Is it possible to use Airport Express as a repeater and as an airplay device at the same time?

Hi,
I am using airplay with airport express stations in combination with conventional speakers for my home entertainment. Works great. Only thing is that I have a massive block of concrete in my flat. Is it possible to use one of my express stations as a repeater and at the same time as a streaming device for airplay? Thanks!

Sure it works only with apple routers? Cause than I could stop trying.
Yes, it's proprietary like everything else Apple. You could look at this:
http://www.amazon.co.uk/dp/B006BBYXPA/?tag=hydra0b-21&hvadid=9550946469&ref=asc_ df_B006BBYXPA
I have had great success installing these for BT Home Hubs and VM Superhubs.
@JoeMY - If it is "joined" to the FritzBox then it won't work, it only works with Apple routers connected via Ethernet or as the main router.

Similar Messages

  • Can an Airport extend a wireless network and support a USB printer at the same time?

    Can an Airport extend a wireless network and support a USB printer at the same time?

    Yes, if the AirPort Express is extending the wireless signal produced by another Apple router. The Express cannot wirelessly extend a network produced by a non-Apple router.
    In addition to extending the network and connecting a printer, AirPlay can also be enabled on the AirPort Express, with all services operating simultaneously.
    Please note that only the print function will work if you connect an All-in-One type device to the USB port on the Express. Advanced features like copy, scan, mainentance, etc are not supported when an All-in-One device is connected to the USB port on an AirPort router.

  • Use TC as a wireless client and as ethernet switch hub at the same time?

    Hi!
    I have a wireless DSL-modem downstairs and my office upstairs. Since I use the TC-USB Port for my printer (to share it to my family as well) my TC is located in the office, close to the printer. Thus TC has to be configured as a wireless client and everything works fine so far,........but: When I add music (stored on TC) to my iTunes library, everything is soooo sloooow! Copying files using the route iMAC ---> DSL-modem/router ----> TC .... so sloooooow!
    Is there any way to use the ethernet ports while TC is a wireless client?
    Whenever I connect my iMac via ethernet using my current setup, it doesn't get an IP address from TC (obviously because there is no DHCP service active???). When I disable my Airport on the iMac, all connections are off-line.
    Pls. help or advise!
    Thx. Hannes

    Thanks for the response.
    Everything works fine if I use your suggested setup but I need the TC in the office, and the DSL modem downstairs. An ethernet connection is not possible this way, and the printer in the living room isn't really a nice piece of furniture
    I think, there is no possibility to use the wireless as uplink and the TC as a router/DHCP-server...
    Probably I need a server computer to handle the connection between the wireless LAN created by the DSL modem and an ethernet network managed by the TC.
    Hopefully someone has an idea/solution that fixes my problem.
    meanwhile I keep looking......

  • Can I use MAC OS 10.5.8 and MAC OS 9.2 at the same time?

    Can I use to an ibook G4 using MAC OS 10.5.8 the MAC OS 9.2(classic environment) in order to run an application that runs in classic encironment? I have a desktop G4 that runs 10.3 and it is possible to run on this MAC. Can I do the same to the ibook using 10.5.8?

    The easiest way to have Classic on an iBook g4.
    1.     Install 10.4 and update to 10.4.11.
    2.    Copy an existing Mac OS9 System folder to the hard drive.
    3.    Open System Preferences and click Classic.
    4.     Select the preferences you desire.

  • Using Airport Express for External speakers and Apple TV.  When I'm on MAC computer adn using internet sound from Internet does not go through external speakers.  Instead it comes out of Mac computer speaker.  Why?

    Using Airport Express for External speakers and Apple TV.  When I'm on MAC computer adn using internet sound from Internet does not go through external speakers.  Instead it comes out of Mac computer speaker.  Why?

    As far as I know, the Airport Express only transmits sounds via Itunes. So every other sound (internet, but also incoming mail) will be coming out of your mac instead of your external speakers.

  • HT2508 Airport express for more than one device at the same time.

    I just set up my Airport Express on my MacBook, but when I try to use this wireless connection on my iPad, I have to disconnect from my existing connection on my MacBook first. How can I use both devices at the same time without having to disconnect?

    Hi,
    Yes.
    Jim

  • TS2972 I would like to share my iTunes libraries with my Apple TV from both my iMac and Macbook Pro, but I use the same iTunes account on both devices. Is it possible to link my Apple TV to both devices at the same time?

    I recently purchased an Apple TV, and I currently have it linked to my iMac with my iTunes account. I also have a newer MacBook Pro that has some different iTunes media on it than my iMac does, but they share iTunes accounts. Is it possible to link both devices at the same time, have access to media on both computers, and use the same iTunes account on both computers?? It seems Apple TV will only link to one iTunes account per computer, but can access multiple computers if different iTunes accounts are activated on those computers.

    You can share multiple libraries with the Apple TV, they don't even need to use the same iTunes account. Just make sure that you use the same ID for homesharing on all devices.

