Is it possible to use .amr files in Logic Pro 9?

I have a .amr file. Is it possible to use in Logic Pro and if so how? If not is there a way to convert it?

"Is it possible to use .amr files in Logic Pro 9"
Probably, but it's a freakin' travesty!

Similar Messages

Can't use .mid file with Logic Pro 9

I've been given a .mid file from someone I know but I'm not having any success trying to access the file in Logic.
The file should just contain a piano piece he had written.
When I first downloaded the file it automatically opened with QuickTime Player. I closed this then tried various ways of getting it into Logic. Firstly I went to File > Open, and chose the .mid file. This was the result:
"Damaged project or not a Logic Pro project!
"Search for fragments?
"Damaged projects might create problems and crashes!"
'Search' or 'Cancel'
When I click 'Search' I'm told:
"Read error!
"This is not a Logic Pro project!
"No tracks found"
'Continue'
So, is the file empty (no tracks found)?
Or, because it was not created in Logic, it can't be opened in Logic. (I think he is using a PC, not confirmed yet - I also don't know what DAW he's using, yet)
That's ridiculous though, I thought MIDI was a universal language?
I also tried dragging the file straight into a Logic project, which tells me:
"No tracks found"
Can someone please give me a little hand!? Thank you
Message was edited by: JofishSamuel

JofishSamuel wrote:
Okay? Sorry, I have no experience with .mid files as I've never exported or imported them or moved them before... or even highlighted one before!
Two ideas, have your friend check and make sure the mid file plays on his/her system.
and/or
If the mid file checks out good on his/her system have them compress (ZIP) the file and resend as it could have become corrupted during transfer. It can happen.
Your description of the file (zero length) sounds like it missed the last few bytes.
pancenter-

Trying to use SF2 files in Logic Pro 8

A friend told me to drop the .SF2 file into MyName/LIBRARY/AUDIO/SOUNDS/BANKS, which I did. But, I don't see the sound font 2 files showing up anywhere in my "Library" in Logic. He said it would show up in EXS instrument panel. But it doesn't. Anyone with experience with this? Thanks.

Hi,
Just drop it in 'yourdisk'/Library/Application Support/Logic/Sampler Instruments/{any of the folders here}. Then it should appear in your EXS dropdown menu, you can select it and EXS will convert it to an EXS instrument.
regards, erik.

Is it possible to use backup files previously copied to an external hard drive to backup an iPhone?

My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?

Garageband can't use VST plugins.
If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.

Is it possible to use a file refnum as an input of mathscript node

Hi everybody,
I just began to use LV and mathscript recently. One problem confused me a lot. That is,
Is it possible to use a file refnum as the input or output of mathscript node? A picture is attached for your reference.
Thanks a lot!
Gary
Solved!
Go to Solution.
Attachments:
Q-001.jpg ‏45 KB

What would you hope to do with the reference? The Mathscript node doesn't have a file reading capability. You need to read the file and pass the data into the Mathscript node.
EDIT: I stand corrected. You need to use the fopen and fclose functions inside of the MathScript node to be able to read a file inside of it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Is it possible to use one of the mac pro's internal hard drives as a external drive that can be accessed by a macbook etc?

is it possible to use one of the mac pro's internal hard drives as a external drive that can be accessed by a macbook etc?

Only if you move it to an external enclosure and let them both access it through a file server.

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a relat

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a related point in the video?

take have to take turns
and you have to disable one and enable the other manually

Using Logic Express 8 to open .aif or iso song files from Logic Pro

I can open the song but only the lead vocal track has volume. I get a message that some of the files are "5 bit" and can't work with Logic Express 8. Is there a problem converting these files from Logic Pro to Logic Express 8 or do I have another problem

assuming no one else responds with a more complete answer, can you be a bit more specific of exactly what the message says in full.
Does it give you any indication which files?
Logic Pro does have more plug-ins and features that will not be backward compatible, especially if it some plug in that is required that comes with LP but not LE.
I haven't been able to find any reference about 5-bit - hence the need perhaps for a more complete message output.

