Is it possible to use an 80W charger for a 13.3" MacBook?

I was just wondering because recently a family member purchased an 80W charger, as opposed to the customary 60W charger for MacBooks. Will this charger work?

If it has the proper MagSafe connector it will work.

Similar Messages

  • Is it possible to use one apple ID for my two private MacBooks?

    anybody there who can answer this question right now? Thanks

    Welcome to the Apple Support Communities
    You must use the same Apple ID on all your devices and computers

  • In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

    In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

    Yes but the iPhone chargers will struggle to charge the iPads ,they need more power than the iPhone chargers produce and with an iPad will charge VERY slowly
    The iPad chargers whether 10w or 12 will happily charge all your devices and Apple confirms the compatibility on the relevant web page.

  • What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

    what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
    I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
    How much trade-in value can I get from VZW or BestBuy or Amazon?
    Thanks!

    http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
    DROID Bionic:  (9/8 launch) – You already know everything about this device, don’t you?
    Samsung Stratosphere:  (9/8 launch) – 4G LTE device running Android 2.3
    HTC Vigor:  (10/6 launch) – Will replace the HTC Thunderbolt
    LG Revolution 2:  (10/20 launch) – Will replace the original Revolution
    Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
    Samsung Illusion:  (9/29 launch) – 3G smartphone running Android 2.3
    Samsung Plato:  (January launch) – whatever it is, it was pushed to 2012
    HTC Bliss:  (9/29 launch) – Lower end Android 2.3 device; the chick phone?
    Motorola XOOM 4G LTE:  (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

  • CAN I USE IPHONE 4 CHARGER FOR 4S?

    Can  i use my old iphone4 charger for my new iphone 4s?

    Yes, you can. You can use the same charger for all iPods/iPhones except the 5th gen iPod, iPhone 5, and iPad mini

  • Is it possible to use the same Switch for two different clusters.

    I have 10g Rac setup on windows.
    Now I am planning to install 11gR2 on different servers.
    Is it possible to use the same Switch for two different clusters.

    user9198027 wrote:
    I have 10g Rac setup on windows.
    Now I am planning to install 11gR2 on different servers.
    Is it possible to use the same Switch for two different clusters.
    Yes.  Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
    Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
    A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

  • Is it possible to use a still store for colorcorrection in FCP X like also exists similar to Color?

    Is it possible to use a still store for colorcorrection in FCP X like also exists similar to Color?

    DDo you want the image for comparison or to store the correction? If it's just for comparison, the roundabout way is to export a still frame and reimport it.

  • Can I use the car charger for my 3gs on my iphone 4?

    Can I use the car charger for my 3gs that i bough in the att store on my iphone 4?

    With the 3GS Apple dropped support for charging over the firwire pin on the dock connector. Some older chargers will only supply power over the firewire pin, and thus will not work. There are adapters that will fix this, here's one example:
    http://www.griffintechnology.com/products/firewire-to-usb-converter

  • Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

    Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

    Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
    Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
    There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
    ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
    http://www.stratospherix.com/products/filebrowser/
    Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
    A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
    You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste.

  • Is it possible to use Apple's fonts for commercial use?

    Is it possible to use Apple's fonts for commercial use?
    Thank you very much.

    Here's a look at the font agreement section from OS X Mountain Lion:
    E. Fonts. Subject to the terms and conditions of this License, you may use the fonts included with the Apple Software to display and print content while running the Apple Software; however, you may only embed fonts in content if that is permitted by the embedding restrictions accompanying the font in question. These embedding restrictions can be found in the Font Book/Preview/Show Font Info panel.
    So basically, you need to examine the fonts to see if there are notes on usage restrictions or limitations.

  • Is it ok to use my ipad charger for my iphone4?

    is it ok to use my ipad charger for my iphone4?

    Yes, but not the other way around. The iPad charger presents more current, which the iPad needs. It is plenty of current for the iPhone or iPod. (Don't worry, the device will only take the current needed, you won't burn it up or anything!)
    The smaller chargers provided with the iPhone and some iPods do not have enough current for the iPad.
    If you have both devices then it is best to get an extra iPad charger or 2 and then you can use it on any of your devices.

  • I've been using my ipad charger for my iphone 5 and ever since my sim card hasn't been working

    i've been using my ipad charger for my iphone 5 and ever since my sim card hasn't been working

    Using an iPad charger will not hurt your phone or the SIM. Contact your carrier for a new SIM.

  • Can i use new ipad charger for ipad 2 and vise versa

    I have ipad 2 and i bought new ipad for my dad. Both ipads charge quickly with ipad2 charger as compare to new ipad charger.
    So, my question is.. Is it okay to use new ipad charger for ipad 2 and vise versa...???

    The iPad 1, iPad 2 and new iPad all use the same 10W charger.
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
     Cheers, Tom

  • Can i use my ipad charger for my iphone 5

    can i use my ipad charger for my iphone 5

    can i use my ipad charger for my iphone 5
    The iPad charger can be used with any iPhone, iPad or iPod.
    http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter?fnode=3c

  • When i use my iPad charger for my iPhone 3gs, iPhone Is damaged?

    When i use my iPad charger for my iPhone, iPhone Is damaged?

    it is highly unlikely that an iPad charger can cause damage to an iPhone - see http://support.apple.com/kb/HT4327. I have personally charged my 3GS with an iPad charger many times without any problem.

Maybe you are looking for

  • How can I disable the access to windows 2000(O.S.) from LabView?

    I need to disable the access to windows when an application (exe), created by LabView, is running. When the application is running, the user can not acces to windows (for example, execute another application) until he stops the application. I am usin

  • Finding row attribute data in the debugger

    Open a Row object in the debugger and you get an incredible tangle of data with non-explanatory names. What I can't find is that actual attribute data that the Row holds. Is there any kind of general rule for finding it?

  • Problem Logging into only one of many computers

    1. I have two desktop computers. One is hard wired to a linksys router and works great. The other desktop that has a problem logging into my email account. See (5) below. 2. First you must know that I also have an apple mac that is connected via the

  • Is my SATA Interface failing?

    History: Macbook Pro 13" (late 2008 with Snow Leopard installed) would not shutdown. I left it on overnight hoping it would shutdown but it was still at a gray screen in the morning. So I force-powered it off by holding the power button. When powerin

  • Running SchemaTool without a database

    Is it possible to run SchemaTool without a database? I want to generate the SQLs during the build process and use them to create the tables during deployment. I tried putting a <persistent-types> block in system.prefs so that SchemaTool will not try