  • My Apple Airport Express is blinking Amber and I cannot find it with the utility

    My Apple Airport Express is blinking Amber and I cannot find it with the utility

    Hi, had the same problem -
    1) Connected AE to Time Capsule with Ethernet cable - Configured it  - All worked fine
    2) Removed Ethernet cable between AE og TC - All worked fine
    3) Unpluged my AE from the socket outlet (power off) and pluged it inn where its supposed to be (2m from my Time Capsule)
    4) Now Airport Utility do not find me AE (after all i reconfigured through the Etheret calbe) ????
    A) Seems that Airport Utility are not able to "see" any wireless AE, only configurable by Ethernet Cable.
    B) Seems that AE are not able to reconnect to configured network after a power loss.
    This is a little bit ****** - older airport utility had none of the problems (A and B)

  • Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

    Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

    As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

  • It is possible to charge an iPad3 over USB and transmit data over USB at the same time?

    Hello,
    it is possible to charge an iPad3 over USB and transmit data over USB at the same time?
    If yes, how?
    Thanks
    Best regards

    OK!?
    That is right that the USB data oins are not connected to +5V pin.
    But i found a description for a self built power supply for iPad.
    http://timothyb.net/DIY_iPad_2_USB_Charger.html
    and
    https://www.mikrocontroller.net/topic/262610?goto=2726627#2726627
    The description say: data pin D- need a voltage level of 2V and D+ 2,857V
    when the data pins have this special voltage levels and VCC has +5V only then the iPad is charging.
    The voltage "D+/D- coding" is the key for the iPad to charge.
    OK now back to my problem.
    The regular USB data pin voltage level is 0,3 - 3.,0 voltage. When the iPad is charging the data pins have this special voltage level. Now i try to transmit data over the usb data pins with the. Normaly the USB port transmit the data with a voltage level of max. 3V.
    And here my problem. The higher voltage level at the data pins cares therefor that the iPad stop the charging.
    Is that correct?

  • When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    I just found the solution!
    Niel
    Re: Why is my Finder window popping up when I open my Safari window? 
    Jan 20, 2008 7:58 PM (in response to alak)
    Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252) 
    iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1)

  • When I use a projector via a VGA adapter I can not run my Bluetooth speaker or other Bluetooth devices at the same time. Can anyone help me with this?

    I try to find help. I can not run a projector and a Bluetooth device at the same time. Even though my Bluetooth speaker is recognized, and I have changed the settings to this speaker, it wont play any sound. I have got also problems using other Bluetooth devices when I use the projector via a VGA adapter.

    I try to find help. I can not run a projector and a Bluetooth device at the same time. Even though my Bluetooth speaker is recognized, and I have changed the settings to this speaker, it wont play any sound. I have got also problems using other Bluetooth devices when I use the projector via a VGA adapter.

  • Can one iTunes Radio account be used on more than one device at the same time?

    With an iTunes Match account, can ad-free iTunes Radio be used on two devices at the same time on that same account?

    Hi,
    Yes.
    Jim

  • Using facetime and ichat on different devices under the same apple account

    using facetime and ichat  on different devices under the same apple account

    Redeem it on any one; it'll be available to the others automatically.
    (119212)

  • Is it possible to use Airport Express to extend my Cisco E2500 wireless network

    Hi everyone,
           I just bought the new 2012 Airport Express yesterday, and want to extend my network which is using Cisco E2500 via the Ethernet port, but I don't know how to do it, anyone can tell me if it is possible and how to do it?

    Hi Bob, I have successfully extend my Cisco E2500 network using the 2012 Airport Express via Ethernet port, below is the things I have configured.
    1. Inside AirPort Utility - Wireless Tab, choose "Create a wireless network" in the Network Mode option, use the same Wireless Network Name, Wireless Security, Wireless Passowrd as the Cisco E2500.
    2. In the Internet Tab, I just choose using DHCP since the Cisco E2500 will be the one to distribute IP Address, then the IP address, subnet mask, router address and DNS servers address has been assigned successfully to Airport Express.
    3. In Network Tab, use "Off (Bridge Mode)" for the Router Mode option.
    4. Click Update, and let the Airport Express to update itself and restart.
    All done, and all my devices in different part of my house can access the internet connection, also my iMac in the living room and airplay music to the speaker that connect to my Airport Express inside the bedroom.

Maybe you are looking for

  • Mass Approval of Leave Request...need function module or any program

    Hi All, I have developed Custom Application in webdynpro java  for Leave,Travel,now i got the new requirements for mass approval of Leave and Travel can any baddy provide me any input ,i don't know which functional module or program i use , help guru

  • Can not control / observe when no user logged in

    Been fighting this for weeks. Searched the forum but found no relief. Using ARD 3.2 we can control / observe from our office to several workstations both in our same building and in other offices around the country. On all but one we can control / ob

  • Prerequisites  for configuring RMAN

    Hi All, My database is in AIX Box.. I have to configure Rman backup in Windows system.. What are all the prerequisites for configuring the Rman?

  • My history keeps deleting itself. How do I prevent this?

    I went to the options tab and private browsing is not on. The box about clearing history every time I exit isn't checked. Every thing is the same, except my history just automatically deletes itself. I don't know what happened.

  • AccessControlException with internet explorer

    hi! i have made proper changes 'C:\jdk\jre\lib\security\java.policy' file to give permission to write and i don't get AccessControlException with appletviewer. but i get when i use internet explorer v5.0 . how will i solve this? best regards.