Ich nutze Logic Pro um Midi-Files zu bearbeiten. Unbearbeitete Midi-Files werden von Qmidi mit deutschen Buchstaben ä, ö, ü, ß wiedergegeben. Sobald ich das midi-file mit logic-Pro bearbeitet habe werden die Buchstaben nicht korrekt wiedergegeben

Ich nutze Logic Pro um Midi-Files zu bearbeiten. Unbearbeitete Midi-Files werden von Qmidi mit deutschen Buchstaben ä, ö, ü, ß wiedergegeben. Sobald ich das midi-file mit logic-Pro bearbeitet habe werden die Buchstaben nicht korrekt wiedergegeben. Dies passiert auch, wenn ich keine Änderungen im Midi-File vorgenommen habe. Bei Qmidi kann ich die Schriftarten / Einstellung " Western ( ISO Latin 1 ) " eingeben und diese Buchstaben werden korrekt erkannt. Es muss daran liegen, was Logic Pro aus dem Midi-File macht.
vielen Dank für Eure Hilfe im voraus
I use Logic Pro to edit midi files. Unprocessed Midi-Files reproduced from the programm "Qmidi" with German letters ä, ö, ü ß. Once I have edited the midi-file with logic-Pro are not correctly play back the letters. This also happens when I have not made any changes in the midi file. In Qmidi I can the font / setting "Western (ISO Latin 1)" and enter these characters are correctly recognized. It must be because what makes Logic Pro from the midi file.
Thank you for your help in advance

That's clearly a bug. Please send this to Apple using their feedback form:
http://www.apple.com/feedback/logic-pro.html
Best,
DaCaptain

How to use pianoteq sounds in logic pro?

How to use pianoteq sounds in logic pro? I've got an iMac 3.6 Ghz., intel core i5, OS 10.8.5. I want to be able to use my Bluthner piano sound (which is an add-on in pianoteq) in Logic Pro X (10.0.4).
Thanks,
Peter.

Hi
Try this in a new empty project:
In the New Tracks box select a software instrument track, and un-check the Open Library box
You will see a track plus the channel in the Mixer
Click on the Input "Inst" button, and you will see a menu like this
Correctly installed 3rd party 64bit AU plugins will be in the AU Instruments sub-menu.
CCT

How to use Setup Assistant in Logic Pro 8?

How to use Setup Assistant in Logic Pro 8? I can't find it! even in the User Manuel!
Also, where can we setup the monitor number like we used to set '2 monitor ' in Logic Pro 7's setup assistant
Thanks!

I've been using Logic on two monitors for years. Screensets extend over all the monitors your computer sees, you can position windows on one, or the other, or size them to fit over both, so you can happily have for instance an arrange window on one monitor, and a mixer window on the other monitor, or stretch a giant arrange window over both...

TS4498 Is it possible to set italian language in Logic Pro X 10.0.6 ?

Is it possible to set italian language in Logic Pro X 10.0.6 ?

Unfortunately Logic Pro X does not have an Italian version:

Using Avg antivirus with Logic Pro ?

Is it a bad idea to use antivirus software with Logic Pro ? Thanks...! gtrdash

Very bad idea and completely unnecessary.
Barry

Is it possible to use a file from CS6 in CS5.5

I'm hoping to buy CS6 but I use CS5.5 at college. Is it possible to bring a file from CS6 into CS5.5. If not, where can I get CS5.5?

PS files are backward compatible if you save them with maximum compatibility enabled. likewise, AI files can be saved back to older versions. Of course in both cases specific features from CS6 will be lost or rasterized to pixels, so they are not editable in CS5.5. In Design might be a bit more tricky. It supports saving back to CS5.5, but this may completely ruin your documents, if you use the new dynamic layout features, Arabic text etc., so it's less useful to go that route.
Mylenium

Is it possible to use JSF file as as error page.

I am using jsf file as an error page.It is working in fine in websphere. But if i am using that only the exception is raised it is not going to error page.
In Web.XML file,
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<error-page>
<error-code>403</error-code> <location>/faces/unauthorized.jsp</location>
</error-page>
jsf codings are placed under *.jsp files. In the time submitting form data to server a method throws NumberFormatException. This exception information is displayed in console. but blankpage is coming . It is not redirected to error.jsp fle which is under faces/error.jsp.
If i am directly giving /error.jsp then it is giving Faces context is not created error.
So i tried use simple jsp(pure jsp) file wihtin the folder and i set path like /pages/foo.jsp. It is working.
Tell me is it possible to use jsf as error page.

What would you hope to do with the reference? The Mathscript node doesn't have a file reading capability. You need to read the file and pass the data into the Mathscript node.
EDIT: I stand corrected. You need to use the fopen and fclose functions inside of the MathScript node to be able to read a file inside of it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Is it possible to use .amr files in Logic Pro 9?

Similar Messages

Maybe you are looking for