internet now? Is it just a dial-up connection? If it is, I am sure you know that, even if you get the Apple TV to share the connection, the speed will seriously limit the use of many of the Apple TV's features.
    The Airport Extreme is a great router but you will need a DSL or cable modem as well as it won't connect to the internet without one. There are many great (and cheaper!) combined modem/routers available if your son wants to get a high-speed network up and running at lower cost. Any other computers, phones, games consoles etc that you may have in the house can then all connect easily.
    I hope that I have helped a little and I will look out for future posts in case I can help again.

  • How is it possible to adjust the background images and the text in Mail?

    How is it possible to adjust the background images and the text in Mail?

    Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
    http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
    A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

  • Qosmio G50-10I - No synchronization on TV between image and sound

    My problem is that there is no synchronization between image and sound (+the sound is late about 5 seconds+)
    when i watch TV on Windows Media Center on Qosmio G50-10I
    I tried to change the settings on Windows Media Center but some will be escape.

    How did you connect this TV to the G50?
    Do you use the HDMI cable which provides the audio and video signal together at the same time or did you connect the TV with two different cables (for audio signal & video signal)?
    Please check additionally the settings in Realtek HD audio manager which can be found in the control panel. There you can change some sound effects for different audio outputs (HDMI, digital, speakers)
    PS: Last but not least install some codecs. I recommend a package called K-Lite Mega codec package

  • Optimization on Load Time (Large Images and Sounds)

    Hi,
    I have an all flash website that works by having each portion of it to load and unload in the center of a frame based off the navigation chosen.  Load times on everything but one part of my site are ok.
    The dimensions of the part inside the frame are 968x674.  I know that's relatively large for a flash file, but that can't be changed at this point.
    Within the page there are objects that come up when you find an item on the screen.  Its a dialog box and it shows text, an image, and has a voice over that reads what the text says.  After you're done looking at it, there is an x-button to dismiss the window.  There are 15 of these and they are exported to the actionscript.  I add them in the actionscript via addChild.  I figured this is a huge spot that could be reconfigured, but I'm not sure if it would make much a difference.
    The other huge thing is there is a ton on the screen.  It starts you off in an environment, and when you click 3 different sections, it zooms into that portion allowing you to look for the items you're trying to find.
    There is also a man that talks and animates in the beginning and at the end.  We are planning on taking out the end part and putting a text box up.
    Here is the website..  its a propane safety site for kids.  I know its kind of a weird idea, but it works and people seem to like it.
    www.propanekids.com
    The two parts of the site we are trying to optimize is the main menu when you first are at the site, and the "Explore" section.  (Just click on the cloud on the front page.
    If someone could take the time to give me some new ideas of how I can get these loading times down, I would greatly appreciate it!
    Thanks

    Ok, who ever posted this message is hacking me  and i can't believe you guys are helping
    Date: Thu, 27 Jan 2011 11:07:28 -0700
    From: [email protected]
    To: [email protected]
    Subject: Optimization on Load Time (Large Images and Sounds)
    Hi,
    I have an all flash website that works by having each portion of it to load and unload in the center of a frame based off the navigation chosen.  Load times on everything but one part of my site are ok.
    The dimensions of the part inside the frame are 968x674.  I know that's relatively large for a flash file, but that can't be changed at this point.
    Within the page there are objects that come up when you find an item on the screen.  Its a dialog box and it shows text, an image, and has a voice over that reads what the text says.  After you're done looking at it, there is an x-button to dismiss the window.  There are 15 of these and they are exported to the actionscript.  I add them in the actionscript via addChild.  I figured this is a huge spot that could be reconfigured, but I'm not sure if it would make much a difference.
    The other huge thing is there is a ton on the screen.  It starts you off in an environment, and when you click 3 different sections, it zooms into that portion allowing you to look for the items you're trying to find.
    There is also a man that talks and animates in the beginning and at the end.  We are planning on taking out the end part and putting a text box up.
    Here is the website..  its a propane safety site for kids.  I know its kind of a weird idea, but it works and people seem to like it.
    http://www.propanekids.com
    The two parts of the site we are trying to optimize is the main menu when you first are at the site, and the "Explore" section.  (Just click on the cloud on the front page.
    If someone could take the time to give me some new ideas of how I can get these loading times down, I would greatly appreciate it!
    Thanks
    >

  • I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

    I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

    I asked same question
    Any answers

  • Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)

    Why does not connect properly macpro my motorola bluetooth headphones S10?     I get a connection error message and there is no sound.                         (I want to use headphones to listen to music via bluetooth from my macpro)   
    the s10 works perfectly on my ipod touch 4g. 

    this is   
    ERROR HAS OCCURRED Bluetooth audio.
    It failed to establish connection with their
    audio device. make sure it is on and
    in the range. you may need to restart the
      audio section of the program you were using
    STOP USING THE HEADSET WITH MICROPHONE.
    ALSO HAVE A MOTOROLA BLUETOOTH SPEAKERS WHICH EQ5 work seamlessly with the Mac

  • HT4437 Can I use AirPlay for Apple TV 1st generation

    Is it possible to stream from iPad or iPhone to Apple TV 1st generation.

    No, Airplay does not work on AppleTV 1.  The software does not handle the protocol.
    While Apple TV 1 can handle the Airtunes protocol for audio, current iOS versions seems to ignore this from apps like Music.
    Your only option for audio on current iOS I've found is to use Remote app to control an itunes library for music and use 'Airplay' to the AppleTV for the music - iTunes still allows Airplay devices output for audio.
    You could also control AppleTV connected to a Sync or Share iTunes library using Remore but of course computer needs to be running.
    AC

Maybe you are looking for

  • 1) How do I restore a spreadsheet that says "Spreadsheet couldn't be imported. An error occurred." & 2) How do I prevent this from happening?

    Several times on my iPad, I have been getting the following message when trying to open a Numbers spreadsheet that I've been working on: "Spreadsheet couldn't be imported. An error occurred." The icon had already turned into a generic Numbers icon at

  • Including Sound In A Rollover that works on all browsers

    I am working on a website for my company that we wanted to have a musical logo play when you rollover the logo on the page. I added a behavior to a hotspot link that uses "onMouseOver" to playsound. This works great in the safari browser. However, in

  • Mapping the IFS from a Windows 2003 service

    Hi, We are trying to install Esker inbound faxing. The process involves their software receiving a file to a Windows server and transfering the file directily to the IFS using a service. My question is how do you get the service user mapping to be av

  • Processing email attahcment in bpel

    Hi, I have a requirement to parse xsl file. I am using UMS adapter to listen for email messages. If email has an attachment ( xls ), then I need to parse it. I'm getting atthachment @href and with getAttachmentContent assign value to bpel variable. H

  • Message Mapping - JDBC to IDoc

    Hi, I trying to map the resultset from a JDBC adapter (sender) to Inbound IDoc into SAP. I have problems with message mapping and after reading through a number of threads, I followed the following steps: 1. Download the IDoc definition as XSD. 2. Ch